Wish to retrieve data from structure

hi all.
i have structures and fields to dispaly and want to retrieve data from them.please guide me with the tables available with me where i can link them for the primary key combination.
RV13A-VAKEY1 and komv-kpein,komv-kmein are the structure-fields for which i want to display.
and available tables are vbak ,vbap ,konv ,cdhdr , cdpos .
waiting for the reply.

i want to link the RV13A and komv with the existing tables that i mentioned...
it is not the konv that i want to connect with.
kindly suggest accordingly.

Similar Messages

How to retrieve data from database to the structure(complicated)

Hello everyone:
I want to retrieve data from database to the structure. but the structure defined like this below:
TOLERANZOB LIKE QAMV-TOLERANZOB
TOLERANZOB1 LIKE QAMV-TOLERANZOB
so how can I retrieve the data from the database ? make sure that the two fields contain data both.
Thanks in advance .
Regards
Nick

Hi Nick,
To retreive data for TOLERANZOB from QAMV,
If you know the key fields then use
SELECT SINGLE TOLERANZOB FROM QAMV INTO TOLERANZOB WHERE keyfields.
else, you can use
SELECT TOLERANZOB FROM QAMV UPTO ONE ROWS INTO TOLERANZOB WHERE....
Once you retreive the data using the select query, you can check if it is initial and if not move the data from TOLERANZOB to TOLERANZOB1.
<b>Reward points for helpful answers.</b>
Best Regards,
Ram.

Retrieving data from Excel format to internal table(deep structure)

hi all,
can anybody help me how to Retrieving data from Excel format to internal table(deep structure)
and if u have any sample code for that please send it.
my internal table is like this
DATA: BEGIN OF ty_text,
vbeln TYPE vbeln,
posnr TYPE posnr,
seqno TYPE seqno,
textid TYPE tdid,
tdline TYPE tdline,
END OF ty_text.
DATA: BEGIN OF ty_item,
vbeln TYPE vbeln,
posnr TYPE posnr,
dispct1(16),
dispct2(16),
dispct3(16),
text LIKE table of ty_text,
END OF ty_item.

hi,
check this code
TABLES:zmatnr.
TYPE-POOLS truxs.
DATA : itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA row LIKE alsmex_tabline-row.
data : gi_final like zmatnr occurs 0 with header line.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER : pfname LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfname.
PERFORM search.
START-OF-SELECTION.
perform process.
form process.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = pfname
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 12
      i_end_row               = 65000
    TABLES
      intern                  = itab
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
describe table itab lines itab_count.
   row = 1.
loop at itab.
    if itab-row <> row.
      append gi_final.
      clear gi_final.
    endif.
    case itab-col.
      when '1'.
      gi_final-MATNR = itab-value.
      when '2'.
       gi_final-Maktx = itab-value.
      endcase.
    row = itab-row.
endloop.
append gi_final.
clear gi_final.
endform.
FORM search .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = pfname.
ENDFORM.
regards
siva

How to retreive data from structure MDEZ in T.code CO09

As per our requirement 2 new columns are needed in a customize report .i.e
- u201Cinc. lot dateu201D
- u201Cavailable inc. lotu201D
u201Cinc. lot dateu201D:to get the values for inc.lot.date
From second screen of CO09(program: SAPLATP4 and screen number: 400) pick first date where MRP element is u201CPOitemu201D, u201CShpgNtu201D or u201CPrdOrdu201D.
u201Cavailable inc. lotu201D: to get the values for available inc.lot
Pick u201CCum. ATP QTyu201D from the same row.
These data are stored in structure MDEZ. Actually I want dat00 and MNG04 based on field DELB0. If DELB0 filed is POitem or Prdord or ShpgNt then only I should retrieve the dat00 and MNG04. IF there are more than one POitem in MRP element then we should pick the first POitems' mrp date and *** ATP qty .Can you please help me out how to get these data from the structure MDEZ.
input parameters to get the values are material number and plant.

Hi,
First of all data is never stored in structure so there is no way you can retrive data from structure.
you are looking into the screen field and it is not mandatory that it will always point to a table.
Now the qestion remains how to get the data ? you need to find database table for that field there are many ways like SE84 or SE11 where used etc.
Try to find the table if you still have the problem feel free to get back.
Regards
Bikas

Retrieving data from Payroll clusters u0085

Hi ,
         Can any one help me , How to retrieve data from payroll clusters , For example take payus_result (structure ) and I want to retrieve data from PC208 and PC209 . Can any one give step by step process how to do this?
I am working with HR ABAP. Mostly working with Payrolls. So I want to know this. Plz help me in this ASAP.
Thanks & Regards,
K Venkata Suresh

Hello,
you have to read the cluster like this.
Tables : pcl1, pcl2.
temp.variable to hold the payroll period
DATA : g_f_pper LIKE pc261-fpper .
DATA : g_f_seqnr LIKE pc261-seqnr.
Cluster Definition.
INCLUDE rpc2cd00.          "Cluster CD Data-Definition
INCLUDE rpppxd00.          "Data-Definition Puffer PCL1/PCL2
INCLUDE rpppxd10.          "Common Part Puffer PCL1/PCL2
INCLUDE rpppxm00 .
INCLUDE rpc2rx02 .
INCLUDE rpc2rx39 .
INCLUDE rpc2ca00 .
INCLUDE rpc2rdd1 .
INCLUDE rpc2rx29 .
INCLUDE hdepaymacro .
Get the payroll period
CLEAR : g_f_pper.
CONCATENATE pn-begda0(4) pn-begda4(2) INTO g_f_pper .
fill the keys for the CU cluster
cd-key-pernr = pernr-pernr.
import from the cluster CU
CLEAR: rgdir, g_f_seqnr.
REFRESH rgdir.
rp-imp-c2-cd.
IF rp-imp-cd-subrc = 0 .
    IF NOT rgdir[] IS INITIAL.
      SORT rgdir BY fpbeg DESCENDING.
      LOOP AT rgdir WHERE fpper EQ g_f_pper
                   AND   srtza EQ 'A'. " Active          g_f_seqnr = rgdir-seqnr.
      ENDLOOP.
    ENDIF.
ENDIF.
fill the RX key and then import the cluster
rx-key-pernr = pernr-pernr .
CLEAR : rx-key-seqno.
UNPACK g_f_seqnr TO rx-key-seqno .
CLEAR rt.
REFRESH rt.
rp-imp-c2-rd.
IF rp-imp-rd-subrc = 0.
   LOOP AT rt WHERE lgart = '9230'. RT " Result table
move the values here
   Endloop.
ENDIF.
Reward if helps.
Thanks,
Krishnakumar

Retrieving data from Clusters

hi,
I need to develop a report for pay roll.
one of the field called "Net Sal" from a cluster.
How do i retrieve data from the clusters?
Thanks & Regards
Chetana

hi
plz refer the following program and use logical database PNP in the LDB section and modify the wagetypes in rt-lgart in the program to suit ur needs.
reward points if it helps!!
gunjan
*& Report ZHR_PAYROLL
REPORT ZHR_PAYROLL.
TABLES: PCL1,PCL2,PERNR,PA0001,PA0002,PA0008.
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer
INCLUDE RPPPXD10. "Common part buffer PCL1/PCL2
INCLUDE RPPPXM00. "Buffer Handling routine
*COUNTRY SPECIFIC INCLUDE
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09. "Data Definition for Cluster RD in PCL2
*For Error records
DATA: BEGIN OF HR_ERROR OCCURS 10.
        INCLUDE STRUCTURE HRERROR.
DATA: END OF HR_ERROR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:P_PAYTYP LIKE PC261-PAYTY,
            P_RUNDAT LIKE PC261-BONDT.
SELECTION-SCREEN END OF BLOCK B1 .
DATA: BEGIN OF T_MAIN OCCURS 0,
W_PERNR LIKE PA0001-PERNR,
W_ENAME LIKE PA0001-ENAME,
W_GROSS TYPE P DECIMALS 2,
W_SALARY TYPE P DECIMALS 2,
END OF T_MAIN.
START-OF-SELECTION.
GET PERNR.
PERFORM GET_RT_DETAILS.
END-OF-SELECTION.
PERFORM DISPLAY_RESULT.
*&      Form GET_RT_DETAILS
      text
--> p1        text
<-- p2        text
FORM GET_RT_DETAILS .
CLEAR RGDIR.
**IMPORT CLUSTER RESULTS FROM CLUSTER DIRECTORY**
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
RETURN CODE FROM IMPORT.
IF RP-IMP-CD-SUBRC <> 0.
MESSAGE S124(HRPADIN01) WITH PERNR-PERNR.
Payroll results not found for the employee no. &
    PERFORM BUILD_ERROR TABLES HR_ERROR
                        USING PERNR-PERNR 'HRPADIN01'
                        '124' PERNR-PERNR SPACE SPACE SPACE.
    REJECT.
ENDIF.
=====================================================================
SAPGUI Progress indicator
=====================================================================
MESSAGE w_progress TYPE 'S' DISPLAY LIKE 'I'.
SORT RGDIR BY FPPER DESCENDING.
LOOP AT RGDIR WHERE FPBEG GE PN-BEGDA AND FPEND LE PN-ENDDA
AND SRTZA = 'A' AND PAYTY = P_PAYTYP AND BONDT = P_RUNDAT.
   PERFORM progress_indicator.
**IMPORT RESULTS FROM INDIA PAYROLL CLUSTER**
    RX-KEY-SEQNO = RGDIR-SEQNR.
    RX-KEY-PERNR = PERNR-PERNR.
    RP-IMP-C2-IN.
RETURN CODE FROM IMPORT.
    IF RP-IMP-IN-SUBRC <> 0.
      CONTINUE.
    ENDIF.
    PERFORM FILL_T_MAINTAB.
ENDLOOP.                           " RGDIR
ENDFORM.                    " GET_RT_DETAILS
*&      Form FILL_T_MAINTAB
      text
--> p1        text
<-- p2        text
FORM FILL_T_MAINTAB .
LOOP AT RT.
    CASE RT-LGART.
      WHEN '/101'.
        ADD RT-BETRG TO T_MAIN-W_GROSS.
        CLEAR RT-BETRG.
      WHEN '1002'.
        ADD RT-BETRG TO T_MAIN-W_SALARY.
        CLEAR RT-BETRG.
    ENDCASE.
ENDLOOP.
APPEND T_MAIN.
CLEAR T_MAIN.
ENDFORM.                    " FILL_T_MAINTAB
*&      Form BUILD_ERROR
      text
     -->HR_ERROR   text
     -->$PERNR     text
     -->$MSGID     text
     -->$MSGNO     text
     -->$MSGV1     text
     -->$MSGV2     text
     -->$MSGV3     text
     -->$MSGV4     text
FORM BUILD_ERROR TABLES   HR_ERROR STRUCTURE HR_ERROR
                 USING    $PERNR
                          $MSGID
                          $MSGNO
                          $MSGV1
                          $MSGV2
                          $MSGV3
                          $MSGV4.
HR_ERROR-PERNR = $PERNR.
HR_ERROR-ARBGB = $MSGID.
HR_ERROR-MSGTY = 'E'.
HR_ERROR-MSGNO = $MSGNO.
HR_ERROR-MSGV1 = $MSGV1.
HR_ERROR-MSGV2 = $MSGV2.
HR_ERROR-MSGV3 = $MSGV3.
HR_ERROR-MSGV4 = $MSGV4.
APPEND HR_ERROR.
ENDFORM.                    "BUILD_ERROR
*&      Form DISPLAY_RESULT
      text
--> p1        text
<-- p2        text
FORM DISPLAY_RESULT .
LOOP AT T_MAIN.
    FORMAT COLOR 1.
    WRITE:/12 T_MAIN-W_PERNR,22 T_MAIN-W_ENAME,56 T_MAIN-W_GROSS,67 T_MAIN-W_SALARY.
ENDLOOP.
ENDFORM.                    " DISPLAY_RESULT

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

Failed to retrieve data from the database. [Database Vendor Code: 116]

My report is using Java Bean class as datasource and the Java Bean class calls a report-specific Java program to return a result set.
Report fails to generate and the error message is
Failed to retrieve data from the database. Details: [Database Vendor Code: 116 ]
Can anyone tell me what error code 116 means?
Thanks.

The problem is solved internally. Our team implemented a result set data structure that incorrectly converts a Double into a String before passing it to Crystal Report for rendering. Data Vendor Code I met yesterday was the outcome of illegal class conversion.
I have a side question; our development team would like to use log4j to log method calls invoked during rendering. Our problem could be solved earlier if we knew getString() was invoked instead of getDouble() during rendering. We thought of specifying the full path of log4j jar file in CRConfig.xml but we don't know how to configure CR to write logging information into a specific file location.
Please help.
Thanks

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

How to retrieve data from edcauditentity table?

Hello!
I am interested how to connect to edcauditentity table and retrieve data from this table.
I have sql query but i don't have idea how to start. For now i can connect to LiveCycle and retrieve policy name.
Thank in advance!

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.

Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry

Retrieve data from a list in SharePoint 2013 provider hosted App using CSOM

I have developed a provider hosted app in SharePoint 2013. As you already know, Visual Studio creates web application and SharePoint app. The web application gets hosted inside IIS and the SharePoint App in SharePoint site collection. I'm trying to get
data from a list hosted in SharePoint using CSOM. But I get ran insecure content error.
here is my code in Default.aspx
<script type="text/javascript" src="../Scripts/jquery-1.8.2.js"></script>
<script type="text/javascript" src="../Scripts/MicrosoftAjax.js"></script>
<script type="text/javascript" src="../Scripts/SP.Core.js"></script>
<script type="text/javascript" src="../Scripts/INIT.JS"></script>
<script type="text/javascript" src="../Scripts/SP.Runtime.js"></script>
<script type="text/javascript" src="../Scripts/SP.js"></script>
<script type="text/javascript" src="../Scripts/SP.RequestExecutor.js"></script>
<script type="text/javascript" src="../Scripts/App.js"></script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
<input id="Button1" type="button" value="Get title via CSOM" onclick="execCSOMTitleRequest()" /> <br />
<input id="Button2" type="button" value="Get Lists via CSOM" onclick="execCSOMListRequest()" />
</div>
<p ID="lblResultTitle"></p><br />
<p ID="lblResultLists"></p>
</form>
</body>
</html>
and App.js is:
var hostwebUrl;
var appwebUrl;
// Load the required SharePoint libraries
$(document).ready(function () {
//Get the URI decoded URLs.
hostwebUrl =
decodeURIComponent(
getQueryStringParameter("SPHostUrl")
appwebUrl =
decodeURIComponent(
getQueryStringParameter("SPAppWebUrl")
// resources are in URLs in the form:
// web_url/_layouts/15/resource
var scriptbase = hostwebUrl + "/_layouts/15/";
// Load the js files and continue to the successHandler
//$.getScript(scriptbase + "/MicrosoftAjax.js",
// function () {
// $.getScript(scriptbase + "SP.Core.js",
// function () {
// $.getScript(scriptbase + "INIT.JS",
// function () {
// $.getScript(scriptbase + "SP.Runtime.js",
// function () {
// $.getScript(scriptbase + "SP.js",
// function () { $.getScript(scriptbase + "SP.RequestExecutor.js", execCrossDomainRequest); }
function execCrossDomainRequest() {
alert("scripts loaded");
function getQueryStringParameter(paramToRetrieve) {
var params = document.URL.split("?")[1].split("&");
var strParams = "";
for (var i = 0; i < params.length; i = i + 1) {
var singleParam = params[i].split("=");
if (singleParam[0] == paramToRetrieve)
return singleParam[1];
function execCSOMTitleRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
//Load Web.
context.load(this.web);
context.executeQueryAsync(
Function.createDelegate(this, successTitleHandlerCSOM),
Function.createDelegate(this, errorTitleHandlerCSOM)
//success Title
function successTitleHandlerCSOM(data) {
$('#lblResultTitle').html("<b>Via CSOM the title is:</b> " + this.web.get_title());
//Error Title
function errorTitleHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM call: " + errorMessage);
function execCSOMListRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
// Get the Web lists.
collList = this.web.get_lists();
//Load Lists.
context.load(collList);
context.executeQueryAsync(
Function.createDelegate(this, successListHandlerCSOM),
Function.createDelegate(this, errorListHandlerCSOM)
//Success Lists
function successListHandlerCSOM() {
var listEnumerator = collList.getEnumerator();
$('#lblResultLists').html("<b>Via CSOM the lists are:</b><br/>");
while (listEnumerator.moveNext()) {
var oList = listEnumerator.get_current();
$('#lblResultLists').append(oList.get_title() + " (" + oList.get_itemCount() + ")<br/>");
//Error Lists
function errorListHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM Call: " + errorMessage);
Any solution is appreciated.

Hi,
To retrieve data from list in your provider-hosted app using SharePoint Client Object Model(CSOM), you can follow the links below for a quick start:
http://msdn.microsoft.com/en-us/library/office/fp142381(v=office.15).aspx
http://blogs.msdn.com/b/steve_fox/archive/2013/02/22/building-your-first-provider-hosted-app-for-sharepoint-part-2.aspx
Best regards
Patrick Liang
TechNet Community Support

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
                - Tools
                - SQL syntax
                - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
                     Of course, you only need to install the client software if you are using BW with a non-Oracle database.
                     Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
                     After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
                     We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
                     To provide U data for users other than U, you can create views on other user tables as user U:
                     CREATE OR REPLACE VIEW viewname AS
                       SELECT * FROM QDB.tablename
                     You may have to grant SELECT privileges to user U in the QDB schema:
                        GRANT select ON QDB.tablename TO U
                     Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
                     !!! Synonyms do not yet work!!!
                     Synonyms that you can create as described below are another option for providing a complete table for the user U:
                       CREATE SYNONYM synoname FOR QDB.tablename
                     !!! Synonyms do not (yet) work!!!
                     After you have displayed the require data for user U, you can simply use
                       SELECT * FROM <view or table>
                     on the Q system to check which data is returned.
                     You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
      Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
    SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
      where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
       TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
       'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

Retrieve data from a dynamic page via loadURL

Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.

loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==--

Wish to retrieve data from structure

Similar Messages

Maybe you are looking for