Would like to use HTML in 6.0

Hi, Again (already)?
Kind of a corollary to my previous question (how to access
old RoboHelp projects): Apparently, Word is the default editor for
this package, but I've been using HTML, and would like to continue
to do so ... is this a problem?
Thanks again,
Lon

Hi Lon
In case Lori's suggestion wasn't what you were looking for,
you may also be seeing a feature of RoboHelp HTML. This feature
allows selection of alternate HTML editors if you so choose. Well,
actually it's the default.
What RoboHelp HTML does is looks at the meta tag inside the
HTML code to see which editor created the file. In your case, it
may be sensing Word and instead of opening the HTML topic in the
RoboHelp HTML WYSIWYG editor, it opens Word.
If I've understood this correctly, here is the fix. Within
RoboHelp HTML, click Tools > Options... > HTML Editors tab.
Ensure RoboHelp WYSIWYG is the default editor. It should be as
that's the default. Now look near the bottom of the dialog. You
should see two options. One labeled "Auto-select Editor" and
another labeled "Use Default Editor". My guess is that Auto-select
is configured as it's normally the default. So choose "Use Default
Editor", click OK and you should be set. Unless, of course, I've
misunderstood the situation.
Cheers... Rick

Similar Messages

I would like to use a video my grandson posted on FaceBook in my iMovie. I saved it to my desktop, but it will not drop into iPhoto. The format is video.php.html.

I am using a MacBook Pro OK X Version 10.9.5. Processor 2.8 GHz Intel Core 2 Duo
Memory 4GB 1067nMHz DDR3
iPhoto Version 8.1..2
My grandson posted a video on FaceBook that I would like to use in my Christmas Memories movie. He use a Kindle Fire HD. I downloaded it to my desktop (video.php.html), but I cannot save it to iPhoto. What should I do? Thanks.

Miriam Griggs wrote:
…a video on FaceBook that I would like to use in …video.php.html...
what you downloaded is no video (just some link to an 'internal website hosting the video'...
it's a bit tricky, to pry a video from FB's dead cold hands...:
click on the video for playback in your web-browser. (no need to run the full video)
replace the "https://www.facebook.com/…"
by "m.facebook.com/…"
the same site appears in a diff. 'look'…
right-click/ctrl-click on video, select 'download to'.......

I have saved My Google Chrome bookmarks as HTML and want to import them into my mozilla bookmarks, when I go to import HTML it seems to load somthing but when I go back to check my bookmarks in mozilla they are not there. I would like to use mozilla more

I have saved My Google Chrome bookmarks as HTML and want to import them into my mozilla bookmarks, when I go to import HTML it seems to load something but when I go back to check my bookmarks in mozilla they are not there. I would like to use mozilla more often then Chrome so I need please help keeping my Chrome bookmarks.

@Carolyn:
Yes, I did search before but restricted it to the past month, because I had the feeling that it’s worse now since the update to 5.1.10, but I may be wrong.
It seems this is an old and unsolved common problem.
@andy:
“Top Sites” is hot, but I’ve never used that funny dots without any mouse-over text.
After deleting (before starting Safari) it’s restored by a default TopSites.plist, it seems these cookies
- are only reloaded when viewing the Top Sites (?)
- are not among my reappearing cookies, I have never seen such a cookie / cache on my system before (e.g. expedia, orbitz, monster, usatoday, disney, craigslist).
And Top Sites would not explain why the Web Inspector has different infos regarding use of cookies and local storage than Safari’s “Privacy” tab.
After playing with deleting TopSites.plist, without surfing, suddenly I have ”121 cookies or other data” at Safari’s Privacy tab, nearly all are listed as “Cache” or “Cache, Cookies” but the Web Inspector doesn’t show any of them, only my google.co.uk items.
---> Thanks, I’ll send a feedback to Apple.

My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

I would use Quicktime Pro.
See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923 (Quicktime 7.6.6 is the latest version.)
To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

Would like to use CS6 on Mac OS and W7 w/o buying two CS6's.

Purchased CS6 Student & Teacher addition for Mac OS at school, but would like to use with Windows 7 as well, when I get home. Is there a way to do this without purchasing two licenses?

Ned is correct the CS6 Student and Teacher edition is platform specific. I would recommend that you look at Creative Cloud which allows you to install on both platforms. We do also have a discount available for education users. You can find more details at http://www.adobe.com/products/creativecloud.html?promoid=JQPEQ.

I would like to use Automator

I would like to use Automator or something else to automatically copy and save photos from a website on my HD.
There's a site with a great number of photos (museum showing photos, paintings, all in JPEG) and I would like to create a program that will copy/save a photo, then go to the next one, and the next one, and so on. And if possible to the next page after that. So I don't have to spend hours and hours doing this.
After it is downloaded I will look what I want to keep and what I want to delete.
They say Apple Script is simple and Automator even simpler...well, maybe I was tired when I read about these two programs in the Mac OS X Bible (Tiger edition) but it doesn't seem that simple.
Anyone did this by any chance ?(copying photos from the Web ?)

If you're using Word 2011 and have the freeware CUPS-PDF virtual printer* installed . . .
Workflow:
1. Get Specified Finder Items (or equivalent action)
2. Open Word Documents (under the Library/Documents actions that Office 2011 installs)
3. Apply Font Format Settings to Word Documents (ditto)
4. Print Word Documents (ditto)
In step 4, you'll want to direct the documents to "print" with the CUPS-PDF printer.
You needn't be concerned with deleting "personal information" stored in Properties. That information isn't retained in the PDF anyway.
Tested with 10.6.8 and Word 2011.
* Get the CUPS-PDF virtual printer from https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/wiki/Home. Here's a slightly dated description of what CUPS-PDF does and ways to tweak it: http://www.macworld.com/article/1139518/cupspdf.html.

Would like to use song from Itunes as background music for blog, How do I?

Would like to use a song I have in my Itunes library as background music in my blog. Does anyone know how? New to computing and not great on the lingo just yet. Thanks

I'll give you my recipe to attain your goal. Then, please, tell me if it worked.
First of all, you need some MB of disc space on the web, and almost all of the e-mail providers (such hotmail.com, msn.com aol.com andso.on) can give you this chance.
Second step, you have to download, install on your computer and set with your web space information, an ftp browser such as SoftX FTP Client ( http://www.softx.org/ftp-download.html ) or Terrapin FTP Browser ( http://www.pcadvisor.co.uk/downloads/index.cfm?categoryID=1470&itemID=6574 ).
Third step, you have to reduce the mp3 bitrate of your song whether it's more than 128 kbps, to make sure it won't be too heavy to load when someone visit your blog. To do this, you must open the Preference panel of iTunes (in Windows version of it usually in tools menu), click on advanced, click on import and then choose import using mp3 encoding and set the bitrate to 128 kbps (less is better) and confirm. Now select your song, right click on it and click on convert selection to mp3. When the operation will end, you'll have two files of the same song. Right click on the new one and click on "show file". An Explorer window will open with the right file already selected. Just drag and drop it on the FTP browser (is better if you correct the name of the song and put out spaces between the words before the uploading - i.e.: "Storm in a tea cup.mp3" will become storminateacup.mp3 or storm.mp3, far better) and it will be uploaded to your web space. Obviously, if your file is already at a low bitrate (lower than 128), you must jump the "Preference panel setting" step and the "convert to mp3" step.
Final step: your blog
this is the standard html syntax, accepted by almost all of the blog providers:
'<embed src="http://YOURWEBADDRESS/NAMEOFTHESONG.mp3" autostart=false loop=false volume='85' width=425 height=40>'
Be careful: you have to write correctly your web address and the name of the song, because the html language is case sensitive.
put autostart=true if you'd like to hear the song as you open the blog and loop=true if you like to hear your song again and again. You can also set the volume as you like (0-100 is the range) and put to 0 both width and height if you like to make the song bar invisible.
You can put the code either in a post or in the blog page, as it will be the soundtrack for the blog or just for a single post.
Enjoy it
slowly, slowly catch the monkey

HT1438 I would like to use my Ipad mini to connect to a project can this be done?

I would like to use my ipad mini to connect to a projector can this be done?

Depends on the projector.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htmhttp://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.phphttp://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.htmlhttp://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/http://www.apple.com/airplay/
http://www.apple.com/airplay/http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
 Cheers, Tom

Would like to use SUN Jato GUI Framework in my app

Hi Everyone,
not sure if this is the correct forum to post this..
i have an existing web app that i would like to use the jato framework.
i took a simple page from the jato/glassfish app: welcome.jsp/.java and copied it to my app directories (also copied the needed, tld's jars etc)
i googled and only get 1 hit to the error message which really didn't help me.
exception
javax.servlet.ServletException: javax.servlet.jsp.JspException: The request context is null - this page must be accessed through a servlet
root cause
javax.servlet.jsp.JspException: The request context is null - this page must be accessed through a servlet
com.iplanet.jato.taglib.UseViewBeanTag.doStartTag
i looked at the jatosample application, but am trying to figure out what it is I need. obviously its a servlet but what,where, how,why
<code>
<html>
<%@page info="HelloWorld" language="java"%>
<%@taglib uri="/WEB-INF/tld/jato.tld" prefix="jato"%>
<jato:useViewBean className="jatosample.module1.HelloWorldViewBean">
<head>
<title>JATO Sample Application</title>
</head>
<body>
Hello, world!
</body>
</jato:useViewBean>
</html>
</code>
any guidance appreciated.
Johnny
Message was edited by:
sticcino

I don't use that device, but two links with more information
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

HT2477 I have a new MacBook Pro which has Windows 7 installed so I have only ever used it as a PC, I would like to use the apple system but was never shown how to do this and I cannot even work out how to switch it on . If I just press power iI get wind

I switch the power on on my MacBook Pro I get windows7
this is no problem but I love my IPad and would like to use the apple system on my MacBook .
CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
I Would be very pleased if someone can advise me
best regards
TOm

Reboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.

I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all help

The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource.

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I installed the latest version of Firefox and it opens to google. I would like to use my old Sbcyahoo home page as the default page. How do I change

I installed the latest version of Firefox. The home page is now a google search box. I would like to use my old sbcyahoo desktop with its icons. I am unable to make the change.

Oops. I could have been more clear, sorry.
TOOLS > OPTIONS > GENERAL tab
Under Start-up at the top of GENERAL, you have an option to type in the url or use the tabs to set your homepage to the current page.
Go to your chosen site, open OPTIONS and click 'Use current page.'
Sorry for the shorthand version previously. I blame the cat.

I have a Samsung Laptop but would like to use Cinema Display with mini displayport. Is that possible?

I have a Samsung Lap top but would like to use Cinema Display. The only connections on my lap top is HDMI and VGA. How can I get it to work?

Thanks Malcolm. I saw this on the apple site
Kanex C247D Single-Link DVI to Mini DisplayPort Converter
Will that work?
I also spoke to someone at apple..They told me to get 2 cables. Mini DisplayPort to Dvi and Dvi to Hdmi..Connect the 2 and it will work...Do you think it will work? Just to save$$$

HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
https://discussions.apple.com/message/17777381 - making a ringtone
Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

Would like to use HTML in 6.0

Similar Messages

Maybe you are looking for