Would i be better off using parallels than boot camp

IS it easier to install parallels than boot camp?, Inonly want to be able to use the windows based version of Quicken

For $79 retail (or less) Parallels will give you the convenience of running your PC programs concurrently with your Mac programs.  Bootcamp will require a reboot each time you want to switch environments.
You are aware that Intuit sells Quicken 2007 for Lion, Mt.Lion, Mavericks for $15?
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp

Similar Messages

  • Better to use Parallels or Boot Camp?

    Hey there,
    I've been reading where Parallels 6 "has been shown on average to run 40 percent faster than last year's edition, according to people familiar with the matter. Those same people said that the upgrade -- expected to retail for the same $79.99 price as its predecessor -- will also feature Windows boot times that are roughly two times faster than version 3.1 of its primary competitor: VMWare Fusion."
    http://www.appleinsider.com/articles/10/09/08/parallels6_to_run_40_faster_launch_windows_2x_faster_thanfusion.html
    I'm curious as to whether it's better to run Windows 7 through Parallels or Boot Camp from a performance issue? If I want to play the new Civ 5 game, will I get better performance through Parallels or Boot Camp?
    Thanks!
    Eric Nanneman

    If you want to play a game, you'll need Bootcamp. 3D performance leaves a lot to be desired in both Parallels and VMWare.
    On another note, I really expect that Civ 5 will be released for Mac.
    Regards,
    -Ryan

  • In Switch Executive am I better off using manual or execution

    If I close a relay using Switch Exec ( IVI Switch)  in Test Stand 4.0, take a measurement then open that relay am I better off using manual or execution for the "life" of the step?
    I want to make sure the switch is open after the open relay step is executed.

    Hi Clint,
    2nd Question: Exclusions 
    For mutual exclusions, you create a list of channels that should never connect to one another.
    For set exclusions, you create two lists of channels. Channels from the first list should never connect to channels of the second list. For example, a set exclusion can be used to separate a high-power DC and RF signal.
    In reference to the 2 to 4 relays: if they were closed at the same time, would the result be a connection between channels?  If so, then you want to create an Exclusion of type Mutual and add these channels to the list. 
    1st Question: Aliases
    The easy answer to the copy/paste question is to use the integrated Excel import/export feature.  You can export your Virtual Device to file and open it in Microsoft Excel.  From there, you can edit your configuration and copy the necessary aliases from one Route Group to a new one (using Excel's simple text editing features and/or advanced formulas).  When you are satisfied with your changes, you can import your configuration back to a new or existing Virtual Device. 
    However, I believe the whole purpose of copying aliases between Route Groups was to create exclusions for one Route Group, but not the other.  This is not possible.  Exclusions can be created for the Virtual Device, and this exclusion then applies for all the Route Groups in that Virtual Device.
    If you want one Route Group that obeys an exclusion, and a second Route Group that ignores the same exclusion, then one way to do this would be to create two individual Virtual Devices; the first Virtual Device configured with exclusions, the second not.
    By the way, you can do this using the aforementioned Excel import/export feature.
    Hope this helps.  Let me know if you have further questions!
    Chad Erickson
    Switch Product Support Engineer
    NI - USA

  • I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

  • HT5457 would i be better off getting the ipad mini or the ipad 2 upgraded to ios6

    I want an IPAD that is fast and good for education, so I want to know if getting the IPAD mini is better then getting the IPAD 2 upgraded to IOS6 ,and witch one would I be better off getting.

    The iPad mini is basically a smaller iPad 2. However, there are a few differences.
    Compare iPad Specs http://www.apple.com/ipad/compare/
     Cheers, Tom

  • Parallels Desktop, Boot camp or something else

    I am wanting to run Windows on my MacBook Pro - but didn't know what route to go. Has anyone tried Parallels, Fusion, boot camp, etc - What are the pros/cons of them. I am currently running Tiger on mine.
    And just to make sure...I do have to my Windows XP correct - Is there a packaged deal out there where you buy boot camp and XP?
    THANKS!

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
    5. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
    See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.
    Boot Camp is only available with Leopard. The Boot Camp Beta that was used with Tiger has expired and is no longer available for use. So contrary to the other poster's comment, Boot Camp isn't truly "free." You must purchase Leopard to get it.

  • VMware Fusion vs. Parallels (with Boot Camp) -- help please!

    Hello. I have just reinstalled Mac OS X (Leopard) on my MacBook and am looking to install Windows XP SP2. I will be installing a Boot Camp partition -- I know that much -- but I also want to use Parallels or Fusions so that I have the option of running the Boot Camp partition within OS X. Somehow, over my years as a Mac user, I have acquired both of these applications (Fusion and Parallels), and I was wondering if anyone has any information on the differences between the two. Two questions:
    1.) As I just mentioned, I'm just looking for any information on the differences between the two apps -- what features one offers that the the other doesn't -- why I might want to choose one over the other -- and so forth.
    2.) Since I have both apps, would it be possible to have both installed at the same time? In other words, could I have both Fusion and Parallels installed on my computer, and then, when it comes time to open Windows, choose which app I want to open and use? (not sure there'd be any point to this, but just in theory, could it be done?)
    Thanks in advance -- any info in regard to either question is much appreciated.

    Thanks for the replies. Although I've never used Fusion before, I've installed Parallels with Boot Camp partition three or four times before on this computer, and it has always worked great for me, so I know I want to use Boot Camp. And as far as the application goes, sounds like I'll be using Parallels, mainly because it's what I'm used to. That Wikipedia link was exactly what I was looking for -- I had checked Wikipedia before I posted the topic here, but I didn't find that comparison page. Anyways, they look about the same (Parallels and Fusion, that is) for anything I'd be concerned with, but where there were any differences, they seemed to work in favor of Parallels (except for Linux-related features, in which Fusion seemed to have the upper hand, but I don't use Linux). So, again, thanks for taking the time to respond -- much appreciated. Have a good one.

  • Parallels or boot camp and internet connections

    hi.
    i have a macbook and i just purchased a new usb modem made by a company called zte, model mz 16 if it matters. i live in india and bought the modem through a mobile phone company called airtel which, unsurprisingly, only offers drivers and support for windows machines.
    any suggestions on where i can get a driver? or, perhaps. will it work on parallels or boot camp? meaning, if i can install the software via parallels or boot camp can i surf on my mac os rather than in the windows interface?
    thanks for your advice.

    *"any suggestions on where i can get a driver? "*
    ZTE would need to provide the drivers and if they don't make them then you're out of luck.
    *"if i can install the software via parallels or boot camp can i surf on my mac os rather than in the windows interface?"*
    No. You'll only be able to surf in Windows if you isntalled the drivers into your installation of Boot Camp.

  • Parallel vs Boot Camp

    Let me first start by saying I am a newbie to the mac, but I am enjoying the experience so far. The only PC program that I currently miss and need to get back to is MS Money. That would be the only program that I would be interested in running, everything else is fine...so what would the suggestions be, run parallels or boot camp. I know just enough about computer to be dangerous.
    Thanks
    Newbie
    PS I have an intel based imac running 10.5.5

    Hi and welcome to Discussions,
    for only using MS Money I would really suggest to use a Virtualization app like Parallels, VMWare Fusion or VirtualBox (which currently is free to use).
    With MS Money speed is not as important as ease-to-use and with any of the a.m. apps you don't have to reboot your Mac in order to run Windows.
    Best approach to this would be to use VirtualBox to install Windows and MS Money and see how it works for you before spending money on one of the other two.
    http://www.virtualbox.org/
    Regards
    Stefan

  • Windows XP and Parallels or Boot Camp

    I'd like to run Windows on my Mac. I have a Windows XP Home Edition disc in my restoration discs from Gateway. Can I use this disc when I install Parallels or Boot Camp when it asks to insert my Windows disk? Thanks.

    Where is the Gateway? You can't re-use a license for Windows on more than one machine. Since your Gateway license is OEM, you can't legally use it on anything but that Gateway. The disk may or may not work. There is no way to tell. You definitely won't be able to activate unless the Gateway is definitively dead.
    My advice is to get yourself a new, legal license for XP from NewEgg for $137 (XP Pro) or $100 (XP Home). Newegg sells legal OEM versions that are usable. Don't buy anything from Craigslist or eBay.

  • Installing Parallels when Boot Camp already running Windows

    I'm considering installing Parallels on my MacBook Pro, which I already have partitioned with a drive running Windows using Boot Camp. What I need to know is, do I need to eliminate the partition with Boot Camp and if so, will I have to completely reinstall Windows and all my Windows software? I don't want to waste the partition that's dedicated to the virtual drive, rather I'd prefer to have the entire hard drive available to MAC. I really want to have parallels, as it's easier for me to be able to work on Windows and MAC applications at the same time, without having to stop-shut down-restart each time.

    Parallels can use your existing Boot Camp partition for the VM, if that's what you're asking. However, if you want to have all one partition (without the Boot Camp one), then yes, you'll have to reinstall Windows when you install Parallels, unless there's some way to "import" your Boot Camp" setup that I don't know about.
    Message was edited by: Firesign3000

  • Parallels to Boot Camp migration

    I want to migrate from parallels to Boot Camp and do not want to lose my Outlook email or files I have creasted. Anyone have suggestions or has anyone done this with success? Thanks,
    Michael

    I'm still looking for this too...
    Its a real pain in the tush, you still can't convert a parallels disk into a boot camp partition.
    Parallels and VMware can't share the same image.
    but both can boot off a boot camp partition.
    VMware and Parallels can't read eachothers disk format, but can convert it into their own.
    Its a messed up world we live in...

  • I just switched from pc to mac.  what is the best way to keep Windows?  Parallel or Boot camp?

    I have just switched from pc to mac.  What is the best way to keep Windows, Parallel of Boot camp?

    Parallels should be able to handle that without any problems.
    There is a version of both of those that will run on the Mac. So you might consider upgrading to that version instead of going with Windows on your Mac.
    Allan

  • Would I be better off with a 7200rpm HD or a SSHD for Logic?

    I'm looking to upgrade the hard drive in my Macbook Pro and I'm curious as to whether an SSHD would be beneficial over a standard hard drive. The two options I'm looking at are either a 7200rpm hard drive or an SSHD hybrid drive that combines an 8GB SSD with a 5400rpm drive.
    SSHD's are slightly more expensive and they seem like a good idea but I'm not sure if I'd get the benefit of the small SSD portion for using Logic or if I'd be better off with a 7200rpm drive.
    I should add that I also need at least 500GB of storage so I've ruled out SSD's at this point.

    I would say that it depends what you're doing, For my audio work i used to run a Mac Pro, then went to an iMac, and now do virtually everything from a Mac book pro with the standard 5400rpm hard drive.  I had plans to put an SSD in there, but i thought i would see how it went first.
    I use predominately hardware synths, real guitars and vocals.. The only real sampling software i've used in the past has been Steve slate drums.  Recently i got into Omnisphere..  And i've got to say that i've never once had an issue with the 5400 drive.
    On average i would say that i have around 4 guitar tracks, 3 vocal, 3-4 synth and a drum track playing at once, and never experienced a drop out in 18 months (The life of my MBP so far)... Obviously these tracks are spread out into more, but at any one time i can't imagine much more playing simulatenously.
    So.. If you're my end of the scale don't go spending out too early.
    Take Art's advice too, Firewire is a great option, i use that for video work where the HDD speed has been an issue in the past, and the FW drives are simply superb performers.
    Big sample based soft synths that stream direct from disk... If you're using those, then i will second the FW Drives for audio work.. However, looking at the specs in your sig if you're running from a 2.26 Core2Duo machine i would imagine the processor would go before the drive on any heavy softsynths.
    Probably best to go up to 8gb if you can on that machine?
    Also, having performed a 7200rpm upgrade on an older macbook 5/6 years ago, be aware that it can add unwanted vibration and noise, have a negative effect on battery life and/or cause heat build up.  Drives are much more efficient nowadays however, so not sure how many of those issues still exist.
    It's not just down to cost why the 5400's go into a macbook.
    Have you also considered stripping the DVD Drive out and placing an SSD in there?  If i was to do any change on my MBP that would be the one i would perform.

  • The Apple shop loaded a German version of iTunes, how do I convert to English. Would I be better off deleting iTunes

    The Apple shop installed a German version of iTunes, how can I convert it to an English version - or would it be better to delete the German version and download a new iTunes?

    There is only one version of iTunes. Relaoding will simply load the same iTunes.
    In iTunes, select the iTunes store on the right.
    Scroll to the very bottom right.
    Click the ball icon that has a flag and select the iTunes country you want.

Maybe you are looking for