Worker threads count is not updating?

Hello All,
I have increased the worker threads in PI7.3 (Send.maxConsumers and Call.maxConsumers) and restarted the XI AF Core service (tried the same from config tool as well), but when i am checking the number of threads under PIMON -> Engine status i can still see the default values over there (for instance 5 ).
Not sure what exactly i am missing out?
(name=global, messageListener=localejbs/AFWListener, exceptionListener=localejbs/AFWListener, pollInterval=60000,
pollAttempts=60, Send.maxConsumers=20, Recv.maxConsumers=5, Call.maxConsumers=20, Rqst.maxConsumers=5)
Thanks
Amit Srivastava

Hi Amit,
The values you've mentioned are totally correct. There is nothing missing value wise, for your confirmation.
Ideally, you should see all the <Adapter>_http://sap.com/xi/XI/SystemCall and <Adapter>_http://sap.com/xi/XI/SystemRqst queues with max thread 20 in PIMON.
If you've the flexibility, then you can try updating any specific adapter thread (e.g. SOAP_http://sap.com/xi/XI/SystemCall) to 20 and see if that alone gets reflected or not in pimon. If not, you might have to contact Basis/SAP to dig deeper as everything looks fine. It would be interesting to know the resolution if you get one.
Regards,
Abhishek

Similar Messages

  • Locker failed to offer due to timeout.Please increase worker thread count by increasing DeferredWorkerThreadCount in mediator-config.xml

    Can some one please assist me to get rid of the below error when trying to bring up the SOA services in Weblogic?
    "Locker failed to offer due to timeout.Please increase worker thread count by increasing DeferredWorkerThreadCount in mediator-config.xml"
    We tested the agent, node manager and everything seems to be working fine. Its persistent in UAT environment which is a clustered environment. 1st managed server for SOA is having the issue while the second one is working fine. Below are the list of manages servers in the env:
    2 managed servers for ADF,
    2 managed servers for BAM,
    2 managed servers for SOA,
    2 managed servers for WSM.
    The affected SOA1 managed server was working fine till last week and there were no changes made to the environment. Please let me know if I can furnish any further info.
    Thanks!
    Nidhi Gangadhar.
    WebLogic PortalSOA Suite

    Can some one please assist me to get rid of the below error when trying to bring up the SOA services in Weblogic?
    "Locker failed to offer due to timeout.Please increase worker thread count by increasing DeferredWorkerThreadCount in mediator-config.xml"
    We tested the agent, node manager and everything seems to be working fine. Its persistent in UAT environment which is a clustered environment. 1st managed server for SOA is having the issue while the second one is working fine. Below are the list of manages servers in the env:
    2 managed servers for ADF,
    2 managed servers for BAM,
    2 managed servers for SOA,
    2 managed servers for WSM.
    The affected SOA1 managed server was working fine till last week and there were no changes made to the environment. Please let me know if I can furnish any further info.
    Thanks!
    Nidhi Gangadhar.
    WebLogic PortalSOA Suite

  • Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

    I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
    So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
    So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
    Any help on this matter will be enormously appreciated
    Thanks in advance

    I have playlists that rely on the Last Skipped and
    Skip Count properties of songs, but these items only
    seem to be triggered if the song is fast forwarded
    between 3-20 seconds into the song. I tried to skip
    I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
    One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

  • ITunes play count does not update when iPod is connected

    iTunes keeps track of how many times i play the song on my computer but does not update when I connect my iPod. Is there a way to fix this??
    thanks!!

    I just checked and it does update for me. I'm still waiting to see if it updates from the AppleTV though.

  • Some videos not working on 60G (did not update).  Hard drive issue?

    Help! My Ipod hates me
    Having big problems with some video files freezing up after anywhere between 30 minutes and some not able to even start. These same files worked fine a few months ago. However some movie files still work fine and all the music files still work.
    When this problem happens it seems like the hard drive is trying to read the file because I can feel the ipod slightly vibrating but sometimes the video stops and sound continues and other times the whole file just stops.
    Things I've tried so far:
    1)restored and reset (multiple times)
    2)reversed the update from 1.1 to 1.0
    3)tried multiple dvd to ipod programs (cucusoft, videora, super ipod, streamclip)
    4)MUX'ed with YAMB
    5)tried different speeds of converting dvd to ipod
    6)bought 1 hour video from itunes which works fine
    7)screamed at and insulted my ipod multiple times. It didn't work but it sure felt good.
    8)these same files seem to work perfectly on a friends brand new 60G ipod.
    9)all movies play perfectly on my desktop with quicktime and itunes.
    Maybe I'm jumping the gun here but I fear this may be a hard drive vs board issue but thought I would see if anyone else has any other suggestions or similar problems.
    Ugh! As I sit here and write this I just reset (not restored) my ipod, and now all the files are gone. CRAP!
    My ipod hates me.
    Help!
    Dell 5100 Windows XP

    I use a Logitech M100 black with my Mac Mini and the wife uses a M110 white with her Early iMac, they work great and you won't find a better mouse for $10.
    Logitech Corded Optical Mouse M100 - Walmart.com
    Logitech Mouse M110 White - USB/PS2 in Sacramento | sacbee.com

  • CiscoWorks LMS - Work Centers- Identity readiness not updating

    Hi,
    I'm using LMS 4.0.1 and i found that identity work center is not woking correctly. Problems detectes:
    1) is not displaying all devices in identity-readiness assessment. On readines pie graph i se only part of devices.
    2) when device is replaces or IOS is updates Work Center is not refreshing at all (weeks).
    I'm looking for a way to troubleshoot this but searching internet resources gives me no hints where to start. If you know what logs can i check, what debug can i enable, or what processes are responsible for readiness job your help will be appreciated.
    Regards,

    Any hints?
    I can't find any piece of configuration where i would be abe to enable DEBUG for Identity Work Center.
    Does anyone know how to verify problems with identity work center?

  • From Work Order Functional area not Updating in MM & FI Documents During GI

    Hi All
    In work order functional area is getting updated in additional data tab from functional location. In functional location we have the work center and this work center is assigned to cost center. In this cost center we maintain the functional area & profit center.
    from there it is updating in the work order. But in MM & FI documents the functional area is showing as blank we are facing this issue for only one work order for other work orders the functional area is updating in MM & FI documents.
    Thanks & Regards
    VIshvesh Saodekar
    Edited by: Vishvesh Saodekar on Nov 8, 2010 12:43 PM

    I have posted thread in PLM forum

  • New apple ID - works for purchases, but not updates

    I recently changed my apple id to a .me account.    It works fine for purchasing.   However when I try to update apps on my iPad or iPhone it still wants a password to my old ID which is no longer accessible.   How can I get the update function to prompt using my new .me account?  

    Hi Taylorfam6,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  You may need to sign out of your Facetime and Message accounts, and sign back in with the correct Apple ID:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
    You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTimeand Settings > Messages > Send & Receive. On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
    Settings > Messages > Send & Receive > You can be reached by iMessage at:
    Settings > FaceTime > You can be reached by FaceTime at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iPhone automatically registers your phone number for use with FaceTime and iMessage during activation.
    To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
    To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
    When you enable FaceTime or iMessage with an iPad or iPod touch, you will need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.
    Cheers,
    - Judy

  • Need Safari  for iTunes Store to work, but Safari will not update properly.

    I recently did all my software updates (as updated as i could be on a Powerbook G4), and as I'm trying to access the iTunes store, I can't. I get the message that the latest Safari update needs to be completed. So I go through the update process again for Safari, and I get the message that I don't have the appropriate access to complete the update package. So, I can't update Safari, therefore I can't get into the iTunes store. Does anyone have a solution??

    this is the Actual message that i get.
    the update "Safari" cannot be saved.
    You do not have appropriate access privileges.
    The Installer package has been moved to the Trash. To try again, open the package from the Finder.

  • Google tells me my version of firefox needs updating. I tried to download it which worked except it did not update my version. operating system is Ubuntu

    I click on update my version of firefox. It appears to download but then does not actually update my version. the operating system is Ubuntu.

    Ubuntu should update firefox for you as part of system updates
    From top left of desktop
    System
    Administration
    Update Manager
    check (button)
    click check button one more time
    Install updates (button)
    enter admin password
    when complete (after reboot if necessary) exec update manager again, check, check, install

  • HT201210 Done everything possible to make it work but still its not updating... Please help, i ruined my whole sunday afternoon to update my ipad2 from ios 4.3 to ios 6. But now its stuck PLEASE HELP

    I am trying to update my iPad 2 from iOS 4.3.2 to iOS 6. but its stuck after 'extracting the software' thing. Its showing error no 3194 PLEASEEEEE HELPPPPPPP

    You've followed the instructions for that error code on the page that you posted from :
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Cfmail not working properly, Log files not updating

    I'm still trying to get this CFmail problem corrected.  The problem is CFmail is only send the mail out sporadically.  In many cases it will send out the mail and still put the message in the undeliverable folder.  My smtp server shows that the connection was opened and closed.
    I'm pretty sure that I'm dealing with a CF problem  since the mail logs are screwing up as well.  In the past when I'd have  a problem with CFmail I could go to my mail.log and see what was  happening.
    Those logs looked like this:
    "Error","scheduler-2","05/28/09","11:00:43",,"Invalid Addresses;    nested exception is:      javax.mail.SendFailedException: 550 No such  user (website_notification) Cached lookup "
    "Error","scheduler-2","05/28/09","11:00:43",,"Invalid Addresses;    nested exception is:      javax.mail.SendFailedException: 550 No such  user (wayneseattle) -ERR [email protected] not found "
    "Error","scheduler-2","05/28/09","11:00:43",,"Invalid Addresses;    nested exception is:      javax.mail.SendFailedException: 550 No such  user (ca-sl-broardmoor) Cached lookup "
    Now my logs look like this:
    "Error","scheduler-2","12/07/09","10:05:36",,""
    "Error","scheduler-4","12/07/09","10:17:22",,""
    "Error","scheduler-0","12/07/09","10:33:37",,""
    "Error","scheduler-0","12/07/09","10:53:53",,""
    Where did the error messages go?  
    Could this be a SMTP response message formating issue?  Any ideas in how  to figure this one out would be very much appreciated.

    Which version of CF are you using? You may have already checked this but under "Server Settings -> Mail -> Mail Logging Settings" there's an option box for "Log all mail messages sent                      by ColdFusion". If you have it unchecked you may not see all of that data.

  • The backup works, but it's not updating afterwards?

    I am trying to update my iphone 4 and am about to throw it out of the window... In itunes, it tells me that in order to update from ios 4.2.9. to ios 7.0.3. I need to back up my phone first and then update. It takes the hour or whatever to back up, and then tells me it's all done and I'm safe to disconnect my phone from my PC. But it NEVER starts the actual update! What is going on? Is there something I am missing or is this Apple's way of getting me to turn this phone in for the new 5S or whatever? ..Seriously thinking of trashing this thing and going out tomorrow for the Samsung Galaxy, LOL. Please help!

    Are you trying to update over the air or through iTunes?

  • Play count not updating - Shuffle 1st gen

    My 1st generation iPod shuffle is not updating the play count or last played fields properly.
    I have tested it with a few tracks manually dragged into the iPod, and it seems to work if I do this. However the play counts do not update if I use Autofill from my smart playlist. And I tried limiting my smart playlist to 950 MB (It's a 1GB shuffle) and dragging the playlist manually. Again the play count does not update.
    This is a pain as I use the smart playlist to pick songs for my iPod and I use play counts in my smart playlist criteria, so it's messed up the way I use my iPod and iTunes.
    (It used to work fine when I had earlier versions of Windows, iTunes and iPod software. I had problems getting iTunes to recognise or sync with the iPod, but updating windows to Service Pack 3 fixed this. But have had this play count problem since. I have up to date versions of iTunes and iPod software.)
    Anyone had a similar problem and managed to fix it?

    I've had this problem too, since the 8.1 release? It had been failing in shuffle mode but not in "not shuffle"/"in order". As of today it failed to update play date/count after playing in the "not shuffle" mode. The songs that were played are untouched, but a like number of other random songs that had not been played show today's date.
    The apparent lack of support for older hardware is really disappointing. It certainly does not motivate me to go out and buy more Apple hardware which they will soon stop supporting.

  • Syncing my iPhone 4 will not update iTunes play counts

    Running a MacBook Pro with OSX Lion 10.7.2 and iTunes 10.5 (141).
    Since upgrading my iPhone 4 to iOS5 - I have noticed that when syncing my phone in iTunes (wired), my 'play counts' do not update for recently played songs, and any songs played on my iPhone do not appear in the 'Recently Played' playlist in iTunes.
    I mange my music manually on my iPhone, so had a go at removing all the music from it, then copying over just one album. Played the first track of that album on my iPhone which had been played 10 times. Synced iPhone, and still says 10 plays in the play count on iTunes.
    Have checked the 'Home Sharing computers and devices update play counts' in the 'Sharing Preferences' in iTunes, but this has no effect.
    Is anyone else experiencing this issue?
    Is it a bug?
    Am I missing something glaringly obvious?

    Dalmanac, I hear you. I record all of my plays to a database, and iOS5 has broken that for me. Quite frustrating.
    I've done a bunch of testing tonight, a bit more thoroughly than I did on the weekend. There are two scenarios where I appear to be able to get the phone to sync plays back the the library.
    Play a song from the iPhone through iTunes:
    1. Connect iPhone.
    2. Play song through iTunes, but from iPhone.
    2.1 iTunes briefly says "updating files on phone" or something such
    2.2 iPhone count increases (viewable in iTunes)
    3. Click on Music Library -> play count has not updated
    4. Sync iPhone -> play count in Music Library updates
    This implies to me that syncing from the iPhone on iOS5 CAN work. The functionality is there, just broken.
    Repeating those steps, but playing the song on the phone, not iTunes sees the iPhone count update, but not Music Library.
    Starting a fresh library (yeah, I know, I don't want to do that either) and leaving the phone in Automatic mode appears to sync plays from the iPhone when played from the iPhone. I just tested with one track, but it seems to work without issue.
    Starting a fresh library and using Manually Manage Music does not work, or at least I can't get it to. It behaves the same as keeping the existing library in manual mode. iPhone count updates, library count doesn't.
    The last thing I want to do is start a new library and turn off Manually Manage Music. For the time being I've changed my database import from reading the music library XML to exporting a playlist from the phone of the day's plays (including play date and count) and importing from that. At least for a bit to see if this gets syncing issue fixed - or if I can find the magic combination of making it work again with my existing music library in manual mode.
    If anyone learns anything further about how to get it working or has any further diagnosis please post.

Maybe you are looking for