Workflow Manager disaster recovery old instances not moving forward

Dear ALL,
I am facing an issue in workflow manager 1.0 disaster recovery.
I followed all the steps to recover workflow manager 1.0 mentioned in MSDN, new instances which I have created after restoration working fine, but the old workflow instances when I complete any of the task does not moving forward even the workflow is
not getting suspended there is no error please see the screen shot. 
Regards,
Faraz Javaid

Hi I did not republish the workflow and the behavior was same for old workflow instances as mentioned in my question.
Then I republished the workflow thinking that it might solve the problem but the result remain the same. I have check the Logs but unfortunately I did not find any noticeable error.
Faraz Javaid

Similar Messages

  • SQL Developer, Deploy Cloud Cart Status is at Approved for a long time and not moving forward i.e. not processing.

    SQL Developer, Deploy Cloud Cart Status is at Approved for a long time and not moving forward i.e. not processing.
    Please help.
    Thanks
    Srinivas

    Hi Gustavo,
    It appears your Service SFTP user was not created correctly. Please contact support and mention the fact that your Service SFTP user appears on Security/Users tab and not on Security/SFTP Users tab.
    Vlad

  • HT4623 I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    This is a concern amoung many corporate users.  It's going to take somekind of policy change with apple.
    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number

  • Playhead not moving forward

    Hello
    The clip shows up in the canvas but the playhead is not moving forward in the timeline making it impossible to edit.
    Thanks for your help!

    Here's the info-
    Type: clip
    Creator Quick Time Player
    Source Macintosh HD:Users
    Size 516.7 mb
    Tracks Iv 2 a
    Vid rate: 59.94 fps
    Frame size 720x 480
    Compressor MPEG-4 video
    Data rate 310.0 k/sec
    Pixel NTSC  ccir 601
    Field Dominace: None
    Alpha None/Ignore
    Composite Normal
    Audio 1 stereo
    Aud Rate 48.0 khz
    Aud Format 32 - bit floating point
    Sequence Properties
    Tracks
    1V, 2A
    Vid rate 29.97 fps
    Frame Size 720x480
    Compressor DV/DVSPRO - NTSC
    Pixel Aspect NTSC - CCIR 601
    Field Dominance Lower (Even)
    Audio 2 Outputs
    Aud Rate 48.0 KHZ
    Aud Format 32 Bit Floating Rate
    I expiremented and "Toasted" the files to DV and now the playhead is moving forward. Is it because FCE perfers DV files?
    Thanks for your help and any info is appreciated.

  • DATABASE MANAGER ERROR "-4 database instance not found"

    Hi
    I have installed NNW 2004 ABAP Trial Version and everything seems to be good. SAP GUI is installed and MAX DB too.
    Except, I am unable to "add a database instance" in the Database Manager. The instructions tell me to leave the entries as default (database server: <local> and port: <default>) but then when I click the ADD button up pops the message:
    -4 database instance not found
    I have a 32 bit Intel Atom processor Netbook running Windows 7 with two drives C: and D:. I have tried disabling my antivir with no avail.
    I think the problem could be either:
    A) My installation is on the D drive but the database might be searching for something on the C drive????
    B) There are some "sap" type entries (like 200 of them) in my system32/drivers/etc/services file. One in particular is "sapdp00  3200/tcp" and I know the installation says make sure there are no "3200 ports". I would like to change this and save the file but up pops a message saying "access is denied" even though I have admin rights.
    Any help would be appreciated
    Josh

    Please, any hints or directions would help immensely as I am not a technical expert
    Thanks in advance

  • Sharepoint 2013 - Workflow Manager 1.0 - Certificate Thumbprint not found

    Suddenly I cannot access the status page of Workflows in my SharePoint farm because there is error "Certificate requested with Thumbprint XXXXXXXXXXXXXXXXXXXX not found in the certificate store.
    I need to Uninstall Workflow manager, Reinstall and Redeploy my Workflows to the farm. is it the only solution to fix the issue. this will make already existing workflow break.

    Hi,
    From the error message, this issue is about certificate. Please try to install the certificate of WFM server into SharePoint farm, compare the result.
    And please re-register workflow service via
    it, compare the result.
    In addition, please check the ULS log file to find more information about this issue. The path of the file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
    Thanks,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Project Online Workflow not moving forward after approval

    I'm building a custom workflow for a Project Online tenant using SD2013 but something is not working with approvals.
    In SD I create the workflow with very simple actions:
    1. Wait for submit
    2. Create approval task
    3. In stage transition, if task ended with "Approved", move to the next stage, if not, go to "Cancelled" step
    Everything works fine until the approval. I see the task, approve it but then nothing happens. The task appears as "Completed" and "Approved" but the workflow just stays there.
    I had this very same behavior on a couple of deployments in the past with Project Server 2010 in Spanish.
    The tenant created the Project Web App in Spanish as well. Could this be the cause? How can I correct it?
    Thanks in advance.
    Rene Alvarez

    I am also having the same issue.
    The task appears in the list, I approve it, then nothing happens. No error, no feedback, no history list log (I put in a log statement right after the approval task, it never runs), the workflow status page still remains as "Started".
    Any ideas?
    If online is as slow as processing approval actions overnight, then it is simply unusable.
    120811049008

  • Transports:  Best practice in reversing old transports not moved to PRD

    Hello Guru's,
    I have a lot of old transports moved from DEV to QAS that don't work or are irrelevant that need to be reversed.  These transports were made by a consultant no longer with the company and there is no documentation of what was changed.
    What is the best method in reversing these changes? 
    I appreciate your help!

    Next time, don't ask for the best practice. You would likely get more response if you simply ask "What would you do..?"
    Rob

  • SQL Server Configuration Manager 64-bit server instance not showing

    After installing SQL Server Express Advanced 2012 64-bit edition, we are unable to see the 64-bit Server Network Configuration in the left pane.  We need to edit the TCP/IP and Named Pipes to enable them.  All that is showing is the 32-bit instance
    for our Acronis backups.  Does anyone know how to view or add a SQL server instance to the Server Network Configuration msc?

    can we verify if you really installed 64 bit. please run this query and post the results:
    select @@version 
    Hope it Helps!!

  • LC ES3 Business Continuity Management / Disaster Recovery / Continuation of Operations

    Have any others in this forum deployed a COOP / DR / Site Fail-over of their LC ES3 DRM system, and have some lessons learned to share?

    Satish Kandi wrote:
    Not an expert comment on your setup but just the thoughts that came to my mind while reading this...
    1. What is the setup for backup preservation? Is it in one of the servers only? Is the backup also replicated?Belt and suspenders. The backup location on disk is part of what gets mirrored to the sister SAN. Plus, the nightly system backup to tape picks it up as well.
    2. What about OAS/Forms 9i backup? You have not mentioned anything about that.That is also mirrored to the sister SAN.
    3. What is the archive log generation frequency? Or how much data loss can you afford?A typical day will see one or two dozen archivelog files.
    >
    In addition, a daily full-system backup (to tape) is done with the db shut down, providing a daily cold backup as well as backup of the online backupsLucky you :-) but I don't see a need for this with the levels of backup that you have (especially with RMAN weekly backup and daily archive log backup). No, no need, but it does give us another layer at no real cost. This cold backup is really just a byproduct of a daily full system shutdown and backup. We have a high tolerance for system down time, but low tolerance for data loss.

  • Why are my slides hanging up, and not moving forward?

    My latest project in Captivate 4 doesn’t need graded quizzes, so when my quiz slides hung up after publishing, I deleted them and used a regular slide with roll overs to give feedback on “review” question. But the slides taking the place of deleted quiz slides are now hanging up too! It just doesn’t make sense and must be fixed before the project can continue.
    The buttons have the usual programming, like, rest of slide and “continue.” Anything else I can do? I’ve also had issues with the “click anywhere to continue” to move a quiz slide along. It will only move (that is, if it isn’t hanging up) inside the feedback box.
    And I have removed and re-loaded and added the patch to Captivate three times already.  I always do it when the program takes a long  time to close, and then, a long time to load and that usually works. And it does this on two different computers of mine. As far as I know, it's not a memory issue because it is only on these slides. But this hanging up is so weird, because if I click the Back button, sometimes it moves forward, and if that doesn't work, then clicking Back and Next moves it forward.
    So the main question is, why won't the Next button move the project to the next slide?
    Secondary question: why can't I "click anywhere to continue" because only clicking inside the feedback box works? (And because that was happening, I deleted the file and now the replacement blank or copied slide hangs up too.)
    Thanking you in advance.
    Phyllis K. Day

    I am having this same problem.  When I publish my slides to a web server the quiz exhibits the behavior where you have to actually click inside the Feedback caption to move to next action.  It is supposed to work by clicking anywhere on the slide. 
    Wondering if you ever found out what was causing this?? 
    Looks like I cannot move forward on this project except by not using Captivate.  Or somehow code up my own quiz questions.  ugh.

  • Fusion Middleware, Disaster Recovery Sites with Oracle Applications

    I have oracle applications EBS R12.x.x deployed with one disaster recovery site. I have some composite applications built on SOA 11g suite deployed at OFM which is taking care of my EBS R12.x.x (not disaster recovery site) instance. When my EBS R12.x.x down, is it possible that services deployed at OFM starts taking care of my disaster recovery site.
    Regards

    There really aren't any stupid questions, just dumb answers :-)
    Have taken a look at B/R section in Admin Guide?
    For 10.1.3.x refer this:
    http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/part5.htm#i436649
    For 10.1.2.x refer this:
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/part5.htm#i436649
    Hope this will help.
    Thanks
    Shail

  • SharePoint 2013 Update Workflow Manager problems after Service Pack 1

    Hello guys,
    I've installed the service pack 1 for SharePoint 2013 and then I tried to update the workflow manager, but I always get an error message that the workflow manager could not be updated!
    Is the installing order wrong? should I first install the update for the worklfow manager and then the update for SharePoint 2013?
    Best regards
    Matthias

    The error message see below for "Cumulative Update for Workflow Manager 1.0 (KB2799754)
    "One of the custom actions failed. The installation cannot continue. See log for details!"
    [06/06/14 09:48:44] Performing install.
    [06/06/14 09:48:44] At least one of the product packages has been detected.
    [06/06/14 09:48:44] preReqUpdateDisplayName is :
    [06/06/14 09:48:44]
    [06/06/14 09:48:44] Wizard mode on.
    The following products will be enhanced:
    Workflow Manager 1.0
    Attempting to open cached Msi package for product code: {04A7199E-565D-4654-88A3-80A9A7BADDD9}
    Successfully opened cached Msi package.
    [06/06/14 09:48:48] Opening Service Control Manager...
    [06/06/14 09:48:48] Operation succeeded.
    [06/06/14 09:48:48] Copying files...
    [06/06/14 09:48:48] Checking and creating target directory C:\ProgramData\Microsoft\E-Business Servers Updates\Updates\Uninstall2799754.
    [06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
    [06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
    [06/06/14 09:48:48] Package Workflow Manager 1.0 is installed.
    [06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Copying file TargetWFVersion.txt ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Copying file UnifiedWFHotfixUpgrade.PS1 ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Copying file Setup.xml ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Copying file Setup.exe ...
    [06/06/14 09:48:49] Operation succeeded.
    [06/06/14 09:48:49] Package Workflow Manager 1.0 is installed.
    [06/06/14 09:48:49] Package code is {04A7199E-565D-4654-88A3-80A9A7BADDD9}.
    [06/06/14 09:48:49] Executing preinstall custom actions. 1 actions to execute.
    [06/06/14 09:48:49] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "CS" -PackageType
    "server" -opcode "PatchBefore" -platform "x64" ...
    [06/06/14 09:48:50] Process exit code is -1.
    get-itemproperty : Cannot find path 'HKLM:\Software\Microsoft\Service Bus\1.0'
    because it does not exist.
    At C:\ProgramData\Microsoft\E-Business Servers
    Updates\Updates\Uninstall2799754\UnifiedWFHotfixUpgrade.PS1:971 char:21
    +   $sbinstallpath = (get-itemproperty "HKLM:\Software\Microsoft\Service
    Bus\1.0"  ...
    That's the log file
    Best regards
    Matthias

  • SXMB_MONI: Message not moving

    Hi,
    I am doing a mail attachment to file scenario.
    I have configured everything including CC. Now,  the data is successfully getting picked from Mail and is visible in SXMB_MOni in Inbound Message ( CENTRAL ) --> Payloads but the message is not moving forward. Also, in RWB this CC is showing processing completed.
    Please sugest what can be the reason and if any more steps are required.
    Thanks,
    Priya

    Chirag,
    The status shows Scheduled.
    Can it be due to data type mismatch.
    My original attachment looks like this :
    COMPUTERISED SPARE PARTS ORDER
    DEALER CD  : 10424
    ORDER REF  : SP/174 DT.18/12/2007
    ORDER TYPE : R
    ITEM CD       QTY
    12345678         45     
    30151105       40
    31151060       40
    DD191125       10
    DG161121       50
    DH101180       10
    DH111015       10
    DH121096       10
    DH161194       40
    DH201048        2
    DH201049        2
    DS101036       20
    DS101276        6
    DU191022        2
    DZ73033W        1
    GH201012       50
    JB730522        1 
    END
    and I have configured the DT for this mail as :
    DT_M1
      ~row                     0....unbounded
         ~Details              1
    Is that okay or it should be like this :
    DT_attop
      ~Header
            dealerCode
            orderRef
             orderType
      ~ItemData
        ~item
            itemCode
            quantity
    End
    Plz suggest.
    Thanks,
    Priya

  • Recovering lost data from a very old backup (disaster recovery)

    Hi all,
    I am trying to restore and recover data from an old DAT-72 cassette. All I know is the date when the backup was taken, that is back in November 2006. I do not know the DBID or anything else except for the date.
    To recover this, I bought an internal SCSI HP c7438a DAT-72 tape drive on eBay and installed it on a machine running Windows 2003 Server SP2. I made a fresh Oracle 11g Enterprise Edition installation. HP tape drivers have been installed and Windows sees the tape drive without problem. To act as a Media Manager, I have installed Oracle Secure Backup. Oracle Secure Backup sees the HP tape drive without problems as well.
    I have to admit my information about Oracle is not very in-depth. I read quite a lot of documents, but the more I read the more confused I become. The closest thing I can find to my situation is the following guide about disaster recovery:
    http://download.oracle.com/docs/cd/B10500_01/server.920/a96566/rcmrecov.htm#1007948
    I tried the suggestions in this document without success (details below).
    My questions are:
    1. Is it possible to retrieve data without knowing the DBID?
    2. If not, is it possible to figure out the DBID from the tape? I tried to use dd in cygwin, also booted with Knoppix/Debian and Ubuntu CDs to dump the contents of the tape with dd but all of them failed to see the tape device. If there is any way to dump the raw contents of the tape on Windows, I would also welcome input.
    3. Is there any way at all to recover this data from the tape given all the unknowns?
    Thanks very much in advance,
    C:\Program Files>rman target orcl
    Recovery Manager: Release 11.2.0.1.0 - Production on Sat Mar 19 15:01:28 2011
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    target database Password:
    connected to target database: ORCL (not mounted)
    RMAN> SET DBID 676549873;
    executing command: SET DBID
    RMAN> STARTUP FORCE NOMOUNT; # rman starts instance with dummy parameter file
    Oracle instance started
    Total System Global Area 778387456 bytes
    Fixed Size 1374808 bytes
    Variable Size 268436904 bytes
    Database Buffers 503316480 bytes
    Redo Buffers 5259264 bytes
    RMAN> RUN
    2> {
    3> ALLOCATE CHANNEL t1 DEVICE TYPE sbt;
    4> RESTORE SPFILE TO 'C:\SPFILE.TMP' FROM AUTOBACKUP MAXDAYS 7 UNTIL TIME 'SYS
    DATE-1575';
    5> }
    using target database control file instead of recovery catalog
    allocated channel: t1
    channel t1: SID=63 device type=SBT_TAPE
    channel t1: Oracle Secure Backup
    Starting restore at 19-MAR-11
    channel t1: looking for AUTOBACKUP on day: 20061125
    channel t1: looking for AUTOBACKUP on day: 20061124
    channel t1: looking for AUTOBACKUP on day: 20061123
    channel t1: looking for AUTOBACKUP on day: 20061122
    channel t1: looking for AUTOBACKUP on day: 20061121
    channel t1: looking for AUTOBACKUP on day: 20061120
    channel t1: looking for AUTOBACKUP on day: 20061119
    channel t1: no AUTOBACKUP in 7 days found
    released channel: t1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 03/19/2011 15:03:26
    RMAN-06172: no AUTOBACKUP found or specified handle is not a valid copy or piece
    RMAN>
    RMAN> RUN
    2> {
    3> ALLOCATE CHANNEL t1 DEVICE TYPE sbt
    4> PARMS 'SBT_LIBRARY=C:\WINDOWS\SYSTEM32\ORASBT.DLL';
    5> RESTORE SPFILE TO 'C:\SPFILE.TMP' FROM AUTOBACKUP MAXDAYS 7 UNTIL TIME 'SYS
    DATE-1575';
    6> }
    allocated channel: t1
    channel t1: SID=63 device type=SBT_TAPE
    channel t1: Oracle Secure Backup
    Starting restore at 19-MAR-11
    channel t1: looking for AUTOBACKUP on day: 20061125
    channel t1: looking for AUTOBACKUP on day: 20061124
    channel t1: looking for AUTOBACKUP on day: 20061123
    channel t1: looking for AUTOBACKUP on day: 20061122
    channel t1: looking for AUTOBACKUP on day: 20061121
    channel t1: looking for AUTOBACKUP on day: 20061120
    channel t1: looking for AUTOBACKUP on day: 20061119
    channel t1: no AUTOBACKUP in 7 days found
    released channel: t1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 03/19/2011 15:04:56
    RMAN-06172: no AUTOBACKUP found or specified handle is not a valid copy or piece
    RMAN>
    -----------------------------------

    Hi 845725,
    If the backups were created with OSB might be you can query the tape with obtool.
    http://www.stanford.edu/dept/itss/docs/oracle/10gR2/backup.102/b14236/obref_oba.htmTo list pieces you could use <lspiece> within obtool.
    http://www.stanford.edu/dept/itss/docs/oracle/10gR2/backup.102/b14236/obref_oba.htm#BHBBIFFEIf this works you should be able to identify the controlfile autobackup if it has the standard naming < c-dbid-date-xx > and you than know the DBID or you are able to restore a controlfile from a backup piece in the output list.
    Might be you have to install 9i or 10g rdbms software as 11g was released a year later in 2007.
    Anyway goodluck.
    Regards,
    Tycho

Maybe you are looking for