Working with data services on remote server (not just deploying)

Hi!,
Is this possible? I'm used to work directly agains remote servers, but it seems flash builder 4 data services doesn't like it in development phase.
I know I can deploy my services to a remote server for production, but want to do the same in development phase, work against remote data service. Could anyone suguest any tip?
Thanks in advance,
HexDump.

Hello HexDump;
If I understand your question correctly - you are trying to connect to a remote server to use its data during development. What type of data are you working with and how do you connect to it?
For example if you are using php/mySQL on your remote server and you are using data services and a callresponder, you can put in the endpoint in your service (see below example). *This might change in newer revisions.
<fx:Declarations>
<users:Users id="users" destination="users" endpoint="http://www.yourdomain.com/gateway.php"
fault="Alert.show(event.fault.faultString)" showBusyCursor="true" source="users"/>
<s:CallResponder id="loginUserResult"/>
</fx:Declarations>
John

Similar Messages

Cant work with Data Services

Hi,
I am new to flex and I want to know step-by-step guidelines
to smoothly install FDS on my laptop and easily run the sample
applications. Currently when I install FDS on my machine,
everything works fine and I am even able to access the
http://localhost:8700/flex
url and
http://localhost:8700/samples
url. But when I click on the link for any sample application on the
samples page, it gives me a page not found. Also when I open a new
Flex data services project in Flex Builder and write some code, I
get an problem error in flex builder-"unable to open
services-config.xml"
I browsed to the folder in JRun\default\servera\flex and
indeed there was no file called "services-config.xml"
I am stuck at this point and hence cannot run any sample or
my own application using data services. Please someone help me out
here as maybe I am forgetting something trivial or there is some
other issue.
Thanks.

Then I'd say you don't have a correctly setup web
application... look for
samples.war and expand it using winzip - notice the contents
of /WEB-INF/
directory. You should have /WEB-INF/flex/services-config.xml
if you have
a valid FDS war file.

Can't get commit method to work with Data service

Hello
I am trying to write changes to a database from a combo box.
I am using the commit method as follows
TblsituationService.commit();
But I am getting the following error message
1061: Call to a possibly undefined method commit through a reference with static type Class.
I think it's something to do with the service but I don't know What.
Thanks in advance
Paraic

the error is "Could not create resource factory, ClassNotFoundException"

Error while deploying when working with web service

Hi friends,
I am working with web service. When i try to run the build.xml, I'm receiving an error as follows:
*[javac] D:\MyWorkspace\MyProjectWeb\Javasource\aaa\bbb\ccc\ws\endpoint\ListenerServiceEndpoint.java:27: package org.springframework.ws.server.endpoint does not exist
[javac] import org.springframework.ws.server.endpoint.AbstractDomPayloadEndpoint;
[javac] ^ *
Could anyone please help me in getting this solved??
Thanks in Advance,
Robis

Pretty self-explanatory - the Spring framework jars are missing from the classpath used in compilation.
If you don't have them, get them from www.springframework.org.

Will all of the CS4 programs work with Terminal Services?

I think the title sums up my question...
Will all of the CS4 programs work with Terminal Services?

You should be able to solve that problem.
MiFis have a default power setting on them that turns off the device after XX minutes of no use (As determined by the MiFi). You can find and modify this setting in the MiFi Admin webpage. It should be under the advanced area and can be configured to leave the MiFi on all the time.
That being said, no MiFi model will behave very well as an always on home internet replacement device. Dedicated home cable routers and modems will always perform better, they are designed for that scenario. By comparison MiFis are designed to be light weight travel devices, they simply do not have the hardware necessary to be left online all day long with acceptable results. MiFis are more appropriate as a backup, mobile or temporary internet solution.
If you are looking for a home internet always on internet connection device you would be safer going with stronger hardware like a USB Modem+CradlePoint router, the VZW 4G LTE router or VZW HomeFusion. Any of those devices are going to provide you with a better experience for your home than the MiFis without additional equiptment like boosters and antennas. Some CradlePoint routers can be expensive but perform very well, the 4G LTE router has mixed review and the nice thing about HomeFusion is the special data plan and high powered equiptment.

How to get hebrew characters to work with data merge?

I'm trying to work with data merge with Hebrew characters and get gibrish on the panel, merging and export.
I've tried to change the CSV file to Unicode and change the language setting but it still don't work.
I've worked with data merge before in English and it work perfectly.
Any Ideas? is this a bug? software constrains?

Try this:
Save your file as a UTF-16 BE (Big Endian) file.
Import showing options in ID. I'm on a PC, choose the below regardless.
Should look like this in ID.
Apologies to Farsi-speaking people everywhere. I pulled some text out of a Farsi text file to make up this tab-delimited merge file. I don't speak it, so it is likely servely non-sensical.
The text editor being used here (first screen shot) is the OpenSource NotePad++. I am also not using the ME version of ID.
Take care, Mike

Unable to Connect Oracle 7 with Data Services 3.2

Hi All,
I am incredibly facing an issues with Oracle 7 connecting with Data Services 3.2. with Native client drivers (TNS Names).
The client legacy application is on Oracle 7, they are moving the data from legacy to SAP ECC. My role is to transfer the data from Oracle 7 to SAP ECC, We are using Data Services 3.2 for conversion. This Data Services 3.2 is not connecting with Oracle 7 by using oracle native drivers (TNS Names).
I am able to connect Oracle 8 client with SQL *Plus, but with Data Services its not connecting, I am able create Data Store but when try to import the table the error message I am getting like "ORA-24316: Illegal handle Type"
Is there any other solution for this to connect, or Is Data Services 3.2 will not connect to Oracle 7 since its older version.
Please reply with your thoughts, or with some solution.
Appreciate your prompt reply. Many thanks.

Hi Paul,
Currently I am using ODBC connection to read the data from legacy Oracle7, but ODBC is very very slow, queries are taking hours to fetch the data. Is there any other solution by chance... I read that DataDirect is the one can connect to any versions of oracle and its bit faster, is that true. Please clarify me. If that is the solution where can I get this DataDirect drivers for oracle 7? Please advice me.
Thank You,
Ashok

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Working with dates

hello,
I am working with dates. It looks like so:
1st I want to calculate a time span for example calculate cell A2 - cell A1. In cell A1 it is written 01.01.2010 (so first of January) and in cell A2 01.02.2010 (so first of February). I wrote the dates in letters, too, to avoid misunderstandings due to different national date formats.
Since January has 31 days, the obvious result thereof is "31D". So far so good.
but now I want to multiply the 31 with a numeric value, but not the 31D, because if I do so, and let's say the numeric value is 3, then my result is 93 DAYS rather than just 93.
So my question is, is there any possibility how I can further calculate with a result coming from date calculations without having the new result also in the date format? Anything that escapes the "DAYS" in further calculations??
Thx

mac-a-rooney wrote:
I am working with dates.
1st I want to calculate a time span for example calculate cell A2 - cell A1. In cell A1 it is written 01.01.2010 (so first of January) and in cell A2 01.02.2010 (so first of February). I wrote the dates in letters, too, to avoid misunderstandings due to different national date formats.
Since January has 31 days, the obvious result thereof is "31D". So far so good.
but now I want to multiply the 31 with a numeric value, but not the 31D, because if I do so, and let's say the numeric value is 3, then my result is 93 DAYS rather than just 93.
Are you sure you're asking in the right forum?
Using Numbers '08, with the following entries:
B2: Jan 1, 2010
C2: Feb 1,2010
D2: =C2-B2
E2: =3*D2
I get 31 (not 31D) in D2 and 93 (not 93 DAYS) in D2.
From your description, I think you're actually using Numbers '09, and Jerry's advice above applies.
Regards,
Barry

How to extract data from CRM with Data Service?

Hi all,
I'll try to explain briefly the main issue; We need to read or extract data from SAP CRM with Data Service tool, then we'll show the data with webi, but now I would like to know if there are some standard tool as a rapid mart (i mean that it doesn't exists) but if some one knows how it works and if it's possible, it could be very helpful for us.
BW option doesn't ok because the client needs a lot of queries for a report and the standard tool in our project is Data Service.
Thanks in advance, and ask all u need if it can be a help for answer the question.
Best Regards.
Edited by: Cantabria on Jun 7, 2011 1:14 PM

Hi,
Your very familiar with LO data source even though your getting doubts on it.
LBWE/SM13 belongs to only LO Data sources.
CRM data sources also have delta settings based on data source.
You can search on google about CRM data sources by using data source names.You may get some useful information.
Before using CRM Data sources, CRM functional team need to set proper configurations at CRM system. those also you can easily get form google.
use search term as " CRM - BW Adapter settings".
Like other standard data sources for crm also,
we need to activate from RAS5 and do the modification at RSA6.
test at RSA3 and replicate into BW. Do the rest of the flow at bw system.
Thanks

What does HTML have over PDFs when working with data?

I'm doing some research for a client whose company is moving from PDFs to HTML for their in-house user interfaces.
What does HTML have over PDFs when working with data?
Thanks!
Luke

PDFs can indeed work with data and can be programmed with javascript. You can do some pretty interesting things with it. It is even possible to create interactive forms on the web using PDF, however it requires server-side support. As a general rule, though, PDFs are terrible as a web interface and it's far easier to work with HTML and PHP.
HTML is lightweight and PDF isn't (in case that seems like a small thing, it's actually a big negative for PDFs). The success of your PDFs will depend on the versions of acrobat your users use, and getting data in and out of the PDFs will require learning far more about Acrobat's FDF format and XML implementation than you may want to know.

Improving the LabVIEW Help: Working with Data Types

Have you ever had trouble figuring out how to work with the waveform data type, the dynamic data type, or some of the other more complex data types in LabVIEW? As a tech writer on the LabVIEW team, I'd like to improve our documentation about working with data. What would you like to see? What would be helpful? Have you ever given up on a particular data type because it didn't work? Have you ever created a replacement data type because you preferred not to use a LabVIEW data type?
Lacy Klosterman Rohre | Marketing Editor | National Instruments | 512.683.6376 | ni.com/newsletter

I've been programming LabVIEW since around 3.1 / 4.0. Over the years and versions, I've found it necessary to approach a lot of the new datatypes and algorithms with some healthy skepticism because I don't think we're usually given a "fair and balanced" overview. Some of the things that are highly promoted that bring "ease of use" for beginners (and I *do* understand the importance of that when you're growing your LabVIEW user base) can carry significant performance penalties that are mentioned in more of a whisper, if at all. I'd just like a more full disclosure of the tradeoffs -- the good, the bad, and the ugly.
Waveforms -- very rarely use them, unless required for analysis functions. I have a vague notion (between a belief and a memory) that they used to carry a significant performance penalty compared to arrays, but that the gap is now much smaller. Still, I'm most comfortable with my old habit of using data arrays. Some of this came about because a lot of my work uses counters where I may have a variable "dt" value or where my AI is clocked by a counter and the "dt" isn't internally generated.
Dynamic signals -- have never used them. Have no clear idea what good they're supposed to be, and they seem to be tied in primarily with Express VI's, which I have also studiously avoided.
Variants -- Use them only slightly. Performance issues are a question mark. Exception: have learned that the implementation of Variant properties allows their use as an efficient way to create associates for string lookup tables.
Digital Waveform -- have typically avoided it except when graphing digital data during debug. Haven't found any compelling reasons to use it. I do like the notion of a compress/expand capability for sparse digital data, but haven't exercised it enough to trust the implementation.
Recap: I don't need more simple "how-to's" in the help. I need a LOT more "why bother's" that include both pros and cons.
-Kevin P.

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Twistedcaldav remote-server-not-found error

[notifications] 2012-01-01 18:53:11+0100 [XmlStream,client] [twistedcaldav.notify.XMPPNotifier#error] PubSub node creation error: <error code='404' type='cancel'><remote-server-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error>
Whenever I startup iCal on my OSX Server I see the following error.
Can anyone explain what this is caused by?
-Paul-

''AG [[#answer-698983|said]]''
<blockquote>
disabling the .http2 configs did not work
is there a work around for the DNS "ANY" issue for me to try? I'll search.
A
</blockquote>
The easiest method is just to wait a few days for the Fx36.0.1 update. If you use
Firefox Menu Button -> Help -> AboutFirefox
each day that will check to see if the upgrade is available.
The bug fix is I think merely changing prefs and so you could do that yourself. It may be safer to use a spare additional profile, or backup the file ''prefs.js'' when trying that initially, because making mistakes in about:config may break Firefox.
* http://kb.mozillazine.org/Prefs.js_file
* http://kb.mozillazine.org/About:config
* [[Use the Profile Manager to create and remove Firefox profiles]]
Just toggling the pref '''''network.dns.get-ttl''''' to '''''false''''' should fix the issue, that basically is what is done in
Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL
One of the bug fixes about to be applied in the imminent Fx36.0.1 point Release

Working with data services on remote server (not just deploying)

Similar Messages

Maybe you are looking for