Working with data navigation controls

Hi Experts,
I am developing an add-on and chose to create and register it as user-defined object in Business One as document type. I have managed to utilized its features. However, I am unsuccessful in making the data navigation controls work (next, previous, first, and last record).
Hope somebody could shed some light on how to properly do it.
Thanks.

Hello
If you using UDO, and building your form based on UDO type the navigation buttons working automatically
same code for building your form.
Dim oForm As SAPbouiCOM.Form
            Dim creationPackage As SAPbouiCOM.FormCreationParams
            creationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
creationPackage.UniqueID = "YOURUDONAME"
            creationPackage.FormType = "YOURUDONAME"
            creationPackage.ObjectType = "YOURUDONAME"
            creationPackage.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
            oForm = SBO_Application.Forms.AddEx(creationPackage)
The important parameter is:
>creationPackage.ObjectType = "YOURUDONAME"
and you should provide a fields which is drives the browser object. This example for Mater Data Type UDO, ITEM UID is CODE and the browseBy Property of this form is linked to this item UID.
oItem = oForm.Items.Add("CODE", BoFormItemTypes.it_EDIT)
            oItem.Top = nTop
            oItem.Left = 220
            oItem.Width = 100
            oItem.SetAutoManagedAttribute(BoAutoManagedAttr.ama_Editable, BoAutoFormMode.afm_All, BoModeVisualBehavior.mvb_False)
            oEditText = oItem.Specific
            oEditText.DataBind.SetBound(True, "@UDOTABLENAME", "CODE")
            oForm.DataBrowser.BrowseBy = "CODE"
Regards
J

Similar Messages

Work with data from a table of another SAP R/3 system

Hi,
I want to work with data from a table of another system. I know there's a function called 'RFC_READ_TABLE' but I don't know really how it works. What I want to do is to get data from that system and pass it to the one where I'm working in order I can continue working with this data in the report.
Besides, I'd like to select only the records that have some conditions.
I'd appreciate if someone could tell how to do it, whether with FM 'RFC_READ_TABLE' or in another way.
Thanks in advance,
Gerard
P.S: The systems are already connected in SM59

Yes, you can use RFC_read_table .You can pass the number of columns but I recommend you to bring all results in your internal table after that you can filter the records. Most of the time I have notice when you make RFC call with this FM to another system it works but it may also happen that other system controlling authorization and then it might give you nothing. As I face this problem on my last Project.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Working with dates

hello,
I am working with dates. It looks like so:
1st I want to calculate a time span for example calculate cell A2 - cell A1. In cell A1 it is written 01.01.2010 (so first of January) and in cell A2 01.02.2010 (so first of February). I wrote the dates in letters, too, to avoid misunderstandings due to different national date formats.
Since January has 31 days, the obvious result thereof is "31D". So far so good.
but now I want to multiply the 31 with a numeric value, but not the 31D, because if I do so, and let's say the numeric value is 3, then my result is 93 DAYS rather than just 93.
So my question is, is there any possibility how I can further calculate with a result coming from date calculations without having the new result also in the date format? Anything that escapes the "DAYS" in further calculations??
Thx

mac-a-rooney wrote:
I am working with dates.
1st I want to calculate a time span for example calculate cell A2 - cell A1. In cell A1 it is written 01.01.2010 (so first of January) and in cell A2 01.02.2010 (so first of February). I wrote the dates in letters, too, to avoid misunderstandings due to different national date formats.
Since January has 31 days, the obvious result thereof is "31D". So far so good.
but now I want to multiply the 31 with a numeric value, but not the 31D, because if I do so, and let's say the numeric value is 3, then my result is 93 DAYS rather than just 93.
Are you sure you're asking in the right forum?
Using Numbers '08, with the following entries:
B2: Jan 1, 2010
C2: Feb 1,2010
D2: =C2-B2
E2: =3*D2
I get 31 (not 31D) in D2 and 93 (not 93 DAYS) in D2.
From your description, I think you're actually using Numbers '09, and Jerry's advice above applies.
Regards,
Barry

What does HTML have over PDFs when working with data?

I'm doing some research for a client whose company is moving from PDFs to HTML for their in-house user interfaces.
What does HTML have over PDFs when working with data?
Thanks!
Luke

PDFs can indeed work with data and can be programmed with javascript. You can do some pretty interesting things with it. It is even possible to create interactive forms on the web using PDF, however it requires server-side support. As a general rule, though, PDFs are terrible as a web interface and it's far easier to work with HTML and PHP.
HTML is lightweight and PDF isn't (in case that seems like a small thing, it's actually a big negative for PDFs). The success of your PDFs will depend on the versions of acrobat your users use, and getting data in and out of the PDFs will require learning far more about Acrobat's FDF format and XML implementation than you may want to know.

Improving the LabVIEW Help: Working with Data Types

Have you ever had trouble figuring out how to work with the waveform data type, the dynamic data type, or some of the other more complex data types in LabVIEW? As a tech writer on the LabVIEW team, I'd like to improve our documentation about working with data. What would you like to see? What would be helpful? Have you ever given up on a particular data type because it didn't work? Have you ever created a replacement data type because you preferred not to use a LabVIEW data type?
Lacy Klosterman Rohre | Marketing Editor | National Instruments | 512.683.6376 | ni.com/newsletter

I've been programming LabVIEW since around 3.1 / 4.0. Over the years and versions, I've found it necessary to approach a lot of the new datatypes and algorithms with some healthy skepticism because I don't think we're usually given a "fair and balanced" overview. Some of the things that are highly promoted that bring "ease of use" for beginners (and I *do* understand the importance of that when you're growing your LabVIEW user base) can carry significant performance penalties that are mentioned in more of a whisper, if at all. I'd just like a more full disclosure of the tradeoffs -- the good, the bad, and the ugly.
Waveforms -- very rarely use them, unless required for analysis functions. I have a vague notion (between a belief and a memory) that they used to carry a significant performance penalty compared to arrays, but that the gap is now much smaller. Still, I'm most comfortable with my old habit of using data arrays. Some of this came about because a lot of my work uses counters where I may have a variable "dt" value or where my AI is clocked by a counter and the "dt" isn't internally generated.
Dynamic signals -- have never used them. Have no clear idea what good they're supposed to be, and they seem to be tied in primarily with Express VI's, which I have also studiously avoided.
Variants -- Use them only slightly. Performance issues are a question mark. Exception: have learned that the implementation of Variant properties allows their use as an efficient way to create associates for string lookup tables.
Digital Waveform -- have typically avoided it except when graphing digital data during debug. Haven't found any compelling reasons to use it. I do like the notion of a compress/expand capability for sparse digital data, but haven't exercised it enough to trust the implementation.
Recap: I don't need more simple "how-to's" in the help. I need a LOT more "why bother's" that include both pros and cons.
-Kevin P.

How to get hebrew characters to work with data merge?

I'm trying to work with data merge with Hebrew characters and get gibrish on the panel, merging and export.
I've tried to change the CSV file to Unicode and change the language setting but it still don't work.
I've worked with data merge before in English and it work perfectly.
Any Ideas? is this a bug? software constrains?

Try this:
Save your file as a UTF-16 BE (Big Endian) file.
Import showing options in ID. I'm on a PC, choose the below regardless.
Should look like this in ID.
Apologies to Farsi-speaking people everywhere. I pulled some text out of a Farsi text file to make up this tab-delimited merge file. I don't speak it, so it is likely servely non-sensical.
The text editor being used here (first screen shot) is the OpenSource NotePad++. I am also not using the ME version of ID.
Take care, Mike

CISCO Box not working with Infrared Remove Control Repeater

There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?

If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

GPS does not appear to work with data-roaming off and no wi-fi network

I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

The iPhone's GPS does work without a data connection.
Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

Widows Search not working with Data Deduplication?

Hi,
I noticed that many files were missing when searching for them on my Server 2012 Fileserver.
After some troubleshooting I noticed that the ones missing, had a Size on Disk of 4KB and the "SparseFile" and "ReparsePoint" (PL) Flags set.
So it looks like they were processed by the enabled Data Deduplication.
Am I missing something here or is it really the case that deduplicated files cannot be indexed by windows search?

BTW! "... and mounted those file hierarcies below. 5 reparse points" so I my case I had consolidated the users Space into 5 overall concepts on 1 volume each. In that way I had already reduced my use of volumes.
So for now I can add a drive letter to each for trying to make Windows Search work.
But guess I am going to stumble into the same issue then with Windows Search not supporting resparse points again ....because some of the volumes are deduped.
Great experience as ever working with file virtualization in the Windows client, i.e. Liberaries. Just wonder why the heck MS did not improove that experience ...
Right now, with Server 2012, find myself "hacking" again this year 2013 ... to try and make Windows work on some basic issues. All the Flex is starting to go away now ... here comes reality ... NOT WORKING.
NTFS resparse points, long file names, etc. Great Flex! However in theory only. For real when everything is pulled together and the system receives its more or less complete configuration ... unsupported in Windows. Go hack it.
Please stop doing just components test ... and do complete flight tests also. More hollistic tests please across constraints! With a focus in each test ... from 0 to a fully configured system.
How can no support in Windows Search for resparse points in NTFS be a miss during introduction of libraries (Windows 7/2008 R2) and now during introduction of data deduplication (Windows 8/2012) ... during just internal tests at MS? And we all have to use
libraries (thus a remote Windows Search index on remote shares in a domain setup) ... and now Windows 8 WinRT is even more dependent on libraries? How can that be overlooked - or such a basic thing receive no priority - and just get skipped? How can that happen?

Working with Data Sets

Hello,
First I am using Dreamweaver CS4 and working with the built in data table templates. I am using the spotlight with detail area option. I have it working fine and the data displays correctly. However there are no labels generated with the data. An example is a phone number shows as 123-456-7890 just as it is in the data table, but I would like a label for that field to show the output as Cell Phone: 123-456-7890.
Any help would be greatly appreciated. I know I am probably missing something rather simple.
MJMolloy01

Well, I figured the solution out myself. I guess a little peace and quite will always help work through the issue. I found that if I go into code mode and insert a label tag in front of the dynamic data it works fine.
If there is an easier way of doing this feel free to explain.
Thanks,
MJMolloy01

Working with data services on remote server (not just deploying)

Hi!,
Is this possible? I'm used to work directly agains remote servers, but it seems flash builder 4 data services doesn't like it in development phase.
I know I can deploy my services to a remote server for production, but want to do the same in development phase, work against remote data service. Could anyone suguest any tip?
Thanks in advance,
HexDump.

Hello HexDump;
If I understand your question correctly - you are trying to connect to a remote server to use its data during development. What type of data are you working with and how do you connect to it?
For example if you are using php/mySQL on your remote server and you are using data services and a callresponder, you can put in the endpoint in your service (see below example). *This might change in newer revisions.
<fx:Declarations>
<users:Users id="users" destination="users" endpoint="http://www.yourdomain.com/gateway.php"
fault="Alert.show(event.fault.faultString)" showBusyCursor="true" source="users"/>
<s:CallResponder id="loginUserResult"/>
</fx:Declarations>
John

Working With Data Models !!!!

Hi,
I am working with TableViews can some one tell me about some good material I can go through for Data Models and how i can work with them.

Hi Emmanuel,
many people have given you some points for your help, but you didn't vice versa except once.
I will replace this text with the answer to your question (as far as I can) if you reward points (or at least reply why the offered help didn't work; be more responsive, please) on the following threads
How to create a new System !!!!!!!
How to use Visual Administrator !!!!
How to use Logger !!!!
Console Output !!!! Need Help Badly !!!!
How to use onRowSelection !!!!
Best regards
Detlev

Working with Data Field (XMLTYTPE)

XMLTYPE is a new type of data element I have yet to work with and I am seeking some guidance as how best to approach
this in order to display the contents of these fields.
I have the XSD available to me which I believe I will have to query the contents withing this field and within a outter query.
This may not be an easy task to explain, but if some one is willing to take a stab at it, i'd greatly appreciate any advice given.
Enjoy your Day,
Sincerely,
George

Check this link
http://docs.oracle.com/cd/B10500_01/appdev.920/a96620/xdb04cre.htm
If helps pls mark

ExternalInterface in C# form does not work with debug ActiveX control

Hello,
I have a C# form that is a container for the Flash ActiveX
control. Everything works find as far as communication between the
two (container and Actionscript) if I use the release version of
the ActiveX control. If I use the debug version, the container does
not receive call events. Obviously I need to be able to debug both
the C# and actionscript code simultaneously. I have searched this
forum (and others) for any insight, but nothing glares out at me.
Could this possibly be a security issue?
Brad

I thing I have a solution for you. I created a note on it end of November (unfortunately, our systems have not replicated it to the outside yet). Here is the content of the note:
Symptom
Using Visual Studio .NET, database logon code is not recognized.
Crystal reports Viewer database logon parameter screen prompts for login.
This symptom is only observed when using Crystal Reports 2008 Service Pack 2.
Crystal Reports 2008 with Service Pack 1 works as expected.
Reproducing the Issue
Use Crystal Reports 2008 SP2 to create a report with dynamic parameter(s)
Use the following code from the Crystal Reports SDK for VS .NET
Dim crDatabase As Database
Dim crTables As TablesDim crTable As Table
Dim crTableLogOnInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
crReportDocument.Load("<path>")
crReportDocument.Refresh()
crConnectionInfo = New ConnectionInfo()
With crConnectionInfo
.ServerName = "<New Server Name>"
.Password = "<password>"
End With
crDatabase = crReportDocument,Database
crTables = crDatabase.Tables
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
CrystalReportViewer1.ReportSource = crReportDocument
The above code works with Crystal Reports 2008 SP 1
Resolution
Add .DataSourceConnections(0).SetConnection to the code as follows:
For Each crTable In crTables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
''This is the line of code to be added ****
crReportDocument.DataSourceConnections(0).SetConnection("Sever Name", "Database Name", "Use ID", "Password")
CrystalReportViewer1.ReportSource = crReportDocument
The issue has been submitted for a resolution.
Tracking number is ADAPT01333806.

Will Oracle9i Dataguard broker work with Oracle10g Grid control ?

Hello all,
I have recently configured Oracle9i dataguard using Dataguard broker and it's currently working fine but I am not sure if this could be managed with Oracle10g Grid control as it does for Oracle10g dataguard (i.e. Switch-over, Protection mode switching and so on ..)
I would appreciate if anyone could enlighten me further on this as I have not been able to find any proper document to provide me with the appropriate answer .
Thanks..

Ram,
For your JBCL questions:
JBCL 2.0 WILL be included in the production release of JDeveloper
2.0, but will not be visible on the palette by default. You can
add it back in if you really want to use JBCL.
For more info on this decision and why we are recommending Swing,
over JBCL see the post titled 'Which Oracle JDeveloper 2 GUI Lib
for database access' dated March 26. It includes plenty of
detail.
As for your gridControl question:
You can use a picklist with a gridcontrol, but there's not an
'automatic' way to do it (i.e. via the properties sheet). You
need to create a new rowsetinfo object that contains your query
for the picklist. Then bind this rowsetinfo object to a Swing
list control or combobox control. Finally, you need to hook the
list control to the cell of the grid you want the list to appear
in.
- L
Ram (guest) wrote:
: Hi
: I got a reply to my field control painting problem from Mark
: Tomlinson saying that JBCL 2.0 is not included in the
production
: release of Jdev 2.0.
: Any way Oracle has recommended using of Swing based DAC
: Gridcontrol.I am using a oracle.dacf.gridcontrol.But I cant get
: a picklist to popup using this.
: I have a few questions here
: 1. How do i get a picklist popping using
oracle.dacf.gridcontrol
: 2.At present i am using the same popup picklist item editor in
: JBCL.If this is not included in the production release how Dom
i
: get this going
: 3.Do you recommend not to use JBCL any more??
: THanks
: Ram
null

Working with data navigation controls

Similar Messages

Maybe you are looking for