Workflow manager 1.0 : runtime error 400 running Add-WFHost "The api-version in the query string is not supported"

Installing Workflow Manager 1.0 for SharePoint Server 2013 SP1 everything is fine until the last step of the configuration and last powershell command :
Add-WFHost -WFFarmDBConnectionString 'myconnectionstring' -RunAsPassword $WFRunAsPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -CertificateAutoGenerationKey $WFCertAutoGenerationKey -Verbose;
gives me the following error :
Add-WFHost : The remote server returned an error: (400) Bad Request. The api-version in the query string is not supported. Either remove it from the Uri or use one of '2012-03'..TrackingId:412684e3-3539-468e-91e6-17838c6eaa55_GS
P,TimeStamp:04/04/2014 12:54:11
At line:1 char:1
Can't find anything about this subject except this
thread which does not help me that much in SharePoint dev env ...
Removing workflow manager 1.0 and service bus (leave the farm using wizzard, remove binaries and databases) does not help.
Who already faces this issue and how can I try to resolve it ?
Best regards !
Alexandre DAVID

The API version is hardcoded in Microsoft.ServiceBus.dll, which ships as part of the Service Bus. Each version of this lib has a different string.
If you install workflow manager 1.0, here are the pre-requisites:
.NET Framework 4 Platform Update 3 or .NET Framework 4.5
Service Bus 1.0
Workflow Client 1.0
PowerShell 3.0
The following are the pre-requisites to configure Workflow Manager 1.0
Instance of SQL Server 2008 R2 SP1, SQL Server Express 2008 R2 SP1, or SQL Server 2012.
TCP/IP connections or named pipes must be configured in SQL Server.
Windows Firewall must be enabled. [Windows Firewall is Off on target server]
Ports 12290 and 12291 must be available.
Here are the reference for installing and configuring Workflow Manager 1.0:
http://lennytech.wordpress.com/2013/06/02/installing-workflow-manager-1-0/
http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0/
http://social.technet.microsoft.com/Forums/en-US/c74507fb-ac2d-405f-b19c-2712b1055708/workflow-manager-10-configuration-service-bus-for-windows-server-the-api-version-is-not?forum=sharepointadmin

Similar Messages

Error message: URL's with the type "file:" are not supported. I get this pop-up twice each time I enter Safari and Mail.

Everytime I go into Mail and/or Safari, I receive a pop-up the states "There was a problem connecting to the server. URL's with the type "File:" are not supported. The pop-up comes up twice each time and I have to click "ok" to close them. Only started after install of OS Lion 10.7. Any one else have this and is there a solution. It is just plain irrating that is does this each time I check my mail or go on the internet. Thanks!

That's interesting. I bet that helps other Safari users!

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor

I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor

I'm keen to know if you get a response to this. I've been running Elements 12 for a year now, and suddenly my Editor is not working. I'm running Windows 8.1 and just get a message that says "The Editor is not working". Not very helpful.

Photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I jus

photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

I get a runtime error when attempting to search the store in Itunes. I unistalled and reloaded. How can I fix this?

I just began getting a runtime error when attempting to search the iTunes store.
I uninstalled and reinstalled but, it's still happening.
How can I fix this so I can start to buy music again?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Publishing server doesn't work - error 'The request URL doesn't contain the query string for the client OS'

Hi,
I'm trying to setup an App-V environment in my lab.
I've used the App-V 5.0 Trial guide to help me configure all necessary components.
I'm able to install everything without error.
when come time to publish an app, it simply doesn't show up on my client.
after looking at events on the client and server, I found that the Publishing server is returning under Admin the following message.
'The request URL doesn't contain the query string for the client OS'
My setup is pretty simple.
App-V Server managament and Publishing on the same box
App-V database on my SQL server.
I'm able to see the publishing "webpage" by using http:://localhost:889.
It only display this :
-<Publishing Protocol="1.0"
<Packages />
</Publishing>
I've published one app from the management console.
any idea what could mean this error?
thanks

Hi,
thanks for the link.
I've validated the suggested debug steps. It seems that the problem is with my Publish server again.
I've looked in the web.config file. It seems to be missing some parts compare to the example provided.
Again, I've published an application from the management console. Management and Publishing are running on the same box, while SQL is remote.
Here's the web.config
<?xml version="1.0" ?>
- <configuration>
- <system.web>
<compilation debug="false" targetFramework="4.0" />
<machineKey validationKey="AutoGenerate,IsolateApps" decryptionKey="AutoGenerate,IsolateApps" />
- <authentication>
- 
<forms requireSSL="true" />
</authentication>
</system.web>
- <system.webServer>
- <modules runAllManagedModulesForAllRequests="true">
<add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</modules>
- <security>
- <requestFiltering>
- <verbs>
<remove verb="GET" />
<add verb="GET" allowed="true" />
</verbs>
</requestFiltering>
</security>
</system.webServer>
- <system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
+ <behaviors>
- <serviceBehaviors>
- <behavior name="">
<serviceAuthorization impersonateCallerForAllOperations="true" />
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="false" />
</behavior>
</serviceBehaviors>
</behaviors>
- <bindings>
- <webHttpBinding>
- <binding name="SecureBinding">
- <security mode="Transport">
<transport clientCredentialType="Windows" />
</security>
</binding>
<binding name="UnsecureBinding" />
</webHttpBinding>
</bindings>
- <protocolMapping>
<add scheme="http" binding="webHttpBinding" bindingConfiguration="UnsecureBinding" />
<add scheme="https" binding="webHttpBinding" bindingConfiguration="SecureBinding" />
</protocolMapping>
- <standardEndpoints>
- <webHttpEndpoint>
- 
<standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" />
</webHttpEndpoint>
</standardEndpoints>
</system.serviceModel>
</configuration>

Error in CodeFirst Seed with migrations : Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'.

Hi,
I have activated migrations on my Azure Mobile Services project. I filled the new seed function Inside the Configuration.cs class of the migrations. If the tables are empty, the seed function is going without any problems. When my AddorUpdate tries to update
the first object I get the error in the inner exception : "Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'."
Part of my code is as follows:
context.categories.AddOrUpdate(
new Category { Id="1", Code="GEN", Text="General"},
new Category { Id="2", Code="POL", Text="Politics"},
new Category { Id="3", Code="FAS", Text="Fashion"},
new Category { Id="4", Code="PEO", Text="People"},
new Category { Id="5", Code="TEC", Text="Technology"},
new Category { Id="6", Code="SPO", Text="Sport"},
new Category { Id="7", Code="LIV", Text="Living"}
Any help is welcomed. Thanks.
Faical SAID Highwave Creations

This occurred to me because I changed my POCO models to inherit from EntityData after I had already created my database without the extra Azure Mobile Service properties (UpdatedAt, CreatedAt, Deleted). The only way I fixed it was to drop the database and
start over with my classes inheriting from EntityData from the beginning. If you can't do that then I would create a new table with EntityData models and see how that database is created and manually update your tables to match those. Here's an image of one
of my tables from the management console on Azure. You can see that CreatedAt is an index.

Exchange 2010, khi: failed to execute Troubleshoot-DatabaseSpace.ps1 Error formatting a string: Format string is not supported

Hi,
Exchange 2010 MP fails to run Troubleshoot-DatabaseSpace.ps1. Results in a Warning with "Error formatting a string: Format string is not supported". The EventNumber is 402. The Microsoft article it points to is useless at http://technet.microsoft.com/en-us/library/749e0eac-ebb2-41e3-8fa2-4a03a1bd3571.aspx
Run ".\Troubleshoot-DatabaseSpace.ps1 -Server MailboxServer.domain.com -MonitoringContext" and works fine.
Any help appreciated.
thanks

Hi,
Before the newer MP release, we can disable these 4 monitor via override and this should not run the Troubleshoot-DatabaseSpace.ps1 :
KHI: Failed to execute Troubleshoot-DatabaseSpace.ps1.
KHI: The database copy is low on database volume space and continues to grow. The volume is under 25% free
KHI: The database copy is low on database volume space and continues to grow. The volume has reached error levels under 16% free.
KHI: The database copy is low on database volume space and continues to grow. The volume has reached critical levels 8% free.
Alex Zhao
TechNet Community Support

Error 10035 occurred at cwdaq: The specified attribute is not relevant

Not sure what board this is supposed to go under since there isn't one for the PCI-6023E or the diagnostics utility.
I have a PCI-6023E card (several in fact) that we use. I have ran several through the online diagnostics utility and they most of the tests. The two that they do not pass are the Single Pulse - "Error 10035 occurred at cwdaq: The specified attribute is not relevant." and Scan Clocks I - same error message. The card seems to fuction fine despite this. I have not noticed any problems with us acquiring data through it. I was just wondering if there was anyone that could tell me what this error means.
Thanks,
StrataTech

Hi StrataTech,
You run these tests on several of your PCI-6023E's and all of them fail these two tests? Or do only some of them fail these tests?
I did a little research on the 6023E and these error codes. I found a known issue with the 6023E failing the Single Pulse test with Error 10035 every time. That particular error/test combo is a known issue and I would not worry about it. However, I did not find anything about the Scan Clocks test failing with the 6023E (but I did see it for another E series card).
There is also an old discussion forum from 2005 where a customer's 6023E failed the two same tests yours are. He did not have any other cards to compare against, so they went ahead and RMAed his device.
Here is my personal opinion:
If all of your 6023E's fail the same tests, yet pass all of the others then I do not think you have much to worry about. If your 6023E's all pass self-test in Measurement & Automation Explorer and you can use them in your DAQ applications without any problems or weird behavior, then I would assume you are probably okay and the errors are just a false positive.
If some of the 6023E's pass tests that others do not, then I would say we have a hardware problem.
Let me know what you think!
P.S. For future reference - if you're unsure which forum to post in, I would say hardware trumps software. Since your DAQ cards are getting errors, posting in the DAQ Hardware forum would give you a better chance of getting some replies. Forums like this are more for text-based programming and the LabWindows environment. No worries though, just a suggestion!
Micah M.
National Instruments
NIC AE Specialist - Test

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

Windows VPN: Error 720 - A connection to the remote computer could not be established

Dear all
I have a windows7 Laptop 64bit Dell 1340.
I was working with a UMTS card, was connected with a VPN to a windows 2003 server over PPTP and experienced a bluescreen. After this, I have the following errors when connecting to the VPN:
"Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection"
and in the event view I receive the following:
EventID: 1, Source RasSstp
CoId={A3478DFD-FFA4-4E8F-9DA3-CE829BDA777B}:The initial Secure Socket Tunneling Protocol request could not be successfully sent to the server. This can be due to network connectivity issues or certificate (trust) issues. The detailed error message is provided below. Correct the problem and try again.
I tried to use the Rarepair.exe tool but it looks to work only on windows xp. I deleted the IP and TCP settings without any luck.
I run a registry cleaner as well with out any luck.
Your help will be greatly appreciated!
Marc

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be established

Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

Error Message: "The formula syntax is not supported by the report"

We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atul

Thanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.

The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

Workflow manager 1.0 : runtime error 400 running Add-WFHost "The api-version in the query string is not supported"

Similar Messages

Maybe you are looking for