Working With two files in LSMW

Hi,
I am uploading BOM data using a standard object 0030. Here i an trying to upload data using two file one for header and second for item. Can i know how can we relate the files. As for the material BOM header how will it know what items to pick up. Need an example or tutorial for the smae. ANy help will be greatly appreiciated.
Regards,
Gurpreet SIngh.

Hi,
you need to specify key which is the relation between header and item data:
Key in Header file:     Material in Header          Plant ........
100001                          FG1000                    1000.........
Key in Item file:        Material Component      Q-ty
100001                          RM150                   10
100001                          RM200                   1
Regards Vassko!

Similar Messages

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Do I need BootCamp in order to work with Publisher files?

I need to be able to create and work with Publisher files. From what I've read, the only two options are: 1. buy a PC (UGH) and then purchase Windows and Publisher.
OR
2. Purchase BootCamp, Windows and Publisher.
I was hoping that by some miracle, some software company has addressed this. Like Pages or Word.
Any recommendations?
Thanks

You need MS Publisher which is not available for the Mac, there are no compatible programs as far as I know.
Do you need BootCamp? if you are planning on installing Windows natively then yes, or you could run it in a VM, but with less performance usually.
Or buy a cheap PC (with windows) and run it there.

Working with big files

I would appreciate any suggestion as to how best one can work with big files. I have eight one hour tapes containing information about various places I visited. Some contain only one place while others can contain two or more places. As a preference I like to create up to one hour DVDs that contain an identifiable segment; eg either one place only or more but I do try not to break up a place and record it on two DVDs. However, the problem I faced in the past, is that by the time I get to the end of an hour, the program Premiere Elements 7 (PE7) is getting slow and keeps telling me that it is running out of memory. That is despite the fact that I have 3 GM of RAM and over 200 GB of dedicated separate hard drive. I tried saving segments under ‘Share’, ‘DV AVI’ and selecting ‘DV PAL Standard’ (the system I use), but the result, as far as quality was concerned, was very disappointing. There is no option to change or set quality as was the case in previous versions of PE. Nor can I combine two .prel files into one while I am editing.
Is there any other way I can work in segments, say 15 minutes, and combine them at the end without losing on the quality?
Any suggestion would be most appreciated.
Tom

Hi Steve
It is a Sony DCR-HC40E PAL, and they were captured as AVI clips.
The project settings are:
General – not highlighted but it shows DV Pal and 25.00 frame/second
Video – 720 horizontal 576vertical (4/3)
Display format - 25 fps Timecode
Capture – DV Capture
Tom

Is there a way to work with two or more app at the same time on iPhone or iPad

Is there a way to work with two or more app at the same time on iPhone or iPad?

What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.

Can you setup handoff to work with two mac computers on the same network?

I am attempting to setup handoff to work with two computers on the same network. I cannot seem to get it to work. Should I be able to?

I'm not sure but I haven't seen anything on the Apple site that indicates that it would not work. The following troubleshooting documents may help: Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Note in particular the Mac models supported. The other thing that occurs to me is that in addition to being on the same network they would have to be within Bluetooth range of each other.

Is there a download and convert in a single step option in the flashdownloader 2.6.8. add-on? I end up with two files, one downloaded original and one converted to my chosen format.

Files are downloaded and only then encoded, so I end up with two files in the drive.

That has been like that since Firefox 3.0 was released in June 2008 - 7 major version releases thus far with it like that and the developers haven't changed it - so I wouldn't count on it.
When I want to save a duplicate bookmark, I just "grab" the website image in the Location Bar and drag it into the Bookmarks Sidebar, into the folder where I want it placed. On Windows and Linux, { Ctrl + B } opens the sidebar and then just drag.

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

Working with RAW files in PSE9: Doable or better to use PSE12?

I have PSE 9 and will soon get a camera with RAW capability. I notice that Adobe no longer supports PSE 9. Am I in for trouble if I don't upgrade to PSE 12 since I don't know how to work with RAW files? It sounds as if I will need something to convert RAW files? Where do I get it? Is it a big deal for a beginner with no software skills?

You can download a free DNG Converter from Adobe and then convert your RAWs to DNGs which can be used in PSE9.
You don't need PSE12, but if you want to purchase PSE 12, you get the most current features in the Raw processor (which in my opinion is a huge improvement over what is available in PSE9), and you don't need the extra step of converting to DNG.

Working with RAW files in iPhoto 5.0.4 and Elements 4.0.1

I take photos in RAW mode and download them to iPhoto. When I try to edit the photo in iPhoto, the picture is a tiny little file that is impossible to enlarge with any sort of clarity. Also, the word "RAW" does not appear anywhere on the iPhoto window like I read it is supposed to.
When I drag the file to Photoshop Elements, I get an editing window that has none of the tools usually associated with JPEG files. I get a separate window in which I can darken or lighten the image, that's it.
Clearly, I'm doing something wrong. No one in their right mind would ever use RAW if this is how it works.
Any ideas?

Hi Jack!
If you're new working with RAW files, your right, it just doesn't make sense. RAW <imho> is a bit overrated. One thing you will need to keep in mind when shooting in RAW, is you will still need to take a well exposed image. What RAW files will allow are CHANGES in all areas of the image v. JPEG which may allow you to ADJUST a few settings in the image. My only suggestion would be to kepp playing around with PSE until you get the hang of it, it is an excellent image editing software. But realize, a well exposed JPEG and RAW file are hard to tell apart...
Personally, I do not directly download RAW files through iPhoto but will create a folder and download to here, and simply drage folder to iPhoto to import (which are then 'converted' into JPEG files). This way I have the original RAW images safely located outside of iPhoto as well as in iPhoto. You should set Elements as your choice of application to edit files inside iPhoto.
Good luck, Rick
Good link: http://www.elementsvillage.com/forums/ and just for fun: http://www.photoshopcosmetics.com/index.php

Working with Large files in Photoshop 10

I am taking pictures with a 4X5 large format film camera and scanning them at 3,000 DPI, which is creating extremely large files. My goal is to take them into Photoshop Elements 10 to cleanup, edit, merge photos together and so on. The cleanup tools don't seem to work that well on large files. My end result is to be able to send these pictures out to be printed at large sizes up to 40X60. How can I work in this environment and get the best print results?

You will need to work with 8bit files to get the benefit of all the editing tools in Elements.
I would suggest resizing at resolution of 300ppi although you can use much lower resolutions for really large prints that will be viewed from a distance e.g. hung on a gallery wall.
That should give you an image size of 12,000 x 18,000 pixels if the original aspect ratio is 2:3
Use the top menu:
Image >> Resize >> Image Size

Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

Hey,
Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes. Also, this happens when I try to work with audio files in the file editor. I have Leopard and am using Logic Studio 8. Any insight would be much appreciated. Thanks
Matt

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Working With two files in LSMW

Similar Messages

Maybe you are looking for