Workflow - Create a new buisness object type for an new infotype.

Hi all,
I have an issue with creating a new buisness object type, which is related to a
supertype, for an new infotype.
I am new to workflow and business object. I don't have much knowledge in these area. I need to resolve this problem ASAP.
Could someone please provide me a step-by-step guide on how to create a new business object type, which is related to an existing supertype, for an newly created infotype?
If would be very much appreciated if someone could assist me in resolving this issue.
Thank You.

Business objects are maintained in SWO1 creating a subtype is done with the button: Create subtype (F9)
If you don't have knowledge of workflow or abap objects, it is perhaps better to tell your employer that and find someone who has.
If your problem is simply only creating a subtype then go with the instructions I already gave you, if however more things need to be done, like extending the subtype with (virtual)attributes, methods, events, delegating the subtype and implementing the methods in newly created tasks and subsequently workflows I really advise to find someone who can do this, or attend a SAP course on this subject.
Kind regards, Rob Dielemans

Similar Messages

Object type for Proxy for sending Notifcation Workflow

Hi
Object type for Proxy for sending Notifcation Workflow.
Early reply is highely appriciable.
Thanks,
Naidu.

Could you make your post more cryptic? There were still some things I could understand.
Perhaps you should take a look at the forum guidelines and especially at the part on asking a question. you can find the forum guidelines through the sticky thread at the top of this forum or through the Community Guidelines which you can find on the left side of your screen.
Regards,
Martin

Predefined object type for Purchase order release stratergy

dear experts,
There are already predefined object type for purchase order like bus2012 where i can create new events and methods. I want to know is there any predefined objects for purchase order release strategy. The requirement is there i want to define method, that should display the po release screen. If i bind this method with work flow template, mail should be triggered and if i click the mail po release screen should be opened for respective material...
regards,
Kandhan G

Hello
I'm using the BUS2012 Object type in workflow task but in simulation the task run correct but in the transaction when modify a purchase orden the task send an error...
maybe the error is similar...did you solve this problem?..
Thanks!
Wladimir E.
[email protected]

Object type for service notification?

Hi guys,
In workflow what is the object type to create service notification (IW51). How can I find it?
thanks in advance.
Regards

The object type for service notifications is BUS2080. You can find it via transaction SWO1 - use the search help on the Object/Interface field. You can also use the Business object repository (Browser) button on SWO1.

Business object type for parked invoices

Hi,
We are using documentum to store documents that have been attached to business object types in SAP. The business object types are configured in transaction OAC3 to point to a pre-configured content repository.
Having this configuration allows the object type to use the "services for objects" option, enabling it to store attachments.
The business object types for invoices have been configured and we are able to store attachments. However this does not seem to work for "Parked invoices". The configuration in the "services for objects" component is not there and the feature to store the attachment is disabled.
As the configuration needs to be done for all object types that need to be able to store attachments, maybe someone here can indicate what the object type is for parked invoices. Alternatively, maybe there is a way to look up the various business object types.
Any help you can provide is appreciated.
Thanks.
Kind Regards,
Giwan

Hi ,
Thank You for your reply.
I created inquiry . it takes BUS2031.But BUS2031 is used for quotation.But that inquiry is open in VA12(Change Inquiry) Transaction,not open in VA22(Change Quotation).
Is there any setting for BOR object types to Document Types.
Please give me a reply as early as possible.It's very urgent.
Thanks,
Saritha

Business Object Types for Z-tables

hi
could anyone please guide me how to create business-object-types for Z-tables?
thanks in advance
regards
pavan

Hi,
Business objects (SWO1) are representations of business entities.
So it is impossible to ask I need to create a business object for a z-table, because that's not business specific.
Normally when you're faced with a BO issue, you first search for useable existing BO's. In there you also search if SAP has already provided the wanted functional requirement. If this is not present, you then search for a BO which is closest to the Functional requirement and then create a subtype of that BO en extend it to suit your needs (attributes, methods, events etc.) via delegation you can then also se it in sap standard.
for more infor check the SAP Business Workflow

What is the Object Type for User Define table ?

Dear All Experts,
I create one of the User Define Table with no. of UDF's
I already register User Define Table with Unique ID.
As per my knowledge, Unique ID is our Object type for that User Define Table.
I want to add Transaction Notification Code for created Used Define Table.
This Transaction Notification prevents user to must enter name in that form.
IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
BEGIN
If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del )
begin
SET @error = 1
SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Please help me for this problem.
Thanks & Regards,
Nishit Makadia

Hi All,
Thanks for your replay.
Below code is working for User Define Table's Transaction Notification
IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
BEGIN
If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del)
begin
select @error = 10
select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Necessary to Remember 4 Things. That are mentioned below.
1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
4) Use error code as 10 Number
Thanks & Regards,
Nishit Makadia

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

Object type for incoming payments object

Dear All,
I need to write the transaction notification for incoming payment documents, but I am unable to find out the object type for incoming payments object.
I have checked the object type 24 (receipts), but it is not for incoming payments. Any idea??
Thanks in advance..
Suresh Yerra.

Hello,
Generally try this in the transaction notification (this logs every call of transaction notification)
if not exists (select * from sysobjects where name = 'T_TransactionNotification')
begin
     create table T_TransactionNotification(
     TransactionDate datetime,
     ObjectType nvarchar(20),
     TransactionType nchar(1),
     NumOfColsInKey int,
     ListOfKeyColsTabDel nvarchar(255),
     ListOfColsValTabDel nvarchar(255) );
end;
insert into T_TransactionNotification
(     TransactionDate,
     ObjectType,
     TransactionType,
     NumOfColsInKey,
     ListOfKeyColsTabDel,
     ListOfColsValTabDel)
values( getdate(),
          @object_type,
          @transaction_type,
          @num_of_cols_in_key,
          @list_of_key_cols_tab_del,
          @list_of_cols_val_tab_del);
then issue a incoming payment (i have payed a invoice with bank transfer)
you will see the following
2010-01-20 14:45:20.907     24     A     1     DocEntry     2010390001
2010-01-20 14:45:20.903     321     A     1     ReconNum     1838
2 records will be inserted
- 1st for payment with object type 24
- 2nd for reconsiliation of invoice and payment i have payed in this example.
Regards,
J.
Edited by: János Nagy on Jan 20, 2010 2:45 PM

Object type for Vendor Invoice (FB60) to attach image

Hi,
I was wondering if any of you experts would know the Object Type for Vendor Invoice which allows an image to be attached to it in early archiving.
Many thanks
G

The object for attaching an image to a document entered directly into FI is BKPF. This is the object for vendor invoices entered into FB60 as well as vendor credit memos (FB65), customer invoices (FB70), customer credit memos (FB75) and GL adjustments (FB50). It also applies to any document posted via a complex (non-enjoy) FI transaction like FB01.

Object type for multiple/text/unrestricted property

          Hi,
          Does anybody know what's the object type for multiple/text/unrestricted property.
          I tried to use um:setproperty tag to set the value of a multiple/text/unrestricted
          type property in jsp. I got the following error if the object type I use is ArrayList:
          javax.transaction.TransactionRolledbackException: Transaction: '995540362044_8798'
          rolled back due to EJB exception:
          java.rmi.RemoteException: EntityPropertyManagerImpl.insertTypeSpecificValue():
          caught ClassCastException. The reason might be because the type of the passed
          value does not mismatch the property type stored in schema information. Expected
          object type is: 3 and the object type was: java.util.ArrayList
          Does anybody know what's this type 3 object?
          Br,
          -Niyue Chen


Hi All,
I need to convert the amount value in comma to dot say 1000,00 to 1000.00.Any function module is there to convert it.After converting it i need to pass this value as exporting parameter to a function module having data type as character(lenght 13).
Thnks
Deb

Object Type for Freight

Hi
What is object type for Fright Charges ?.., In the sdk help center how to find the object type. Please help me.
Thanks&Regards,
Vidhuroo.

Okay,
you can use this code:
    Dim query = DirectCast(MyCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset), SAPbobsCOM.Recordset)
    query.DoQuery("SELECT [ExpnsCode] FROM [OEXD] ORDER BY [ExpnsName]")
    Dim expenses = DirectCast(MyCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oAdditionalExpenses), SAPbobsCOM.AdditionalExpenses)
    expenses.Browser.Recordset = query
    expenses.Browser.MoveFirst()
    While Not expenses.Browser.EoF
      Dim name = expenses.Name
      expenses.Browser.MoveNext()
    End While

Sender object type for price catalog in Generation of BizPackage

what is sender object type for price catalog in Generation of BizPackage and BIU under bizPackage Generate (SAP B1iSN Tools)
i should put PRICAT (the msgtype in the model view or PRICAT02 in standard basic IDoc types)
Thanks
elson

If i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
<?xml version="1.0" encoding="utf-8" ?>
<BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
<BO>
     <AdmInfo>
          <Object>4</Object>
          <Version>2</Version>
     </AdmInfo>
     <Items>
          <row>
               <ItemCode>AAAAAA</ItemCode>
               <ItemName>BBBBBBBBB</ItemName>
          </row>
     </Items>
     <Items_Prices>
          <row>
               <PriceList>1</PriceList>
               <Price>27.400000</Price>
               <Currency>EUR</Currency>
          </row>
          <row>
               <PriceList>2</PriceList>
               <Price>0.000000</Price>
               <Currency>USD</Currency>
          </row>
     </Items_Prices>
     <ItemWarehouseInfo>
          <row>
          </row>
     </ItemWarehouseInfo>
     <ItemPreferredVendors>
     </ItemPreferredVendors>
</BO>
</BOM>
BR

Object type for connection object

Can any one tell me the object type for the connection object.
Regards, Goksi

hi goksy
go to swo1
click push butt BUSINESS OBJECT REPOSITORY
and click all types in the pop up screen
then u need to xpand the sap util node
then u will find all the isu objects involved
hope it will be useful to u
kr
raj

Object Type for Bill of Materials

What is the object type for bill of materials? I am trying to add the code that updates the finished good item sales weight according to the weight of the Bill of Materials. Only one item in the bill of materials actually contains weight information so there is no conflict regarding cross units of measure. So, the finished good will have the same weight as the raw materials.
Here is what I have so far. Though I'm not sure what the Object Type is for Bill of Materials. I'm also unsure about some of my code - Please review my code as well.
IF (@TRANSACTION_TYPE = 'A' OR @TRANSACTION_TYPE = 'U') AND @OBJECT_TYPE = '68'
BEGIN
     UPDATE OITM SET
          SWeight1 = (SELECT SUM(dbo.OITM.BWeight1) AS Weight
               FROM dbo.OITM INNER JOIN dbo.ITT1 ON dbo.OITM.ItemCode = dbo.ITT1.Code
               GROUP BY dbo.ITT1.Father
               HAVING (dbo.ITT1.Father = @LIST_OF_COLS_VAL_TAB_DEL)),
          SWght1Unit = (SELECT dbo.OITM.BWght1Unit
               FROM dbo.OITM INNER JOIN dbo.ITT1 ON dbo.OITM.ItemCode = dbo.ITT1.Code
               GROUP BY dbo.ITT1.Father, dbo.OITM.BWght1Unit
               HAVING(dbo.ITT1.Father = @LIST_OF_COLS_VAL_TAB_DEL) AND (dbo.OITM.BWght1Unit IS NOT NULL))
     WHERE ItemCode = @LIST_OF_COLS_VAL_TAB_DEL
END
Thanks

I found it. The object type is 66 Product Tree. It appears my code works as well - yeah!

Workflow - Create a new buisness object type for an new infotype.

Similar Messages

Maybe you are looking for