Partial trigger not woring on the Submit button of the application panel.

Hi,
I am facing an issue that I am not sure if it is a framework bug. I used Submit button on the app panel and would like to hide it in some cases. I used a partial trigger for this button. But it doesn't respond to the trigger at all!. I also tried the same trigger on other buttons on the app panel, such as Done, Save, etc.. they all work as expected. Does any one know if this is as designed or a frame work bug?
Thanks,
Chunyang

Hi Frank,
Thanks for the reply. Good news, I just found out this morning after I refreshed my view that the Submit button refresh issue is resolved. Looks like ADF team was working on that bug.
I have another question on the app panel buttons.
My use case for this button is to use this Submit button as a Save and Close drop down, with Save As under it. The object has versions with a version navigation pull down list. When navigate to a Pending version, the buttons are like:
[Save] [Save and Close |\/] [Cancel]
|Save As |
when navigate to a submitted/released version the buttons should be like:
[Save As] [Done]
Could you advise how I can achieve this? Currently I make [Save] [Save and Close |\/] [Cancel] invisible and [Done] to be visible for non-pending versions. I also added an additional |Save As | from actionButtonBar facet to be visible in this case, because the original |Save As | is under [Save and Close |\/] , which is not visible in this case. Not sure if it is the right approach. Now the |Save As | is on the left side of the vertical separator, instead of on the right side, since all the buttons under actionButtonBar facet are on the left side of the vertical separator. So you see the buttons like this:
[Save As] | [Done]
Thanks,
Chunyang

Similar Messages

The report I published on the SQL server report server is not showing in the application we use to retrieve reports.

The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.

Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Crystal Report: irregular error not handled by the application component

Hi all,
The error message u201Cirregular error not handled by the application componentu201D comes up when I run any of the Crystal Report in the SAP Business One.
But this error happens only in the client Machines, from the Server I can run the report normally.
Thanks and Regards,
Alberto Franç

Hi,
It seems installation and registration problem, have you tried to other client computers? Try to reinstall the Crystal Report in client.
Regards,
Clint

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me out

Hi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

Xtreme Gamer is "not Supported by the Application" Problem. He

My SoundBlaster XFi Xtreme Gamer has suddenly stopping being detected by my creative software, such as Volume Panel. The drivers are installed, and when I hover my mouse pointer over the volume panel is still shows "SB X-Fi Audo [E000]" which is the sound card, but when I doubled click to open the volume panel it says that "The current selected audio device is not supported by the application. Do you want to select another audio device now?". When I click "Yes", it doesn't show anything on list besides "Windows Default Audio". This happened out of no wheres, with no changes at all to my computer. Volume Panel was working yesterday, but when I woke up today it wasn't. I have no idea what could be causing this, or what caused it... I did update the drivers about a week ago, but it was all working fine since, until today.
I haven't installed or uninstalled anything since it was working properly.
I tried reinstalling drivers and software, and it did not fix anything. I also uninstalled everything including drivers from computer, and used my original installation CD to install everything over again. Every installed fine, but then for some reason it would not install the drivers. Windows was detecting the device, but when I went to install the hardware manually, it would ask for CD to find some files to install... it said this twice, I located the files it needed, and each time it would complete the process it would instantly reboot computer without notice. When the computer was booted up, it would ask then ask again for the Creative CD to install the detected hardware. So I for awhile I could not install the drivers, but for some reason out of no wheres it finally installed when I used the update installation file I downloaded from Creative.com, even though I had tried the same thing a few times, it for some reason installed drivers. But now it is all installed again, my software seems imcomplete and will still not work with the sound device. What seems to be the problem here? Only thing I can think of now is the installation for some reason became corrupted. Only way I can think of fixing it is reformatting my whole computer, but as of right now I don't feel like spending a whole day doing so.
Is there anything that you can think of to fix this problem? I have had the sound card for about a year now. As of right now, I am still using headphones in the soundcard, but it doesn't sound good at all as I can't change anything in software. I also noticed that is no longer has as much installed as it would if I used my original CD. It doesn't have an option to switch sound modes anymore. It also doesn't now have "X-Fi Soundblaster" in "Add/Remove Programs" list. All it has in Add/Remove is "Creative Audo Console".
I uninstalled everything I could and deleted left over files in the Creative directory, so I deleted the whole folder after.
Only other thing I can think of is something in the registery is messed up, and causing the sound card not to be recognized. I also have WinXP SP2.

I spent yet another hour or two trying to fix it, and nothing changed.
I put it into a different PCI slot, and made no difference.
PCI slot doesn't seem to be the problem, I am thinking it is something within the registry itself.
I also put in the CD and there was no option to remove drivers, so I just went ahead and tried overwriting them, but that actually made things worse. My computer kept rebooting over and over when it hit the Windows Boot Up logo, and had to go into safe mode and do a system restore to get it back to normal.
It also keeps asking for the CD when windows loads and it detects the soundcard.
It will ask to locate acouple files, I do what it it says, but just as it is finishing installing the drivers it reboots the system.... when windows is loaded again, it will ask the same thing over, and will keep giving same results.
There isn't anything to completely remove all the creative files and folders including the 00's of registry keys. Maybe Driver Sweeper or Driver Cleaner Pro might help? ill try them, but as of now im not bothering with the soundcard.... ill just reformat. I just hope it ain't the card itself, because I am a month over the one year warranty, and the azzholes from creative said there was nothing they can do about it.
That alone made me want to turn to a different brand next time with better support. Creative has some of the worst support I know of.
They tend to leave people hanging with their defecti've hardware. What I don't get is, that the card still installs the drivers at times, and it will still work but the software won't.
I have been using it this whole time, but seems to freeze up my Guildwars alot.
It still sounds good, way better than Onboard, just not as good as before because there were no options for change mode, or couldn't access the equalizer.
Anyone know of any programs that will completely remove everything for the Xtreme Gamer Creative Software? Including everything in registry.
Also, is it possible that there might be a Windows Service that might have an effect on the problem? I tried enabling a few things, then try rebootin and reinstalling, but didn't seem to help.
But then again, I am not sure which services would cause the problem.
Definately something happened with the last Creative Driver update, only took a week afterwards for something to go wrong.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

ImageReady CS2 error: Could not fully open the application. Personalization information is invalid.

Hello,
I am posting because Adobe is not offering tech support for CS2 and I cannot find this error for CS2 software, only CS.
I have been using CS2 for some time on the same machine (specs below, let me know if you need additional), and have had no problems. All of a sudden, I am getting the error: "Could not fully open the application. Personalization information is invalid." when opening ImageReady. Either jumping from Photoshop or opening from Applications.
I cannot reinstall, as I lost discs in a move, but it is valid software with valid serials, and registered, but no phone tech support! I would appreciate any help/advice/solutions greatly! Thanks.
Photoshop/ImageReady 9.0.2
Mac OSX 10.4.11
1.47 GHz PowerPC G4
1.25 GB SDRAM
Available Disc space: 24.91 GB
GeForce FX 5200

Neil and Ann,
I tried calling customer service today looking for a tech support number and was told that tech support is no longer offered for CS2! She told me to go to the forums at Adobe.com, which is how I ended up here.
My discs were lost in a move away from a roommate (along with some other things!), so there is no recovering them. I'll call it the cost of my sanity.
I have an old version of Director, but it gets so involved. It would have been so easy to flip my simple graphics straight from Photoshop to ImageReady. Looks like I will have to though.
Thanks for the time and attention to my problem. I guess I should be thankful that I only lost ImageReady, which I use once in a blue moon anyway.
Best regards.

An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Get this error when trying to install Logic patch 9.1.4 to my machine.
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Thx, but i had already read that and tried it: did not work.
Got it fixed now by reinstalling Logic Studio 9 from DVD.
That indeed creates the Logic Pro folder in Applications - something I had tried earlier by simply moving my existing Logic folder. This means the Logic 9.1.5 update does not simply check a folder name: there must be another entry/registry entry it checks. Reinstalling Logic Studio from scratch solved it for me.
After reinstalling thought Lion forgot my Focusrite Saffire 40, so no DAW. Solved that by reading a forum entry on beta drivers.
So I am happy, music creation wise.
Left for me is to solve the X Mail application saying it does not run under Lion!
Model Name:          Mac mini
Model Identifier:          Macmini3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.26 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?

Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm.

Illustrator CS6 is not listed in the Programs panel.

Hi, my Illustrator CS6 is not listed in the Programs panel in the Extensions Manager. How do I restore it?
A bit of history:
I had been using ScriptBay with Illustrator CS6 before, without problems. After my someone came and resolve some of my computer's network permissions issues, I discovered that ScriptBay panel has stopped working normally.
However, the script still works fine in Indesign CS6
I tried deleting some preferences, but scriptBay refused to work in Illustrator. Then, I copied a colleague's Illustrator CS6 to test on my machine (without deleting my copy). And now, my extension manager does not list Illustrator ib the panels.
Can anyone help with these 2 issues? I wanted the ScriptBay to work so badly!!
Thanks!
Elle

Thanks for your sugegstion. Gonna repost this in another forum. I have found the solution to the "missing program": https://forums.adobe.com/message/4622944
I can't do a clean install; it's not my personal computer. Hopefully I'll get a solution in the AI community!
Thanks!

CS3 action script 2.0: compiled clip components do not appear in the component panel

Hi,
I have a FLA file containing 3 compiled clip components.
I use a MXP file to copy this file to the components panel,
this works fine when using Macromedia Flash 8 or Macromedia MX
2004, but when using CS# the components do not appear in the
components panel, only if a use regular component or SWC component
it appears in the panel, any reason why?any ideas?
Thanks
Maya

I can use this code from html. I'm able to say where the swf
and xml file are. I just don't know how to do this using action
script.
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
width="768" height="576" id="tech" align="middle">
<param name="movie"
value="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
/>
<param name="quality" value="high" />
<embed
src="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
quality="high" width="768" height="576" name="tech" align="middle"
allowScriptAccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>.

I want to install PSE 13, but want to uninstall PSE 12 first. It is not listed in the control panel. I have windows 7. How do I uninstall it?

How do I uninstall PSE 12? It is not listed in the control panel. I have windows 7. I want to install PSE 13.

Does the iPod show in My Computer? If so then go to My Computer>iPod>DCMI Folder and copy them from there to where you want them

The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.

Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

If you had never saved the file at any time, you have lost your work.
Go to; Apple Menu > Force Quit
Start a new presentation, and from now on, after adding the first object to the slide, save the file.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

Partial trigger not woring on the Submit button of the application panel.

Similar Messages

Maybe you are looking for