WLC 5508 Multiple Interfaces for Multiple SSIDs

Hello guys,
I am trying to build a new network from scratch, I have the WLC 5508 w/ Aironet 3600e APs connected to my Netgear Smart Switches and a Linksys RV082 router that I'm using as my DHCP server with several VLANs for several stuff on my Switches.
I have 2 questions:
1. Can I have 5 Interfaces configured on 5 different VLANs, each SSID on each a different Port:
Port 1: Controller management only=> 192.168.x.x /24
Port 2: SSID 1: WiFi Internal=> 172.16.x.x/12 (Radius Auth with no sharing)
Port 3: SSID 2: WiFi Internal w/ sharing=> 192.168.x.x/24 (Radius Auth with sharing)
Port 4 :SSID 3: WiFi Guest=> 10.0.x.x/8 (Web Auth)
Port 5: SSID 4: WiFi IT=> 192.168.x.x/24 ( Radius or certificate Auth with access to the controller management interface)
2. How can I use the Controller as the DHCP server for all the WiFi traffic, and how should that be configured to work with my other DHCP server?

Yes you can... but you have to disable LAG. Each post will need to be connected to a dot1q trunk and you will only allow the vlan that is required for that port. Also on the interface, you will define what port is primary and what is backup. I'm guessing you will not be using the backup port. For example... port 1 that connects to a trunk port will only allow the management vlan. Here is a link to setup dhcp on the WLC
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080af5d13.shtml
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Similar Messages

Assigning multiple interfaces for Oracle API Gateway (OAG)

We are deploying Oracle API Gateway to throttle our incoming API requests. We would like to keep the incoming external API requests separate from the internal configuration management so that they go through different interfaces when accessing the OAG server. This is mainly for security reasons so that the external people won’t have access to the interface used by internal operations team to manage OAG. Based on your experience, is there any standard best practice to accomplish this? We were thinking to perhaps use two of the server’s network interfaces with different IPs, one for the incoming API requests and the other for the internal admin management of OAG. But not sure if this is the best way to do what we need. We are aware of OAG's capability to support two separate ports to handle this situation, but would like a more secure set-up that could completely eliminate external access to the OAG management done by the IT team.
Would appreciate any thoughts on best practices used regarding multiple interfaces for OAG set-up. Thank you. Oracle Marketing Cloud.

You are on the right track.
Here is how you can achieve this:
You can use multiple network interfaces on the UNIX machine and setup networking/routing in such a way that all external traffic comes on on one card and is routed internally via a different card.
Segregate difference types of services (i.e to be used by external clients vs internal apps) into difference different "Service Groups". Have each of these service groups listen on different port + NIC card (under Listeners, you can define a port to list to list on a specific network address and port instead of *).
Setup additional protection for services that will be accessed by external clients. Use "Threatening Content " filter to protect your services.
Setup 2 way SSL for the interface that will be called by external clients. Setup a DN based authorization check if you want to have both authentication and authorization.
Hope this helps.
-Thanks,
Ankit Kumar

User Interface for Multiple Sensors

Hi all,
I want to create an application where in i should be able to acquire data for Accelerometer, pressure, strain, LVDT and Temperature sensors. I want to create a Font Panel as shown in the attachment, i should configure any of the sensors by selecting the check box. Please find the attachment.
I created the prototype design using NI Signal Express, i am not able to customize the Step Set-up window as per my requirements(Shown in the attachment).
Any help regarding how to go about it, whether in LabVIEW or in Signal Express. I would be really glad if you any ideas.
Regards,
KM
Attachments:
LabVIEW Signal Express.vi ‏367 KB
User Interface for Multiple Sensors.png ‏115 KB
LabVIEW GUI.seproj ‏1156 KB

You can certainly do what you want in LV, but you all have to create the UI manually. Beyond that, this configuration dialog is just another LabVIEW program.
What exactly is the problem you are having? I can't open your code because NI still hasn't released the beta version of LabVIEW 2015 for Android.
Mike..
PS: Yes, the comment about LabVIEW 2015 is a joke! Unless of course there really is an Android version coming, in which case I just amazed myself...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to use multiple Interfaces for the same BS?

Hi @ ,
Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
Any help will be highly rewarded
Regards

Hi-
Yes it is possible you can use multimapping for mapping the interfaces.
To know more about multimapping see
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
Some more helpful links
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

Using Ciscoworks to update netmask on mgmt interface for multiple switches

Is it possible to user Ciscoworks LMS 3.2 to update the netmask for a management interface on multiple switches? For example, say I have a 3750 access switch management network, 172.28.185.0/27 (default gateway 172.28.185.1) that we're resizing to a /26. Is there a simple way to update just the netmask for the management interface on those devices using Netconfig?
-David

Unfortunately not. You could use Netconfig or even baseline compliance for this, but since you need to know each interface's IP, that means you'd have to create parameterized templates. Therefore, you would have to create a template "answer" file for each device in this subnet which had their IP address for the interface in question.
Baseline compliance might be a little easier with a template like:
Commandlet : CheckIP
IsPrereq : Yes
Submode : interface [#.*Ethernet.*#]
+ ip address [#172.58.185.\d+#] 255.255.255.224
Commandlet : ReplaceIP
Parent : CheckIP
+ ip address [IP] 255.255.255.192
You would still need to provide a value for [IP] for each device when performing a deployment.

[solved] Arch linux access point with multiple interfaces for the NAT

Hi, I have a router running Arch linux. It is connected via LAN (let's call it eth0) to the internet. It has a second LAN interface, eth1, and a wireless interface in master mode, wlan0.
Now, Everything works perfectly except providing network connectivity on eth1 and wlan0 simultaneously. I followed the guide in the "Internet share" wiki article and use dnsmasq/hostapd for the AP. It appears as if all traffic from the router is sent to the wlan0 interface, even if it came in through eth1 (for example, dhcp requests). I cannot really find information how to solve this. The words "bonding" and "iptables" are floating around, but there is not really an easy to understand tutorial for this.
What do I need to do to use both the eth1 and wlan0 interface (for different clients!) on my router?
Best regards, and thank you in advance
Jan Oliver
/e: This seems to be my problem: http://www.novell.com/support/kb/doc.php?id=7000318 How do I solve this using the usual iptables? (The way described in the article doesn't work: "RTNETLINK answers: No such process" errors.)
Last edited by janoliver (2013-09-25 22:24:53)

Or you could bridge eth1 and wlan0, and make dnsmasq bind/listen on that bridge...

WLC 5508 management interface

Hi, I have a particular wireless design that requires one WLC 5508 to be connected to two seperate swithces. Port 1 of WLC is connected trunk to Switch A and Port 2 of WLC is connected to Switch B. Each switch has its own local VLANS. When I connect 1130s LAPs they need to find the management interface initially and then use only AP management interfaces. since there is only one management interface, if I assign management interface on a vlan that is configured on switch A then APs on switch A join fine but those on switch B keep asking for management interface and from capwap debug on WLC it says that join request was received on wrong ineterface ....
the only work around to this was to make routing between switch A and switch B for the two vlans on which APs reside... but for security purposes - client would like to avoid this
any help much appreciated ..

Hi thanks for your reply,
Yes I agree perfectly with your explanation - On both switches I have UDP forward for 5246 and 5247 and everything works fine.
You understood exactly what's happening for initial discovery the Guest AP asks for managemnt interface through WLC port 2 but managerment IP is on admin side WLC port 1 and then it drops packet saying that it was received on the wrong port. In fact that is why I put an ACL between the Admin switch and guest switch taht allows only 5426 capwap control - just to allow that initial discovery from guest AP to contact Management interface which can only be assigned to one port and in my case it is on the admin switch side. And that is why I had to make a route between the two independent switches.
My question is to know if there is any other way with my given design to eliminate this initial discovery to the management inetrface, as my client would like the admin and guest switches to be completely seperated i.e. without the routing. Is there any way that the guest APs can make contact with the AP management interface on their side only skipping the discovery of the management interface ? the guest APs were primed on the admin side so they know the IP. After the initial discovery, if I remove the routing between admin and guest switch, guest APs keep their connectivity without any problems.

Need Information of cisco WLC 5508 LAG Interface

HI
We have cisco WLC 5508 in our network and right now ,this WLC is connected to two ports of each core switches.Both CORP and GUEST SSID are configured on this WLC.
Now we want to segregate the trafffic og GUEST to on core switches from WLC. SO my question is ,how can we achieve this without using guest anchor controller ?
Can i use one interfcae cisco WLC 5508 and connect it to the firewall or any device ?
Thanks
Puneet

Hi
Thanks ...I am using WLC as a DHCP server for Guest.
So i want to know ,is there any requirement that GUEST subnet should be pingable from WLC management IP address.
my topology is here...
Corp network and management network are reachable however management metwork is not pinagble from guest netowrk.

WLC-5508 Authorization failed to create SSID

Hi All,
I have two WLC-5508 for 50 AP's deployed. One is primary controller & other is secondary.
Recently noticed an unknown "authorization failed, no sufficient privileges for user" message poping up while making configuration changes
in WLC. Specificly when trying to create an new SSID. WLC Authentication is local. This message poped up earlier once or twice but it didnt prevent
from making changes that time.
How to troubleshoot ?
Regards
Gautam

Do you have any radius configured on the WLC by chance. If so can you make sure you don't have management checked there. I have not seen that issues with the 5508 and any of the 7.x code as of yet.
Sent from Cisco Technical Support iPhone App

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

Multiple values for multiple fields sharing common id

I'm new to Reporting Services and I need to create report based on a common child id that includes multiple values from multiple fields in several tables. I can combine all the values into one query for a list report; however, this causes the rows to duplicate
multiple times based on the differing fields having multiple values (i.e. report contains various child ids and multiple medication dates/names, multiple health diagnoses with onset dates, multiple health service dates/values, multiple immunization types and
service dates, etc). If I create a list report and try to use various tables, I run into problems with how the tables view the data due to the duplicating child id rows from multiple field values on that child id. If I hide duplicates for these different tables,
I can run into spacing issues from the duplicating rows and/or hiding data that shouldn't be hid.
I need the report to have the basic non-duplicating child info (id, name, basic health info) and then also have various sections that contain fields with numerous values (i.e. section for health issue name and onset dates, section for medication name and
prescription dates, section for health service name and service date, etc). I would want a page break after each child id and would want all the child ids to be viewed/exported for printing purposes at the same time (i.e. not choosing one child id at
a time to print or view the data). I have tried to create one main table on a list report with various subreports on the child id; however, this is hard for my machine to process (it takes forever) and I can only view/export one child id at a time when I use
child id as the report parameter.
Any help you can give this newbie would be greatly appreciate.
Thanks,
Melissa S.
What's the best way for me to
MelissaS

Hi simpson213,
According to your description, you have some questions about your report design.
1. How to have non-duplicating child info?
In this scenario, since you don't want to hide the duplicate data, we suggest you filter the duplicated records on query level by using Distinct statement. If you want to do it on report level, you can group
records on chid id and use First() function on other fields.
Reference: First Function (Report Builder and SSRS)
2. How to have various sections that contain fields with numerous values?
We can also add these fileds into the child group of child and have them toggled by child id.
Reference: Add an Expand/Collapse Action to an Item (Report Builder and SSRS)
3. How to add a page break between each child?
Right click on the Row Group(child id)->Page Break->Select between each group instance.
Reference: Add a Page Break (Report Builder and SSRS)
4. How to select multiple child id when rendering report?
When creating parameter, select Allow multiple values in General.
Reference: Add, Change, or Delete a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to call adobeform multiple times for multiple selection.

Hello Experts,
Good morning.
I am new to ABAP,
I am working on one program which is used for printing a bank voucher for that i have to select multiple document number (BELNR), it is running fine with selecting a single document but for multiple selection i have to call adobeform multiple times.
Can anyone give me the solution how to do this.
Any suggestion will be appreciated.
Regards,
Dipen Pandya.

Yes i have done the same way.
Please have a look at my code.
REPORT zfi_print_bank_voucher.
TABLES: bkpf,
         bseg,
         skat.
TYPES : BEGIN OF lv_main,
        belnr TYPE bkpf-belnr,
        xblnr TYPE bkpf-xblnr,
        ebeln TYPE bseg-ebeln,
        bankn TYPE lfbk-bankn,
        budat TYPE bkpf-budat,
        bldat TYPE bkpf-bldat,
        bedat TYPE ekko-bedat,
        bankl TYPE lfbk-bankl,
        lifnr TYPE lifnr,
        END OF lv_main.
TYPES: BEGIN OF st_bseg,
         ebeln TYPE bseg-ebeln,
         bukrs TYPE bseg-bukrs,
         buzei TYPE bseg-buzei,
         hkont TYPE bseg-hkont,
         bschl TYPE bseg-bschl,
         saknr TYPE skat-saknr,
         txt20 TYPE skat-txt20,
         kostl TYPE bseg-kostl,
         mwsts TYPE bseg-mwsts,
         dmbtr TYPE bseg-dmbtr,
         belnr TYPE bseg-belnr,
       END OF st_bseg.
TYPES: BEGIN OF i_desc,
         spras TYPE skat-spras,
         saknr TYPE skat-saknr,
         txt20 TYPE skat-txt20,
   END OF i_desc.
TYPES: BEGIN OF st_bkpf,
        belnr TYPE bkpf-belnr,
        xblnr TYPE bkpf-xblnr,
        budat TYPE bkpf-budat,
        bldat TYPE bkpf-bldat,
   END OF st_bkpf.
TYPES: BEGIN OF st_lfbk,
         bankn TYPE lfbk-bankn,
         bankl TYPE lfbk-bankl,
   END OF st_lfbk.
TYPES: BEGIN OF st_ekko,
         ebeln TYPE ekko-ebeln,
         bedat TYPE ekko-bedat,
   END OF st_ekko.
DATA: it_bseg TYPE STANDARD TABLE OF st_bseg,
       wa_bseg TYPE st_bseg.
DATA: it_bkpf TYPE STANDARD TABLE OF st_bkpf,
       wa_bkpf TYPE st_bkpf.
DATA: it_desc TYPE STANDARD TABLE OF i_desc,
       wa_desc TYPE i_desc.
DATA: it_lfbk TYPE STANDARD TABLE OF st_lfbk,
       wa_lfbk TYPE st_lfbk.
DATA: it_ekko TYPE STANDARD TABLE OF st_ekko,
       wa_ekko TYPE st_ekko.
DATA: fname TYPE funcname,
       ls_outputparams TYPE sfpoutputparams,
       logo_bin TYPE xstring.
DATA: ls_result TYPE sfpjoboutput.
DATA: it_main TYPE STANDARD TABLE OF lv_main,
       wa_main TYPE lv_main.
DATA: i_bseg TYPE ztt_bseg WITH HEADER LINE.
DATA: ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE t001.
SELECT-OPTIONS bukrs FOR bkpf-bukrs OBLIGATORY DEFAULT '1000' NO-EXTENSION NO INTERVALS.
SELECT-OPTIONS belnr FOR bkpf-belnr OBLIGATORY.
PARAMETERS: year LIKE bkpf-gjahr DEFAULT sy-datum+0(4) OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
   t001 = 'Enter Specific Details'.
START-OF-SELECTION.
   PERFORM feeding_data.
   PERFORM print_form.
*&      Form print_form
*       text
FORM print_form.
   CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
     EXPORTING
       i_name     = 'ZFI_BANK_VOUCHER_FORM'
     IMPORTING
       e_funcname = fname.
   ls_outputparams-bumode = 'M'.
   CALL FUNCTION 'FP_JOB_OPEN'
     CHANGING
       ie_outputparams = ls_outputparams
     EXCEPTIONS
       cancel          = 1
       usage_error     = 2
       system_error    = 3
       internal_error = 4
       OTHERS          = 5.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
   LOOP AT it_main INTO wa_main.
*at new belnr.
     PERFORM controll_internal.
     CALL FUNCTION fname "'/1BCDWB/SM00000237'
       EXPORTING
*   /1BCDWB/DOCPARAMS        =
         belnr_d                  = wa_main-belnr    "bkpf
         lifnr                    = wa_main-lifnr
         xblnr                    = wa_main-xblnr      "bkpf
         ebeln                    = wa_main-ebeln      "bseg
         bankn                    = wa_main-bankn      "lfbk
         budat                    = wa_main-budat      "bkpf
         bldat                    = wa_main-bldat      "bkpf
         podat                    = wa_main-bedat      "ekko
         bankl                    = wa_main-bankl      "lfbk
         itab_bseg                = i_bseg[]
* IMPORTING
*   /1BCDWB/FORMOUTPUT       =
      EXCEPTIONS
        usage_error              = 1
        system_error             = 2
        internal_error           = 3
        OTHERS                   = 4
     IF sy-subrc <> 0.
* Implement suitable error handling here
     ENDIF.
   ENDLOOP.
   CALL FUNCTION 'FP_JOB_CLOSE'
     IMPORTING
       e_result       = ls_result
     EXCEPTIONS
       usage_error    = 1
       system_error   = 2
       internal_error = 3
       OTHERS         = 4.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
ENDFORM.                    " PRINT_FORM
*&      Form FEEDING_DATA
*       text
* --> p1        text
* <-- p2        text
FORM feeding_data .
   SELECT ebeln
           bukrs
           buzei
           hkont
           bschl
           kostl
           mwsts
           dmbtr
           belnr
      FROM bseg INTO CORRESPONDING FIELDS OF TABLE it_bseg
                WHERE bukrs IN bukrs
                    AND belnr IN belnr.
   SELECT saknr txt20 FROM skat
     INTO CORRESPONDING FIELDS OF TABLE it_desc
       FOR ALL ENTRIES IN it_bseg
             WHERE saknr = it_bseg-hkont AND
                   spras = sy-langu.
   IF it_desc IS NOT INITIAL.
     LOOP AT it_bseg INTO wa_bseg.
       READ TABLE it_desc INTO wa_desc WITH KEY saknr = wa_bseg-hkont.
       IF sy-subrc = '0'.
         wa_bseg-txt20 = wa_desc-txt20.
         MODIFY it_bseg FROM wa_bseg.
       ENDIF.
     ENDLOOP.
   ENDIF.
   SELECT * FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_main
           WHERE belnr IN belnr AND
                 shkzg = 'S'.
   LOOP AT it_main INTO wa_main.
     SELECT SINGLE lifnr FROM bseg
       INTO wa_main-lifnr
       WHERE belnr = belnr-low.
     SELECT SINGLE bankl bankn FROM lfbk
            INTO (wa_main-bankl, wa_main-bankn)
            WHERE bankl = wa_main-lifnr.
    SELECT SINGLE budat bldat FROM bkpf
      INTO (wa_main-budat, wa_main-bldat)
      WHERE belnr = belnr-low.
     SELECT SINGLE bedat FROM ekko
            INTO wa_main-bedat
            WHERE ebeln = wa_main-ebeln.
     MODIFY it_main FROM wa_main.
     CLEAR wa_main.
   ENDLOOP.
ENDFORM.                    " FEEDING_DATA
*&      Form CONTROLL_INTERNAL
*       text
* --> p1        text
* <-- p2        text
FORM controll_internal .
   LOOP AT it_bseg INTO wa_bseg.
* lw_bseg = wa_bseg.
     AT NEW belnr.
       i_bseg-buzei = wa_bseg-buzei.
       i_bseg-hkont = wa_bseg-hkont.
       i_bseg-bschl = wa_bseg-bschl.
       i_bseg-txt20 = wa_bseg-txt20.
       i_bseg-kostl = wa_bseg-kostl.
       i_bseg-mwsts = wa_bseg-mwsts.
       i_bseg-dmbtr = wa_bseg-dmbtr.
       APPEND i_bseg.
      ENDAT.
   ENDLOOP.
ENDFORM.                    " CONTROLL_INTERNAL

Backup Port of WLC 5508 MGMT interface

Dear All,
Since WLC5508 MGMT interface is configured a AP-Mgr at the same time, can I set a Backup Port to WLC5508 MGMT interface?
Refer to WLC configuration Guide:
In the Backup Port text box, enter the number of the backup port assigned to the management interface. If the primary port for the management interface fails, the interface automatically moves to the backup port.
NoteDo not define a backup port for an AP-manager interface. Port redundancy is not supported for AP-manager interfaces. If the AP-manager interface fails, all of the access points connected to the controller through that interface are evenly distributed among the other configured AP-manager interfaces
I am confuse on this. Thus, if I need to configure the backup port for MGMT interface, i need to remove the AP-manager on MGMT interface and create a network dynamic interface for AP-Manager ?
Thanks all.
Jeff Chiu

Jeff:
You are right. The config guide is confusing.
The config guide is talking about AP-Manager interfaces you create other than the management one. For the management interface it is called "management" but it acts as an AP-Manager interface as well. When the config guide metnions "AP-Manager interface" it does not mean the management interface but it means AP-Manager interfaces that you create beside the management interface.
So, for the management interface you can create a backup port and I think if you are not using LAG it is a best practice to define a backup port for management.
For other AP-Manager interfaces that you create (other than the management interface) you don't need to define the backup port.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Wlc 5508 management interface vlan - access point vlan

Is it required that the access points are in the same vlan as the management interface on a wlc 5508?

There is a story behind this .. Just yesterday my guy was like "aps wont join" .. I let him hammer away at it .. It was the check box
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

One user interface for multiple VIs

I searched and searched for an answer to this so if it's out there please direct me to it.
I have an application that has roughly 10 different VIs. These VIs are virtually the same. All they are doing is monitoring data for the operator for instance: Temperatures, Pressures, Vibrations, etc.,. I would like to implement a user interface where the operator could click on a button at the bottom of the screen that would take them to the temperature screen. Once the temperature screen is displayed, I would like to be able to click on a different button that goes to the Pressure screen. In other words, I want the operator to be able to access any screen they want from any screen they are currently viewing. So all the buttons would be at the bottom of every screen. And any screen would be able to access any other screen. I just have not found a good way to do this. Every thing I've tried always ends up coming back to a "main.vi".
Multiple answers are welcome! Thanks.

Ben wrote:
DSC has a feature that lets you assign protection levels to each FP control.
Good to know, having never used DSC. Maybe something to add to my "toolbox" in the future.
CLA, LabVIEW Versions 2010-2013

WLC 5508 Multiple Interfaces for Multiple SSIDs

Similar Messages

Maybe you are looking for