Would it be possible to export only one response, such as only the highlighted one?

You can use the "Show details" option in the View Responses tab:
Once you activated the detail view, you can export the detail view (that contains a single response):
thanks
Roman

Similar Messages

Speak only the highlighted text in TextEdit

I would like a script that speaks only the highlighted text in TextEdit.
I found this script at MacScripter, written by kai. Can it be tweaked.
Thanks,
Tom
set text_buffer to 5 (* avoid attempts to speak just a few new characters: modify as required *)
set previous_count to 0
activate application "TextEdit"
-- repeat
tell application "TextEdit" to set current_text to document 1's text
set current_count to count current_text
if (current_count - previous_count) > text_buffer then (* some new text was added *)
set current_text to current_text's text (previous_count + 1) thru current_count
else (* we've reached the end of the document so far *)
delay 1.5 (* pause before restarting entire text *)
end if
set previous_count to current_count
say current_text
-- end repeat

There doesn't appear to be a selection item in TextEdit, so just highlighting some text isn't going to work. If you were to copy to the clipboard, then you could do something like:
say (the clipboard) as text

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or mu

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or music?

Although not recommended, yes.
Disable automatic syncing when the iPhone is connected with iTunes on each computer.
The only item you will have selected for syncing with iTunes on your computer at work will be Calendars, which is selected under the Info tab for your iPhone sync preferences with iTunes. Nothing else will be selected under the various tabs for your iPhone sync preferences with iTunes on your computer at work. You will get a warning message that your iPhone is associated with another iTunes library on a different computer which you can ignore when syncing calendars/calendar events only with iTunes on your computer at work.

SPA 9000 - Is it possible to use only the FXS lines (a la SPA2102) ?

SPA 9000 - Is it possible to use only the FXS lines (a la SPA2102) ? At this moment I have not received the 9x2 series phones I ordered, but am trying to set up the SPA9000.

yes, it would work.

How to export only the displayed data to excel

Hello, APEX experts:
Currently, APEX export to excel functionality can export all data defined by the report query, no matter they are displayed on screen or not.
Is there a way to export the displayed portion only?
Thank you.
shiofan

Hi! Thanks for the reply.
From what I see, the include in export and show in report are independent since I can export columns which are not shown in the report and also some displayed columns are not included in the export.
Let me restate what I'm facing:
I'm using APEX 3.2 with standard report.
Let's say my report query returns 50,000 rows, but display only 500 rows per page. I'm using one of the APEX built in pagination scheme.
The default Export to Excel functionality will export all the 50,000 rows to an excel file. But my customer says, he does not want so many rows there. He want only the rows displayed on current page be exported. In other word, if the report is currently displaying rows from 501 to 1000, then the exported excel file should contain only the rows from 501 to 1000.
As you may says, why not just add another data filter to limit the output size? I agree, that should be the normal practice. But my customer want no more query conditions but export only the portion he see on the screen.
More idea?
Thanks a lot.
Shiofan

How to export only the data displayed in table of a jsp page to Excel

Hi All,
I want to export only the data that is displayed in the table of a jsp page to excel. But with my current code everything is getting exported to excel.
<input type="checkbox" name="download" onclick = "form.submit()"/> Export to Excel
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition", "inline; filename=fileName.xls");
the table is displayed in the jsp using the following code:
<table cellspacing="2" cellpadding="3" border="1"
width="100%"> <tr> <%for (int i = 2; i <= cols; i++) {%>
<td>
<%
out.println( rsmd.getColumnName(i) + " ");
} %>
<% while (rsettaba.next ())
out.println("<tr>");
for (int j= 2; j <= cols ; j++) {
//out.println("<td>"+rsetallcl.getString(j)+"</td>");
String varnl = rsettaba.getString(j);
if ( varnl == null )
out.println("<td> Empty </td>");
else
out.println("<td>"+rsettaba.getString(j)+"</td>");
out.println("</tr>");
%>
</td>
</tr>
</table>
please can anyone help how to just extract only the data in the table of a jsp page to excel.
Edited by: Ramky48 on Dec 9, 2009 9:51 PM

Ramky48,
Why did you open a new thread when you had gotten quite a few responses and suggestions on the [url http://forums.oracle.com/forums/thread.jspa?threadID=998411]thread where you asked the same question - seems the best thing to do would be to continue on the same thread?
However, your question has nothing to do with JDeveloper/ADF. If you'd like to do it the ADF way, it's trivially easy - you can use the [url http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_exportCollectionActionListener.html]af:exportCollectionActionListener component, which does what you are asking for. If you want to use a straight JSP way, there were several good suggestions in the other thread you opened, or Googling "jsp export to excel" will get you about 4.6 million hits; the first 10 or so look pretty promising.
John

Import/export only the stored procedure from DMP

Hi all,
pls tell how to import/export only the stored procedure from a DMP file.
Best Regards,
Subir

pls tell how to import/export only the stored
procedure from a DMP file.If you on 10g or above use expdp / impdp for import/export only the SP.
Overview of Oracle Data Pump
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com/

Is it possible to scale only the weight of strokes without the objects?

I have a lot of line drawing illustrations each made with various weight strokes. Each illustration looks good by itself but when compared some look with overall thicker or thinner lines and I want to make them look the same because all will be used in the same book. To scale the weight of the strokes I make a scaled copy of each illustration and then select a line or set of lines selected using same -> stoke weight and with the eyedropper copy the style from the scaled version. This is a lot of work and I would like to know if there is a faster way to do this. Ideally I wish it was possible when using the scale tool to have the option to scale only the strokes with the same percentage.

...all I had to do was scale them with Scale Strokes & Effects turned off.
Not quite the same thing. Using just one step in the situation you described only works because you had the forethought to use the same stroke weights on the two differently-scaled drawings. If you had used different sets of stroke weights in the two drawings, and needed to scale them to similar size, simply turning off Scale Strokes would not suffice; thus the workaround described.
Example:
You draw a camshaft using stroke weights of 1 pt. and 2 pt.
From another original, you have a rocker arm also drawn using two stroke weights, but of .75 pt and 1.5 pt. The rocker arm is also drawn to a different scale, three times that of the camshaft.
You need to combine the camshaft and rocker arm in the same drawing.
Simply scaling the rocker arm to 33.3% with Scale Strokes turned off would not serve. The rocker arm would still have stroke weights lighter than those used in the camshaft. So you:
1. Note an overall dimension of the rocker arm drawing.
2. Scale the rocker arm to 133.33% with Scale Strokes on.
3. Scale the rocker arm back to its original size by keying the noted dimension back into the H or V dimension fields, with Scale Strokes off.
4. Scale the rocker arm to 33.33% with Scale Strokes off.
Even the workaround will not truly serve if the stroke weights used in the two drawings being merged are not proportional. For example, If the camshaft had been drawing using stroke weights of 1 pt and 2 pt, but the rocker arm had been drawn using .75 pt and 2 pt.
The underlying lesson is that it's advantageous to structure drawings using Graphic Styles, just as it's similarly advantageous to always use paragraph and character styles--even when you think you don't need them.
So GSI's desire for a sensible, no-nonsense setting that allows you to scale strokes without scaling paths is quite legitimate. This could be implemented as simply as:
Change this:
to this:
...and make the checkboxes behave like checkboxes are supposed to (non-exclusive), rather than like radio buttons (mutually exclusive).
Given several drawings (ex: a set of cartoon figures drawn at different times and/or from different sources) all drawn in loosey-goosey, artsy-tartsy eyeballed fashion with no structure whatsoever in terms of defined (and therefore selectable) styles, one could at least scale the various drawings to commensurate proportion and then just the stroke weights based on percentage of their original weights, and at least make the combined drawing more convincingly consistent. A "Sameness" slider could even be provided to skew the scaling of thin versus thick weights.
Failing that (as is no doubt certain), this feature could be built with Javascript. But the result of doing so would be far more elegant if one could get the Palette object of ScriptUI to work worth a dang.
JET

HT4914 Is it possible to make only the media on my computer show on my devices when iTunes match is activated so i don't have the thousands of songs of my whole family on my phone?

I share an apple ID with my whole family, therefore there are hundreds of playlists and thousands of songsfrom the many computers. Can I make it so that only the playlists and songs from my computer to which my devices are synced to, are the ones that show up on my devices with out having to sync them all to my phone, ipad, etc.

iTunes match will only work from a computer in terms of uploading new content. You should be able to copy iTunes purchases back via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). For content from other sources there are some third-party programs listed half-way down this page which might help you get your content back from your phone : https://discussions.apple.com/docs/DOC-3991

It is possible to copy only the response in web console?

Ctrl+C an item in web console copies both time and response, example:
[13:28:58.020] function alert() {
[native code]
How to copy only the response?
function alert() {
[native code]
}

That isn't possible AFAIK.<br />
Firefox 26 will have the possibility to select part of the text, so you can leave out the time stamp and only select what you want.<br />
The current Nightly build (28.0a1) can suppress the time stamps via the toolbox options, so you do not even see them anymore.

Is it possible to update only the Shared Install component?

We are running MDM 7.1 with all components at 7.1.06.211. We opened an OSS ticket due to an issue with CCMS monitoring and SAP told us to upgrade the MDM Shared Install component to at least 7.1.06.230. We want to use sapinst --> update to apply the patch but cannot find a way to select only the shared install component. Is the correct procedure to:
1. In sapinst on the "Update - MDM Instances" screen, select "Update all MDM instances of the SAP system" (MDS00, MDIS01, MDSS02)
...and then...
2. In sapinst on the "Update - Content Archives" screen, extract only the shared.sar archive and deselect the others (mds.sar, mdis.sar, mdss.sar).
Will this procedure update the shared installation component only and not the others? Is this possible? If not, will all of the other components have to be updated even though SAP said to update only the shared installation component?
We have searched OSS and SDN but cannot find a clear explanation of how this should work. Note 1481741 states that all components within the same SP level (e.g. 7.1.06.xx) are compatible and recommends upgrading only the component affected by the fix, which is what we want to do.
Any help will be appreciated.
Thanks and regards,
WL

Camoracer got it - my work computer has limited hardware/system resources. It can handle iTunes audio, but iTunes video slows it to a crawl and makes it so I can't get any work done. There are video podcasts I'd like to listen to at work, but can't for that reason. So I'd like to just play the audio stream from the podcast while disabling the video stream. The video portion isn't necessary anyway, it's usually just a talking head and not anymore informative than the audio portion alone.

PPCS3 won't export only the work area to media encoder

I can't figure out why Premiere Pro CS3 is no longer exporting the work area to the media encoder. I CAN successfully export the work area to Encore but even when I select WORK AREA under the RANGE option in EXPORT SETTINGS the media encoder still shows only the entire sequence.
Same results on any sequence or project I've tried.
Any suggestions?

Are you sure you're not confusing the sequence In and Out Points with the Work Area Bar? I've seen people make that mistake before. The Work Area Bar is what controls the "Work Area" export.
If it's not that then you have a real mystery on your hands. :o
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Is there a possibility to clear ONLY the COMPLETED downloads when a button is clicked in firefox?

is there any way (natively, or by using an extension) to clear ONLY the COMPLETED downloads when a button is clicked in firefox. it should not clear the paused, failed or cancelled downloads. - similar to the functionality in INTERNET DOWNLOAD MANAGER software by TONEC. i have searched lots but could not find such a function. :(

Along the lines of cor-el's last post, if you want to delete most of the downloads, you can select the entire list using Ctrl+a then Ctrl+click the ones you want to exclude from the selection.
In some cases, Firefox supports "places queries" to drill down on specific kinds of history. However, I didn't see one for downloads documented in the MDN article, so I'm not sure whether there is a way to query just for successfully completed downloads.
https://developer.mozilla.org/en-US/docs/Mozilla/Tech/Places/Places_query_URIs

I have downloaded a pdf from a jounal web site. After doing this and inserting comments, then saving it, upon opening it again, i can no longer see the text but only the highlight changes that i made

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

I am using Adobe Acrobat Pro XI. I have downloaded a pdf from a journal web site. I need to review this article and make comments in the text. After doing this and saving the file, when opening the saved file, I can only see the highlights where I made changes and the list of comments that I made, but I no longer see the original text. See the example below. Can anyone help on this?

Is it possible to export only selective bookmarks?

Hi,
Can I export selective bookmarks e.g. rather than backing up all bookmarks? i.e. select multiple folders and just back up all bookmarks within the selected folders (in either either JSON or .HTML format).
It might be possible to do so or maybe there is an add-on that can do exactly this?
Actually I tried it by selecting only one (1) folder but the size of the exported .json and the .html file was exactly the same as the size of the total back files.
thnk you.

thnks so much again cor-el. Looks like you are the only person supporting FireFox :) but you are doing a wonderful work. So thnk u for all the help. I will try the solution later.

Would it be possible to export only one response, such as only the highlighted one?

Similar Messages

Maybe you are looking for