Workflow will lookup a value from one list and update to second list , in second list wants to calculate using that lookup value
Hi,
I'm Palanivel , In my site collection , I have 2 lists , In 1st list , i have id,name and Total Annual leave . In 2nd List i have ID,No of Days(taking leave),Balance Annual Leave.
My first task is,In List 2, get the value from list 1.total annual leave to list 2.balance annual leave. Next , i do some calculation ,that is (balance annual leave - no of days = balance annual leave) .
Now my updates working correctly . and the calculation also working but when next time applying leave , again the update process working , so balance annual leave becomes my total annual leave .
my question is how to do a update process only first time , next time only calculation task has to be performed .
how to do 2 task in a single workflow , the 1st task must run only one time .
please help ....
thanks in advance
Anyway-hopefully I am not talking to myself here.
The database i am using is Oracle 10 g version 1 and using vb2005 express.
As mentioned above the problem is the value of the parameter does not go into the query statement.
The same logic with changes made works for other major databases. So I do not think it is the logic.
Any suggestions?
Similar Messages
-
Selecting from one table and Update another in the same Page
Could someone help me with this HTMLDB task. In my page design, I am selecting data from two tables (masters: DEPT, EMP) which I want to display on the left column of the page and at the same time a user would be able to update another table (ATTENDANCE:with many children) which would have a radiogroup on the right side for each value of the master such as employee name. The placement of data has to appear in corresponding rows on the page. For instance, employee names of the master table must appear on the same row with its corresponding child value. The page would be grouped by DEPT_NO. The user would click on the department name, a new page with the employee name would apprar. From that page, the user would then update attendance column for each employee in that department. In this operation, it is only the ATTENDANCE table that is being updated. I can send out more information about the structure of the tables if you need more information. I tried many HTMLDB options, forms, reports, etc. I have not been able to get quite right. Your help will be appreciated.
Raju,
Thanks for responding to my problem. I have actually tried using the example on how-to you sent me a link to but it did not help as I expected. You see, the page would be updated every meeting date for each employee. I can send you more information about the table structure if you like. However, let me see if this will help you a bit.
Tables are: 1) Dept [dept_no (pk),dept_name] 2) EMP [emp_no (pk),emp_name, dept_no(fk)] 3) Meetings [meet_key(pk),attended, meeting_date, emp_no(fk)]
What I want to do is create two pages, one would list the departments, when a user selects a department, the user would be linked to a meeting attandance page. The meeting attendance page would list department name once, Meeting date once, and then list employees in that department. At the right column of every employee would be a checkbox for meeting.attended for update. The meeting_date would be pre-populated so that what the user would do is just check Yes/NO. The second page is the one I'm having the most problem with.
If I can do a fetch from dept, emp, and meetings and then do an update on the Meetings table on the same page, I think that might solve the problem. That was how I solved it in MS Access three years ago.
Here is email address in case you want to contact me directly. [email protected]
Thanks again for your help. -
How to copy value from one field to another in a Apex Form
Hello guys,
There are 2 addresses one is shipping and other is billing. I do not want the customer to re-enter all the details if it is the same address. So based upon an action, it should take the live values from one address field and populate the other address field. I know in JS you can do it, but how to implement that in Apex?
I guess using Dynamic Actions to achieve this in Version 4 but do not know how. Read quite some info but no luck.
Thanks in advance!Hi,
I have assumed that you have your shipping address at the top of the page, and then further down the page you have your billing address that you want to enable the users to copy (if this is in reverese, you will need to switch the js variables in the code following).
I would create a Select List item above the 'Billing Address' details, called PX_SAME_ADDRESSThis select list would be static, with the options Null.
I also assume you would have pairs of address page items such as:
PX_SHIPPING_ADDRESS_L1
PX_BILLING_ADDRESS_L1
PX_SHIPPING_ADDRESS_L2
PX_BILLING_ADDRESS_L2
PX_SHIPPING_POST_CODE
PX_BILLING_POST_CODEThen copy the following code into the HTML Header of the page definition:
<script language="JavaScript" type="text/javascript">
function copyAddress()
if( $x('PX_SAME_ADDRESS').value == 'YES')
$x('PX_BILLING_ADDRESS_L1').value = $x('PX_SHIPPING_ADDRESS_L1').value;
$x('PX_BILLING_ADDRESS_L2').value = $x('PX_SHIPPING_ADDRESS_L2').value;
$x('PX_BILLING_POST_CODE').value = $x('PX_SHIPPING_POST_CODE').value;
else //Clear Address Fields
$x('PX_BILLING_ADDRESS_L1').value = " ";
$x('PX_BILLING_ADDRESS_L2').value = " ";
$x('PX_BILLING_POST_CODE').value = " ";
</script>Then, in your PX_SAME_ADDRESS item, copy the code below into the Element > HTML Form Element Attributes field.
onChange="copyAddress();"Hopefully this works for you too, and should give you some basis to play around with.
Amanda. -
Move value from one listbox to another listbox
Hi,
I have two list boxes with list of values in it. Can anyone help me to move values from one listbox to another listbox on click of a button in AWT. It will be of great help if i can get any sample code.
Thanks a lot in advancehi,
do u want to move a specific item that is selected or all of the items?
anyway the logic is very simple!:)
if u want to transfer the currently selected itme form the first List box,
use the method getSelectedItem() to get the currently selected item.
then keep this value in a String variable (item)
and use getItemSelected() to get the Index of it in int.
keep this value in an int variable (index)
then delete the item from the first list using the method remove(index) on the first list object.
then add the item to the second list using
add(item) on the second list object.
hope u can work it out urself from here!
rgds
JP -
How to move value from one tlist to another tlist in same form?
how to move value from one tlist to another tlist in same form on button press?
Same like in data block wizard when we select value from 1st list it will go to 2nd list and can be move back. Please help i am new to forms .
Regardsjust call the following proc in your add & add all buttons. Reverse the code for REMOVEs
this proc will move one item at a time from list_item1 to list_item2.
PROCEDURE add_an_item
IS
v_list_count NUMBER;
v_item1_label VARCHAR2(60);
BEGIN
IF :list_item1 IS NOT NULL THEN v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF v_list_count >= 1 THEN FOR i IN 1..v_list_count
LOOP
IF :list_item1 = Get_List_Element_Value('list_item1', i)
THEN
v_item1_label := Get_List_Element_label('list_item1', i);
Add_List_Element('list_item2',1,v_item_label,:list_item1);
Delete_List_Element('list_item1',i);
Exit;
END IF;
END LOOP;
END IF;
END IF;
END;
*********************************************************************************this proc will move all items from list_item1 to list_item2.
PROCEDURE add_all_items
IS
v_list_count NUMBER;
v_item_label VARCHAR2(60);
v_item_value VARCHAR2(60);
BEGIN
v_list_count := nvl(Get_List_Element_Count('list_item1'),0);
IF v_list_count = 1 AND Get_List_Element_Value('list_item1', 1) IS NULL THEN NULL;
ELSIF v_list_count >= 1 THEN
FOR i IN 1..v_list_count
LOOP
v_item_value := Get_List_Element_Value('list_item1', i);
v_item_label := Get_List_Element_label('list_item1', i);
Add_List_Element('list_item2',i,v_item_label,v_item_value);
END LOOP;
clear_list('list_item1');
END IF;
END;I added [ code ] tags to make this easier to read.
Message was edited by:
Jan Carlin -
Im new to Sharepoint.
I need to know , how to fetch the x1 , x2 values from one form to another form x1, x2 fields, this wants to happen when 2 forms ID fields(Drop down field) are same.
ex:
first module I have 3 fields like, "Marketing ID" , "Company name" , "Vendor name".
second module I have the same related fields like "Marketing ID" , "Company name" , "Vendor name" and some more fields.
now i need to fetch the information from 1st module to 2nd module ( "Company name" , "Vendor name" ) when I select the Marketing Id(Drop down - field)
it should be want to show in Calculated columns.
Can someone make a suggestion on how I can do this.
Thank you so much for any help you may be able to provide.
Sincerely
Ahalya BabuCalculated Columns can only generate a value from fields of the current item. And only some types of fields (for example, it can't use a lookup column).
Consider using a workflow to accomplish your goal.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
How to get a value from one item into another
How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael -
How we can get the values from one screen to another screen?
hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).
-
I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!? -
Passing the values from one pgm to another pgm (Calling pgm has no sel scr)
Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.RExport your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'. -
How to change the value from one input control to another input control?
Hi Experts,
I want to change the value from one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
Here I attached screen shot.Please help me for thisHi,
It is not possible to have Input controll in all tabs that will be set from another .
But There is one workaround .
Follow the link below .
http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/ -
Pass variable value from one dashboard to another dashboard
Hello,
I have one main dashboard which have "year" prompt with drop down and variaous links & also some reports.
And we have same year prompt on another dashboards only difference is, this prompt is editable not drop down.
The requirement is, when I navigate from main dashboard to another dashboard through reports, that time selected prompt value
comes in navigated dashboard prompt.
But When I navigate from main dashboard to another dashboard using Link or using <A Href> tag, now selected prompt value can not come in navigated dashboard prompt.
How can we pass selected prompt value from one dashboard to another dashboard? OR Is there any other technique?
Thanks,
PradipHi,
You need to make the scope of the prompt as 'Dashboard' and if this doesnt work.
Then use presentation variable in the first prompt and pass it to the second prompt.
So this will surely pass the values across pages.
Regards
MuRam
NOTE: Please mention if this resolved your problem/still facing and close the thread. -
How to pass value from one method to another method
Hi all,
I have created a funtion module and i am calling this function module inside a method and it is exporting some value in a table, now i have to pass table value to another method where i have do some thing based upon this values.
I think there a marco available to move the values from one method to another method.
Please help me in this issue.
Regards
Balaji E.Hi,
Let me make certain assumptions!
Method 1 - You export the table values
Method 2 - The method where you need the table values
Once you create a method from a function module which has tables as one of the export parameters then the code automatically puts in the macro code which looks like : SWC_SET_TABLE CONTAINER 'Table' TABLE.
The 'Table' in the above code is the container element which is created by the workflow once you use this method and the TABLE (The table that gets filled in the function module) is the variable to code automatically created.
Now you can use the other function module in the workflow as a background step and pass the values from the 'Table' container to this method using the binding. When you use this then the method automatically has the macro SWC_GET_TABLE CONTAINER 'Table' ITABLE. Here the 'Table' is the same container table you used in the binding and the ITABLE would be the variable you can use in the other function module.
Hope this helps,
Sudhi -
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
Copying value from one cursor to another
Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
temp_cursor types.ref_cursor;
wip_rec types.ref_cursor;
BEGIN
DECLARE
CURSOR temp_cursor IS
SELECT ...........
END;
BEGIN
FOR wip_rec IN temp_cursor
LOOP
update tinsagr set something
where {the condition}
IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
Fetch wip_rec into TransactionResultSet;
END IF;
END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2 rc sys_refcursor;
3 v_ename emp.ename%TYPE;
4 v_dept emp.deptno%TYPE;
5 ---End Of Local Varriable Declaration
6 --Procedire declaration !
7 PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8 emp_rec emp_tbl;
9 BEGIN
10 /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11 with some simple modification, Here I have used implicit cursor! */
12 SELECT emp_obj(ename, deptno) --Casting as the object
13 BULK COLLECT
14 INTO emp_rec
15 FROM emp
16 WHERE deptno = 10;
17
18 dbms_output.put_line('Records selected are:');
19 FOR i in 1 .. emp_rec.COUNT LOOP
20 dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21 END LOOP;
22 --Now we are filtering the record and may be doing some operation with each record.
23 FOR i in 1 .. emp_rec.COUNT LOOP
24 IF emp_rec(i).ename = 'KING' THEN
25 --You can change this IF according to your need.
26 emp_rec.DELETE(i);
27 END IF;
28 END LOOP;
29 OPEN pi_out_ref_cur FOR
30 SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31 END TEST_CUR;
32 /* Main execution or procedure calling section*/
33 BEGIN
34 --Actual calling
35 TEST_CUR(rc);
36 dbms_output.new_line;
37 dbms_output.put_line('Now in Ref Cursor');
38 dbms_output.put_line('****************');
39 LOOP
40 FETCH rc
41 INTO v_ename, v_dept;
42 dbms_output.put_line(v_ename || '--' || v_dept);
43 EXIT WHEN rc%NOTFOUND;
44 END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>
Maybe you are looking for
-
Wiki server sometimes doesn't save messages in e-mail backlog
When you have a wiki set up with a mail-group service, it gives you a very nice and convenient backlog of the messages. However, sometimes it inexplicably only saves the title of the message and discards the body. I haven't managed to figure out why
-
How do you access data on a Time Machine backup for a different computer?
The hard disk on my daughter's computer is having problems - it may be broken. If so, it may take a while to get the computer working again. The information on the disk has been backed up to our Time Capsule using Time Machine. I can see the backup
-
VIs for Agilent 33250A (function generator) and SR-844 (lock-in)
I am new to Labview. I was unable to find VIs for Agilent 33250A (function generator) and SR-844 (lock-in). Can someone help me find these? Solved! Go to Solution.
-
Reschedule Excel or PDF instance fails with CAST error in CRS 2008
Rescheduling an Excel or PDF Instance in Crystal Reports Server 2008 gives error message when trying to set parameters. "An error has occurred:Unable to cast object of type 'CrystalDecisions.Enterprise.Desktop.Pdf' to type 'BusinessObjects.Enterpris
-
Error while executing JAX-RPC client
Hi, I am trying to run examples of Java Webservices Nutshell. but while running the clinet part using "ant generate-clinet" it is giving me following msg and not generating any artifacts. [exec] The filename, directory name, or volume label syntax is