Workshop 8.1 and .svn (subversion control dir)

Hi everybody.
Is there any way of to configure Workshop to "ignore" some directories ? We are using subversion, but Workshop is trying to scan every .svn directory. How can i disable this behaviour ?
Thanks in advance.

Hi Daniel
I have come across this issue before but could not
find a way around.
Workshop does not support SVN source control system
and there is an enhancement request to support it in
a future release.
We can specify the directory list in the attribute
"excludedirs" in the .work file like
<option name="excludedirs" value="cvs;sccs;rcs;" />
But since svn also has a "." prefix in the folder
name, it seems to ignore it.
Have you tried this attribute?
Thanks
VimalaHello, this is my first post here,
I have the same probleme (but Workshop 9.2.2)
when i create my .ear file, i have the folders .svn
Where can i find the configuration file , in order to add the exclude dirs option ?
Thanks in advance
Elizabeth

Similar Messages

Can't rename file under Subversion control.

CS5 - Unless I'm missing something you can't rename a file (using dreamweaver to do so) and have it maintain it's connection to subversion. For example, if I rename a file using Dreamweaver, edit it, then go to "Commit" it, I get an error "File is not under Subversion Control". What is the correct way to rename a file in CS5 under subversion control?
This is a serious deficit.

Saving the file under a different name creates all sorts of problems. Especially since all the history of the changes are lost. DW provides a "rename" command but it doesn't update the files svn metadata. If you use the rename command it doesn't warn you that you will loose the connection to the repository.
This must be a bug because an equivelent version of Tortise SVN DOES allow you to rename a file and preserve all the history. I just found this out and am using Tortise SVN to do the renaming. It's the same SVN version as DW so it updates the metadat just fine and it preserves the history of the previously named file.
This is a bug in DW or a serious omission.

Workshop 8.1 and I/O operations

Hi everybody.
Does anyone have a glue about why i/o operations are slowly inside a running Workshop instance than "outside" it ?
I've an I/O intensive process that runs in 2-3 seconds when using a main method of a simple Java Class. When i try to run the same process (at same machine) inside a Java Control Class, they become about 4 times more slow.
I've run some tests and even when it is just reading and writing some big data from and to ByteArrayStreams, these operations perform slower inside than outside my Workshop Server instance (and i really don't know why).
I'm running out of ideas. Can the antivirus software be affecting read/write operations when Weblogic runs ?
I would appreciate any help of any kind.
Thanks in advance.

Hi Daniel
When you say inside I assume that you are running the app within IDE connected to a server. Can you please confirm?
If so please turn off the logging in the setDomainEnv.cmd/.sh (verboseLoggingFlag, debugFlag, logErrorsToConsoleFlag)
Also please set all the priority to 'error' in the workshopLogCfg.xml under WL_HOME/common/lib folder.
Let me know if the performance improves.
Thanks
Vimala

OTPC Teams and SVN Repo -- cannot use the same SVN repo for different teams

Can one Subversion repository be used as the versioning repository for two teams?
I recently installed OTPC Server and client.
As the administrator, I created a Rally connection, and a Task connection, and a Subversion connection.
I created a team, and attached the three connections.
All worked fine.
Next I created a second team, attaching the three connections.
In the JDeveloper OTPC client, the Rally and Task connectors work for BOTH teams that I am on.
The subversion connection will not.
In the Team Navigator Panel, under the "Versioning" accordion subpanel, for one team it has a SVN connection, for the other team it says "Create Connection."
When I double-click on it, enter the repository information, and test read access, it says "Access granted."
When I press Okay to close the dialog it says:
"A repository connection with the supplied URL already exists."
Is this an intentional feature that one subversion repository cannot be used on both teams? Or is it a bug? Or is it my error?
Thanks,
Arie

the proxy env is ok in superuser env
➜ ~ git:(master) ✗ export | grep proxy
ftp_proxy=http://proxy.zte.com.cn:80
http_proxy=http://proxy.zte.com.cn:80
https_proxy=http://proxy.zte.com.cn:80
rvm_proxy=''
➜ ~ git:(master) ✗ su
Password:
[root@myhost jinleileiking]# export | grep proxy
declare -x ftp_proxy="http://proxy.zte.com.cn:80"
declare -x http_proxy="http://proxy.zte.com.cn:80"
declare -x https_proxy="http://proxy.zte.com.cn:80"

Problem workshop 8.1 and oracle

i am trying to connect to oracle 9.2 from WL Workshop 8.1 using Data base control.
Connection gets established. But when i use this in page flow controller
(JPF) it (Database controller)returns null value.
Any suggestion
tia
Mahesh

Apparently not supported in 8.1, but in 9 it maybe...
http://issues.apache.org/jira/browse/BEEHIVE-260
>
The following enhancements have been suggested for the Template tags:
1) The Section tag should have an attribute that would include a .JSP page instead of requiring the second to have body content. The current work around here is to put an JSP include in the body of the Sectioni tag.
2) When using templates it is handy to create a basic template (one used for the entire site as a background, header, etc) and then possibly have another template that would be based off of that but would also add some additional information/color/shape that would be necessary for a subset of the pages but not all. [137261]
The specialization template could provide content to the general template and also define additional content that could be filled in by specific content pages.
For each jsp page that is going to include both templates one would have to have both in that jsp:
<netui-template:template templatePage="./jtemplate.jsp">
<netui-template:section name="BodySection">
<netui-template:template templatePage="jtest.jsp">
<netui-template:section name="leaguepage">
//FILL in league page here...
</netui-template:section>
</netui-template:template>
</netui-template:section>
</netui-template:template>

Workshop (9.2 and 3.x) and Mylar

Hello,
I am currently using Workshop 9.2 in a major portal Project (both based on 9.2 and 8.1.5 Servers)
Input into Eclipse Foundation's WTP project (with people like Tim Wagner or IBM's Arthur Ryman) over the last 12 months, resulted in some good progress now visible in Workshop 9.2 (and 3.2 based on Callisto)
Beside Subversion Plugins (which I was pleased to see widely supported by default) I am now using Eclips Mylar a lot and find it very useful.
It is fully compatible with Workshop 9.2 (should be with 3.2, too) and enables true task-based development under WebLogic Workshop (Eclipse)
I am also writing an article on Mylar for the German Eclipse Magazin based on those real hands-on success stories in WLW 9.2.
If there is interest here in the community, I'd be happy to provide information in English, too. Either via Newsgroups, or in an article (together with examples) or a blog.
Kind Regards,
Werner Keil

Hello Werner,
Please post the document to this newsgroup. You could also consdider submitting it to the BEA dev2dev site at http://dev2dev.bea.com/
cheers
Raj

Workshop 9.2 and Mylar

Hello,
I am currently using Workshop 9.2 in a major portal Project (both based on 9.2 and 8.1.5 Servers)
Input into Eclipse Foundation's WTP project (with people like Tim Wagner or IBM's Arthur Ryman) over the last 12 months, resulted in some good progress now visible in Workshop 9.2 (and 3.2 based on Callisto)
Beside Subversion Plugins (which I was pleased to see widely supported by default) I am now using Eclips Mylar a lot and find it very useful.
It is fully compatible with Workshop 9.2 (should be with 3.2, too) and enables true task-based development under WebLogic Workshop (Eclipse)
I am also writing an article on Mylar for the German Eclipse Magazin based on those real hands-on success stories in WLW 9.2.
If there is interest here in the community, I'd be happy to provide information in English, too. Either via Newsgroups, or in an article (together with examples) or a blog.
Kind Regards,
Werner Keil

Hi Werner
Thanks a lot for the information. Yes we would be interested in the article.
Can you please share the article once it's available?
Thanks again,
Vimala

I want to use subversion control tool with SQL Developer

Dear Gurus,
I have SQL Developer 2.1 on widows machine.
I have not used any subversion control tool for maintaining versions. But in my Office, we have TortoiseSVN 1.6.7
Could any anybody help me to understand subversion concept so as to use TortoiseSVN 1.6.7 with SQL developer.
And My regular task includes Developing SPs, functions, Packages tables etc.
How can I use subversion tool in my day to day routine.
Could anybody provide me links or tutorials so as to use subversion tool with SQL developer.
Regards
Sanjeev

http://st-curriculum.oracle.com/tutorial/SQLDeveloper/index.htm
Click on "Show Me and Try It"

CS6 and SVN version

Has anything been done to fix the version control issues in CS6 and SVN? It would be nice if it would play nicely with Tortoise.

dreamviewer is thebest
www.4bmuhendislik.com

The sound of my iphone has dissapeared when I play games and when i listen to muisic but when I put the headphones the sound come back and I can control the sound,what should I do??

I was on a boat ride when some water fell on it but it was just a little bit then when i tried to control the sound and volume while playing and listening to music it didn't showed anything and just with headphones it appeared again and i could listen and I could control it again but when i take the headphones out it goes back to the same thing.What should I do??

try toggling the Ducking menuItem

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

On-Screen Keyboard and a String Control

I am experiencing some odd behavior when I use the On-Screen keyboard (OSK) and a string control.
I am developing a application that will need to use the OSK to enter in some data on a touch screen monitor with no physical keyboard. I have a Event-Driven State Machine set up to the Key Down event when a word/characters are entered and the user presses the Enter Key on the OSK. I noticed if I probe the VKey wire wuen I press the Enter Key on the OSK, it comes across as a Return press. No big deal I thought, just see if the Return Key is pressed and continue on.
When I went to test my program, I noticed that my values were displaying as if nothing was entered. Digging a little further, I noticed that my original data is still there if I press the Backspace Key and remove the Return command. Probing the string wire within the string control indicates that that the value comes back as a empty string in my string control even though my entire string is physically still there. I can press the backspace key (deleting the carriage return) and see my original text. What I think is happening is when I press the Return Key on the OSK, it inserts something and moves my text either up or down and when I use the property node to extract the data within the string control, I get a empty string.
How have you gotten around this? I'd like to hear your solutions.
Solved!
Go to Solution.

Since you marked Jarle's message as the solution, I hope it means your happy and he's helped you solve your problem.
I had never seen the OSK app before. It looks like it can be very useful, but these other issues like how to programmatically get into it, or out of it with a task kill seem like they are a bit of a hack to work with something that shows so much promise.
If these issues are too big, consider making your home pop-up keyboard as a LabVIEW VI. It would be a little bit of work, but not so bad. I've made a pop-up numeric keyboard that I've used in a few apps of mine. Of course that is fewer keys to layout and deal with. And I didn't need decimals for what I was doing so I didn't have to program that which adds a little complication.
A pop-up keyboard might actually be easier, other than having 3-4 times the number of keys depending on how many symbols you need to deal with, and if you need to deal with CAPS, or CAPS lock or whatever.
There is also a chance that someone may have done something already. A google search might find something. It is likely in the NI community if it exists. If you can find something that works or is close to what you want, it might be better than using this OSK executable.
Just some ideas to toss out there.

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

Microsoft Date and Time Picker Control 6.0 (SP6) errors

One of our functioning VBA projects in Outlook 2010, running under Windows 7 Professional (64-bit), unexpectedly stopped functioning a few months ago. When running the VBA macro we started receiving the compile error message:
"Object library invalid or contains references to object definitions that could not be found"
PROBLEM FORM CONTROL: The message was extremely frustrating because it gave no detailed indication of the source of the problem. With a little research, however, we found that the
Microsoft Date and Time Picker Control 6.0 (SP6), on a userform accessed by the macro, was generating the error. A number of older articles, such as the one included below, indicated that we needed
to re-register the MSCOMCT2.OCX form control, which we did successfully (as did the original author in his question link below). Unfortunately, as the original author found, simply re-registering the form control did not resolve the problem.
UNRESOLVED QUESTIONS:
1. Does anyone know why this functioning control would unexpectedly cease to function?
2. Can anyone help us restore the functionality of the 'Microsoft Date and Time Picker Control 6.0 (SP6)'?
3. How come the form control is listed in the object library, is available in the 'Additional Controls' dialog, and can be inserted into a form, without any indication that it is broken?
SUPPORT ENGINEER RUN-AROUND: Another frustration is that a responding support engineer, in the prior article, keeps referring the author back to this forum, yet the question is apparently never answered back here in
the TechNet forum (which ironically refers us back to the original article in the other forum - a game of musical chairs!).
We suspect that the solution to this problem may be similar to resolving this issue for other similar form controls in other Office 2010 application, not just Outlook. After several years, and a myriad questions on the internet regarding
this exact subject, is there someone who can definitively resolve this issue with this control?
Thank you for any help.
LINK TO THE ORIGINAL UNANSWERED QUESTION (i.e., regarding the MSCOMCT2.OCX control and reference back to this forum):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/ms-date-and-time-picker-contol-60-sp-6-w-excel/9b0cc596-5e13-48bc-b03e-13dbfd1c7f9d

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Workshop 8.1 and .svn (subversion control dir)

Similar Messages

Maybe you are looking for