Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?
working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?
Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's
Similar Messages
-
Sharing a hard drive between two Macs with Time Machine
can I use the same hard drive to back up two different Macs with Time machine? I'm ok with hot swapping the cables.
Message was edited by: Brian MonsonBrian Monson wrote:
can I use the same hard drive to back up two different Macs with Time machine? I'm ok with hot swapping the cables.
Yes, but TM, Leopard and external drives are not OK with hot-swapping. Never unplug a drive without properly ejecting it first.
Each computer will have it's own backup folder on the drive and each computer will recognize its own backup folder. There is no limit other than HD space on how many computers can be backed up on an external drive. -
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?
Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/ -
Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.
-
I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?
bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list. -
I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
I want to keep the backups on it and not erase and start over.
Thank you in advance.
GregorIt sounds like something went wrong with the drive. Did you drop it? How long has it been sitting around unused?
-
Choosing Hard Drives to be Backup with Time Machine
i am using Time Machine to Backup my System Hard Drive and a 2nd Internal drive to an external drive. Recently i installed a 1 TB drive in my Mac Pro, and am wondering how i ensure that the data on the new drive is included in the Time Machine backups.
I would like to backup the data on all three of my drives to one external Backup disk.Robs HD wrote:
None of my Hard Drives, excluding the Backup disk are on the TM exclusion list.
i have tried adding them to the list and then removing them.
Should i try deleting the Time Machine preference files?
No need to do so. If, while connected to your Mac, the drives do NOT appear in the exclusion list in the TM Prefs then everything will be backed up. -
Can I install a 1 terabite hard drive and update it with time machine?
What would I need to do? I have a 250 gig hard drive now, I would like to install a 1 terabite. Would I need to install the os then update it with the time machine backup to have everything that I have now? I have a MacBook Pro 13 inch with OSX Snow leapord. I had gotten this notebook mid summer of 2010. Any comment would be appreicated.
Right now, I have a 320 gig hhd that I use for my time machine backup, I recently backed up my notebook, if I decide to upgrade the hhd to a 1 tera, I will get another 1 terahhd for time machine backup. I just wanted to know if I could change the hhd, install the os and instead of installing all the drivers, music, movies that I purchased, if time machine backup would do that for me. Thank you for your comment OGELTHORPE!
-
Unlocking external hard drive that was locked with time machine
I use a MBP Retina (Mid 2012) with OSX 10.9.4. I left the MBP at Apple for repair and they changed the mother card and reformatted my HD (SSD). Since I had a backup on a WD My Passport external drive I was not too worried to restore. I had clicked the option "password protected" on TM and therefore the external HD was password protected. I also copied pasted many files on the same external hard drive, in case TM would fail one day to operate I thought that I would still have my files ...
But I was very surprised that when I plugged in my external HD into my MBP it didn't recognize it at all. The external HD did not appear on the screen anymore. Nor in Finder. It appeared in Disk Utility but it could not be mounted. Basically it was impossible to access my data. After a while and talking with Apple Support on the phone we could reach a point where a window appeared asking me the password for the access to the HD. Unfortunately it didn't work. The . password was not recognized. Even though we had selected the right country with the icon upper right on the screen to make sure that we used the correct keyboard.
So finally I reinstalled completely the OSX (coming rom Lion all the way to the last OSX) on the MBP and finally I could restore it with my TM. I spent three days on this since it only worked with one OSX - don't remember honestly which one - and not the last one. Don't know why.
Anyway.
Today I have my MPB working but I miss all the files that are still on my external HD because I cannot access to it anymore. As I said the recovery happened all of a sudden with TM with a former OSX and not the 10.9.4. With this current OSX my HD does not appear on the desktop nor on finder. Nothing. It is locked by TM and I cannot even key in the password to unlock it. Useless to say that I have the password.
Any idea how to sort this out please ? ThanksThis might work. Courtesty of V.K.:
run the following terminal commands (copy and paste, please)
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
you'll have to enter your admin password (which you won't see). that's normal. this should unlock your drives. -
New Hard Drive Won't Recognize My Time Machine Backup
I maxed out the space on my MacBook hard drive, so I bought a new 1TB hard drive to replace it. (I keep a TIme Machine backup of my computer on a external Passport) I installed the new hard drive, loaded up Snow Leopard and then it did the whole "Welcome" thing and asked if I wanted to set up the new hard drive. I went through the process and it asked if I wanted to transfer information to the new hard drive. I selected "transfer information from a Time Machine Backup" but when I hit "continue", it doesn't show my Passport, only "Macintosh HD". It's weird. I tried plugging the Passport into a different computer in the house, and it shows up fine.
I'm dead in the water right now. I have a new hard drive in my laptop with OS loaded on it, but no way to transfer my data from my Time Machine Backup to it! Any ideas why it won't show the Passport Drive?
Thanks - I'm really stuck right now.Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238 -
Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore that I did was in march and the latest backup was in may....the reason being is that there were app that i had downloaded that are in my most recent back-up, that were not in the backup I restored to. Is it possible to just restore one application ie)itunes?
See this post.
tt2 -
I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup." -
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?
I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive.
Maybe you are looking for
-
New features in Exchange 2013 that can help speed recovery ?
What new features are available in Exchange 2013 to help speed data recovery ? anything change to the architecture which means it is no longer needed to restore mailboxes and replay logs prior to restoring data ?
-
I am a graduate student and teacher and have thousands of PDFs to read each semester for my classes and research. I looked into every eReader on the market for months before buying a Sony PRS900 (I would have gone with the 950, but couldn't fund the
-
Configuration file bc4j.xcfg not found. Old pages work, new ones don't.
, I've spent way to much time already trying to troubleshoot this problem. Simply put, everything works fine on JDeveloper 9.0.3. The same application can Not view anything on JDeveloper 9.0.2 I'm deploying the application to Oracle9ias 9.0.3 and I c
-
Yahoo toolbar bookmarks missing version 36
For people missing their bookmarks on the latest version of yahoo toolbar , I actually received a response from Yahoo today. "Hi , We are aware that some users are unable to access their bookmarks in the Yahoo Toolbar. Our engineers are working on a
-
Mac Pro with Second HD for Win and Mac
Hello Everyone, I just purchased a new Mac Pro 3.2 Ghz. I have two 500 GB HDs. One is partitioned for Mac OS X and Windows Vista 64. The second HD I want to use as storage for both Mac OS X and Windows and be able to share files. Everyone I talked to