Wmii: plan9 installed, but no 'read' command

I get the xmessage window from wmii-3.6 saying I have a plan9 installation, but there is no 'read' command.
I searched for an answer, but I couldn't find anything.  Does anybody here have the same problem, or know
how to fix it?

You need to have /usr/local/plan9/bin or equivalent in your PATH.

Similar Messages

  • Adobe Acrobat 9 installed but cannot read any PDF file from a Browser window

    I have a new(-ish) PC running Vista and had Adobe Acrobat v9 installed.  However I cannot open PDF files when trying to view from a Browser on a web site.  IE8, Firefox and Chrome all produce the same error that claims I need to install Adobe 8 or 9.  Have searched "Manage add-ons" and found Adobe enabled.  Have hunted around but cannot seem to find a way to fix this.  Any ideas?  This seems so fundamental that it is difficult to believe that (a) it happened in the first place and (b) that there is not an obvious way to fix it!

    Are you on a PC with a profile setup?
    Assuming you are,
    Rename your profile to something like PROFILE.OLD and then relog into the PC.  If the PDF's open without issue, you can remove the Abode folders in the old profile under Documents and Settings\%profile%\Application Data and Local Settings\Application Data.
    Rename the new profile to yet something else like PROFILE.NEWOLD.   Then rename your PROFILE.OLD to its original name.  Confirm that you have removed the above folders from this existing profile.   Perform MIGWIZ I.E. Export files and settings to a folder. Now rename the profiles so that the .NEWOLD is the active profile and run migwiz there - bringing in your old settings.  These steps are only needed if you wish to preserve all the data and settings from your old profile.
    Hope this helps!

  • RXTX installed, but cannot read input (linux)

    I have RXTX properly installed on my Linux box and can compile and run the sample programs. I ran the SimpleWrite on ttyS0 and the SimpleRead on ttyS1.
    I've run cat /proc/tty/driver/serial and can see that the SimpleWrite appears to have written all the bytes to ttyS0, but ttyS1 only receives 1 byte. I added some code to see what that byte was, but it was unprintable (maybe -1?).
    I have a null modem cable between the two serial ports. I am running the programs on the same computer.
    I'm not sure what other information I can give to help solve this problem. Let me know and I'll post it.
    Thanks,
    -tl

    More information
    My friend came over with a DOS serial communication program. We ran it on two WIN98 computers and it worked.
    Now I am running my code on a Linux machine using java and sending to a Win98 machine using that DOS program.
    If I send it 0x00 - 0x0F the DOS program registers 255 / 0xFF
    If I send it 0x10 - 0x1F it doesn't respond
    0x20 - 0x2F gives me 0xFF
    0x30 - 0x3F does not respond
    etc
    Apparently if the 5th bit is 1 it doesn't respond, if it is 0 it records a 0xFF.
    What does it mean? Is it a linux -> DOS thing? Is it a unicode thing? Is it a crazy serial port thing? I don't know.
    The code, pretty much straight from Sun
    import java.io.*;
    import java.util.*;
    import gnu.io.*;
    public class SW1 {
        static Enumeration portList;
        static CommPortIdentifier portId;
        static SerialPort serialPort;
        static OutputStream outputStream;
        public static void main(String[] args) {
            portList = CommPortIdentifier.getPortIdentifiers();
            while (portList.hasMoreElements()) {
                portId = (CommPortIdentifier) portList.nextElement();
                if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) {
                    // if (portId.getName().equals("COM1")) {
                    if (portId.getName().equals("/dev/ttyS0")) {
                        try {
                            serialPort = (SerialPort)
                                portId.open("SimpleWriteApp", 2000);
                        } catch (PortInUseException e) {}
                        try {
                            outputStream = serialPort.getOutputStream();
                        } catch (IOException e) {}
                        try {
                            serialPort.setSerialPortParams(9600,
                                SerialPort.DATABITS_8,
                                SerialPort.STOPBITS_1,
                                SerialPort.PARITY_NONE);
                        } catch (UnsupportedCommOperationException e) {}
                        try {
                            outputStream.write((byte)0x00);
                        catch (IOException e) {
                            System.out.println("Error sending..."+e.getMessage());

  • I installed Itunes on my Vista, but error reads that there was no Apple Application Support installed and Itunes needs this in order to run

    I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows;
    "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Windows error 2)"
    I will appreciate any help. Thanks

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

    Adobe Reader 10.1/ 11 get error "has stopped working" on windows 7 after installed 1 or 2 days, but Adobe Reader is fine==

    Turning off the Protected Mode at Startup setting fixed the problem for me. Switched off all protected mode settings in Preferences exited Adobe Reader XI then restarted. Now I can successfully open files without the program crashing. I run the same versions of Adobe Reader and Norton Internet Security on Windows 7 and Windows 8 systems and the problem only occurred on Windows 7.

  • How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

    How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

    Anubha,
    It worked! Thank you so much.
    I'd opened file with the 'Open with' feature then clicking Adobe Reader,
    but that didn't do it. When I used 'Open with', then 'Choose default
    program...', it worked like a charm.
    Again, thank you!
    Jonathan
    On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

  • When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

  • Adobe reader installed but not recognised

    Adobe reader says it was successfully installed but every time an internet site requires it, it says it cannot be detected and an 'Adobe Reader 8.2 or later needs to be installed'. I have installed about 6 times now and it never works! I have a mac version 10.6.8. Please help me, I am so frustrated.

    I had a similar problem just now and what worked for me was i archived a email in MS outlook using the Adopbe PDF dropdown menu and then I had full access to X Pro again.
    Hope that this helps

  • I HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

    i HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

    This could be the problem/solution: http://support.microsoft.com/kb/2716529

  • I have a new hp tower running windows 8.1 and have been trying to install the adobe reader.  The installer downloads (1meg) and I choose to run it but it just sits with an empty screen.  I've checked task manager and it takes up memory but does nothing.

    I have a new hp tower running windows 8.1 and have been trying to install the adobe reader.  The installer downloads (1meg) and I choose to run it but it just sits with an empty screen.  I've checked task manager and it takes up memory but does nothing.  After letting it run for 3-4 minutes I kill the task.  What can I do to get the reader installed on this machine?  I've tried using chrome, firefox and explorer and get the same results with each.

    Try the offline installer from http://get.adobe.com/reader/enterprise/

  • Adobe reader updater is ready to install but won't -- need help

    adobe reader  updater is ready to install but gets stuck on step 2 -- need help

    It's OK.  I finally got Reader XI installed.  But once installed, the program would then lock up and show an error message whenever I tried  to open any of my existing PDF docs.  So I finally just gave up and deleted Reader XI from my system.  Fortunately, my existing version of Reader seems to work just fine.  Maybe I'll try again later after Adobe has worked out the kinks with Reader XI.  But thanks anyway for responding--no further help needed now.  I'm out.

  • Adobe Reader Updater is ready to install, but won't install -- what is the problem?

    Adobe Reader Updater is ready to install, but won't install -- what is the problem?

    what is the problem?
    Well, you're not telling us anything, that's the problem. No offense, but really, just saying that something doesn't work is not gonna yield any answers that would help. We wil lat least need a tiny bit of info about your system - operating system, possibly hardware specs, definitely info about security tools and otehr Adobe software...
    Mylenium

  • Help adobe reader listed as installed but can not open file

    I need to open a file from email. It says adobe reader not installed but it shows it is installed when I look in control panel. Thanks for any help you can shre..

    1.Which OS you are using?
    2.What version of Reader is shown in in control panel?
    Just try re installing Reader from Adobe website and report any issue you face during installation.

  • I have a Leopard DL disk & bought an external CD drive, but I read that I can't install through USB?

    I also have a Leopard DL disk and having the same problem with my eMac. I bought an external CD drive, but I read that I can't install through USB. Why is that? Would a USB A female to FireWire IEEE 1394 6P converter work? Or do I have to buy another CD drive with a FireWire? Please help.
    PS
    Can you also please explain how to boot from an external drive? (CD drive and storage device). Is there even a way to save the disks content to an external memory device and install it from there?
    Message was edited by: Edz2
    <Re-Titled By Host>

    Hi,
    Very few PPC Macs can boot from USB, most require Firewire... BUT, all 3 of my eMacs can & do boot from USB, try holding the alt or option key at bootup.
    A USB<->FW converter will not work.

  • I have adobe reader installed but it does not work

    I have adobe reader installed but it does not work

    What is your operating system?  Reader version?
    What does "not work" mean?

Maybe you are looking for