WLS new installation SUN or Oracle JDK?

hi all,
i am in the middle of installing WLS the first time. can you give me your opinion whether i should stick with SUN JDK or Oracle JDK?
given my history i am very familiar with handling SUN JDKs and have no clue about Oracle JDK...
BUT which one of the two is better when running WLS?
regards chris

Hi Chris,
Sun JDK and JRockit both are built on the same source, in fact JRockit uses Sun API. Both has pros and cons.
When coming to JRockit you will be able to find support from weblogic team where Oracle has separate engineering team for JRockit. However there are lot of dependencies on Sun JDK.
As Ravi said now Sun is also part of Oracle so its your option to do the selection.
To find out the differences between Sun and JRockit please refer the following:
"Differences between Sun JVM and JRockit" in http://crkthoughts.blogspot.com/2009/12/weblogic-faqs.html
HTH
Regards,
RC2

Similar Messages

Oracle Portal 11g - New Installation

Hello,
I have worked a lot of with IAS 10.1.2.3. Now I want to install Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0). But I need the Portal for my old applications.
I have found the document 1364497.1 "New Direction for Oracle Fusion Middleware 11g with Single Sign-On 10g". In the document is a section "Oracle Portal 11g - New Installation" from 23-MAY-2012. This describe in Part 1 that I have to install the Infrasturcture of Oracle Identity Management 10g (10.1.4.0.1) . But I can't find the needed sources in the given donlaod path (http://www.oracle.com/technetwork/middleware/ias/downloads/101401-099957.html).
I found only Oracle Identity Management 10g (10.1.4.3). This version seems to me does not have an Infrasturcture.
I don't know which sources I have to download to install the temporary needed Infrasturcture. Can anybody help to find the right sources?
Thanks,
Frank

Hi Frank,
I'd prefer to get the document published first. Also a few comments with regards to the OAM installation path.
The benefits are :
<li>You will be using OAM straight from the beginning, no SSO in the picture
<li>You can install Oracle Portal with an 11g OID instead of a 10g OID (which you would get when installing IDM 10.1.4)
<li>You can use an 11.2 database for both the Portal and OID repository. With IDM 10.1.4 you are restricted to an 10.1 or 10.2 database as the installer does not support 11g.
There are some drawbacks as well :
<li>There will be no DAS solution (oiddas). Both User/Group creation should be done with different tools (ldif files, dbms_ldap API, provisioning from a 3rd party LDAP server) as well as User and Group LOVs in the access tabs of several Portal components won't work. You can still enter the name of the user and group in the input field to grant privileges
<li>The seeded login portlet does not work
Thanks,
EJ

Oracle XA driver problem with WLS 7.0.1.0, Oracle 9.0.1

We are using simplified chinese, after swith to bea jdriver, it messed up
all the encoding. So we cannot display Chinese character correctly.
We are using WLS 7.0.1.0, Oracle 9.0.1 on both Windows and Solaris 8
environment, BEA supplied JDK 1.3.1_03.
We have many diffrent problems with oracle drivers:
1. We want to use XA driver to support distributed transaction, However:
* bea jdriver xa messes up with encoding
* when using oracle 901 driver, everything works fince except webservices.
Workshop application access the ejb, then the workshp application sets
isolation level, but oracle driver does not support it and gives error. Is
there a way to turn off isolation level in workshop? I tried manually edit
weblogic-ejb-jar.xml, however,workshop cannot redeploy it after that.
2. When not using XA, oracle thin driver works fine. But we lost XA
capability.
Any work around?

I did try to change the value in this config file as well, but did not help.
In fact, the installation default setting is with
'<transaction-isolation-level>' commented out.
And when I use bea oracle jdriver, it somehow messed up with database
character set encoding, so our Chinese characters could not be retrieved
correctly. And I try to set the encoding of jdriver to 'GBK', it did not
work.
"Anurag Pareek" <[email protected]> Ð´ÈëÏûÏ¢ÐÂÎÅ
:[email protected]..
Hello Ma,
The transaction isolation level value for EJBs backing the JWS files is
specified in the <transaction-isolation-level> tag in the
WEB-INF/weblogic-jws-config.xml file of a Workshop project. You can
manipulate this value to serve your purpose.
Please do let me know how it goes.
Regards,
Anurag
Workshop Support
"Ma Jie" <[email protected]> wrote in message
news:[email protected]..
We are using simplified chinese, after swith to bea jdriver, it messed
up
all the encoding. So we cannot display Chinese character correctly.
We are using WLS 7.0.1.0, Oracle 9.0.1 on both Windows and Solaris 8
environment, BEA supplied JDK 1.3.1_03.
We have many diffrent problems with oracle drivers:
1. We want to use XA driver to support distributed transaction, However:
* bea jdriver xa messes up with encoding
* when using oracle 901 driver, everything works fince exceptwebservices.
Workshop application access the ejb, then the workshp application sets
isolation level, but oracle driver does not support it and gives error.Is
there a way to turn off isolation level in workshop? I tried manuallyedit
weblogic-ejb-jar.xml, however,workshop cannot redeploy it after that.
2. When not using XA, oracle thin driver works fine. But we lost XA
capability.
Any work around?

Can't start UCM server after new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE

Hi All
After new installation of WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64 bit EE UCM_server1 can’t start. (Please see trace below). WCC 11.1.1.7 run without issues on this environment.
Steps:
1. Installation of jrockit-jdk1.6.0_45-R28.2.7-4.1.0
2. Installation of WLS 10.3.6
3. Installation of WCC 11.1.1.8
4. Schema creation by RCU 11.1.1.8
5. Domain creation by config.cmd with AdminServer, UCM_server1, IBR_server1
6. Run Admin - (success)
7. Run NodeManager (optional) - (success)
8. Run UCM_server1 – failed
Still not works after patching MLR 1 for WCC 11.1.1.8 or upgrade from 11.1.1.7 .
From log files we can saw that problem caused by JniNativeOsUtils.dll file in “<Middleware Home>\Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1”
I replaced JniNativeOsUtils.dll with same file from 11.1.1.7 version and UCM_server1 starts work
I got errors during startup (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can foun them in trace below), but WCC up and works.
I also get error when trying to start SystemProperties or ComponentWithard utility:
Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis.
Any ideas?
Thanks
Leon
ERROR:
javax.servlet.ServletException: Could not start up IDC server deployment.
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1268)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.io.IOException: csServletFailedToFullyInitialize
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException:
at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.data.DataException: !Install aborted.
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !csInitSecurityError
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: intradoc.common.ServiceException: !syFileUtilsUnableToCreateSpecifiedDir,C:/Oracle/MIDDLE~1/USER_P~1/domains/WCC_DO~1/ucm/cs/config/private
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1259)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.AssertionError: !syNativeOsUtilsNotLoaded
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)
at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:360)
at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:28)
at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)
at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)
at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)
at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)
at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)
at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)
at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)
at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)
at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)
at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)
at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
at idcservlet.ServletUtils.initializeContentServer(ServletUtils.java:1257)
at idcservlet.ServletUtils.startAndConfigureServer(ServletUtils.java:531)
at idcservlet.ServletUtils.initializeAllServers(ServletUtils.java:460)
at idcservlet.IdcFilter.initContentServer(IdcFilter.java:181)
at idcservlet.IdcFilter.init(IdcFilter.java:156)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Hi All
Cause of the problems was the missing of "Visual C++ 2005 SP1 Redistributable Package"
Environment works fine after installation of both versions (x86 and x64)
Thanks
Leon

Installing Oracle JDK 7 on Solaris Server

Hello Experts,
I would like to install Oracle JDK 7 on my server. It currently has JDK 6 installed. I would appreciate any pointers that you could provide.
Version
I am running SunOS 5.11. I assume this is Solaris 11. The command uname -a returns: SunOS [omitted] 5.11 [omitted] i86pc i386 i86pc Solaris
My steps so far
My limited progress so far is simply downloading the JDK 7 tar.gz file and extracting in the appropriate location. This is as far as I have gotten.
My Goal
Ultimately, I would like to get several Java Frameworks running including Spring and Hibernate so I can run Java Web Applications.
My Question
So finally, I believe I understand that I should not replace Java 6 with Java 7. I simply have them in separate directories. Currently I have them in "/opt/local/etc/java/sun6/" and "/opt/local/etc/java/sun7/".
For the Web Server, I have chosen Glassfish open community edition. Are there any configuration files that I need to update to reflect the new Java 7 JDK? Please excuse my ignorance. I would say right now I need insight and to be pointed in the right direction. Not so much of instructional how tos...
Thank you, Gregg

Thanks for correcting my forum location.
I believe i may be on the right track for what I am looking for. At this time I would like to put question on hold.
http://docs.oracle.com/javase/tutorial/essential/environment/paths.html
http://www.java.com/en/download/help/path.xml
Update: I was able to get it working. I didnt (and still do not) understand what would happen if installing a second JDK. Specifically I was concerned about implications of any other software that was dependent on Java6. I simply added JDK7 to the PATH variable. Then checking the version using "which java" returns Java7. All seems to be well. I am trying my best to prevent issues that I cannot foresee due to lack of experience in Linux.
Thanks for reading.
http://glassfish.java.net/docs/3.1.2/quick-start-guide.pdf
http://glassfish.java.net/docs/3.1.2/installation-guide.pdf
Edited by: Gregg on May 15, 2012 10:08 AM
Edited by: Gregg on May 16, 2012 8:51 AM

Error while registering a new WSRP provider in Oracle portal

Hi,
I'm trying to add a new provider to the portal repository by registering a new WSRP provider in Oracle Portal. I'm getting the following error:
An error occurred when attempting to call the providers register function. (WWC-43134)
An error occurred during the call to the WSRP Provider: java.rmi.RemoteException: Runtime exception; nested exception is:
deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.encoding.DeserializationException: deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
com.sun.xml.rpc.streaming.XMLReaderException: XML parsing error: com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
Java stack trace from root exception:
com.sun.xml.rpc.sp.ParseException:1: com.sun.xml.rpc.sp/Illegal Namespace prefix: xml
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2015)
at com.sun.xml.rpc.sp.Parser2.fatal(Parser2.java:2000)
at com.sun.xml.rpc.sp.Parser2.processStartElement(Parser2.java:2794)
at com.sun.xml.rpc.sp.Parser2.parseContent(Parser2.java:3036)
at com.sun.xml.rpc.sp.Parser2.parse(Parser2.java:2360)
at com.sun.xml.rpc.streaming.XMLReaderImpl.next(XMLReaderImpl.java:105)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextContent(XMLReaderBase.java:23)
at com.sun.xml.rpc.streaming.XMLReaderBase.nextElementContent(XMLReaderBase.java:41)
at oracle.webdb.wsrp.PortletDescription_LiteralSerializer.doDeserialize(PortletDescription_LiteralSerializer.java:94)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(LiteralObjectSerializerBase.java:174)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(LiteralObjectSerializerBase.java:84)
at oracle.webdb.wsrp.ServiceDescription_LiteralSerializer.doDeserialize(ServiceDescription_LiteralSerializer.java:88)
at com.sun.xml.rpc.encoding.literal.LiteralObjectSeria (WWC-43273)
Please help.
Regards,
Arunthomas
Edited by: 845949 on Mar 21, 2011 2:57 AM

what is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL

ASM installation failure from Oracle GRID under Windows 7 64 bit

I am a rookie..I am running Oracle database 11gR2 running on a Windows 7 64 bit system.
I am implementing ASM onto my system solely for learning purposes
The implementation of ASM has changed between database releases 11gR1 and 11gR2 such that it is no longer configured locally but is now implemented from within Oracle GRID. Unfortunately, the book I am using to study my OCP from was written at the time of 11gR1 so I can no longer follow its instructions to create and configure ASM. Instead of using DBCA I now need to use ASMCA to configure ASM.
As a preliminary requirement I successfully installed Oracle Grid and configured it to run on my standalone server.
I created two partitions on my harddrive ...... drive G: and drive H: with intent of using them as my ASM disks. 45 Gig and 50 gig in size respectively formatted with the NTFS filesystem.
I ran ASMCA in an attempt to create an ASM instance
I specified these partition drives '\\.\G:' and '\\.\H:' in the disk discovery path which were successfully picked up.
However when ASMCA executed the creation process after some time it failed with the following message:
One or more diskgroup(s) creation failed as below:
DiskGroup mydisks creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Check C:\app\peter\cfgtoollogs\asmca\asmca-12101712AM0558.log for details.
Which I did and found many things
Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Oradim Command : C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logEntry:113] Entering oracle.sysman.assistants.usmca.util.UsmcaUtil Method : executeCommand
[Thread-40] [ 2012-10-17 00:25:05.723 EST ] [UsmcaLogger.logInfo:141] Command: C:\app\11.2.0\grid\bin\oradim.exe -new -asmsid +ASM -startmode manual -srvcstart demand -spfile
[Thread-40] [ 2012-10-17 00:25:07.254 EST ] [UsmcaLogger.logInfo:141] Instance created.
Ok. As above the ASM instance appeared to have been successfully created so as part of my investigative process to confirm what the script actually did successfully execute I attempted to log into the ASM instance to see how far it would get. It fails with the following result
C:\Windows\system32>set ORACLE_SID=+ASM
C:\Windows\system32>sqlplus sys as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 17 10:16:36 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I checked Windows Task Manager
There is an OracleOHService and it is running
LISTENER is running ie the local listener running on port 1521 that was originally created with a previous basic stand alone installation of the Oracle 11gR2 database . (ie before I installed Oracle GRID). No other listeners are running.
Can t see any evidence of any ASM service on Windows Task manager started/stopped or otherwise. Neither can I see evidence of a CSS service.
The log file that was generated is large I am not clear on what I should be looking for in order to find clues as to how I might manually resolve this problem and possibly 'salvage' the installation. Any advice would be appreciated.

Hi,
read the documentation:
http://www.oracle.com/pls/db112/to_pdf?pathname=install.112/e24169.pdf
and you will find multiple errors, you probably did.
Especially the part on preparing storage.
Regards
Sebastian

I need to add a new node to RAC Oracle 10g R2

I need to add a new node to RAC Oracle 10g R2.
what is the best mode.
cloning or step by step?
SO: Solaris 64bit
Message was edited by:
ACS

Hi All,
I get the following error eventhough I have followed the instruction for Solaris R2. The instruction is enclosed. Please Advise! Thanks.
/app/cluvfy/runcluvfy.sh stage -post hwos -n nod1 -verbose
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Post-check for hardware and operating system setup was unsuccessful on all the nodes.
=========================
1. Log in as the oracle user.
2. If necessary, create the .sshdirectory in the oracle user’s home directory and
set the correct permissions on it:
$ mkdir ~/.ssh
$ chmod 700 ~/.ssh
3. Enter the following commands to generate an RSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t rsa
At the prompts:
¦ Accept the default location for the key file.
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password.
This command writes the public key to the ~/.ssh/id_rsa.pub file and the
private key to the ~/.ssh/id_rsafile. Never distribute the private key to anyone.
4. Enter the following commands to generate a DSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t dsa
At the prompts:
¦ Accept the default location for the key file
Pre-Installation Tasks 2-11
Creating Required Operating System Groups and User
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password
This command writes the public key to the ~/.ssh/id_dsa.pub file and the
private key to the ~/.ssh/id_dsa file. Never distribute the private key to
anyone.
Add keys to an authorized key file: Complete the following steps:
1. On the local node, determine if you have an authorized key file
(~/.ssh/authorized_keys). If the authorized key file already exists, then
proceed to step 2. Otherwise, enter the following commands:
$ touch ~/.ssh/authorized_keys
$ cd ~/.ssh
$ ls
You should see the id_dsa.pub and id_rsa.pubkeys that you have created.
2. Using SSH, copy the contents of the ~/.ssh/id_rsa.puband
~/.ssh/id_dsa.pubfiles to the file ~/.ssh/authorized_keys, and provide
the Oracle user password as prompted. This process is illustrated in the following
syntax example with a two-node cluster, with nodes node1 and node2, where the
Oracle user path is /home/oracle:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node1’s password:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_dsa.pub >>
authorized_keys
oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node2’s password:
[oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_dsa.pub
authorized_keysoracle@node2’s password:
Note: Repeat this process for each node in the cluster

Problems with new installation of iAS on Windows

This is a new installation of iAS 10.1.2.0.2 on Windows. The application server doesn't come up properly after reboot. The log file D:\Oracle\ora101_infra\opmn\logs\OC4J~OC4J_SECURITY~default_island~1 contains an error stack that begins with:
SSO: DB Error. Please make sure the database is available and restart SSO Server
Obviously, the database (service name OracleServiceIAS472F) is started after the rest of the services (service names similar to Oracleora101_XXX). I have found documentation on how to make the ProcessManager service of the OracleAS Infrastructure before it starts up the ProcessManager service of the middle tier, but no notes on starting the database service in an order different from Windows default. Extensive googling doesn't give me that others have had similar problems. I would like to verify before starting to mess around with the order of services starting at boot time.
The person doing the installation (I don't have direct access to the machine) maintains that installation of WebUtil is causing these problems, and that the problems disappear if he reverts the configuration of WebUtil. I have limited experience with forms configuration and cannot see the connection.
Any input would be greatly appreciated!
Regards,
Maria

Maria, we have numerous installations of both 10gDB 10.1.0.5/10gAS 9.0.4.2 and 10gDB 10.2.0.3/10gAS 10.1.2.0.2 here. The environments are all two server configurations: 1 server has DB + AS Infrastructure, 1 server has AS Middle Tier. I have not had an issue with a DB server reboot causing the Infrastructure to not come up, although we have a strict rule of always rebooting these two servers in pairs: first DB then AS Middle Tier. And since there are gazillion MS patches, they do get rebooted frequently. Regards, John

Installation guide of oracle AS 10g for solaris 10

Dear all,
Anyone can send me the installation guide of Oracle Application server 10g R(2) for Sun Sparc Solaris 10. Short hands-on document will be very helpful for me to install ASAP.
Thanks,
Saqib

quick install guide:
http://download-west.oracle.com/docs/cd/B14100_14/quickinstall.1012/quickinstall/toc.htm
install guide:
http://download-west.oracle.com/docs/cd/B14100_14/install.1012/install/toc.htm

Venezuela new currency VEF support in JDK 1.4.2

Hi,
Is there any plan to support new Venezuela's new currency code (VEF) in JDK 1.4.2 which is getting in effect from 1 Jan, 2008 ? Currently, jdk 1.4.2, 1.5 & 1.6 update 3 shows VEB even for future date.
Following code returns VEB (old currency code) even for future dates in 2008:
import java.util.*;
public class Curr {
public static void main(String[] args) {
System.out.println(Currency.getInstance(new Locale("es", "VE", "")));
I tried with following JDKs, all of them returns VEB:
- Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
- Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
- Java(TM) SE Runtime Environment (build 1.6.0_03-b05)
Our application (financial) with java/j2ee front-end uses JDK 1.4.2.13 and its going global in Jan 2008 including Venezuela. Please advise! If no patches, any workarounds will be great..
Thanks!
-Vinod

Thanks Naoto!
I tried to search for 1.4.2_17 (b02) to download and test, but i can't find it. The latest version available in 1.4.2 branch is 1.4.2_16 (http://java.sun.com/j2se/1.4.2/download.html).
Can you please point me to a url from where i can download this ?
Thanks!
-Vinod

Essbase 11.1.2.1 New Installation- Cannot configure Essbase Server

Hi,
After uninstalling EPM-System 11.1.2.0 and clearing the registries as much as I could; I tried to install Essbase Server 11.1.2.1 on a Windows 2008-R2 64bit platform. The installation went smoothly and I could configure the Hyperion Foundation tools.
However on the Epm-Configurator, "Configure Essbase Server" section appears read only. Therefore I could not configure the Essbase server. I also cannot start the Oracle Process Manager service as the file OPMN service path directs, does not exist in the directory. In fact I seem to have only "Admin" file under the Oracle\Middleware\Ohs
Any idea why I encounter such issue although the installation seems to be succesful?
Thanks.
Edited by: 857072 on 14.Haz.2011 07:15
Edited by: 857072 on 14.Haz.2011 07:20

I have found the solution following this link : Unable to configure Essbase on new installation
I don't know exactly what did the trick but here are the changes I made before it worked:
- I have changed the total paging file size
- Extracted the Additional Content again
- To install, I chose the Run as Administrator option.
- First I installed and configured only Foundation Services, later I installed the other components.

New installation of ws7u2 on solaris10 amd dumping core

I'm having a problem with brand new installations of ws7u2 on solaris10 amd 64bit. After a fresh installation, I simply try to access the admin server URL and get connection reset errors. Looking at the file system I see core files being written into admin-server/config and the log files show processes constantly crashing? and restarting:
[22/Apr/2008:17:36:43] info (27271): CORE3050: Spawning replacement for worker process 27298
[22/Apr/2008:17:36:43] info (27306): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[22/Apr/2008:17:36:45] info (27306): WEB0100: Loading web module in virtual server [admin-server] at [admingui]
[22/Apr/2008:17:36:45] info (27306): WEB0100: Loading web module in virtual server [admin-server] at [jmxconnector]
[22/Apr/2008:17:36:48] info (27306): HTTP3072: admin-ssl-port: https://web01.internal.lan:8989 ready to accept requests
[22/Apr/2008:17:36:48] info (27306): CORE3274: successful server startup
[22/Apr/2008:17:37:13] info (27271): CORE3050: Spawning replacement for worker process 27306
[22/Apr/2008:17:37:14] info (27318): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[22/Apr/2008:17:37:16] info (27318): WEB0100: Loading web module in virtual server [admin-server] at [admingui]
[22/Apr/2008:17:37:16] info (27318): WEB0100: Loading web module in virtual server [admin-server] at [jmxconnector]
[22/Apr/2008:17:37:19] info (27318): HTTP3072: admin-ssl-port: https://web01.internal.lan:8989 ready to accept requests
[22/Apr/2008:17:37:19] info (27318): CORE3274: successful server startup
[22/Apr/2008:17:37:45] info (27271): CORE3050: Spawning replacement for worker process 27318
[22/Apr/2008:17:37:45] info (27325): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[22/Apr/2008:17:37:47] info (27325): WEB0100: Loading web module in virtual server [admin-server] at [admingui]
[22/Apr/2008:17:37:47] info (27325): WEB0100: Loading web module in virtual server [admin-server] at [jmxconnector]
[22/Apr/2008:17:37:50] info (27325): HTTP3072: admin-ssl-port: https://web01.internal.lan:8989 ready to accept requests
[22/Apr/2008:17:37:50] info (27325): CORE3274: successful server startup
[22/Apr/2008:17:38:16] info (27271): CORE3050: Spawning replacement for worker process 27325
[22/Apr/2008:17:38:16] info (27335): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[22/Apr/2008:17:38:18] info (27335): WEB0100: Loading web module in virtual server [admin-server] at [admingui]
[22/Apr/2008:17:38:18] info (27335): WEB0100: Loading web module in virtual server [admin-server] at [jmxconnector]
Any clues? This is a brand new installation of sol10u5 on a 64bit amd machines. What can I do to trouble shoot this?
Thanks!
- Phillip

Yep, I have all the latest patches, including the ones specified in the release notes.
The following is the mdb output pasted:
$ mdb ~/webserver7/admin-server/config/core
mdb: core file data for mapping at 7848000 not saved: Bad address
Loading modules: [ libumem.so.1 libc.so.1 libuutil.so.1 ld.so.1 ]
::stackld.so.1`hwcap_check+0x34(e066bb30, fc9e0000)
ld.so.1`elf_are_u+0xaf(e066bb30)
ld.so.1`are_u_this+0xdf(e066bb30, 26, e066b5d0, fce80498)
ld.so.1`file_open+0x2d8(0, feffb28c, fce80498, fce80498, fd330bd8, 40000000)
ld.so.1`find_path+0x13b(feffb28c, fce80498, fd330bd8, 40000000, e066bc18, e066bb30)
ld.so.1`load_so+0xfe(feffb28c, 1c, fce80498, fd330bd8, 40000000, e066bc18)
ld.so.1`_load_path+0x18d(feffb28c, 1c, fce804d8, fd330bd8, c01, 40000000)
ld.so.1`load_path+0xa5(feffb28c, 1c, fce804d8, fd330bd8, c01, 40000000)
ld.so.1`load_one+0x6a(feffb28c, 1c, fce804d8, fd330bd8, c01, 40000000)
ld.so.1`dlmopen_core+0x109(feffb28c, 823e778, c01, fd330bd8, 0, 8000)
ld.so.1`dlmopen_intn+0xd1(feffb28c, 823e778, c01, fd330bd8, 0, 0)
ld.so.1`dlmopen_check+0xc6(feffb28c, 823e778, c01, fd330bd8, e066bd88)
ld.so.1`dlopen+0x48(823e778, 1)
libjvm.so`__1cCosIdll_load6Fpkcpci_pv_+0x20(823e778, e066be0c, 400)
libjvm.so`JVM_LoadLibrary+0xec(823e778)
libjava.so`Java_java_lang_ClassLoader_00024NativeLibrary_load+0xc9(9772448, e066c784, e066c780, e066c754, 0, e066c784)
0xf5c0841a(0, f5c06399, e20f0a50, e20f0cc8, 9, e37b3d30)
0xf5c02b6b(0, 0, 0, 0, e20f0cc8, 0)
0xf5c02a13(e20f04e8, 0, e3798e40, 0, f2660e88, f26525e0)
0xf5c02b6b(0, f2660e88, f26525e0, e37b2f48, e066c870, f1a1f8e7)
0xf5c02b6b(f2660e88, e066c898, f2652400, e066c8b8, f2660368, 0)
0xf5c02b6b(1f80, fc7fa000, 9772388, 0, e066c96c, fc340337)
0xf5c00231(e066c918, e066ca28, a, f2652410, f5c074c0, e066c9cc)
libjvm.so`__1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x187(e066ca24, e066c9b0
, e066c9c8, 9772388, e066c9a4, fc340638)
libjvm.so`__1cCosUos_exception_wrapper6FpFpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v2468_v_+0x14(fc3401b0
, e066ca24, e066c9b0, e066c9c8, 9772388)
libjvm.so`__1cJJavaCallsEcall6FpnJJavaValue_nMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x28(e066ca24, 9ec9224, e066c9c8
, 9772388)
libjvm.so`__1cNinstanceKlassbBcall_class_initializer_impl6FnTinstanceKlassHandle_pnGThread__v_+0xaa(9ec9220, 9772388)
libjvm.so`__1cNinstanceKlassWcall_class_initializer6MpnGThread__v_+0x58(f2652460, 9772388)
libjvm.so`__1cNinstanceKlassPinitialize_impl6FnTinstanceKlassHandle_pnGThread__v_+0x309(96840c0, 9772388)
libjvm.so`__1cNinstanceKlassKinitialize6MpnGThread__v_+0x78(f2652460, 9772388)
libjvm.so`__1cSInterpreterRuntimeE_new6FpnKJavaThread_pnTconstantPoolOopDesc_i_v_+0xfb(9772388, f262d050, b, f5c10272,
e066cbb0, f262d81e)
0xf5c10299(e20bb9c8, e066cbd8, f22fbb55, e066cbfc, f23003d0, 0)
0xf5c02b6b(0, e066cc00, f213b06c, e066cc34, f213ce20, 0)
0xf5c02b6b(0, 0, e37d5150, e20b8548, e37d5148, e066cc38)
0xf5c02e71(0, 0, 0, e20b8548, 0, 2)
0xf5c02b6b(e37b1830, e37d5178, e066cca4, f1f3d1e9, e066ccd8, f1f3d8e8)
0xf5c02b6b(e37d5178, e20b8530, e3798e40, e37b1830, e37d4ed8, e066ccdc)
0xf5c02e71(e37d4ed8, 5, e3798840, 1f80, fc7fa000, 9772388)
0xf5c00231(e066cd68, e066cf18, a, f1bc6cc8, f5c074c0, e066ce3c)
libjvm.so`__1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x187(e066cf14, e066ce00
, e066ce38, 9772388, e066cdf4, fc340638)
libjvm.so`__1cCosUos_exception_wrapper6FpFpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v2468_v_+0x14(fc3401b0
, e066cf14, e066ce00, e066ce38, 9772388)
libjvm.so`__1cJJavaCallsEcall6FpnJJavaValue_nMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x28(e066cf14, 9684058, e066ce38
, 9772388)
libjvm.so`__1cUjni_invoke_nonstatic6FpnHJNIEnv__pnJJavaValue_pnI_jobject_nLJNICallType_pnK_jmethodID_pnSJNI_ArgumentPusher_pnG
Thread__v_+0x2d3(9772448, e066cf14, 8923454, 1, 823aab1, e066cf20)
libjvm.so`jni_CallVoidMethodV+0x153(9772448, 8923454, 823aab1, e066cf74)
libj2eeplugin.so`__1cHJNIEnv_OCallVoidMethod6MpnI_jobject_pnK_jmethodID_E_v_+0x22(9772448, 8923454, 823aab1)
libj2eeplugin.so`__1cLNSAPIRunnerHonReady6F_v_+0x3f(fe5f2bf4, fd462280, e066cfd8, e066cfd8, fe5daa51, 0)
libj2eeplugin.so`isready_thread+0x53(0)
libnspr4.so`_pt_root+0xd1(8275398)
libc.so.1`_thr_setup+0x4e(fcbcba00)
libc.so.1`_lwp_start(fcbcba00, 0, 0, e066cff8, fd433d70, fcbcba00)
::quitDoes that shed any light?

Basic installation: X11 for Oracle Linux 6.3

Hi All,
I created Oracle VM and installed Linux 6.3 as operation system. First try with X Windows and X11 shows, that I can not start X-Appse.g. xclock --> command not found!
How can I correct install oderwise configure X11 for Oracle Linux 6.3
Regards,
Moh

I guess Oracle VM VirtualBox and Oracle VM can be misleading. Oracle should better call it Oracle Virtualbox, without VM in the name. Fyi: http://www.oracle.com/us/technologies/virtualization/oraclevm/index.html
Anyway, a default installation of Oracle Linux or RHEL 6 does not install the X Window system and a graphical user desktop. If you want to run X11 applications you have 2 options:
- Use remote access from a system that has X Window server installed
- Install X Window and a window manager on your virtual machine.
If this is a new installation and you use it locally then I suggest to re-install the system and customize the package selection. You should see a prompt "customize now" during the installation where you can select the Desktop packages.

Windows 7,new installation, images folder path configuration problem

Hello all,
I am having a difficult time getting images folder (or possibly loaded images) to perform correctly on a new installation.
When apex starts up, the page has no visual objects rendered. Here's a portion of the page's source:
h1. Sample rendered page segment
<!DOCTYPE html>
<html lang="en" xmlns="http://www.w3.org/1999/xhtml" xmlns:htmldb="http://htmldb.oracle.com" xmlns:apex="http://apex.oracle.com">
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" />
<title>Application Express Login</title>
<link rel="icon" href="C:\Users\violin\Documents\OracleDownloads\apex_4.1_en\apex\imagesfavicon.ico" type="image/x-icon" />
<link rel="shortcut icon" href="C:\Users\violin\Documents\OracleDownloads\apex_4.1_en\apex\imagesfavicon.ico" type="image/x-icon" />
<link rel="stylesheet" href="C:\Users\violin\Documents\OracleDownloads\apex_4.1_en\apex\imagescss/apex_4_1.min.css" type="text/css" />
You can see the html is being rendered, but incorrectly. In the excerpt, the images path is incorrect.
h3. As it appears in the rendered page
<link rel="icon" href="C:\Users\violin\Documents\OracleDownloads\apex_4.1_en\apex\imagesfavicon.ico" type="image/x-icon" />
h3. As it should appear (manually corrected image path)
<link rel="icon" href="C:\Users\violin\Documents\OracleDownloads\apex_4.1_en\apex\images/favicon.ico" type="image/x-icon" />
I'm not sure whether the folder path is (forward|backward)(single|double) slash delimited.
h1. Listener script
I've started the listener with and without the apex.images parameter. I commented out the "plain version." Here's my listener startup script:
@echo on
cls
set oracle_sid=xe
set localcd=%cd%
cd C:\Users\violin\Oracle\apex_listener.1.1.3.243.11.40
rem java -jar apex.war
java -Dapex.images=C:\Users\violin\Oracle\apex_4.1_en\apex\apex\images\ -jar apex.war
h1. Troubleshooting
I've tried a number of corrections including rerunning apex_epg_config.sql, apexldimg.sql, adding an apex.images parameter to listener startup (just a shot in the dark), deleting and recreating apex.properties, adding and removing trailing /'s, \'s, //'s, \\'s, etc. I didn't have success with any of these approaches, so it may have been cumulative changes that resulted in the problem. I just list them as having tried (at least once).
h1. Environment
Windows 7
Firefox 11.0
apex 4.1 English
Thank you for taking the time to respond.

Hello Jeff E,
Thank you for quick reply.
Yes, I did specify a full path rather than /i/. I think I had originally started with /i/ but didn't understand where /i/ maps to a folder path, so I reinstalled and specified the path with similar results.
I'll test reset_image_prefix.sql and post results.
I'm confused about the EPSQL gateway v. APEX listener. I just tried to follow the documentation which offered multiple options. I am not familiar with either of them, so I can't defend a choice.
Thank you.
Albert

WLS new installation SUN or Oracle JDK?

Similar Messages

Maybe you are looking for