With holding tax tab not showing up in MIRO

Hi,
Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
Thanks

Hello Shruti,
Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
And also check on the MRIO screen, have you checked "calculate tax" under general tab.
Hope it will help you
Thanks
Para

Similar Messages

  • Re: With holding tax is not picking up while excution of RERAPP

    Dear team,
    While executing the RERAPP.With holding tax is not picked.We are working on 4.7 version.We had suggested a badi to pull the with holding tax field.Still system is not showing any caluculation.Plz advice us if any one of you did the immplimenttation in 4.7 and how you resolved this problem .So that it would be help ful for us too.Please do the need ful.
    Regards,
    Suma.

    Dear Sir,
    What we did is all the with holding tax data include the basic amount calculations manually in excel there after  given the input to the system through accounting interface. You can try with your abaper. Plz make sure that GL code length and currency .This has been done through so much work around. Technical person will guide you .If you still facing the problem where exactly your facing then i can help you out.Please be more clear what you did till now then only i can explain you with clarity.
    Regards,
    Suma.

  • With-holding tax not updates

    Hi,
    While doing MIRO the with-holding tax tab is not getting updated. but when I view the accounting document the TDS is getting posted to the correct G/L and the amount is correct.  I have maintained in Vendor master the with-holding tax.
    Please suggest where to configure this.
    Regrds,
    Raziq

    Dear MAURIZIO BIANCOTTI,
    What you meant to say is while doing MIRO, in with-holding tax tab both with-hold type and code will be updated other fields will not be updated.
    for Example...
    1. If invoice amount is 10000 and if I want to tax for only 5000 then i can manually enter the base amount in the field and the system will calculate the percentage from the based amount only is it.
    2. if the invoice amount is 10000 and if i want to tax for the whole amount then the system will only enter the with-hold type and code, the base amount will not be take by the system but when posting the document the system calculates based on the invoice.
    i am right or wrong.. please reply
    regards,
    Raziq.

  • With holding tax base amount is not showing in miro screen

    Dear All
    Whith holding tax amount is not showing in withholding tax tab after all posting also.
    but with holding tax posting is going on fine. in miro screen in withholding tax tab i am not getting this value correctly but it is showing 0 value.
    help me in this regard.
    Regrds,
    Sami

    Dear Sami,
    if the WT datas are zero in MIRO/MIR4 this is due to the Standard System Design. Usually You will have the correct WT data only into the FI follow on document. Only if You insert WT datas manually (wt base amount, wt amount) these will be saved into MIRO/MIR4 as well.
    I hope this helps in understanding the System behaviour.
    Have a nice day.
    Mauri
    Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM
    Edited by: MAURIZIO BIANCOTTI on Oct 26, 2009 2:22 PM

  • With Holding Tax provided in IDOC FIDCC2 is not getting updated in Acc Doc

    Hi All,
    I am Posting a Accounting document in R/3 though Idoc FIDCCP02.
    This idoc has  With holding Tax info segment as E1FIXWT.  i gave all the info in this segment, like Tax code, Tax type , Withholding tax base amount (local currency) , Withholding tax base amount in document currency, Withholding tax amount (in local currencyand Withholding tax amount in document currency
    However, when the Idoc gets posted,and the accounting document gets generated the With holding tab does not get  populated in SAP.
    Please let me know your inputs, that why the woth holding tab is not getting populated with the relevant info from Idoc.
    Thanks in advance

    Hi,
    I have the same issue. But as the idoc is generated in a SAP system of the same release I would have expected that the withholding tax data is already complete. Also are no withholding tax info populated in IT_ACCTX. There only VAT is visible. I suppose IT_ACCWT was meant.
    Anyone any idea?
    Regards
    Stefanie

  • With Holding tax On Down Payment not picking

    Dear All,
    I have configured with holding tax on Payment posting, assigned to vendor,company code it is working fine for invoice positng and vendor payment.
    When I am trying to post down payment f-48 the with holding tax codes selection screen is not pop-up or it calculates with holding tax.
    Why the with holding tax selection tax is not displaying.
    B.S.Rao

    Hi,
    1. Please check withholding tax type is assigned to the company code, IMG: Withholding tax>Extended withholding Tax>Company Code>Assigned Withholding Tax Types to Company Code.
    Note: also check the here the proper dates u201Cw/tax obligated frmu201D and u201COblig.to w/tax untilu201D e.g. 01.01.1900 and 31.12.9999.
    2. Go to OBWW also check the GL is assigned or not.
    3. Also check the field status of recon. account & alternative recon account assigned for special GL for down payment, fields e.g withholding tax code and withholding tax amounts etc. should not be suppressed.
    Thanks
    Javed

  • Taxes are not showing in PO for a plant

    Hi,
    We have a Purchase Order with Plant1 and using a Tax Code with CST Condition. In the PO Item Details, the Taxes are displaying when I click the 'Taxes' button in the 'Invoice' Tab. But, when I use the same details (all details, including Tax Code) to create another PO for Plant2 (Plant1 &2 belong to same company code), the Tax Details are not displaying. Clicking on the 'Taxes' button had no effect.
    The Tax Code is maintsained correct and the Conditon record also maintained at Country / Tax Code level (checked in FV13)
    Why the Tax details not showing for Plant 2 ? Please give a solution..
    regards
    Arun.

    If you have assigned the tax code to the company code under SPRO>Logistics general> Tax on goods movement
    It should work for both the plants unless  that plant is not under that company code.
    Are all the tax codes behaving in the same way or its only a particular tax code.
    Regards
    Sangeeta

  • With holding tax exempt in reporting currency?????????/

    Hi friends,
    We do not do any with holding, so we have configured witholding tax functionality with 0%
    now when I ran the 1099-misc report , it shows that certain invoices has portion of amount going into with holding exempt in reporting currency and did not show year to date payments on 1099 report.
    Amount for with holding base does not tie up with payments made to them and so year to date payments does not tie on 1099 report.
    please help.
    Uergent
    points to useful answsers
    Thanks

    please help!!!!!!

  • WITH HOLDING TAX ON DOWN PAYMENT

    HI
    I am  using TCode F-47 for down payment request to be paid to vendor. In Vendor Master Record with holding tax information is activated. But at the time of processing payment against down payment request using TCode F-58 With holding tax not deducted and full down payment requested amount getting debited to vendor.
    Pl suggest me
    Message was edited by:
            Chandrakant.K Acharya

    Hi Chandrakanth
    u check once WHT settings at WHT type for Payment posting.here you remove inherit base option. for Cess claculating on TDS.
    you check once define WHT codes for cess. here you calculate  for 1% cess 0.022 % on TDS base amount or invoice amount. ex: inv: 100 , TDS 2.2 %. Cess 1% on 2.2% means 0.0220. like that you calculate.
    Then you update cess tax codes in FK02,here u  select liability option.
    Then you can use f-47. here system showing popup with Base amount,TDS & cess codes.then you save it.
    now you check with f-58. other wise you want temporly solution. go to FB02 change doc. there you can modify WHT amounts then save it.
    ok all the best
    Raj

  • With holding tax decuction from T.Code F-02 with out sp. gl indicator

    Hi All,
    While making the payt to service vendor my client do not want to use the functionality of advance payt, which can be performed through T.code F-48. They wants to treat this advance payt as a normal payt to vendor but they want to deduct the with holding tax from this payt.
    I have tries to use T.code F-02 with posting keys 25 Dr Vendor & 50 cr Bank. But when i am using this posting key for vendor (i.e.25) System gives me warning message saying with holding tax information is ignored & system do not deduct TDS from the payt made to vendor.
    But when i am using PK 29 with sp gl indicator A for advances from T.Code F-02 system allows me to deduct the with holding tax against vendor paytment.
    Please guide me how to duduct the with holding tax from vendor payt. without using sp. GL indicator for advances.
    Thanks
    Sonal

    Hi
    why ur clien not want advance paymeny through Special GL, what is the issue/purpose
    see TDS deducted at the time of Advance payment and at the time of invoice
    when u use F-02 for TDS deduct of vendor without using special GL and u useing 25 vendor and 50 bank
    in this case tds not deducted here vendoir is debit but withouse advance indicator
    becuase u given vendor advance , but in this case entry not showing advance or
    in SAP Standard system TDS deducted of advance payment when u using 29 posting key for vendor this is stsndard key of advance vendor
    so convience ur clien u use Advance payment method with Special GL, if they not agree then ask what is the purpose u not using Speacial GL through Advance paument
    if any query, revert back
    Regards
    Roobal

  • With holding tax code for posting while caluclation step

    Hello gurus,
    can you let me know in the configuring check boxes what i have missed out,
    while posting vendor invoice i am not able to get the tax amount and net invoice amount.
    thanks
    Pranam

    hi,
    check in your config if u have put tick mark under the tab With holding tax posting i.e posting with payment.
    this will make you to calculate and post the tax amount during payment.
    thanks
    G.Bharathi

  • Reg: Correction of Wrong  With holding tax  amount  Values Posted via BAPI

    Hello Experts,
    I have posted some invoices using BAPI_ACC_DOCUMENT_POST with With holding tax code and amount now the thing is that ..the document is posted successfully  with Wrong  With hoding tax amount data in TABLE WITH_ITEM due to this while executing t-code F-53 ( Outgoing payments )   its not calculating the with holding tax amount for the invoice .
    Now i wan't to correct ( Negate some values) the values in  WITH_ITEM table.....
    How am i going to do it..!
    Plz..experts help.
    Plz waiting for your input

    Dear All,
    this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
    I hope this helps.
    Mauri

  • Vendor document With-holding tax

    I encounter one issue, one of my vendor document, in line item1, additional details, it shows Disc. Base: 3200 THB, but if we go to
    tax tab, it shows: tax at payment , witholding tax base: 3000 THB, why two Disc base is different?

    What is GST?
    Gross Sales Tax?
    Where is the TDS entry?
    If it is not TDS related, it seems the base amount is Net amount and it is calculating Net amount
    Net amount = 3200
    GST = 10%
    GST Value = 3200*10/100  = 320
    Vendor has been credited with 3520
    As per my knowledge, TDS entry comes a below
    31...Vendor.....4500 INR
    40...Raw material.....5000 INR
    50....TDS Amount......500 INR
    Just confirm on the above queries
    Thanks

  • With holding tax report with material and qty fields

    Dear All,
    Is there any standard report available with with holding tax data with material and qty fields.
    Thanks,
    Sekhar.

    dear Friend,
    Withholding tax will deduct on services. Hence Material and quantity is not relavent.
    There is no report is available also.
    reg
    Madhu M

  • Customer master with holding tax data

    Hi,
    I am working on customer master transaction 'XD01'. I want add new fields to the existing subscreen 'with holding tax' and new fields in the new subscreen. There is  no enhancement is available for this, but there a BADI 'CUSTOMER_ADD_DATA_CS'. But with this we can not update the data to table KNBW(with holding tax data). Can anybody worked on this type of requirements.
    Thanks in Advance
    Rajavardhana Reddy

    Hi Rajavardhana
    Here there two interfaces you can use for transfering data to database and getting data from database.
    SET_DATA     Data Transfer
    GET_DATA     Transfer Data
    Hope this helps you.
    Cheers
    Manohar

Maybe you are looking for