Withholding Tax all Condtion table not appearing in Rebate Credit memo

Hi
I am finding issue in rebate credit memo.
Issue: In Acces sequence I have table 397 and extended 397 with additional fields.
In normel credit memo I am able to find all these table in sales order Pricing Analysis tab.
But in rebate credit memo, I am not able to find all table. Credit memo is showing 397 table but not showing ztable.
Please check below screen shot for details
1. 397 and 988 are identical and its appearing in rebate credit memo.
I created 988 just to verify if any thing wrong in ztable generation or any thing missing to map.
987 is extended table with addtional field sales doc. Type, Item category and its not appearing in Rebate credit memo.
2. Rebate credit memo showing 988 and 397 table
3. Normel credit memo showing all three table
Question : How to get all three table in Rebate Credit memo?
If 988 is appearing than why 987 is not populating.
Both are Ztable and created together.
I tried many combination but extended ztable not coming in rebate credit memo
Regards
Neeraj

Hi JP,
Thanks
Routine 923 created as per SAP note 178824. And I am finding this issue only for rebate credit memo request.
This condtion type (withholding tax ) is not part of rebate condtion. It is part of standard pricing procedure same like MWST.
In Normel credit Memo (CR) all access assigned to this access sequnce is visible in sales order pricing analysis.
But rebate credit memo request (B3) not showing all access (as in above screen shot). It shows only 2 access out of 3 access.
One more addition
If I am maintaining condtion record for visible access in rebate Credt memo request i.e. country / Tax relevant classifcation.
SAP disble it in rebate credit memo request order.
But normel Tax (MWST) is appearing in rebate credim memo request.
I am not sure if this is due to standard sap.
For Thailand we require withholding tax for Rebate credit memo.
Please advice if any one can give some input on this.
Regads
Neeraj

Similar Messages

How to find if Classic Withholding Tax is Active or Not

Hi All,
How to find if Classic Withholding Tax is Active or Not for a company code. It is a U.S. company code.

Hello Kumar,
You can use tcode SE16 and view V_T001_EXT to check if extended withholding tax is active or not, for each company code.
or if you prefer, use SE16 and table T001. Field WT_NEWWT.
If extended is not active, then classic is used.
Regards.

Tax Code and Tax Amount Fields are not appearing

Hi to all,
While making Downpayment Request (F-47) Tax Code and Tax Amount Fields are not appearing in the screen.
for more clarity...
suppose PO is 1150 include all taxes ( Amount 1000+ Tax Amount 150)
as per agreement with vendor we need to raise DR for 1150 and based on DR we will make downpayment to vendor (F-48)
But in F-47 screen Tax Code and Tax Amount fields are not appearing.
Could any body help me on this??
Thanks in Advance
Regards,
Schilukuri

why you are looking for tax code field, pay gross amount as per PO, same amount will update in PO history as well as Vendor account.
Even if you find the tax code field and check the tax code check box, system will not calculate tax at the time of down payment or down payment request.
Please remember that by default standard SAP provides the tax code field in f-47 or F-48.

Error message "Tax code V1 does not appear in any G/L account item"

Hi,
I am getting the error message FF753- Tax code V1 does not appear in any G/L account item when I post a subsequent credit via miro.
It does not give the error with invoice or credit memo for the sames GL accounts.
History:
PO created
Goods receipt
Invoice posted and blocked as value greater than PO
Subsequent credit put on to correct the values in price query - error appears
I know if I go to FS02 and make the GL code * tax relevant it will remove the error but we dont want tax to go to this account as its a main inventory GL code.
Can anyone advise why it would appear on the subsequent credit but not on invoices or credits.
Also is there something I can set up to remove this issue apart from making the GL code tax relevant - it must not need it if the other postings work ok.
Thanks

Doesnt matter that it works for credits and invoices with blank tax you still need to put * in GL code for subsequent credit etc postings

Tax code ZT does not appear in any G/L account item

Hi Gurus
Iam facing a proble while releasing the billing document to accounting. Following error is coming up
'Tax code ZT does not appear in any G/L account item'.
FTXP setting for the tax code appears find as it is tagged to the correct GL account, but somehow the posting is not happeing.
Can you please help me out with this as Iam stuck and the testing has stopped.
Thanks
Ruchi

Hello,
please check the note 400766:
a) Consistency checks
In FI, the system checks whether there is a revenue line for each tax line. In the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the first requirement is not met, the system issues error FF753. In many cases, you can solve the problem with Note 112609
by adjusting the level number in the pricing procedure in such a way that the system copies the tax indicators correctly into the
revenue lines.
If the two tax conditions refer to one revenue condition, the requirement cannot be met if the taxes have different tax indicators. In this case, you must use the tax trigger condition in accordance with note 26646.
Best regards,
Ivano.

Withholding tax type FE is not defined for country MY

When I assign cocd to Fe (Withholding tax type for us-1099 fedral withholding tax) to us and unit 100.
i get an error Withholding tax type FE is not defined for country MY..
pls help

Hello Prajay,
You should first search in SCN before posting your queries. Most of your issues will be resolved.
Anyhow for this., you Need to create a Withholding tax type for the Country wither for Invoice posting or for payment posting.
The same can be maintained at the following path in SPRO.
SPRO-->> Financial Accounting -> Financial Accounting global Settings --> Withholding Tax --> Extended Withholdingtax -> Calculation --> Withholding Tax type.
Here create the Withholding tax type for Invoice posting or Payment Posting.
BR
Amitash

Tax code P0 does not appear in any G/L line item

Hi,
I am using BAPI_ACC_DOCUMENT_POST to upload the AP/AR Journals. I have a scenario wherein for AP document type 'KA' both the line items are of vendor . One line item though has a special G/L indicator and a tax code to it.
When i execute the program I am geting an error that "Tax code P0 does not appear in any G/L line item".
Here in my case I do not have any G/L line items but both are vendor line items and one line item has a special G/L indicator.
Could anyone help me in solving it.
Thanks in advance.

Hi,
Check the long text of the message FF - 753 in SE93.
It describes the cause of this error and the required customising and solution.
Kindly check with your functional consultant for some inputs.
He might be able to help you identify the error.
Regards,
Ankur Parab

Statistical Condition not appearing in Rebate Specific Pricing procedure

Hi,
We had recently implemented Rebate Billing in SAP and for the credit notes I had created a new pricing procedure and marked it as 'Special PP' for rebate at Pricing procedure level.
I am calculating Discount and providing Tax in Rebate Credit Memo.
My India Tax JIVC and JIVP are based on some statistical conditions ZATS and ZSEB, although I am getting the Tax Condition in the document but for the statistical condition, it says "Condition record exists, but has not been set".
Kindly suggest what is that I am missing.
Regards,
Naveen

Pls check the validity of your condition type as per the pricing date of the conditon type. The condition record should be valid on the pricing date of the c.type.
This should solve your problem.
Reward if this helps.

Witholding Tax on Rebate Credit Memo

Hello SD gurus,
Anyone has an idea on how I could deduct witholding tax on my rebate settlement credit memo?
Thanks in advance.
Rose

Hi Rose
I think it should be possible although I have configured Withholding Tax for incoming payments (and it is working the way I want it to in F-28) but not for Rebate Credit Memos.
Configuration of withholding taxes is in the FI Consultant's domain although the SD Consultant needs to do some configuration from his side. Broadly, you need to assign the Withholding Tax Codes and Withholding Tax types in the Withholding Tax Tab of the Customer Master; assign Requirement No: 83 against the Withholding Tax Condition Type in V/08 and maintain Condition Records in VK11. The actual Withholding Tax rate flows from the FI side settings. (more specifically on the Rate you maintain in the 'Define Withholding Tax Code' - Financial Accounting New --> Withholding Tax --> Extended Withholding Tax --> Calcualtion --> Define Withholding Tax Codes).
You may want to ask your FI Consultant to have a close look on the documentation in the Withholding Tax menu under Financial Accounting Global Settings (New).
Regards
Ramana ND

US rebate credit memo without tax

Hi experts,
I have a issue for US rebate settlement. Almost all US states do not allow tax credit, so in our rebate credit memoes, we should not pay tax to the cusomter. Currently, our user remove the tax classification indicator in credit memo request every time to make sure there will be no tax in credit memo. Now user have a request to make default to no tax for all US rebate settlement.
Actually, tax classifiction indicator is the standard SAP solution to control the tax, but our user do not want to do it manually every time. We can remove all tax condition types in our rebate pricing procedure and then there will be no tax at all. However, there is a risk that 1 or 2 states allow tax credit.
Does any one have same experience? Is any other better way to satisfy this requirement?
Thanks in advance,
DL

Apart from the suggestions already given, you can also consider the following.
1) Create a new tax code in FTXP where you dont maintain tax percent against the tax condition type.
2) For tax condition type UTXJ / MWST, have one more combination in V/07 with the document type for debit memo and credit memo
3) Assign the above tax code to this new combination in VK11
4) Now create a debit memo or credit memo and see how it works.
thanks
G. Lakshmipathi

Accounting document not generated for cancled credit memo

Hi,
its related to rebet
den cancled credit memo.but accounting document not generated.
after that created new rebet and accounting document generated..so in document flow status showing open for cancled credti memo. how to delete or clear this? or how to cancle this?
kindly help me on this,
Thanks,
Regards,
Minesh Soneji

Error message:
validation user has got error " Doc.Date<=Post.Date and Postind Date <= Current date"
kindly help me on this..
global docs creaetd.........................................completed
    global invoice created... ...............................completed
         accounting document created.............not cleared
             cancle of credit memo ......................open
                 global docs created........................cleared
                      accounting docs created ........cleared.
i need to remove this status cancle of credit memo , status is open, there should be accounting docs...
kindly help me on this..
this is related to rebet.
thanks,
minesh soneji

Withholding tax @ time of Invoice not available in DMEE struture table

Hello DMEE Experts:
facing some issue in DMEE
I need to capture withholding tax amount @ time of Invoice in DMEE output as far as my knowldge invoice level details doesn’t get copied to DMEE structure table (FPAYHX, FPAYH and FPAYP).
Expected DMEE output:
Indicator
Payment document
BLNR
Gross BLNR amount
Withholding tax amount
Net amount
D
200000006
0010078629
I
200000006
1600000029
1000
8.93
991.07
I
200000006
1600000030
1500
13.39
1486.61
I
200000006
4600006397
650777
650777
I
200000006
4600006398
650777
650777
I
200000006
4600006407
650777
650777
T
1600000029
39
0
0
893
T
1600000030
39
0
0
1339
as per above expected output every invoice applicable for withholding tax @ time of invoice same is get repeated in tax line item (T) i.e next level
I am new to DMEE can anybody help me how to meet this requirement specially how i can arrange level so that all respective invoice get repeated which fall under single payment document.
Some more input
D line items for Vendor Payment line items details
I Invoice level details like BLNRS
T Line stand for tax line item on respective invoice
Thanks
Pankaj

Hello Exper,
can anybody help on this, i need to deliver this DMEE tree ASAP
Thanks
Pankaj

Withholding tax line items are not post

Hi,
I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
and the i am used to post an vendor invoice
given all required feild and press enrer and display the withhoding tax codes screen here also press enter button .... i entered all required field and go to simulation this posting i am getting only 2 line items
like for eg: --- Inventory Debit , Vendor Credit only
here my problem is i am not getting the all with holding tax line items
please hepl
Sree

Dear Sree,
if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
Please check.
Mauri

Error in F-53. Tax code A0 Does not appear in any G/L account item

Hi All,
I am executing Tx FB60(Enter Vendor Invoice). I have not selected any Tax code, but it's appearing automatically. And when I try to save the invoice I get the above mentioned error. How to have this error removed and create a vendor invoice successfully.
Please help.
Thanks in Advance,
Sagar

Hi,
Please assign non taxable tax codes at company code level in transaction OBCL.
Also please check the expense GL that you are using in FB60, whether tax settings are done or not.
Rgds
Murali. N

Withholding taxes at invoice are not totally updated at FMF0

Dear all,
The system consumes the whole amount at budget at the invoice moment but when the payment it is done and updated at funds management by FMF0 that amount is partially consumed.
IF we create an invoice for an amount of 100 u20AC.(it has 10u20AC of withholding taxes) The 100 u20AC goes against a funds reservation doc(linked to an expense commitment item), and withholding tax account (180000) contains a commitment item (retencion) with a
transaction which is not budget relevant (60 and cmmt item category 3).
The figure would be like this
Vendor 90-
Expense 100
Withholding tax 10- [commitment item with transaction 60 ci category 3]
So at funds management the invoice doc(value type 54) consumes 100u20AC (amount type 100)
but when doing the payment
Vendor 90
Bank 90-
and use FMF0 to update payments in funds management the system reduce the invoice document in 90u20AC(amount type 200).
Consequently there is a difference of 10u20AC at invoice document when doing the payment. We would expect to also have 100u20AC of amount type 200. Anyone knows which is the proper procedure so that this 10u20AC gap are not reflected and the 10u20AC are consumed. or what is it what we are missing.
Best regards and thanks for the help

The problem was that we thought the in order withholding taxes wouldn´t be relevant we have to set financial
transaction to 60.I think now the system works as desired, we have set the commitment
item a value of financial transaction 30, commitment item cat. 3 and it is
flagged as stat. commitment item in order withholding taxes are not
budget relevant. I´m not sure yet if this could have other impacts in our business processes.
Hope not
Best regards and thanks for your help

Withholding Tax all Condtion table not appearing in Rebate Credit memo

Similar Messages

Maybe you are looking for