Witholding tax report in more than one currency

Hi there
Can you please kindly advice us on how to run the witholding tax report in both system and local curreny?
In addition please also advice on how we can redefine the report so also to include manual JE in case of manual adjustments in the WHT account.
Many thanks
Oren

Hi Oren,
I'm not working your Localization and my localization doesn't have the Tax Report.
i think, your Tax Report PLD Fields are HardCoded in PLD.
If you need List of Variables for this report. Try this,
Variables may change between versions & even patches & it is not recommended to use them in pld templates.
Please see SAP Note 860774 - What is a variable in SAP Business One?
Check the Link,
The list of variables are in the service.sap.com/smb/sbo/pld
You can download the List of System Varaibles from this link
https://websmp110.sap-ag.de/~sapidb/011000358700000491342007E.zip
Regards,
Madhan.

Similar Messages

Reporting from more than one infocube and also from multiple ODS

Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
Sekhar

Hi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

How to input more than one currency field into the transfer rules?

hi experts,
how to input more than one currency as well as unit fields in transfer rules, when i am giving two currency fields in flatfile the same structure could not able to get in transfer rules ( 0currency).
pl give me the procedure to input more than one currency field.
thanks & regards
venkat

Hi Venkat,
For example - for amount kf - if you have 0currency as ref object and included in transfer rules and for other kf - create a Zcurr object and try to include...hope it works.
Thanks,Ramoji.

Updating JournalEntries object with more than one currency fails

I'm using SBO 6.50 (exactly CEE version 7.60.014 SP:01 EF:08).
   I'm trying to update memo field of existing journal entries. Most of them works OK, but if I try to update entry with more than one currency, update fails with an error code -5002 and message:
   Transaction includes more than one currency [OCRN].
Code (in C++) is quite simple:
SAPbobsCOM::ICompanyPtr m_company = SAPbobsCOM::ICompanyPtr("SAPbobsCOM.Company");
SAPbobsCOM::IJournalEntriesPtr pEntry = m_company->GetBusinessObject(SAPbobsCOM::oJournalEntries);
long m_nId = 1;     // TransId field, any valid value
try
     if (pEntry->GetByKey(m_nId) != -1)
          return;
     pEntry->Memo = _bstr_t("Memo");;
     if (pEntry->Update() < S_OK)
          throw(0);
catch(...)
     long lError; BSTR bstrError;
     m_company->GetLastError(&lError, &bstrError);
What's wrong? Using multiple currencies in journal entry is correct, it is possible to add them manually so it should be possible to update such an "safe" field as Memo is.

Hi,
I have the same problem, but if you go to Administration->System Initialization ->Document Settings, select "Per Document", and in Document, choose "Journal Entry", by default, the options are clicked, or "Blocked", this is why in DI yoy get this message.
Try to unchecked and it will work.
HTH,
Ribeiro Santos

One position reporting to more than one position in other org unit

Hi Experts,
How to map in SAP if One position is reporting to more than one position in other org unit. plz explain me the in detail.
Regards,
Saumya Chawan.

Hi Saumya,
First you have to decide on the relationships you want for this position. The question is - who will decide pay increases for this position?...who will approve vacation time? That manager is the one who is the directly managing the position and so the position must be in the org structure for that manager's org unit.
Second, what is the relationship to the other manager? This is usually a "dotted-line" or functional reporting relationship to another position. You can use a standard relationship such as 005 or create your own.
Then you can use the Matrix to create the two relationships. Easy Access: Human Resources --> Organizational Managment --> Organizational Plan --> Matrix (transaction PPME). Use the "Standard selection" and create the two relationships between the position and the org unit and other position (or other object depending on your requirement).
Paul

Building report from more than one data model

Hi Experts,
I have a requirement to build a report in BI Publisher.
The report has three section each having their own data source.
When i try to create report in BI Publisher it allows me to associate one data model per report.
is it feasible to have more than one data source for a single report.
Cheers,
Andy

Hi Andy,
Not sure If this meets your requirement, please do have a look at the following links:
http://www.rittmanmead.com/2008/04/24/bi-publisher-reports-with-multiple-data-sources/
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_i.html
http://blogs.oracle.com/xmlpublisher/2008/07/multiple_datasources_ii.html
Thanks.

Carls Auto Updating Report - Updating more than one Report on a page.

Does any one know how or adapted Carl's Auto Updating Report to work with more than one report on a page.
If I simply add another html_PPR_Report_Page with the second report_id I get an Error : "gNode is null or not an object". using IE.
function mon_Refresh()
setTimeout("mon_Refresh()",5000);
html_PPR_Report_Page (null,'R1736701112358007',$x('r_R1736701112358007').getAttribute('htmldb:href'))
works fine but when I add the second call I get the "gNode is null or not an object". error.
function mon_Refresh()
setTimeout("mon_Refresh()",5000);
html_PPR_Report_Page (null,'R1736701112358007',$x('r_R1736701112358007').getAttribute('htmldb:href'))
html_PPR_Report_Page (null,'R1738006943370690',$x('r_R1738006943370690').getAttribute('htmldb:href'))
Any help most appreciated.
Anthony

Hello,
Looks like you might be running into our AJAX race condition take a look at this fix and see if it helps you out.
Race condition in htmldb_get.js
Carl

Currency Translation for Key Figures with Value More Than One Currency

Hi...
I have query which display key figure GL Account Balance. The currency that used for this key figure is USD and IDR. How we want display value based on selection screen? So if we input currency USD, all value that use currency IDR translated to USD and all value that use currency USD not changed. Otherwise if we input IDR, all value that use currency USD translated to IDR and all value that use currency IDR not changed.
How we do this in query designer? Thank you.
I have use currency translation :
1. (Right Click Key Figures >> Properties >> Currency Conversion Key)
2. Target Currency Using Variables Entry
but seems the result is not correct. Can anyone help me ?
Regards,
Satria

Hi all,
Thanks for your help, but still I have problem. I have create one currency conversion type, ZXXX. This currency conversion type is using exchange rate type = "M",source curr from Data Rec, sel of targ currency with translation,
and fixed time ref = "Current Date".
Problem:
1. With this setting, i create currency translation in BEx, but the result is not same, it's like the exchange rate not using the same setting with data in ECC (I compare data with transaction fs10N). Is my setting for exchange rate not correct?
2. When I try to display GL Account Balance --> Calculated Key Figure (Total Debet - Total Credit) for period 0, the translation not working. Example if the value is IDR 1234 then the value in USD still USD 1234. Why this happen?
Thank you
Regards,
Satria

Transaction in a BP in more than one currencies

Hello Experts,
I have made few transaction with BP > Vendor in one currency, now I have a requirement of making a trancsaction in Swiss Frank another currency.
Can we change the crrency ?
Help Required,
Regards,

Hi Riaz,
SAP Business One allows Multi currency option. This setting has to be done in the initial setup of Business One. Go to Administration > System Initialization > Company Details and in Default Account currecy slect the option Multi Currency.
Now in Administration > Setup > Financial > Currencies > Define the swiss frank currency.Then in Business Partner Master Data in the currency Option choose Multi Currency.
Now when you make an transaction and choose the BP in which Multi currency option is enabled choose BP currency below the customer ref no.
Hope this would solve your problem.
Thanks and Regards,
Kawish Junaid Mazhari

How to show more than one Currency Symbol on Query

Hi Guru's,
I've to bring multiple currencies on one single report and the report should look like this:
Sales Figure:-
Region SalesQty Revenue     Currency
EAST    10        $ 1,000.00 USD
EAST    7        20.00 (but with Euro sign) EUR
EAST    2         500.00 (with Rs. Sign) INR
Total   19       No total required for diff currencies.
Please throw some idea how to do this in one report.
Reddy

Hi All,
The issue is to have Currency Sign pop-up with related currencies.
Yeah you are right the currency key will decide which currency to push in BI (from ECC) and it depends on source system to send the right document currency for that particular record.
The reaosn not going to multiple columns is to avoid data redundency as we do not know how many currencies could come. And the result, report will end up having extra columns to hold these Multiple values (USD,EUR,INR etc)
Have you seen a report where you have Currency Sign other than Dollers ($).
Thanks for looking into it.
Reddy

How to generate a report with more than one elements in the same graph??

I need to generate a custom report in OEM GC 10g featuring volume total capacity information and volume free capacity information both in the same graph on (Y-axis) and time on the (X-axis). I could generate only the total volume capacity graph individually, but how can the combined graph and the graph for free capacity be generated...

Is it your values in parameter NO separated by coma? And is it
parameter in where clause?
Do you want something like :
from table
where s_no in (NO) ?
If is answer "yes" you can create lexical parameter in report.
You can write in report sowething like:
select a.field1, a.field2,.....
from table a
&COND /* this is if is condition only one line after "from".
if you have more lien after where then you will put this &COND
in line where you want to have your multivalue.
Then in your trigger in form you should write:
sc_no := 'where a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
/* again this is if you have only one line with WHERE ili
conditions */
or you will write:
sc_no := 'and a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
It will substitute line in which is your conditions with
multivalue.

PS2013 / SQL 2012 - A SQL Reporting Services Report with more than one filter connection looses connection in a site template

Hi,
I created in a sub site not linked to a project to become a site template. I inserted two SQL Reporting Services reports web part that require the same two dates for an interval and the name of the project in a page of the site and connected
to three filters, two for date and one for text and I got the page below (only one of the reports shown).
Look that all parameters needed by the report are linked to the filters above the report.
Then I save the site as template with all contentes and assign it to the EPTs and create a new project or replace the site of existing project site. What I got is:
Look that the filter connection of the dates are lost (in both reports) and the order of the filters changed.
I deleted and retried to connect the filters in diferent order and language, but I did not get any success.
The BI Central Data Connectivity resource is activated in the template site and in the site collection.
Is there any solution for this?
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi,
Correction: this happens only with "Date Filter" web part!
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Running a BEx report with more than one query in Background

I am having a workbook with 2 queries .This workbook needs to be executed at a particular time every day and then save this file to a application server location .
The file name has to dynamic, as everday a new file has to be created with some date stamp.
Please let me know the steps/ ideas to achieve this

Sudhakar,
are you sure that it has to b a workbook ? running queries independently can be done .. am not sure if a workbook can be scheduled to run...
One alternative is to use APD - have the queries run and populate two ODS and then have these ODS in a multiprovider and have one query output for the same - seems to be a very longworkaround...
Another option is to have the queries executed in an ABAP programme and then have the results in an internal table and push both the result sets into an excel sheet ad save it in the application server.
For reading queries in ABAP there is a functionmodule for the same .. something like RSDRI_INFOPROV_READ .. I am not too sure of the name but there is a function module for sure..
Hope it helps..
Arun
Assign points if it helps..

Witholding tax report in more than one currency

Similar Messages

Maybe you are looking for