Working with BC-sets

Hi there ,
Can any one please tell me that how do we work with BC sets & how can we use that to migrate the data from one system to other system....
Regards
Kaushik

Pls go through this document.it is very useful
http://help.sap.com/saphelp_46c/helpdata/en/d2/a22237406d183fe10000009b38f889/frameset.htm
http://sapabaplive.blogspot.com/2007/12/create-bc-set-from-transport-request.html
if it is useful reward some points

Similar Messages

Quickpaint reports not working with assignment set defined with criteria

Hello,
I have a problem with quickpaint reports in HRMS. When i run quickpaint report against assignment set defined with criteria it reports following error: APP-PAY-06867 An error occurred during formula execution FFX00_DATA_NOT_FOUND (assignment criteria was &ASG_LOCATION=New York).I defined several assignment sets with different criteria and i always get the same error when i run any quickpaint report.
The same Quickpaint report works well with assignment set defined by including individual assignment.
Thanks in advance!
best regards

Thanks for uploading the sample reports.
I am not abe to reproduce the issue and the graphs generated in both the attached reports are the same except that the width of the graphs being displayed are different as seen in the below images.
ATML 5.1 Report Graph
XML Report Graph
Regards
Srivinayaka Pandurangan
National Instruments
With Best Regards,
Srivinayaka
National Instruments

Working with Data Sets

Hello,
First I am using Dreamweaver CS4 and working with the built in data table templates. I am using the spotlight with detail area option. I have it working fine and the data displays correctly. However there are no labels generated with the data. An example is a phone number shows as 123-456-7890 just as it is in the data table, but I would like a label for that field to show the output as Cell Phone: 123-456-7890.
Any help would be greatly appreciated. I know I am probably missing something rather simple.
MJMolloy01

Well, I figured the solution out myself. I guess a little peace and quite will always help work through the issue. I found that if I go into code mode and insert a label tag in front of the dynamic data it works fine.
If there is an easier way of doing this feel free to explain.
Thanks,
MJMolloy01

Bookmark sync not working with large set and maybe javascript bookmark bookmarklets??

Bookmark sync via iCloud doesn't seem to work for me. I use Chrome as my primary browser but keep a huge set of bookmarks synced to Safari via Xmarks.
Basically I either get no bookmarks on my iOS devices (iPhone 4 and iPad 1) or a huge number of repeated versions of 1Password's very large java bookmark.
I've tested by deleting all my Safari bookmarks and starting with a clean Mac. When I do this everything works and changes on any device propagate to the others.
As soon as I bring in my big bookmark set from Xmarks, it all breaks.
Do I need to perform the bookmark clean up I've been putting off for a decade or so?

Can't help with your bidirectional bookmark syncing question but try this for backing up your touch's bookmarks.
Export/backup all of your Safari/Internet Explorer bookmarks (depending on where you're syncing them from) and keep them is a safe place. This is your master bookmarks list. Then delete all bookmarks/folders from your browser. Now sync your bookmarks with the touch with the following iTunes settings:
Under your touch's 'Info' tab, select the checkbox 'Sync bookmarks with Internet Explorer/Safari'.
After syncing, your touch's bookmarks (and only those from your touch) will be synced to your browser. Now export/backup these bookmarks...these are your touch's bookmarks. Now you have a both a backup of your master bookmarks and your touch's bookmarks. When you want to sync/restore your touch's bookmarks back to the touch, delete all your PC browser's bookmarks and import the touch bookmarks:
Under iTunes/your touch/'Info'/Web browser & Advanaced, select the checkboxes 'sync bookmarks with IE/Safari' and 'Replace information on this iPod: Bookmarks' and sync again.
This will transfer your touch's bookmarks back to the touch. Now delete all bookmarks again from IE/Safari and re-import your master bookmarks. Note that after importing them back in, they will likely be in alphabetical order rather than the date added order.
Also note that (at least in Windows) your browser needs to be open for bookmark syncing to take place.

Issue working with page sets

Hi all
I've been trying to solve the following issue without much luck:
I need to set up a form that has different master pages according to how many pages it has(ie: the first page has a header, the last page has a footer, and if there's only one page it has both the header and the footer)
I've been trying to solve this problem using page sets, but unfortunately I haven't had much luck in defining which page set is used in which situation.
Any help pointing me in the right direction or towards an article discussing this would be greatly appreciated, as I have been unable to find anything useful regarding this issue.
Regards
Ross Malan

HI Steve,
I tested with the WPF client 6.1.3.X.
I was getting a different error with the host name "Connect to server myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
This has solved the issue and the WPF client is up and running.
Thanks for the help
Regards
Neha Mahanty

Working With Version Sets

As I explore this feature of PSE8, I would need assistance.
My original is a JPEG, which I edited in Editor. Because of the operations I performed in Editor, PSE's default filetype in saving to a version set is a ,psd.
So now I have the original JPEG along with the edited PSD version. However I need the image to be ultimately in JPEG format.
Here's the question:
Should I have converted the edited photo to a JPEG when saving it's version set, or am I better off keeping the edited version in PSD. If the latter, then what's the quick way to convert the edited PSD version to the final JPEG? Must I return the PSD back to Editor and do another "Save As" or can I convert the filetype from within Organizer?
Thank you for any help!

You can do either...
You could go back to the Editor, open your PSD, and then do a Save As and set the format to JPEG.
or
In the Organizer, you could select the PSD, and then do a File->Export as New File(s)
Follow the instructions and you can create a JPEG.
Cheers
Bob

Select formula works with one set of data but not another??

Post Author: rkckjk
CA Forum: Formula
I have the folloing Select formula:{Sheet1_.Assign Group History} = '{"COMPUTER OPERATIONS"}' and{Sheet1_.Resolved By Group} = "COMPUTER OPERATIONS"That I'm using to select records from an Excel spreadsheet. It works fine with the Jan. 2008 spreadsheet file: Test MTTR Jan 2008.xlsbut not with the Feb. 2008 spreadsheet: Test MTTR Feb 2008.xlsWhen I use the Feb. 2008 file I get this error:"Query Engine Error:'Error code: 0x800a06ff Source: DAO.Recordset Description: this expression is typed incorrectly, or it is too complex to be evaluated."Basically both Excel files are in the same format but have different data in them. I don't understand why Jan's works, but not Feb's???
Since, I can't upload the two files without contacting the system administrator, maybe someone can help me debug the error code or how to debug this error using another method or idea??

Post Author: sharonmtowler
CA Forum: Formula
did you try each sheet while removing one of the select statements? i would start there and try feb with no select statement, add one in, then the next
see what is causing your problem. it sounds like some data in the xls file is in an incorrect format.

Can't get anything to work with printer set up

Hi,
I just purchased the Airport Extreme earlier this week and I am trying to set up my HP Deskjet 3930. Unfortunatley, I am really confused. I currently have the printer connected to my PC, which runs on Windows XP, through the USB port. I also have a MacBook, which I also just purchased last week.
When I hook it up the printer up to Airport Extreme, nothing happens. Bonjour is downloaded on my PC, but how do you manually start it up if nothing appears when you plug your printed into the Airport Extreme?
Also, there is no Printer Setup Utility option on the MacBook. None of the insturctions that I followed in the handbook have helped. Any suggestions?

This means this printer does not support USB network printing.
Further checking shows this printer uses (Lightweight Imaging Device Interface) LIDIL for printing. A few years back, HP, in order to save cost, produced a number of printers without any CPU inside, all the controls are host-based, and require a direct USB connection to the computer.
The only way to network this printer is to connect to an OS like WIndows or OS X and use the printer sharing function from the OS.

Working with result set i need a solution..... plz treat it as urgent

i have a query which returns 12 records so the result set contains 12...
now i want to display in the set of 5 rows... so
out put must me
Name Rate Name Rate Name Rate
1 6 11
2 7 12
3 8
4 9
5 10
how can i achieve this output...
I guess this will clear the question......

You create a for loop that indexes from 1 to 5. You get a row(item) from the result each time through the loop. You all check next() and break out of the loop when it returns false.

Working With A Result Set

Hi Everybody,
I'm working on a application with will retrive data from a database for the past seven days, and then find the average for each of the days, the database is basically (id,date,hour,houraverage) - I can connect to the databse okay, but the problem i have is working with result set:
ResultSet rs = d.PerformQuery("0");
while (rs.next())
if (firsttime)
recorddate = rs.getString(2);
firsttime = false;
System.out.println("First Time");
numberofdays = 1;
if (!firsttime)
if (recorddate == rs.getString(2))
System.out.println(" Not First Time");
thisdaystotal = thisdaystotal + Float.parseFloat(rs.getString(4));
numberofrecords = numberofrecords + 1;
System.out.println(thisdaysaverage);
System.out.println(rs.getString(2));
if (recorddate != rs.getString(2))
thisdaystotal = thisdaystotal + Float.parseFloat(rs.getString(4));
numberofdays = numberofdays + 1;
thisdaysaverage = thisdaysaverage / numberofrecords;
recorddate = rs.getString(2);
for (int dayssofar=1;dayssofar<=numberofdays;dayssofar++)
System.out.println("Daily Average: " + dailyaverages[dayssofar]);
Basiclly the flaw in the program is that it can't tell if a record has the same date as the records before it - It can tell if they are different but not same, can anybody see any flaws in the logic?
Andrew

Why don't you try to use SQL to get what you need. For example, you can use:
SELECT DATE, AVG(HOURAVERAGE)
FROM TableName
WHERE DATE > 'DATE1'
GROUP BY DATE
(replace 'DATE1' with your specific date. If you are using Oracle replace it with: trunc(sysdate) -7 to get most recent 7 days).
Then you will get your averge values. There is no need to average them in your Java program.

My line doesn't work with BT HH3 but does with BT ...

Hi folks,
To cut a long story short, I've had a selection of BT HomeHubs over the years and my HH2 packed up 3-4 months ago, not sure what went wrong but the orange light just kept flashing and it would not connect, despite resets and reboots.
I think the most my line can take is around 7MB but BT support say it can take 24MB, but I'm not on inifinity, just normal ADSL over copper. I know they have upgraded my local exchange several months ago and this is when the problems started as even before my HH2 packed up, my speed dropped right down to around 1MB for several weeks.
Anyhow, as I am still in contract (due for renewal in April 2012), BT sent me a HH3 and I've had a variety of problems with it, so much so that they actually sent me 3, all with the same problems (which makes me think a network/exchange issue).
Basically, the HH3 used to connect and over a period of say 2 days it went from around 7MB upto 11MB, at which point, I boot up my PC (Windows 7 64-bit connected via ethernet) and I see a yellow exclamation on the network, reporting no internet. Sure enough, I cannot browse so have to re-set the hub, now sometimes it synced slightly lower but I generally had to reboot 5-6 times for it to sync around 6mb, then I could sometimes connect, but of course, the speed increased every few hours, or at least when i checked the next day it was sitting around 11MB.
Now this did not seem to affect my wireless laptop, this continued to work but ethernet was not happy. All of my hardware is OK, I even tried different ethernet cards, cables etc to no avail.
I have cases raised with BT and whilst they do their best to try and resolve the issue, I get empty promises of proposed solutions within a few days. An engineer has visited my property several times and has reported everything is as it should be.
It has been driving me mad so I managed to get hold of a used HH2 and guess what, plugged it in and straight away it has worked and so far (6 days) have not had one problem.
What do I do if this one packs up because at the moment, it looks as if it is only the HH2 that works with my set-up (main PC anyhow). Do BT still stock and ship the HH2 devices?
I don't think I will be renewing in April 2012 if I am stuck on using the old HH2 and for how long this will work, I don't know. There appears to be no logical explanation, at least from BT support, why the HH3 is causing me so many problems. They say it is a problem with my PC and I need to take it to a PC specialist but clearly, the HH2 works just fine, as did a netgear one I tested a few weeks back.

is the driver for your network card up to date? that could be a reason it will not work with the more up to date HH3
If want more assistance from the forum members please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

IMessage does not work with wifi

My iMessage feature on Iphone 5 does not work with wifi setting... I have to turn DATA on for any messages to be received or sent! I've noticed others with same problem...any fixes yet? I've updated iOS, etc...

It works with WiFi & 3G.
Look at iOS 5: iMessage
http://gigaom.com/apple/ios-5-imessage/
 Cheers, Tom

Being new to working with Mac, I was wondering if anyone can tell me how to set my Mac Book Pro wirelessly to the Canon Pixma Pro9000 Mark ll? My husband had gotten this printer and the sales person said that it can be set up wirelessly to my Mac Book Pro

Being new to working with a Mac, I was wondering if anyone can tell me step, by step on how to set up my Mac Book Pro(Mid 2012) wirelessly to a Canon Pixma Pro9000 Mark ll that my husband had gotten me? Sales person told him that it's compatiable to my Mac Book Pro, Mtn Lion, but I do not see it and I don't see how to do it wirelessly. Any help would be appreciated. Thanks ;o)

Hello:
There is nothing wrong with asking questions. There are no dumb questions....answers, yes, but not questions.
If you set up your wi-fi router to establish a network, then both your printer and MacBook Pro will connect wirelessly. *** I do not know what kind of router you possess, I don't want to suggest things that might not be relevant.
Barry
P.S. No need to apologize! Most of the people here (none of us are Apple employees) enjoy trying to help others.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

How can I use dns-sd to set up a priner to work with AirPrint?

How can I use dns-sd to set up a priner to work with AirPrint?
The priner is an HP LaserJet 1200 connected to the network with an HP JetDirect.

Some of the third-party apps like "handyPrint" are able to configre the HP JetDirect to work with AirPrint.
I am trying to work up my own solution.
SyBB

Working with BC-sets

Similar Messages

Maybe you are looking for