Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software. I can no longer produce a PDF within the software and this is inpeding my work flow.
Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software. I can no longer produce a PDF within the software and this is inpeding my work flow.
Hi elizabethc8523575,
Elizabeth Christodoulou wrote:
Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software. I can no longer produce a PDF within the software and this is inpeding my work flow.
Please elaborate your issue. What kind of interference have you observed?
Regards,
Rahul
Similar Messages
-
I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?
Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis. -
Can I publish a PDF to the web and have others access it and use weblinks within the document?
Is it possible to publish a PDF to the web and have the viewers be able to click on links within the document. I'm asking because I found a PDF file WebQest online and it allowed me to click on the links. How did they do that?
What is your operating system?
Can you open that PDF with a text editor and check that the first four characters are '%PDF'. -
how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.
Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps! -
I have an iMac, an iPhone, and a MacBook Pro. My full iTunes library is on the iMac and iPhone, but only a handful of songs are on my MacBook. They are all associated with the same Apple ID. When I try to sync, I get a warning message stating that I will lose songs on my phone which aren't on the laptop. How transfer my music from my phone to the laptop?
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.
Is this itunes on the iPad or on my computer? Thank you for the reply.
-
I am from Brazil, and i have an iphone 5. Since it was purchased the 3G/4G data signal doesn't work. I made contact with people in Apple from Brazil and they told me I had to ask for your support to unlock the 3G/4G data signal. How do I have to proceed to unlock this feature in my iphone?
I would appreciate if you can help me.
Thanks!Greetings alex.bonifacio! I'm very sorry that you're having connection problems with your iPhone 5. While would love to help in any way I can, the device must at least be on an active line of service with Verizon Wireless in order for me to be able to make any changes. I must therefore urge you to contact your local wireless carrier for your equipment options. Good luck and thanks!
DionM_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.
Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.
-
Ipod touch 4 i can no longer watch movies, transferred to the ipod, on videos app it simply says loading and then stops. On my ipad mini with older ios it still works. So how can I fix this I have tried converting videos into different formats but it will not work.
Is IOS 8 really appropriate with Ipod Touch 4, if the older Ipods do not have the capability then why are we prompted to install new operating systems.
Thanks.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all videos and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again
On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated. -
My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?
a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac. -
I have Adobe Acrobat version 11.0.0 installed with Adobe CC. I cannot download PDFs from the internet (in this case from PubMed National Library of Medicine). If I try to do this I get a popup message saying that "ADOBE ACROBAT NPAPI PLUG-IN, VERSION 11.0.0 NEEDS YOUR PERMISSION TO RUN. I DON'T KNOW HOW TO GIVE THIS PERMISSION OR WHAT TO DO. CAN YOU PLEASE HELP?
What buttons do you get to click on with this message? What browser are you using (e.g. Safari, Chrome, Internet Explorer...)
-
I have an Iphone 3G with the software 4.2.1 but i need to update the software to 4.1 to download a particular app before i go away tomorrow but i cant update the software till the 13/10/12 which is annoying just wondering if there was an options available for me to push the update to now so i can use this app before i go away
i have an iphone 3 too and i don't want to spend again money for a new iphone , and i had that problem too , i don't got any app's on my iphone , but i whould realy helpfull if apple could make another update in order to work the apps ...
-
Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?
yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(
-
I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your tutorials make it look so simple. How can you advertise this as a viable tool when it just doesn't work?
It is all over the place and all of your tutorials make it look so simple.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
How can you advertise this as a viable tool when it just doesn't work?
Concluding something does not work because you fail at using it is not necessarily always justified.
The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.
Maybe you are looking for
-
Match case in search and replace string
Hi ! Attached, my problem. I am searching "toto" in input string "toto+tototi" and replace "toto" by "A0". I want to "match case" the search input in order to get a string result : A0+tototi Does it exist options allowing to match case ? BR, Vincent
-
New to mac, problem in iphoto
hi, i copied my photos from an external hard drive, and now every time i open the Iphoto a messege comes that says: a photo has been found in the iphoto library that was not imported would you like to import it? when i press yes, a recovery folder wi
-
i reset my ipod touch and the sreen now appear black with the USB cod facing up to the itune logo. its not displaying the main screen but it connect to the itune but it doesnt display the sumery in the main itune wondow..Please help
-
(104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization
Hello Guru's I am getting the followong error when trying to open the BI reports. The initial exception that caused the request to fail was: User has no RFC authorization for function group SDIFRUNTIME. com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_S
-
Perspective chart in Jdeveloper 3.1
Hi, I hope someone can help me to fix a problem. I tried to use a perspective chart control in Jdeveloper 3.1 in one of my application. I used this chart control in an application to display a graph. But when I run this applicaiton in JDeveloper, it