Wizard and Report - Change Width.
Application Express 4.0.2.00.07
Hi All,
How do I change the width of a wizard Region and a Interactive Report Region.
Messages Page - WIZARD REGION
Message List - WIZARD REGION
Interactrive Report - REPORT
Message 1
Message 2
Message 10
Thanks
Zac
Hi,
I believe a lot of Smartforms are already working fine in your PROD server.....Have u done some customization also for the Smartform in the Txn like NACE?..if yes..then whether u moved all those changes also in the PROD......
See the Transport Log once again in the PROD.
Howz is the SMARTFORM behaving in QUALITY?
Similar Messages
-
Need to colour sections of 1 stroke differently and also change width.... need help please!!
So i have this piece and i need to be able to colour different sections of the stroke around the whole piece with different colours. Also, i need to be able to change the width uniformly on sections between anchor points. I DO NOT want to use live paint as it takes away the sections of stroke i have tapered off already, however, the effect you get when using the live paint selection tool is exactly what i need
Is there a way of doing this at all?? It seems that i should be able to do it but i'm not able to find the right button, option or combination of both.......
Help me adobe wan kenobi, you're my only hope!!!!There are many ways, hard to choose the best without seeing your artwork, this should cover most situations
Make a white stroke, over whatever colors you need.
Use Variable Width Tool to distort
Select both items and transparency palette >> make opacity mask -
Skinning table. Change width of the table.
I want to change width of all table so that sub-control-bar gets affected too. I've learned that there's no way to define it that way:
af|table {
width:60%;
and if I write:
af|table::content {
width:60%;
and then change width of sub-control-bar component to the same amount it doesn't look the same...Hello,
I have a similarly problem. I use an addRemoveList in my page and I want to set the width of the two lists to static value (like width=300px and not width=auto). Can you tell me if this is possible in Java Studio Creator 2?
Thank you! -
Error while using the 'Form and Report' wizard
Hello,
I’m trying to create a form and report on EMP, using the APEX wizards, but I’m getting the following error message:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030100.WWV_FLOW_SHORTCUT_IDX1) violated
This is something local, on my APEX instance only, but any ideas what is wrong here?
Thanks,
Arie.Hi Scott,
>> Do you happen to know where that PL/SQL shortcut came from? Created by you or an apex wizard?
The original shortcut was probably created by an APEX wizard, but then I changed its type to ‘PL/SQL Function Body’. The shortcuts are not included in the translatable components, so I need a function to determine the application language, and issue the message accordingly.
>> The type of the shortcut is not part of that constraint
So changing the shortcut type back to the type I need, after the wizard finished its job, should not have any side effects. Correct?
>> and the sequence always seems to be 1
And we don’t have access to it, so we can’t change it manually.
>> Our bug
Can you please fill a bug report on that?
I will post an enhancement request about including shortcuts in the translatable components, but I’ll appreciate you mention this issue also.
Appreciate your time and efforts,
Arie. -
In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum descHi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan -
In Reports what is the difference between the AT NEW and ON CHANGE Event
Hi,
Could you tell the differences of AT NEW and ON CHANGE events in ReporsHi raghava,
The Major Difference is :
a) When AT NEW occurs,
the alpha-numeric fields have ******* in their value,
b) where as in case of ON CHANGE,
the alpha-numeric fields have their corresponding value,
of that particular record,
where the Event gets fired.
Other differences are :
ON CHANGE OF can be used any where in the program..
on change of differs from at new in the following respects:
1.It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
2.A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
3.When used within a loop, a change in a field to the left of the control level does not trigger a control break.
4.When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
5.You can use else between on change of and endon.
6.You can use it with loop at it where . . ..
7.You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
8.Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
while
AT NEW can be used only within a loop of an INTERNAL TABLE..
5. Sample program to get the taste of it
(just copy paste)
6.
REPORT ABC.
DATA : BEGIN OF ITAB OCCURS 0,
bukrs like t001-bukrs,
f1(10) type c,
end of itab.
itab-bukrs = '1000'.
itab-f1 = '1111111'.
append itab.
itab-bukrs = '1100'.
itab-f1 = '3333333'.
append itab.
itab-bukrs = '1200'.
itab-f1 = '555555'.
append itab.
AT NEW
loop at itab.
at new bukrs.
write :/ itab-bukrs , itab-f1.
endat.
endloop.
AT ONCHANGE
loop at itab.
ON CHANGE OF ITAB-BUKRS.
write :/ itab-bukrs , itab-f1.
ENDON.
endloop. -
Item(select list) with LOV and Report with link = changed value item
Hello,
On one page I have:
- Item 'P_name' (select list) with LOV to select name of a person;
- Items 'factory' and Report 'factory'(standard created with 'Form with Report' on the same page).
Situation:
All works fine. I selected first a LOV Item 'P_name' (say 'Jane'). But....
Only when I select a record (to change the values) from the report 'factory' then LOV Item 'P_name' become empty. Report used a link to the same page to fill the report items 'factory' and make also the LOV item empty.
Question:
I have made a process that write the name 'Jane' to table.
I see two possibilities:
- LOV Item value => fill the LOV item with 'Jane' from the table before region. Is this possible?
- Report => What is the buttonname of reportlink? I can use this name in the processes.
Thanks Walter!1) what i meant was for you to test this ridiculously huge LOV outside of htmldb, but it occurred to me last night that you could, in fact, be hitting a limit of ours. after some poking around, i have confirmed that. select list items in htmldb are currently limited to 10,000 rows. this was initially done for performance reasons, but they're now opening up the restriction. if you really need to work with that many rows where the user is allowed to pick from a set of values, consider using a popup item type instead. it'd help your app performance as well (in my test cases, it stank to have to wait for my 10k select list rows to come down to my browser).
2) sorry to not have been more clear about this, but when you set your item's "Source Type" back to "Database Column", you'd have to specify that column in the "Source or value expression" field. also, you can't put a sql query into that "Post Calculation Computation" field. as i said before, "you can take a look at the attribute-level help for that field to see implementation examples."
3) stick with "Always..." for now if you're using our auto-dml process(es)
regards,
raj -
What are the reporting changes in BI 7.0 and sap 3.5
Hi,
what are the reporting changes in BI 7.0 and sap 3.5.
can anybody know the other name of BI 7.0.
what are the min,max no of load times.
what is the load timings if the onsite office is at USA.
Thanks & Regards,
cheta.Hi Cheta,
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
check these link's
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
Refer these links
There is lot of Info Reg BI7.0 including Reporting also.
Regards
Karthik -
Changing language in forms and reports
Is there any tool Available in oracle 9i forms and reports to change the language
(suppose need a change from english to arabic)?This is not the correct forum form from related queries. Please raise your question in appropriate forum.
--Mukul -
How to change the Forms and Reports's NLS_LANG character set on OAS
Hi,
I'm having problems with the OAS10g's actual character set, when displaying a report made with Reports Builder 10g who has the letter "ñ" it displays "ñ " with a blank space at the final so i need to change this character set for one that suits this requirement.
which file or files should i change ??
could this change affect something else, for example another product in my OAS ??
Regards
CarlosI have this Forms and Reports Application in Brazilian Potuguese. What I do at new installations is:
1. Open this file: <MiddlewareOracleHome>/forms/server/default.env and add the NLS parameters below the FORMS_PATH definition:
FORMS_PATH=D:\Oracle\home207middle\forms;D:\MYENV\Exe;D:\MYENV\Imagens
NLS_LANG=BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252
NLS_NUMERIC_CHARACTERS=,.2. Open this file: <MiddlewareOracleHome>/reports/conf/<your_report_server_name>.conf and create an "environment" section with the NLS variables:
<environment id="MYENV">
<envVariable name="REPORTS_PATH" value="D:\MYENV\Exe;D:\MYENV\Imagens"/>
<envVariable name="NLS_LANG" value="BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252"/>
<envVariable name="NLS_DATE_FORMAT" value="DD/MM/YYYY"/>
<envVariable name="NLS_NUMERIC_CHARACTERS" value=",."/>
</environment>For this one to work, the application must set RP2RROREPORTSENV=MYENV before launching the report. -
On transaction FBL3N report change layout and save layout icons not activ
Hi,
I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N report change layout and save layout icons not active; only select layout icon is active.
Please advise how these two icons can be activated.
saeedHi,
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70.
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: You can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
I guess that your user-id have set activity 03 for this object.
The SAP notes 374656 and 409190 are recommended.
So, if the values 01 and 02 are not included, then
the user can't change and save layouts.
For the line item display in FI the authorization
object FI_IT_ALV has been created as an extra security check in addi-
tion to the ALV authorization object S_ALV_LAYO.
Please check note 374656 where you should be able to find
relevant info about this. Also note 637554 should be helpful.
Regards,
Aidan -
Hi,
"Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
on TechNet.
I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
I have SQL Server 2012 STD and Report Builder 3.0 and want to train non-technical users to create reports as per their need without asking to IT department.
Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
So how they can configure parameters based on Other data sets?
Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
a set of defined reports?
I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know.
Many thanks and Kind Regards,
For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Change width of splitter container and single container
Hi,
im using a splitter container (abap oo style without dnpro elements) with 2 single containers.
create object go_splitter
exporting
parent = go_docking
rows = 1
columns = 2
Column 1 leftside = Tree (width = 100)
Column 2 rightside = ALV (width = 100)
Ratio = 50:50
Is it possible to change width to ratio 30:70
Example:
Column 1 leftside = Tree (width = 30)
Column 2 rightside = ALV (width = 170)
Ratio: 30:70
Thanks,
Gordon
Edited by: Gordon Breuer on Feb 19, 2009 10:56 AM
Edited by: Gordon Breuer on Feb 19, 2009 11:04 AMUse Method SET_COLUMN_WIDTH & SET_ROW_HEIGHT of Class CL_GUI_SPLITTER_CONTAINER to adjust Width & Height
CALL METHOD W_L_SPLITTER->SET_ROW_MODE
EXPORTING
MODE = W_L_SPLITTER->MODE_ABSOLUTE.
CALL METHOD W_L_SPLITTER->SET_ROW_HEIGHT
EXPORTING
ID = 1
HEIGHT = 80. -
Interactive Report Column Width adjustable?
I am using the interactive reports in 3.1.2 and love them. That said, I have a question/problem. I have a column in my report that is essentially comments. It often contains hundreds of bytes of text per row of data. When I use the interactive report I find no where that I can define a default column width or number of report rows to display. So, when I run the report, the column with the comments defaults to a column width of about 25 characters and this causes it to display many html rows for this report row and makes the report very ugly.
Does anyone know if there is a way to redefine a column in an interactive report to prevent this?Scott,
Using FOP.
Standard reports PDF can resize columns.
Interactive report does not. Additionally, the page size does not work the same as the regular reports. Moving between landscape and portrait changes the size of the height and width.
I assume there are several problems.
1. The report does not resize horizontally. I will have to create a second report to see if I can duplicate the issue.
2. The Print page of the report region does not have the same fields as the regular reports. I am not sure why or how to overcome the lack of being able to resize columns, etc.
3. The functionality on the page does not seem to all work. At least not the same way as the regular reports. Changing paper size and orientation are two examples I have verified.
4. Can't select a template. How can a different XSL-FO template be used?
I am going to try and push it to Word.
Sam
Edited by: slavanaway on Mar 26, 2009 1:13 PM -
Report Layout width(Report based on SQL Query)
Is there any way to increase the width of the report layout? I have removed as many columns as I can and dropped the font size down but the data in the columns is still wrapping to more than one line. How can I increase the report layout width, or change the layout to landscape or something similar.
thanksI had this problem with wrapping text. You have to create a Reports From SQL Query and choose a custom layout. Then when you go the the HTML layout section, you will need to ad nowrap to the <TD> tag (i.e. <TD nowrap>) for each field you do not want to wrap.
Martin
Maybe you are looking for
-
I get this message when I try to start Firefox after first logging on after turning on the computer. Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. H
-
I backed up and sync'd my phone and lost my contacts on the phone, how do I get the contacts back onto the phone?
-
How can I erase burnfolders in the side-bar?
How can I erase burnfolders in the side-bar? W.W.
-
I have a 2.1 macbook running 10.5.8 can i Update It to 10.8.3 Mountain Lion Directly ?
-
Ghost Pictures of Desktop and Screen Saver best practice.
My Apple LCD Screen have only about 10 month and sometime i can see the edge of desktop picture who in my case is the Apple Rocks Collection Desktop Picture , i use 30 minutes before Screen Saver kick-in and 30 minutes before LCD Screen go to sleep .