Working with Binary data from the Gpib Read Function
I m using the gpib read command to recieve data from a gpib instrument. I already know the form of the binary data being sent back. I have programmed it in matlab before. I am haveing trouble parseing out the binary data I recieve. the basic form of the data is
#I immediately followed by 401 64 bit ieee floating point numbers. When I programmed this in matlab the code I used was of the form:
[a,count,msg]=fread(g2,2,'int8');
[a,count,msg]=fread(g2,401,'float64');
for those that don't know matlab code the command reads data from the instrument pointed to by the g2 handle. the number after the g2 above speicifies the number of values to read. And the last part the string in qoute specifies the way the binary data
is to be interepeted. the output arguments a count and msg are
a-your data
count-number of items succesfully read in
msg-error message
In the above two lines I use the variable a twice to capture the data. The first time a is set equal to '#I' everything inside the qoutes. The second time a is set equal to the actual data, in this case 401 64bit floating point numbers. I m convince that the flatten to string and unflatten from string function are the set meant to accomplish this task. But I haven't been able to find a good example of how to use these functions. Especially with an array.
Can some one please help me?
Thanks
Scourched
I'm pretty sure what you're describing is a simple typecast in LabVIEW. You will want to strip off the #I first, using string manipulation functions. Then, you can wire the string into a "typecast" VI, and wire a double precision float constant to the top connector of the typecast (this tells the VI that you expect a 64 bit float output) and then you can read your resulting array of double precision floats on the output of the typecast. The typecast VI is found in All Functions >> Advanced >> Data Manipulation.
I've attached an example in LabVIEW 7.0 and also 7.1 format.
Scott B.
Applications Engineer
National Instruments
Attachments:
typecast.vi 11 KB
typecast.vi 13 KB
Similar Messages
-
I know that usually all manipulations with CF data are
processed NOT in binary mode.
However, how to make the following then:
I create merger component, that would merge several files
together and unmerge specific file from binary field. Client asked
NOT to use zip, but make things simpler and faster and just merge
several files together.
So i've decided to use such format inside binary field
[file_1_name, 256bytes][file_1_size, 4 bytes][file_1_body,
<= 2^32 bytes]
[file_N_name, 256bytes][file_N_size, 4 bytes][file_N_body,
<= 2^32 bytes]
So - i need to be able to write EXACTLY N bytes into some
field. How do I accomplish this in CF? Indeed internally it seems
to work with strings and makes binary conversion only in the end,
with something like ToBinary() function...
P.S. As 'savour' variant, I could try zip compression with
level=0 :) Hope it's VERY fast.
I will try to persuade client NOT to use something like this,
but zip. However, I'd really like to hear the answer to my question
- for understanding.Hi
Not sure you can modify the server names but u can remove non used entries in p986115 -
Disabling the keyboard to read the data from the Barcode reader
Hi all,
This is one of the problem which is going around the forum since long time with out any solution . By doing the research i found out that the PJC can be used to slove the problem. One of my client wants to stop the usage of the keyboard where ever the data is getting populated using the bar code scanner(so as to eradicate the Frauduant entries) . Currently we are using Forms 6i version. With in a couple of months we want to move on to the Developer Suite 10g. If some one has solved this problem, Pls let me know the solution .
Regards,
Alok DubeyThank you for your reply. The issue here is user needs to enter some of the data using the keyboard. For example, We have supplied the Employee ids to the employees. Here the For the sake of having the stationary, the user will scan the employee id and enters the details like what are the stationary he requires. Now in the place of scanning, employee id can be entered manually now. I want to stop that manual feeding of employee ids. If key board locking is the solution , then please let me how it can be implemented.
Regards,
Alok Dubey -
How do I get an app to reinstall with no data from the first time?
Basically, I just want to restart the game, but when I reinstall it, the button doesn't say install, it is an cloud with a down arrow inside.
Thanks guys!Hi, if the App is in the Dock, right click, choose Options>Open at login.
Or System Preferences>Accounts>Login Items window, drag the App there or click on the tiny plus icon to add it. -
Why can't i work with screenshot's from the iPad?
How is it that i can't use screenshots made with my iPad?
I can open them and modyfi them in the program but when i want to save or export them i just get the messege that they are not compatible...It's already when i finish a project,when i hit the back arrow in the upper left corner and it ask's me if i want to save,i do so and then the image didn't appear just a grey X instead and it tells me that this file is not a photoshop file...
And now it's not only screenshots,it marks everything like that... -
This VI collects analog voltage over time. I am currently using 1 Channel and N Samples. Using the Write to Measurement File.vi, I can view the .lvm data nicely in Excel, with time in the first column and voltage in the second column. However I would like the data in an array, with time and voltage, that I can work with and not just in .lvm format, like wiring it to the Write to Spreadsheet.vi. When I wire the data from the DAQmx read VI to Write to Spreadsheet.vi, only one voltage value is listed. I have tried the Build Array function but it just lists voltages across the first row (I want them in 2 columns), and it doesn't list all of them either.
Attachments:
doorbell voltage.vi 108 KBHi,
Daqmx gives only the channel data and not the time stamp. Its the LVM file driver that generates the time stamp based on the input data.
Just generate the time stamp and append it to output of the Daqmx and write a spreadsheet string to an ASCII file.
Post back for queries.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved. -
The data from the infoprovider involved could not be checked'
Hi all,
In the the selection screen of the virtual provider through the option display data, am getting message text " the data from the infoprovider involved could not be checked" , and then it brings all the data from the r/3 function module irrespective of the selection by date in the virtual info provider. I am retrieving the data from r/3 function module(RFC) to bw function module assign to virtual infoprovider.
with regards,
RamHi
A Virtual Provider does not store data. to view the data in it you will have to use it in a query and check its data.
Thanks,
Rajesh.
Please provide points to answers if you find them helpful -
I am having trouble updating minomonsters and I would like to find a way to fix it without erasing all of my data from the app.
I am having trouble updating minomonsters and I would like to find a way to fix it without erasing all of my data from the app.
-
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
Why is performance so slow reading binary data from a SQL Azure DB with EF6.x
I'm running a WPF client that hits a SQL Azure DB using EF 6.x. For the most part, everything seems to be working fine. The one exception is when I try to read a large binary column.
I am storing files in the DB as a binary column. When I test using the local DB, everything sings. When I switch to the Azure DB, I get timeouts when I try to read the file contents. I have no problem saving the binary data to the DB, just
reading it.
I don't know how to troubleshoot this. I looked at the Query Performance page in the Azure portal, but it doesn't time stamp anything in there and you can't clear it, so I can't correlate what's running with the queries that show up there.
I tried to start SQL profiler against the DB, but was denied because I'm not a member of the sysadmin fixed server role.
If I query for the data directly, it comes back quickly. So this seems to be an Azure via EF issue.
Any help is appreciated.
http://digitalcamel.blogspot.com/Hi Digital Camel,
Since I don't know what your scenario is, I won't argue too much about not storing binaries in your SQL DB, but still: don't store binaries in your SQL DB :). The main reason is simple: first and foremost, in both the current and future pricing tier your
levels are defines on the size of the DB. Basically, you pay way more by storing your binaries on your SQL layer rathern than storing them elsewhere, such as Azure Storage. Second, the protocol your binaries would be downloaded over the wire is prone to network
connectivity issues: you could use HTTP(S) or FTP instead, if you'd use Azure Storage. Last but not least, when you download the binary from your DB, you keep a connection open which in the end is a connection other users might have used to query data instead.
However, in regard to your question, how did you "query for the data directly"? Did you try to query the data using SSMS with the Client Statistics option on? This could tell you if the problem is network, server or client related.
Hope this helps!
Alex -
Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.comhi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to export some data from the tables of an owner with integrity?
Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
The attempt to read data from the server failed
Today I was looking into an error with several IMAP accounts in Apple Mail:
+The attempt to read data from the server "<<servername.tld>>" failed.+
At first I thought this was an Apple Mail problem, as the accounts in question seemed to work just fine when not used in combination. One possible answer to this problem is rather short:
Apple Mail uses IMAP caching, which uses more than 4 connections at the same time to the mail server. Some mail servers (like courier-imap in its default configuration) do not allow that much connections from the same IP address. The more accounts you are trying to connect to at the same time raises this number of connections. Meaning while you could probably check one account for new mails, the second will ultimately fail for no obvious reasons. The only solution to this problem is to raise the connections allowed by your IMAP server software. this solution only applies to people who have root access to their mail server.
in courier-imap you have to edit /etc/courier-imap/imapd
and change MAXPERIP=4 to a higher number (5 to 10 times the number of accounts you want to check simultaneously)
and change MAXDAEMONS=40 to a higher number (with only one user 200 might work, whereas if you serve multiple users, something like 500 or higher might be better suited).
of course increasing the numbers increases load on your server. this is why there are these restrictions in place.MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue. -
Send data from GPIB Read Function to XY Graph
hello
I'm really new to LabVIEW so this is probably an easy one, but I'm having a serious issue trying to figure this one out. how do I send data from GPIB Read Function to a graph, let's say XY Graph. my data consists of a string of numbers, separated by commas, alternating between X and Y values. for instance:
0, 0, 0.1, 0.2, 0.2, 0.4, 0.3, 0.9, 0.4, 1.6, 0.5, 2.5, 0.6, 3.6, 0.7, 4.9
which would graph a parabola. I tried to connect the output (data) of BPIB Read Function to XY Graph, but I get an error. do I have to do something else before I send that data to the XY Graph? thanks for any suggestions.
r.
Solved!
Go to Solution.first of all, thanks a bunch for replying
I added "spreadsheet string to array function" and it looked OK (I didn't connect anything to 'array type' because I couldn't figure out what those blocks were - I'm really new to LabVIEW"
I couldn't find "decimate array" so I added "decimate 1D array," which is what my labVIEW listed (I have 8.6). I fed that directly into "express XY Graph," which lets me feed separate X and Y values (or so I assume). but, even though the input to "decimate 1D array" and output of "spreadsheet string to array function" say 'array' - the program is not happy. when I move my mouse over the 'x', the following is the message that I get:
"you have connected two arrays of different dimensions.
The dimension of is 2.
The dimension of is 1."
I'm not quite sure what that means. any suggestions what I can do with it?
Attachments:
Picture 1.png 11 KB -
Server error: "The attempt to read data from the server '(null)' failed"
Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.
Maybe you are looking for
-
I have a new PowerBook Pro with Windows & Parallels. Somehow, I have reduced the size of my Mac screen. There are black strips on either side of the blue desktop. How do I get it back to full size? Thanks. Lynn
-
How do I export Premier Pro CS6 files for use with Final Cut Pro?
In my cloud version of CS-6, I am trying to export or convert my finished work and take to my co-editor that uses Final Cut Pro. In "export" on my PrP file, I have the option to export as FCP "with notes." When I do that, and look at the notes, they
-
Roles In SAP Web AS ABAP would not appear automatically in J2EE Engine
I have an ABAP+Java Addin Instance Installed. When I create a user, it shows up in the Jave Engine when I goto Services->Security Provider. But the ABAP roles would not show up in the Java Engine. Please advise..
-
Skype sent a password and it did NOT arrive in my email
You said you sent the password and it did NOT arrive--twice that happened! My email is typed correctly -- so how do I get to reset my password?
-
Output Difference in different Production system. Urgent
Hello All, In the development system we have screen exit in QM02/QM01 with two block b1 and b2. This is transported to several production systems. Now the problem is : In some systems it is working good. But in few only one block is displayed. Pleas