With Out Derivation in Char relationship

Hi,
I am trying to understand the concept of char relationship with derivation and without derivation. I would request you to please tell me the basic difference between with and with out derivation?
we can say that,  with derivation is used to derive certain values based on a relationship. So what exactly with out derivation does in input ready query and automatic planning scenarios?
Please give me an example to use with out derivation.  I have read the help document, but it is not clear.
Regards
Sreekanth

Hi Diogo,
So according to your explanation: the conclusion is : both with derivation and without derivation checks valid combinations.
with derivation - apart from checking combination - it also derives the value. In this case,
        if the target char is not in the aggregation level/query, then the target value is derived according to master valid combination.
       if the target char is also in the aggregation level, then it only checks the valid combinations, it does not derive any thing.
With out derivation - it can't derive any char. it only checks the valid combination. both  chars need to be in the aggregation level.
          is this correct?

Similar Messages

  • CHAR RELATIONSHIP error in SEM BPS planning sequence

    Hi,
    I'm executing a planning sequence with 2 planning functions.
    1st being "Exit  funciton" & 2nd being "Repost funciton".
    I've a "characteristic relationship of type attribute"  defined at the planning area level.
    Am getting CHAR RELATIONSHIP check error when am executing this sequence.
    EXIT function gives blank values for a characteristic that is used in "characteristic relationship".
    But, REPOST function adjusts this blank characteristic value to actual value which will be correct when "CHARACTERISTIC RELATIONSHIP" is checked.
    When I execute sequence, EXIT function gets executed & CHAR RELATIONSHIP errors are being displayed before "REPOST" function is being executed.
    Is there any other approach to deal this scenario? like checking CHAR RELATIONSHIP after REPOST funciton execution?
    I can execute REPOST funciton from "EXIT FUNCTION" using API_SEMBPS_FUNCTION_EXECUTE, but this doesn't suit my needs.
    Please note that I've a need to use 2nd planning function rather deriving characteristic relationship from the EXIT function.
    Appreciate any ideas/thoughts.

    Hari,
    each function must produce results that adhere to the rules specified as characteristic relationships. BPS will always execute the char.relationships after the exit function. You might be able to avoid this by adjusting the characteristics in your planning level.
    Calling another function (like REPOST) from within an exit is not possible since BPS needs to finish processing the exit first, before it can run the repost.
    Regards
    Marc
    SAP NetWeaver RIG

  • Select with out into in plsql

    hi all
    i want to write a select statment in a procedure with out into statement ..
    is it possilbe if yes how can i do this.
    if its not possible then if we have to Return a number of rows from procedure then how can i do this..
    thanks in advance

    User1728 wrote:
    actual i want to return a datatable type data from procedureWhat does "datatable type" mean? "Datatable" is not a type in PL/SQL, so I assume that it has some meaning in your client programming language. What Oracle data type are you trying to return?
    My guess would be that you are trying to return a REF CURSOR so that you want something like
    SQL> create procedure return_rc( p_rc OUT sys_refcursor )
      2  as
      3  begin
      4    open p_rc for select * from emp;
      5  end;
      6  /
    Procedure created.
    SQL> variable rc ref cursor;
    Usage: VAR[IABLE] [ <variable> [ NUMBER | CHAR | CHAR (n [CHAR|BYTE]) |
                        VARCHAR2 (n [CHAR|BYTE]) | NCHAR | NCHAR (n) |
                        NVARCHAR2 (n) | CLOB | NCLOB | REFCURSOR |
                        BINARY_FLOAT | BINARY_DOUBLE ] ]
    SQL> variable rc refcursor;
    SQL> exec return_rc( :rc );
    PL/SQL procedure successfully completed.
    SQL> print rc
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
        DEPTNO
          7369 SMITH      CLERK           7902 17-DEC-80        800
            20
          7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300
            30
          7521 WARD       SALESMAN        7698 22-FEB-81       1250        500
            30
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
        DEPTNO
          7566 JONES      MANAGER         7839 02-APR-81       2975
            20
          7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400
            30
    <<more data snipped>>Justin

  • How to poll a blob using db adapter, with outer joins condition

    Hi All,
    We are trying to poll tables which contain column types as long and blob, we are using relationships in adapter and kept outer joins. by this we got select distinct t1.document .....etc
    distinct keyword cannot be used for blobs.
    is there any way to poll these tables having blob column types with outer joins.
    thanks a lot in advance,
    RR

    Hi,
    Procedure will be an explicit Invoke not Polling. If you can alter you design such that your BPEL process instead of polling gets triggered by some external entity (Java, PL/SQL, Scheduler, another BPEL etc.), you can put the data fetching logic in the procedure and call this procedure from your BPEL process to get the data. And your BPEL process is called periodically at an interval by an external entity.
    Also see if you can restrict the duplicate records at the database level itself. Polling, AFAIK, is limited in terms of customization and wouldn't be easy to customize. However, would like to learn a way if someone has.
    Regards,
    Neeraj Sehgal

  • Error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

    error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT  nfs sharing

    Never mind, I already found the solution myself.
    What I did wrong was:
    - not copying the master image to the nbi folder
    - selecting the netinstall-restore.dmg image as source to copy to my HD.
    The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
    With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
    In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
    Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
    http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
    This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

  • SOAP to IDOC with or with out BPM

    Hello All,
    I am doing a SOAP to IDOC scenario for which I want to know if I need to create anything in SLD(like products, software components etc). Also can any one brief me on what all steps I need to do in SLD, IR, & ID.
    For this scenario do I need to use BPM or not. And do I need to use 'with party' or 'with out party' to create a business service.
    I need this urgently so can anyone throw some light on this.
    Regards,
    Neelima

    Hi ,
    Posting IDOCS in SAP application system follwing are the steps you have to take.
    Steps (for idoc reciever part)
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2)
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3
    In Transaction SALE
    Define and Assign the logical system name.
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    In SLD – System Landscape Directory
    TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
    Ts for Third Party (Logical system):-
    BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
    BS for Third Party (Logical system):-Enter the XI logical system name.
    For SOAP sender part :
    You have to import ...WSDL as external defintion ...in repository ..
    you have to select appropriate actions for ...request and response.

  • How to use common object from two tables with out join.

    HI,
    I have two tables called A & B In A table i have the following objects
    1.weekend
    2.S1(measure)
    3.S2(measure)
    4.S3(measure)
    5.S4(measure)
    And In B table i have followning columns
    1.week end
    2.p1(measure)
    3.p2(measure)
    4.p3(measure)
    5.p4(measure)
    Now in universe i created all the measure objects i.e.s1,s2,s3,s4,p1,p2,p3,p4 A.weekend,B.weekend.
    instead of using week end two times i wnt to use only once because this is common in both table.
    if i use join between these tables i am getting values fine
    But With out join is there any thing to do in universe level to create common objects to use from both the tables..I tried using aggregate awareness but while reporting it is taking as two SQL.which is not synchronized.
    Please help me on this ...

    hi,
    Although  Weekend column is present in both tables, by creating a single Object in Universe, Universe can identify relationship with only table referenced in Object Creation.
    So, there will be no identification of relationship with other table measures.
    Obviously, you need to create 2 Weekend objects in Universe (in two classes).
    Case 1: You need not join these two tables in Universe. When you create 2 Queries in WEBI, automatcially Weekend objects are synchronized (if both are of same datatype)
    Case 2: If you join these two tables in Universe, Obviously,
    your SQL may contain Weekend from Table1, measures from Table 2
    or
    your SQL may contain Weekend from Table2, measures from Table 1
    Finally, You need to create 2 objects in Universe. But your query may contain a single Object based on Case 2.
    Regards,
    Vamsee

  • How can i get all values from jtable with out selecting?

    i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
    Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
    thanks in advance.
    raja

    You could set the table's data model to be the same:
    output2.setModel( output1.getModel() );

  • How do I delete an old iCloud account with out knowing the password in order to make a new one

    i recently sent my phone to my aunt and she reset the phone but my own iCloud is still on the phone how can she change it with out me giving her my password

    That is Activation Lock.  The only way around it is to log in with your credentials.  Go to Settings/iCloud.  Turn off Find my iPhone, and then uncheck iCloud.  At some point you will have to put in your Apple id credentials (the one you use for app purchases).  Then go to Settings/General/Reset and click on Reset All Settings.  I would suggest you select Erase All Contents and Settings.  That will set the phone back to factory defaults.  She can then set the phone up as hers and download the apps she wants with her own Apple id.
    Have a nice day.

  • Put old I  life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

    I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

    Diane,
    Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
    Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
    So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
    Next download iPhoto:
    https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

  • How do I install mavericks on a macbook with out the app store?

    Okay, so this has been very annoying lately. So, long story short, I had to erase my HDD on my Macbook Pro which erased my operating system, and I do not have an OS X install disk. Is there a way to get OS X Mavericks with out having to go to the app store? I'm running OS X 10.5.8 Darwin on a 2007 iMac. So, I do not have access to the App Store. I am only 16 and I don't have a credit card to spend the 20 dollars on upgrading the OS to 10.6.0 Snow Leopard. Is this possible to get Mavericks so I can put it on a USB and install it, or no? The Macbook Pro is just a regular Mid 2012 13 inch with 4gb RAM, an Intel 2.5 i5 Processor, and a 500gb hard drive. Please help, I do not want to have this amazing notebook hanging around that I can not use. Thanks.

    If this is for a 2012 MBP, the you can do this:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • How do I reset my apple id security question with out a rescue email

    How do I reset my apple id security question with out a rescue email?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (101013)

  • How do I view ipod music files with out using I tunes?

    I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
    How do I view ipod music files with out using I tunes?

    they should be under ur my music folder if u have windows

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • I just got an iphone and I already have an itunes account for my ipod, but I need to sync my phone and I do not want all my music and apps on it, can I change setting on my pc with out hooking up my phone

    I just got an iphone 4s and I need to sync it to my itunes on my pc, but I do not want all the music and apps to be synced to my phone, can I change the settings in itunes with out hooking up my phone?

    Open itunes, connect iphone,select what you want, sync

Maybe you are looking for

  • How do i get a widescreen display on the internet on my mac

    When viewing the internet i cn only view it in a square shape and the image will not fill the screen. I can of course use the arrows to maximise the screen but the actual information will still only be displayed in a central square with ***** edges f

  • No thumbnails for tv episodes

    I have imported a tv series of 6 episodes into iTunes and then onto my iPad and have completed all information in the same fashion as a series I purchased through iTunes. The problem is this - the series cover art shows correctly but when I go into t

  • JPanel problem

    I have two JPanels in an applet window. I have attached a mouse event handler to the second JPanel, such that it repaints itself when clicked, or when the mouse moves within it. Trouble is, the contents of the first JPanel(a bunch of JCheckboxes) get

  • Getting the tables actively used in the schema

    Hello, We are in need of releasing space from the schema we use. Can anyone please suggest how to find the tables that has not been used for a given amount of time. So that we can drop the tables which are not effectively used by the application.. Th

  • How to minimize adobe air android app with as3?

    I have 2 buttons in my app ( my app published by flash cs6 for android ). one button for exit app and one button for minimize app (send app to background and show homepage).what is code for 2nd button in as3? b1.addEventListener(MouseEvent.MOUSE_UP,e