With Oki ML395 and Epson FX-1170 printers the paper size is incorrect
I've tried printing to an Oki ML 395 and an Epson FX-1170 (both dot matrix), through code, but the paper size is never the one that I configured.
The behaviour is the same for both printers.
I have set the Oki printer as the Windows default and also the report default, and chose the paper size "Fanfold 210mm x 12 in".
Then, when I preview the report, click the button to print and access the print options the paper size selected is always "Letter".
If I don't preview first, the print is always done with paper size "Letter".
I tried it on the designer and it works ok.
I tried changing the paper size to "A4" and it also works ok. Some paper sizes are correctly identified, while others are not and in theat case its used the paper size "Letter".
In these cases the CR used is 2008 SP3 and the .NET framework is 3.5 SP1.
My OS is Windows Vista but I have also seen this happen in XP, and the drivers installed are the ones from the OS.
I have also checked if the printers are unicode compliant and there is no mention on the specifications.
I've seen some issues with these kind of printers, but never this.
Can anyone help?
Thanks
Considering that the Epson printer driver was last updated in 2003 and the Oki printer has never been updated I highly doubt they are unicode compliant.
You may try to determine the enum of the page size and pass that to the report, but that is the only idea I have...
The attached devcap utility may help.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Similar Messages
-
When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!
Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings. -
My ipod screen is cracked and i can't sync my ipod to itunes because it is locked with a password and i can't enter the password because the heat sensor is messed up on the ipod becasue of the screen and i don't want to restore it and lose everything. What can i do?!
All you can do is to restore and thus erase the iPod unless you can get a data recovery company to preserve the data.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipod classic will sync with my itunes and it shows me all the songs have been downloaded. however when i disconnect it i only have 50 songs present on my ipod. in the settings it still tells me 15 GB is being used up. i have dowloaded nothing onto it but music. i cant find the rest of my songs on it. what do i do?
Restore the iPod.
tt2 -
I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.
You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)? -
How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
-
I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?
You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.
-
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
My iPad camera photos will wirelessly sync with my iMac and iCLoud photo stream, but the videos do not, is USB connection the only way to transfer videos or is there also a wireless method?
Videos are not included with the Photo Stream. Photo Stream is for photos only.
There is not a wireless method for importing videos from the iPad's Camera Roll. -
I am in recovery mode with my ipad, and a few seconds into the upload, i get an error message 3259. What does this mean?
see these for some suggestions.
http://support.apple.com/kb/ts2799
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
This is mosat likely firewall or security related - soething is blocking you connection., -
I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!
Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G -
Suddenly with version 9 and 10 i cant use the shortcut command of ctrl+shift+t to open the most recently closed tab. a feature used several times a day, previously. This is very Frustrating to me, i have tried looking up a tool keyconfig 20110522 and looked that it says that ctrl+shift+t is the right command, but i still cant use it WHY oh WHY?? if i could get some help figuring this out it would be so awesome, cause i love Firefox, been using it almost daily for the last 10 or so years and i don't intend to switch soon.
Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] This is a temporary diagnostic session and you can exit anytime and start Firefox normally again. This session disables all the '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized, trys to connect using the back (curved) edge of the magnetized bracket. When I try to attach it, it moves around causing the device to toggle in a way that looks like the camera flash. Anyone having problems? Help.
Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch
Maybe you are looking for
-
I'm trying to install windows 7 as a dual boot. I downloaded easybcd to take care of the dual boot start selection. Then proceeded with usb instal which didn't work. So I then downloaded the iso and burned to disk. Which wouldn't load (yes bios had d
-
Hi can any one tell me which tables are used in MIGO and if possible field names aslo .
-
PowerBI & Azure Stream Analytics jobs login issue
Hello team, We are working as early-adopter partner for Azure Stream Analytics along with azure IoT suite, we recently have got 'PowerBI' services enabled as 'output' connector of stream analytics job on our corporate subscription & accessing our sam
-
EDI Seperator Channel Issue - Single EDI File is Creating Two IDOCs
Hi Experts, We are facing a strange issue in our project. We are working on SAP PO 7.4 SP06. Our's is an EDI to IDOC Scenario. We are using standard EDI XSD's generated by B2B 2.0 Cockpit. Since yesterday our Quality server is behaving strangely.
-
Impossible to download photoshop creative cloud
Hello, I have suscribed in august a one year photoshop creative cloud license. I had recently to reload Windows 8.1, now I can't download creative cloud anymore. I have tried many times. Once appeared a red message reading someting like "we can't dow