Wlc 5508 invalid ipad mac address

Hello,
Help me pls,
While configuring mac address filter on a WLC 5508 there is problem with mac address beginning with 77:....
I cant add it to WLC mac filter.
Thanks in advance

If you are using dot1x then no, the mac address is sent since the client does not receive an ip address till authetication succeeds.
Sent from Cisco Technical Support Android App

Similar Messages

  • ISE and WLC 5508 IP and MAc address

    Hi!
    Is it possible that we recibe IP address and Mac address Client at the same time in ISE ?
    The wlc permits choose radius Call station ip type MAC or IP, but not both.
    Thanks you,

    If you are using dot1x then no, the mac address is sent since the client does not receive an ip address till authetication succeeds.
    Sent from Cisco Technical Support Android App

  • HT1695 iPad MAC address

    How do I find my iPad MAC address to connect to the Internet!

    Hi
    Settings > General > About > Wi-Fi Address. You'll also see the Bluetooth's MAC Address also listed.
    HTH?
    Tony

  • PC22224 switch fails on boot with message "Invalid switch MAC address"

    Ok moderators, I know this is a nonsupported product, but you moved all Switch messages to the archive.  This seemed to be the most appropriate folder for it.  Hope that's ok?
    I have a NEW (can you believe it?) PC22224 managed Cisco/Linksys switch with a problem.  When it boots, it passes all tests until it is almost ready to run, then I get this message:
    Checking file integrity..... Done
    Decompressing Code Image.... Done
    System PANIC.....
    Invalid switch MAC address
    Does anyone know how to correct this problem?  I can find nothing on it anywhere on the web.
    Thanks in advance!
    Kid

    Hi kidbyte!
    All Linkys Business Series are now part of Cisco Small Business. For
    discussions about this product, please go here.

  • WLC 5508, vlan select, reserved address in external DHCP server

    Hi guys,
    I have a deploy with a WLC 5508 version 7.0.116.0, APs mode local and vlan select feature enable. The issue is that the reserved IP address in external DHCP server not work. The DHCP contains a reserved IP address associates with mac address, but the assignement of IP is not match with de policies in DHCP. All others services operate normally.
    This reserved assignment operate previusly to modificate the WLAN to vlan select feature. Help me to improve this situation.
    Thanks.-
    Best regards

    Hello Abhishek, thanks for you quick answer....
    the link was a document used for the deploy, but not especifict nothing about the reserved IP address for particular host. In other words, the reserved IP address (through MAC address) in external DHCP server not work when "vlan select" its enable.

  • WLC 5508 , AP client dhcp address different from WLAN interface VLAN subnet?

    Hope the title makes sense, here's my situation: I have multiple businesses on 1 WLC 5508, there's a LAG to my core switch with seperate interfaces for each, broken up by vlans.
    My question is: if i have a WLAN setup to use interface "Company A" which is vlan 10 with an ip of 10.0.1.5 which then points to 10.0.1.10 for dhcp.
    Can the WLAN client connecting to the Company A WLAN use an IP in a different IP range?(192.168.1.10?) can the wlc route? from the perspective of the DHCP server where doers the request come from? (10.0.1.5?)
    Can the DHCP server 10.0.10.10 on vlan 10 respond back with and ip on a different subnet to assign to the client to use and still be fully fonctioning? would the default gateway for the client need to be 10.0.1.5?  So the clients ip would be 192.168.1.10 /24 with a gateway of 10.0.1.5 (ip adress fo vlan10 interface on WLC) And if multiple clients on the same subnet wanted to talk to each other woudl the WLC know how to route them to each other without passing through the default gateway?
    Sorry if this is confusing I'm having a bit of a hard time explaining it in works, i can try and draw somethign up if it makes more sense.
    thanks
    Eric

    I think if you want these clients to stick to a WLAN configured on a VLAN that has a different IP addressing you could configure your VLAN with the normal IP addressing then add on the SVI the 2nd IP_Class_default_gateway.
    E.G.
    Vlan 10
    interface vlan 10
    ip address 10.0.10.1 255.255.255.0
    ip address 192.168.1.1 255.255.255.0 secondary
    Clients that receive IP address from 192.168.1.0/24 network will be able to reach 192.168.1.1 and all traffic will pass right.

  • Collecting bulk IPad MAC addresses

    HI all-
    I work at a school that has a few hundred IPads, and i want to set up MAC Address filtering on the network.  Is there a way to collect all the serial numbers and MAC addresses from the master MacBook? I really do not want to have to manually collect them from each IPad manually.
    Thanks for any help!!

    As far as I can tell, since I too wanted this information, Apple Configurator is not storing it.  All of the Apple Configurator state (for users, apps, and in this particular case of interest, devices) are stored in two SQLIte databases.  As the currently running user of Apple Configurator (it depends how you use it), they are in:
    ~/Library/Application Support/com.apple.configurator/AppleConfigurator.storedata
    ~/Library/Application Support/com.apple.configurator/Users.storedata
    The names should be self-explanatory, but more or less the latter is blank for me, probably because I do not set users for the iPads we loan out in our organization and deployment model, so there is nothing to correlate to my empty user list.  However, if you look in AppleConfigurator.storedata, you will find a table called ZDEVICERECORD with the following columns:
    Z_PK
    Z_ENT
    Z_OPT
    ZNAME
    ZSERIALNUMBER
    ZUDID
    As you can tell, the only two columns of value to us Administrators are something we could already determine without look at the internals: the device's serial number and the Unique Device ID which is tied to a specific installation of iOS on an iPad or iPhone.  I have seen mention that turning iTunes into Activation Only mode will help, but I call shennanigans.  But when I have some iPads back I will try this and see if that data is stored.  I am skeptical.

  • WLC 5508 and Client IP addresses

    we have installed our first 5508 in a small remote office.  I setup a DHCP range on the 5508 to give the AP's a IP address.  After that I changed the AP's to have static IP address.  I wish for the wireless clients to use our DHCP servers here at the home office, so I shut down the DHCP service on the 5508.  Now the Clients will not get an IP address.  So now I re-enable the scope and the clients get an IP address.  How do I configure the 5508 so that the wireless clients will get an IP address from our DHCP servers and not the 5508?

    Go to WLAN > click the SSID of your choice > Advanced tab > click on "DHCP Server" and enter the DHCP Server.

  • Invalid Mac-address.

    Dear NetPro,
    Does anyone can guide me what to do now ?
    your reply will be highly appreciated.
    2006-03-05 16:31:53 Local7.Info xxx.xxx.xxx.xxx 417: Mar 5 16:40:08.885: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: Packet received with invalid source MAC address (45:00:00:3C:A6:D4) on port Fax/xx in vlan xxx
    Regards,
    Jack

    Hi Jack,
    How many of these packets are you getting ? If it's a small number, I would not worry about it too much.
    However, if the number is significant you might not need to isolate it to the application on the server. In general, the IP to MAC conversion is done by the ethernet stack. But it may be an issue with the NIC or a mis-behaving application. It is not always easy to find out which application is causing it. You could do a couple of things (but none of those may solve the problem):
    - replace the NIC
    - shut down one app on the server at a time and see if the packets stop
    Hope that helps - pls rate the post if it does.
    Paresh

  • Where do I find the MAC address on an ipad 2

    I just purchased an apple ipad 2, since i have not been on an apple computer for some time i need help setting up  my wifi. to start with i need the MAC address so I can put it in my router and get to the internet. can somone please help
    scott

    Try this:
    http://apple-ipad-tablet-help.blogspot.com/2010/03/how-to-find-ipad-mac-address. html
    -Ben

  • How to find the MAC address of my iPad2?

    My WiFi hot spot has MAC address filter for better security.
    But I cannot find the MAC address of my new iPad2.

    If you need to setup wifi to start the MAC address with iPad, try  the http://www.ipad-tablet-help.com/2010/03/how-to-find-ipad-mac-address.html   to find it out.  Works for iOS5.

  • Different AP MAC address shown on wireless client logs

    Hello Everyone,
    I am really a rookie on wireless networks.
    I am investigating an issue where people is unable to do wireless at 2 floors in a building. We are using LAPs.
    I asked a person onsite to send me some logs from his Intel Proset tools. The report he emailed me shows no IP Address is being assigned to his PC.
    I noticed that the AP MAC address on the logs he provided is lets say ##:##:##:2D:AC:61, I check on the WLC and the AP MAC address is actually
    ##:##:##:2D:AC:60
    Is that an expected behavour, a known issue or something like that?
    Your input will be appreciated.
    Thanks,
    David M.

    David,
    Yes, its the virtual mac. I actually blog in detail about this subject of the virtual mac. Read the below link and you will have your answer!
    http://www.my80211.com/home/2011/5/2/wlc-how-cisco-virtualizes-the-base-radio-mac-address-on-the.html
    If you find this helpful please kindly support the CSC rating system!
    btw -- Welcome to the world of WiFi!

  • Two MAC Addresses are showing up under one device

    I have an AC1900. My Son and I both have iPad's. In the device list in Smart Wi-Fi, it shows both devices as one. 
    How do I split these out into two devices so I can manage my son's device with parental control?

    Did you confirm that the iPads MAC addresses by looking in the iPads settings?
    Are both the iPads named the same in the device?
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Replication of Mac-Address in HA WLC 5508

    Hi,
    we have two 5508 WLC and they are in HA, 
    1)just wanted to know whenever i add new user mac address to the Primary WLC, then how it will replicate to Secondary WLC. 
    1)if BOX TO BOX connectivity is not there ( other is connected to LAN) Then how we can achieve HA.

    Hi Sudhir,
    In Box to Box connection: Controllers have a dedicated HA(Redundency) port, which is used to synchronize configuration between controllers in the Active and Standby states.
    The redundancy port is used for configuration, operational data synchronization, and role negotiation between the primary and secondary controllers.
    Bulk configuration during boot up and incremental configuration are synched from the Active WLC to the Standby WLC using the Redundant Port.
    Hope it helps.
    Regards
    Dont forget to rate helpful posts

  • IPhones not taking ipv4 addresses on Unified Wireless (WLC 5508 and AP 3602)

    This is a really odd one...
    Earlier this week we started having issues with our BYOD wireless network (802.1x, WPA2+AES) but only with Apple devices (iphone and ipad). Employees with Android or Windows phones are not having any problems at all.
    A brief summary of what's observable for the issue:
    Radius authentication succeeds (PASS observable in ACS logs)
    IPhone status viewed on both controllers (foreign anchor in DMZ as well as corporate WLC) shows phone associated.
    Debug client output shows an IPv4 address is actually being assigned to the phone however it appears to ignore it and restart the DHCP request process so debug output shows what looks to be a loop of DHCP request and offer stages.
    Infrastructure notes
    Cisco WLC 5508s are all running 7.4.121.0 (tried rolling back to 7.2.110.0 .....didn't help)
    APs are all 3602I-N-K9
    DHCP for the BYOD network is running on the anchor in the DMZ however this was temporarily moved to a switch (had no effect).
    Any ideas?
    DHCP Loop:
    *mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 93, Local Bridging intf id = 12
    *mmListen: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 RUN (20) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
    *pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Set bi-dir guest tunnel for a4:c3:61:7a:1a:4f as in Export Anchor role
    *pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f 0.0.0.0 Added NPU entry of type 1, dtlFlags 0x4
    *pemReceiveTask: Apr 30 11:44:50.476: a4:c3:61:7a:1a:4f Pushing IPv6: fe80:0000:0000:0000: 0c00:0c94:459e:a9db , and MAC: A4:C3:61:7A:1A:4F , Binding to Data Plane. SUCCESS !!
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 0.0.0.0
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 172.24.16.251
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
    *DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
    *DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
    *DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
    *DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Proxy Task: Apr 30 11:44:50.479: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
    *DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 172.24.16.102
    *DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Proxy Task: Apr 30 11:44:50.480: a4:c3:61:7a:1a:4f DHCP   server id: 0.0.0.0  rcvd server id: 172.24.13.251
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 1, flags: 0
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 0.0.0.0
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 172.24.16.251
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
    *DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
    *DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
    *DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
    *DHCP Proxy Task: Apr 30 11:44:51.649: a4:c3:61:7a:1a:4f DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
    *DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 172.24.16.102
    *DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Proxy Task: Apr 30 11:44:51.650: a4:c3:61:7a:1a:4f DHCP   server id: 0.0.0.0  rcvd server id: 172.24.13.251
    *DHCP Socket Task: Apr 30 11:44:53.754: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 3, flags: 0
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 0.0.0.0
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 172.24.16.251
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 172.24.16.102
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Proxy Task: Apr 30 11:44:53.755: a4:c3:61:7a:1a:4f DHCP   server id: 0.0.0.0  rcvd server id: 172.24.13.251
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP selected relay 1 - 172.24.13.251 (local address 172.24.16.251, gateway 172.24.16.254, VLAN 93, port 13)
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP transmitting DHCP DISCOVER (1)
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 1
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 8, flags: 0
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 0.0.0.0
    *DHCP Socket Task: Apr 30 11:44:58.594: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 172.24.16.251
    *DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selecting relay 2 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,
                            dhcpGateway: 0.0.0.0, dhcpRelay: 172.24.16.251  VLAN: 93
    *DHCP Socket Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP selected relay 2 - NONE
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP received op BOOTREPLY (2) (len 572,vlan 0, port 0, encap 0x0)
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP sending packet in EoIP tunnel to foreign 10.65.31.8 (len 346)
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP transmitting DHCP OFFER (2)
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   xid: 0x7e549f4a (2119475018), secs: 0, flags: 0
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   chaddr: a4:c3:61:7a:1a:4f
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   ciaddr: 0.0.0.0,  yiaddr: 172.24.16.102
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   siaddr: 0.0.0.0,  giaddr: 0.0.0.0
    *DHCP Proxy Task: Apr 30 11:44:58.595: a4:c3:61:7a:1a:4f DHCP   server id: 0.0.0.0  rcvd server id: 172.24.13.251
    *DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP received op BOOTREQUEST (1) (len 308,vlan 92, port 13, encap 0xec05)
    *DHCP Socket Task: Apr 30 11:45:07.059: a4:c3:61:7a:1a:4f DHCP selecting relay 1 - control block settings:
                            dhcpServer: 172.24.13.251, dhcpNetmask: 0.0.0.0,

    Thanks Scott,  here you go...
    On Foreign:
    WLAN Identifier.................................. 2
    Profile Name..................................... BAI-Beta
    Network Name (SSID).............................. BAI-Beta
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Disabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 42
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 86400 seconds
    User Idle Timeout................................ 300 seconds
    --More-- or (q)uit
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... CHTWLC
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Enabled
    Static IP client tunneling....................... Disabled
    PMIPv6 Mobility Type............................. none
    Quality of Service............................... Bronze
    Per-SSID Rate Limits............................. Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Per-Client Rate Limits........................... Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    --More-- or (q)uit
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Scan Defer Priority.............................. 5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Disabled
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ 172.24.13.20 1812
       Accounting.................................... Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    --More-- or (q)uit
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Disabled
             AES Cipher.............................. Enabled
                                                                   Auth Key Management
             802.1x.................................. Enabled
             PSK..................................... Disabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
    --More-- or (q)uit
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Enabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    --More-- or (q)uit
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
     Mobility Anchor List
     WLAN ID     IP Address            Status
     2           172.24.13.251        Up
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    On Anchor:
    WLAN Identifier.................................. 1
    Profile Name..................................... BAI-Beta
    Network Name (SSID).............................. BAI-Beta
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Disabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
      Client Profiling Status ....................... Disabled
       DHCP ......................................... Disabled
       HTTP ......................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 48
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 86400 seconds
    User Idle Timeout................................ 300 seconds
    --More-- or (q)uit
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... CHADWLC01
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ bai-beta
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    mDNS Status...................................... Enabled
    mDNS Profile Name................................ default-mdns-profile
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Enabled
    Static IP client tunneling....................... Disabled
    PMIPv6 Mobility Type............................. none
    Quality of Service............................... Bronze
    Per-SSID Rate Limits............................. Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Per-Client Rate Limits........................... Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    --More-- or (q)uit
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Scan Defer Priority.............................. 5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Disabled
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ 172.24.13.20 1812
       Accounting.................................... Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    --More-- or (q)uit
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Disabled
             AES Cipher.............................. Enabled
                                                                   Auth Key Management
             802.1x.................................. Enabled
             PSK..................................... Disabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
    --More-- or (q)uit
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Enabled
       FlexConnect Local Switching................... Disabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
    AVC Visibilty.................................... Disabled
    --More-- or (q)uit
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
     Mobility Anchor List
     WLAN ID     IP Address            Status
     1           172.24.13.251        Up
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled

Maybe you are looking for

  • Mail enabled list not picking up items from the drop folder.

    Hi all,  I'm sorry if this has already been addressed but my searches didn't turn up anything that helped. Our site has some mail enabled lists, that used to work and now do not.  Here is a list of things I've verified and done. 1.  Verified that ema

  • ORA-31000 when register schema in oracle 10g

    I am trying to register a schema in oracle10g rel2. The schema contain "<xs:include schemaLocation="papiNetCommonDefsV2R31.xsd"/>" and papiNetCommonDefsV2R31.xsd is successfully registered in Oracle repository. But i am still getting the error as 1 b

  • Query- Variable Alternate Unit

    Friends, I searched sdn and googled also. I am unable to find my solution. Pls help. My requirement is to find out Prod. Qty in alternate Unit of measure for different materials each have got different alternate unit . For eg. If a material is having

  • Left justify text in number field

    Hi, I would be grateful if someone could tell me how to display the text (returned from a loop) in a number field so that it is left justified - also where would it have to be set? The 'justification' setting when set to 'Left' doesn't achieve this.

  • Encoder issue?

    I have checked all the online forums, even beyond the official "adobe" forums, with no help. Here is my situation: I have used Adobe Media Encoder to "encode" all my footage from Premiere CC to .m2v files (the mpeg 2 for video files, recommended for