Workflow for PP01 ( Maintain Data)

Hi Experts,
Could you please let me know the workflow for PP01 ( Maintain Data ). whenever the Object type is changed from Active/Planned/Submitted/Approved/Rejected. an E-mail has to be sent through Workflow.
Thanks in Advance.
Regards
Santosh Kumaar.M

There are some events that are triggered on changing data........
you can go to swels to activate the event trace
and swel to read it.......
change the data and identify the event getting triggered.......
go to swe2
to identify if there is any workflow available linked to this event and then activate the linkage...... if available otherwise you can put your custom workflow with the event....
Regards,
Divya

Similar Messages

Workflow for po delivery date

Hi
Good morning to all .
Well I am an abaper and new in workflow . i got a requirement to mail a user two day before po delivery date .
can any one guid me .
Regards
Rakesh kumar singh

I think if you are changing the Delivery date you can track this as the Change Event of BO BUS2012 gets triggered. You can track what type of change by coding in a virtual attribute of your Custom BO which is delegated to standard BO. In the attribute you should code that filter the changes are relevant(Delivery date change) for workflow or not. If the changes are relevant the Flag will be set. In the start condition(SWB_COND) of Wflow you should make use of this Flag for triggering.
Regarding sending mail at end of day this can be done using Requested start Tab of step in Workflow Builder.
Thanks
Arghadip

How to create a workflow for personnel data?

Dear All,
              I want to create a workflow for entering personnel data and submitting it to the immediate senior.I had created a workflow for leave approval.Can anyone tell me steps for creating the workflow for personnel data.
                           Pratighya Jain
Message was edited by: Pratighya jain
        Pratighya Jain

Check this documentaion on SAP Business Workflow, which is built in HR:
http://help.sap.com/saphelp_46c/helpdata/en/a1/172437130e0d09e10000009b38f839/frameset.htm
Things that can be done are eg:
Application forms and everything for handling them
Absence approvals, travel requests, expenses
Time
Pls don't forget to reward points and close the question if you find the answers useful.

Workflow for Maintenance of records

What is the best practice for MDM workflows for Product Master data maintenance? This is specifically about manual vs automatic workflow trigger.
Automatic Trigger - As and when record change, workflow trigger. No Need for people to go manually and initiate the workflow. Easy for user(s) to maintain. But with this, we will loose the functionality (Compare from original Records) as records change happen before trigger. We never know what changes made in user friendly manner.
Manual Trigger - Item needs to be attached manually to maintenance workflow. User needs to know about this step and have this additional work. This will not work, if somebody is changing record on portal. But this way, we will use the functionality for (Compare from original records) as record change happen after workflow trigger.
Any suggestion?

Hi Rt,
If you compare Automatic Importing to Manual importing.
Automatic will be the prefered option as any business process will prefer Automation over manual due to serveral reasons some of them being lesser manual error,Less time better efficiency etc.
If you have a set of say 1 million records and in a delta import process say 10000 records gets changed.If you wish to run a maintainence workflow on these 10000 records mnaully will be a hectic and tedious task.
On the other hand if you have set the trigger to automatic trigger action for record update.Automatically these updated records will move to the workflow.
If you really wnat to keep a track of the updated records you can try using one of the below strategies:
- Enable change tracking wherein you will be able to view the old value and new valueof the changed records.
Kindly refer the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/frameset.htm (change tracker)
http://help.sap.com/saphelp_mdm550/helpdata/en/45/c87d0243e56f75e10000000a1553f6/frameset.htm (Change Tracker Configuration)
- Use a time stamp field which will get updated everytime a records gets modified for a particular field.
Hope It Helped
Thanks & Regards
Simona Pinto

Where we maintain data for this Table T015W in SPRO

Hi Gurus,
I wanted to know that where we maintain data for this table T015W.
This Table relates to banking.

Hello,
You could maintain the instruction keys in SPRO under the path
Financial Supply Chain Management > Treasury and Risk Management > Basic Functions > SAP Business Partner for Financial Services > Settings for Financial Services > General Settings > Basic Settings > Define Instruction Keys
Kind regards,
Vinodh

Installed Base(ibase) data for segmentation/maintaining customer marketing

There is a need to use Installed Base(ibase) data for segmentation/maintaining customer marketing attributes e.g. whether customer on active support agreement(yes/no), product line, version no., etc.
So if the ibase data is updated, the changes should flow back to segmentation/marketing attributes of the business partner/
Please help with any approach which can be useful in this scenario.
Edited by: ankitarora on May 4, 2011 12:42 PM

Please find the reply for your query,,,,,these are the related information
LIST OF DATA SOURCE
CRM IBase Transaction Data
0CRM_SRV_IBASE_TRAN
CRM IBase Master Data
Technical name: 0CRM_SRV_IBASE_ATTR
Installed Base Category - DataSource for Texts
Technical name: 0CRM_IBTYPE_TXT
Characteristic for IBase or Component - DataSource for Texts
Technical name: 0CRM_IBFLAG_TXT
GUID of Installed Base/Component - DataSource for Texts
Technical name: 0CRM_IBAKEY_TXT
IBase Text Component - DataSource for Texts
Technical name: 0CRM_IBTEXT_TXT
DSO:
CRM Service - Installed Bases and Components
Technical name: 0CRM_IBCO
QUERYS
Installed Base Analysis by Location
Technical name: 0CRM_IBCO_Q0101
Installed Base Analysis by Business Partner
Technical name: 0CRM_IBCO_Q0104
Analysis of Products in Installed Bases
Technical name: 0CRM_IBCO_Q0102
Analysis of Individual Objects in IBase Components
Technical name: 0CRM_IBCO_Q0103
More information
http://help.sap.com/saphelp_nw70/helpdata/EN/ef/c4e1edcb84fa4abd6ddd00130de600/frameset.htm
For more information, see the CRM documentation under mySAP Business Suite à mySAP Customer Relationship Management à CRM Enterprise à Analytics à Service Analytics.
Regards
Srini

Workflow for INBOUND IDOC

Hi,
I want to set you a workflow for one IBOUND idoc coming via edi partner. I want to use the organization units and then assign the user to it. what are the steps required for setting up a new workflow totally from the start for a IDOC / Message type and config.
Thanks in adv
/Manik

STEP 1.       USE   SALE -> Error Handling
STEP 2.   Go To Basic Workflow Settings.Use Auto-customise button to allow the system to configure most of the options.
STEP 3
a)Go to SAP MENU -> TOOLS-> BUSINESS WORKFLOW ->
DEVELOPMENT ->DEFINITION TOOLS->TASKS
b) Create a customised task putting IDOCCLFMAS for example   as object type and    INPUTFOREGROUND as object method.
c)Associate the triggring event InputErrorOccurred with the standard task.
d)Associate the terminating event InputFinished with the standard task
e) Assign appropiate agent to the customised task. For this GO TO
     Additional data -> Agent assignment -> Maintain
STEP 4 -- Go to transaction WE20.In the partner profile of the message type CLFMAS enter for the post processing permitted agent.Enter the agent type (Organisational unit,Workcenter,Job,Person,Position or User),agentId and the language.
STEP 5- In case of any error in processing of Idoc a workflow notification is sent to concerned agents.The message is sent to the inboxes of concerned persons which indicates which interface has erred,the associated IDOC number ,status of the IDOC and the date and time of error.
Regarding the complete set up you can check the workflow tutorial in help.sap.com.
regards
Aveek

Workflow for organization change request

Hi all,
I need to develop a workflow for all changes done to organization structure.Whenever any change is done in the organization structure,a notification should go to the highest node user that what changes have been done to the nodes below.Is it possible to develop a workflow for this?
If so,can some one explain me the tasks that will be involved and the Business Object type to be used?
Thanks!

Hi,
Please check Alert customizing.
Event Control for Organizational Management
Use
In this IMG activity, you can define whether the events of the event schema for the employee (DEPARTMENT_CHANGED and ADRESS_CHANGED) are to be used. These events are then triggered when the organizational unit or the address data of an employee is changed. Then, depending on the settings in the associated event schema, SRM Alert Management is used to trigger an alert, provided that you have entered the schema.
You maintain this in the IMG activity Define Event Schema.
You can change the event text under Define Events.
Activities
If you want to activate the event schema for the employee, enter the value for the business object Employee (BUS1006003) in the Event Schema field. The default value is MA.
To deactivate it, leave the field empty.
Regards,
Masa

Need a workflow for a concert

Recorded a rock concert and need a workflow on what to adjust first then what.

I recorded the Brian Wilson & Jeff Beck concert on Saturday using a a Zoom H4n using the 2 onboard mics. I want create a person CD. The sound needs some improvement and my old Audition settings somehow got deleted. Do you have any suggestions.
Ed Dhyne
Imaginative Systems Inc.
954-755-8765 Direct 954-608-6603
[email protected]
www.imaginativesystems.com
Date: Sun, 29 Sep 2013 07:44:09 -0700
From: [email protected]
To: [email protected]
Subject: Need a workflow for a concert
    Re: Need a workflow for a concert
    created by SuiteSpot in Audition CS5.5, CS6 & CC - View the full discussion
This is a very open question so I think you need to provide a bit more detail so that others might be able to add some constructive thoughts
For example what did you actually record - You could have recorded one track of audio from the audience on your iPhone or 48 channels of seperate mic feeds from the FOH desk - if you get my drift
Then some indication as to what you are trying to achieve - are you looking to make corrective edits/fixes etc, are you mixing an album
Then you need to ask yourself does anything need 'adjusting' and if so why?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5722895#5722895
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5722895#5722895
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5722895#5722895. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Audition CS5.5, CS6 & CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Specs and workflow for creating opening/closing titles for video

I'm trying to create specs/workflow for videos that I will be adding opening and closing titles to (black background with colored text), using QuickTime Player 7 (Pro).
The videos are .mov, AVC coding, 1280x720, millions, 30fps, a sample video had a data rate of 7,463 kbits/second.
I created 1280x720 300dpi (perhaps I should have used 72dpi?), saved as a .jpg (highest quality), then copied the .jpg contents into a QuickTime Player 7 (Pro) blank document multiple times until I had enough frames for my need. The resultant video was very large; 339,743 kbps/second. I then exported to H.264, which brings the data rate down to only 214 kbits/second (and looks fine) and then copied that into the head of my AVC coding video.
Questions:
1) When I exported to H.264, the x pixels increased by 6, to 1286. After pasting that video into the AVC coding (1280x720) video, the resultant movie is 1280x720. Did my graphic get compressed by 6 pixels horizontally?
2) Does my method of converting the huge graphic movie to H.264, and then pasting it into the AVC coding make sense? The combined video has AVC coding, according to Movie Inspector; does the H.264 of the graphic get converted automatically? Any better way to approach creating my titles?
Note: these AVC coding videos may get converted to H.264 for some use, but for now, I'm keeping the highest quality (source) video I have to work with.
Thanks,
Bob

"First, tell use why you're not using FCP's titling and keying capabilities."
I don't own FCP.
"Then, explain why you're doing it this way."
I'm able to create graphics with plenty of control in a graphics program (PhotoShop in this case).
"There is no dpi in video, there are only pixels."
Sorry, I posted my thread then realized I left out a bit of info, but couldn't edit the post. I should have written that I created my graphics file in PhotoShop, hence the dpi reference.
"A black background for text is not the same as using an alpha channel."
OK. The portion of my video with titling stands by itself; that is, I'm not overlaying titles on existing video. Is there a use for alpha channel if I'm working up standalone title video frames? Uses less data rate?
It seems from your inference I would be best served by purchasing FCP, so I'll probably take that advice and buy it.
From a general video production point of view, I'd still like to learn more about creating titles in a graphics app and bringing them into QT Player; what format to bring them in as (e.g., H.264 into an AVC coding video, as I've done, or ?), and what happens when my graphics video gets converted from 1280x720 to 1286x780 (AVC export to H.264), and then brought into an AVC codec movie, and the movie remains at 1280x720-- does the graphic get horizontally widened, or the vertical compressed? Thanks.
Bob

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

How to schedule a workflow for recurring executions: The solution

Scheduling a workflow for recurring execution has been long awaited in WFA, perhaps from 2.0 time. The following document shows how to get it done. I've also explained the logic behind it. It’s very simple to use, meets every requirement which one can have from a scheduler and of course highly flexible. Let's go!! The Real stuff. What is this? Is this actually a scheduler? No. This is actually a command in your workflow, but a special 'magical' command. This 'magical' command logic is built using the answers for the following questions: Can a workflow be scheduled for a delayed execution in a future time? Yes, but only one execution instance. If you want the next execution, execute the workflow again providing the same set of inputs and the execution date/time.During workflow execution, can a command inside a workflow get to know what is the name of the workflow? YesDuring workflow execution, can the command know what is the job execution id? YesIs there any programmatic interface available to know what are the user input provided or a particular job execution? YesCan a command inside a workflow trigger another workflow? Yes.Can a command inside the same workflow trigger itself? Absolutely yes. I've ticked all boxes needed to build such a solution. The solution is to make the workflow a smart workflow, so smart that it can schedule itself for the next execution. It no longer needs any other task scheduler to tigger it. WFA provides a large set of REST APIs for other 3rd part SW integration. But I also can make good use of these APIs to make smart workflows. I have always believed that WFA should not only be seen as a framework for automating Storage boxes or server, but just about any task( inside a computer of course) which is done manually. WFA is an awesome product indeed. So this is a command called "Workflow Scheduler" which you can put in your workflow as another command. Prerequisites: You need PowerShell 3.0 on your WFA server. I certainly could have done it for PoSH2.0 as well, but life for web interfaces using PowerShell is so much easier with Posh3.0. Posh3.0 is a big jump from 2.0. WFA is fully supported to work on Posh3.0. Its available by default in Win2012, Win2008 can be upgraded, Win2003 users can't use it. Add credentials of a WFA Admin/Architect in you WFA itself with Name/IP: localhost Match: ExactType: OtherName/IP: localhostUsername: <WFA Admin/Architect Username>Password: <User Password> 3. Minimum WFA version 2.2. This is only needed for Importing the dar. I've provided the command code in text too. The command code is the real deal. How to use it? If you have a workflow which you want for recurring executions, just add this command "Workflow Scheduler" in it. The command takes parameters for the workflow execution intervals. For example minsInterval for executing this workflow every x minutes, or daysInterval for executing the workflow etc.Now just like a normal workflow execution execute this workflow deciding what is the trigger time. Example: Suppose you want the execution every day at 10:00 PM.So provide daysInterval = 1 And execute the workflow for a delayed execution at 10:00 PM. You can pick the day to start as you wish. The workflow will execute at 10:00 PM and when this execution reaches our magical command "workflow scheduler", this command will trigger the same workflow with same set of inputs for the next execution at 10:00 PM tomorrow. And so on an so forth. I’ve attached a very simple example workflow here to help you understand. An Example of a workflow scheduled for recurring execution Daily at 11:30 PM starting 10-March-2015 How to stop/suspend this recurring execution? Easy. You just abort the next scheduled job execution in Execution=> Execution Status. The cycle will stop. How to resume it? Easy again. Just resume the same aborted job. The cycle restarts. Can I change the schedule execution time? Yes. After aborting the current execution, you can resume the same workflow at a new time. Execution interval can't be modified as you can't change the command parameters. But the recurring execution now can occur at a new time. Where or which position to place this “workflow scheduler” command in your workflow? At the beginning ? At the end? Or somewhere in the middle. This completely depends on your choice. See some below cases. You don't want the next job execution scheduling to happen if any of the commands in my current workflow execution fails: Put command “workflow scheduler” in the end. It will trigger the schedule of the next job execution only when all real original commands of your workflow have passed. else not. You want continuous job executions irrespective of the workflow command failures: Put it in the beginning. It will trigger the schedule for next execution before any of the actual command begin executing. You want an approval before the next execution job is scheduled: Add an approval point before the comamnd. So it’s all left to you. Can an operator decide the execution schedule? Yes, but which workflows will be available to him/her for this recurring execution will have to be decided by the designer. This is a good thing to have as it serves for access control in a way. The Architect/Admin can now restrict which workflow can be put for recurring executions. Operators can’t execute just any workflow available to him for automatic recurring execution. And the workflow designer can also choose which scheduling parameter is to be made a variable for the operator. For example the designer want the operator to schedule a given workflow only for weeks Interval and not months or days i.e. he/she can only chose to schedule for weekly, biweekly etc. executions and nothing else. For this the designer can define a User-Input variable only for weeksInterval parameter. It’s Done. You want workflow execution to be scheduled either for daily or once in 2 days but not any other. You can restrict this. Or he/she wants to give full freedom to the operator make his/her own decision about scheduling, he defined user-input variable for all scheduling parameters. The workflow designer wants weekly schedule but the day should not be a weekday: You can even do this. Is this flexible enough for my requirements? I’ve attached the very command code. You can modify the command as per your requirements. Suppose you want daily execution of a certain workflow at 10:00 PM but skip a day of execution if the day is a Monday. Modify the code check for the day and add another day if it’s a Monday. Its posh code and highly readable. So you can see how this can be used in a variety of ways. This is the beauty of a programmatic solution. Its highly flexible, it allows users to design solution based on their requirements. Flexibility is the heart & soul of WFA. Thats why I like it. I have a workflow but I don't want to modify it by adding a new command in it. Can I still use this solution? Yes but with WFA 3.0 on wards. WFA3.0 allows to create modular workflows. Create a parent workflow with you actual workflow as a child workflow in it. Add our “workflow scheduler” command too. So now you don't need to touch your existing workflow. I've attached a workflow example here. Have fun!! sinhaa

Providing a new version 1.1.0 of the command "WFA Schedular" Changes made: Added conditional String Representation based on the Scheduling parameter provided. Provided check for the right number of parameters passed into the command.Added a new parameter "Expiry Date" to automatically stop the recurring execution upon expiry.Check for Posh3.0 version in code.Have Fun!! sinhaa Below example for:Schedule a workflow for recurring execution every alternate day i.e. once in 2 days at 10:30 PM starting 06-Jul-2015 (Today's date is 02-Jul-2015) . The recurring workflow execution should expire on 31-Dec-2015 and stop.

How to change workflow for expired qualification in HR Module

Hi,
My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
I have serached sap help but i am not understand please below mention URL for SAP help
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
Please explain step by step how to trigrred workflow for expired qualification?
Please this problem is high and try to solve it.
Thx!
Sachin

Hi,
Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
Hope I am clear and this helps and if you need more details, reply.
venu

Start a workflow for a list item that was created by someone else

What settings do I need to change so that I can start a workflow for a list item created by another user?
I have a SharePoint 2013 workflow (let's call it LSR Status Workflow) that is associated with a list (called
LSR List). When a user creates an item in the LSR List, it automatically starts the
LSR Status Workflow. That is what I wanted, but sometimes I make changes to the workflow (via SharePoint designer) and then I would want to terminate the existing workflows that are running and restart them.
When I try to start a workflow for anyone other than a list item that I created, I get the following error:
Retrying last request. Next attempt scheduled in less than one minute. Details of last request: HTTP NotFound to https://publishing.web.company.com/sites/mysite/_vti_bin/client.svc/web/lists/getbyid(guid'1f844b8f-19aa-4587-bcc2-dfb7085f36b5')/Items(31)
Correlation Id: 8efc5304-f0a3-90f6-8ece-6875bf811869 Instance Id:
60c83aae-5c25-4ee8-9c85-c64958ba701e
Then when the workflow is finally suspended after it keeps retrying, it reports the following error:
RequestorId: 8efc5304-f0a3-90f6-0000-000000000000. Details: An unhandled
exception occurred during the execution of the workflow instance.
Exception details: System.ApplicationException: HTTP 404
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["36"],"SPRequestGuid":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"request-id":["8efc5304-f0a3-90f6-9bbd-d18d4d90af1b"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue,
10 Feb 2015 22:36:44
GMT"],"Set-Cookie":["BIGipServerpublishing-blv-80-pool=2825582466.20480.0000;
path=/"],"Server":["Microsoft-IIS/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext
context) at
System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at
System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
If I created the list item, I can stop it and restart it without any problems, but this is not the case for list items created by someone else.
What settings do I need to change so that I can start a workflow for a list item created by another user? I am the owner of the SharePoint site and am able to make changes to permissions if needed.

You don't need to re-do the fields. If you create a new version of the PDF
file just open the old one and use the Replace Pages command to insert the
pages from the new version over the old ones. This will give you a new
version of the file, with the existing form fields still in tact. Of
course, you might need to adjust their location and/or size, but at least
you won't have to start all over again...
On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

A workflow for a new MM vendor invoice showing the error.

We have detected the following strange behaviour in our workflow runtime environment.
A workflow for a new MM vendor invoice is started as it should.When we see the workflow overview it shows status u201CIn Processu201D.
f the workflow shows the status u201CIn Processu201D for an hour or more, a new undesired workflow (same WF-task) is started automatically for the same invoice. Nobody has triggered this new undesired workflow.
Please let us know the what is the problem
Thanks
Sarin23

Hi,
Please see the below link and this will help you.
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/saphelp_46c/helpdata/EN/c5/e4a930453d11d189430000e829fbbd/content.htm
Anil

Workflow for PP01 ( Maintain Data)

Similar Messages

Maybe you are looking for