Would these Viewsonic Monitors work with the Mac Mini?

Hi,
I ordered the latest mac mini and I need to order a monitor...Due to my budget constrainsts I cannot order a Dell Ultrasharp, so I'm looking at a viewsonic...
.I want to do some webdesign on it, so I don't need a lot of color accuracy  ....But would this work with the Mac mini?
ViewSonic VX2363smhl-w 23-Inch SuperClear IPS LED Monitor  1920x1080
do I need to buy any type of cable?   the conectors it has are
15-pin mini D-sub (VGA) / HDMI (x1) , HDMI/MHL (x1)

Those monitor's will work fine.
One will connect to the Mac Mini's HDMI output port using the supplied HDMI cable.
For the other you will need either a Mini DisplayPort to VGA adapter or better yet a Mini Display Port to HDMI adapter.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?mco=M TA4OTEwNjA
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k
Either will work for the second monitor, but personally I would go with the (Digital) HDMI adapter instead of the (Analog) VGA adapter.

Similar Messages

  • Does The Apple USB Modem Work With The Mac mini ??????

    Just wanted to know if anyone has successfully used the new Apple USB Modem with the Mac mini, is it compatable ????
    Thank you for your input on this.
    Mike D.

    It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
    Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
    [ Edited by Apple Discussions Moderator ]

  • Is there a USB 3.0 Hub that really works with the Mac Mini?

    My Mac Mini's four USB 3.0 ports work fine with my four USB Seagate GoFlex 3.0 hard drives. The drives mount at startup, and perform at expected USB 3.0 speeds. But, when I connect the drives to a USB 3.0 HUB to free up the Mac's USB ports for other devices, typically two of the USB Seagate drives will mount at startup, but two won't. There's a fix for this: after startup, I simply disconnect AC power from the drives that didn't mount, and reconnect the power a few seconds later. Now all my drives are mounted, they perform properly, and other USB devices connected to other Mac Mini USB ports (a mouse, a USB midi interface) work just fine as well. It's annoying, though, to have to perform this extra disconnect-reconnect step every time. I've tried two different USB 3.0 HUBs -- one from Uspeed and one from Satechi -- and I have exactly the same problem with both. Question: Is anybody else experiencing the same thing with a late 2012 Mac Mini and a USB 3.0 Hub? Has anybody found a 3.0 Hub that doesn't have this issue with the Mac Mini?

    The USB 3.0 hub instability problems extend beyond the Mac-Mini, as addressed below.
    At long last we're seeing progress in getting 2012 Macs to work with USB 3.0 hubs. As discussed on this and other discussion groups I've had a horrible time with my MacBook Pro Retina  being unstable with USB 3.0 hubs. I know many of you have also or you wouldn't be reading this posting. 
    In June 2012 I bought one of the first 2012 MacBook Pro's with a Retina display. It's been a battle since with Apple selling what appears to be an incompatible or unstable system to effectively communicate with the USB 3.0 hubs. You'll see vendors now making comments that Apple is the source of the problem.
    I've been through USB 3.0 issues with two MacBook Pro Retina laptops. I've also tested a Uspeed hub, with 3 portable USB 3.0 drives connected, at the Apple Store. This was on a newer model MacBook Pro Retina, and also on a 27" iMac. All had instances where drives failed to mount during the short period allowed for testing. (Because of time constraints, we were unable to test at the Store for spontaneous and unprovoked unmounting of drives connected to the hub. These problems have existed since the beginning on my rMBP.)
    I am now on my 20th hub that has been purchased, or provided for testing. They varied from 4-Port to 10-Port powered hubs and involved 11 brand names. Comments were posted on Amazon, Tiger, and others for most of the ones purchased, and some that were tested. Some, like the HooToo specifically warned against use with Macs in the manufacturer's manual and, as I learned, for good reason. That was reflected in my comments for the drive on Amazon.
    The Plugable 7-Port USB 3.0 powered aluminum-finish hub that I have been testing since October 13 was provided  by Plugable after the first one, purchased through Amazon, was returned as unreliable. This 3rd, and newer generation Plugable hub uses the VIA VL812 chipset with the new version 90.81 firmware. My experience over the last 4+ weeks with this hub has been solid. While there have been problems with Eject errors, none were traced to the hub electronics. (Problems with intermittent connections at the cable connectors  appeared to be the cause of the disconnect errors. Almost all of the failures were traced to intermittent Micro-B connectors, but that's another story.)
    In addition to the greatly improved reliability of this hub, I find several features of this Plugable to be a plus including:
    The plug engages fully to the "hilt" when plugged into the hub giving a solid connection, as occurs on the MacBook Pro Retina USB 3.0 ports. Others hubs typically had a gap between the "hilt" of the connecting end, and the hub allowing for lateral movement. With some hubs this allowed for intermittent connections if the cable was disturbed.
    The on/off switch on the hub allows the hub to be powered down when not in use.
    The full size Type-B connectors on the cable at the hub end engage solidly. Hubs with Micro-B connectors have presented intermittent connections in the cable connector.
    The aluminum case looks attractive with Macs, IMO, but not a reason to buy.
    Overall, Plugable's support is the best I've encountered. I've found their response to questions to be prompt and thorough. This, coupled with their online support articles has put them at the top of my list. They provide news and information that I've not found with other hub vendors.
    The article titled "Plugable USB 3.0 7 Port Hub Firmware History" at the below link gives insight into the history of the problems that we've been having with the USB 3.0 hubs on Macs and the firmware updates, regardless of the brand of hub you have.  Apparently, if you have the VIA VL 812 chipset, firmware version 85.81, you're in safe territory.
    http://plugable.com/2013/10/30/plugable-usb-3-0-hub-firmware-upgrades2
    (One of the Plugable hubs appears identical to the black 7-Port Uspeed hub, and both use the VIA VL 812 chipset. They appear to be from the same manufacturer with the real difference appearing to be in the VL812 version of the firmware in the hub.)
    Some of the firmware can be upgraded, and some can't. Contact Plugable or Anker if you're affected.
    Uspeed has made improvements, but they were still unstable as of the last one I received for testing. In her last reply on 10/13/13 Sunnie with AnkerDirect Customer Support stated:
    Unfortunately, the new Firmware version (908x) does not work with the model "68UNHUB-B7U" you have. The hub bellow has much less complaints about Mac issue. We suggest that you order this one.
    http://www.amazon.com/gp/product/B009Z9M3DY
    AnkerDirect Customer Support
    Note that the above hub recommended by Anker has an 8th port just for charging iOS devices. Some will see this as a plus. However, the lack of such a port is not seen as a big problem. It's easy and relatively inexpensive to purchase extra 5V power adapters for charging, which is my preference. Plugging and unplugging devices on a hub that is powered "On" presents the potential for movement of the cables. This could interrupt a cable connection  and disconnect a drive during data transfer resulting in corrupted files. With 7 and 10 port hubs, and all the cables needed, this gets risky.
    I believe the USB 3.0 hub issues we're having are the result of poor design of the Mac's USB 3.0 implementation at the start. Unstable hubs that I've had a friend with Windows 7 test, said they "performed like a dream" on his PCs. This indicates the problem is with Macs, not the (twenty) hubs I've used.
    A statement from a support person dealing with USB 3.0 hubs tells what's I've long suspected: " -- the evidence is pointing to something specific to the Apple design (perhaps external to the chipset, like the signal re-driver….."
    If you're having USB 3.0 problems, be sure to let Apple know by sending in a Feedback comment to Apple at:
    http://www.apple.com/feedback/ 
    I'm told they read and treat the feedback seriously (although the duration of this USB 3.0  problem makes me wonder if Mavericks and iOS 7 haven't had a higher priority and distracted from this. Microsoft got USB 3.0 right, how about it Apple?)

  • Does the Travel Kit work with the Mac mini?

    Hey guys,
    I wanted to know if the Travel Kit that Apple sells would be compatible with the Mac Mini. I am thinking of buying one in the US for money's sake, and I live in the UK. I just wanted to make sure that if I did get it, it wouldnt be a waste of money.
    Thanks.

    Hello,
    It doesn't appear so...
    http://store.apple.com/us/product/MB974ZM/B
    This accessory is compatible with the following:
        iPhone 4S  
        iPhone 4  
        iPhone 3GS  
        iPhone 3G  
        iPhone  
        iPod touch
    4th generation  
        iPod touch
    3rd generation  
        iPod touch
    2nd generation  
        iPod touch
    1st generation  
        iPod classic
    120GB 160GB (2009)  
        iPod classic
    160GB (2007)  
        iPod classic 80GB  
        iPod nano
    6th generation  
        iPod nano
    5th generation (video camera)  
        iPod nano
    4th generation (video)  
        iPod nano
    3rd generation (video)  
        iPod nano
    2nd generation (aluminum)  
        iPod nano
    1st generation  
        iPod shuffle
    4th generation  
        iPod shuffle
    3rd generation  
        iPod mini  
        iPod
    5th generation (video)  
        iPod
    4th generation (color display)  
        iPod
    4th generation  
        iPod
    3rd generation  
        iPod
    1st + 2nd generation  
        iPad
    1st generation  
        iPad 2
    2nd generation  
        iPad
    3rd generation  

  • What Monitors WILL work with the Mac-Mini?

    If the new Mac-Mini does not put out analog video and Apple does not state this, what monitors will work with it?

    I was able to get an Apple Studio Display to work via the adapter in the Mac Mini box combined with that huge DVI to ADC adapter they had sold me years ago. In the Apple Store I really had to press them to assure me my display would work as they told me they'd charge me a re-stock fee if I had to bring the Mini back. I pressed the point that Apple should know if a monitor it made works with a computer it made. The rep asked around and we both searched the web and then she was able to confirm it would work. They really need a list of acceptable monitors. If anyone locates such a list, please let us all know!

  • HOW DOES THE NEW MBOX 2 MINI WORK WITH THE MAC MINI?

    I have a old original Mac mini 1.25GHz with 1 GB SDRAM - 40GB Ultra ATA drive, 4x SuperDrive (DVD±RW/CD-RW) OS 10.3
    I also have just added the new MAC MINI 1.66 CTO OS 10.4
    with the following configuration:
    * Processor 065-6673 1.66GHz Intel Core Duo
    * Memory 065-6676 1GB 667 DDR2 SDRAM-2x512
    * Hard Drive 065-6750 120GB Serial ATA drive
    * Optical Drive 065-6679 Combo Drive
    In addition, I have a MicroNet 150 GB external hard drive.
    The 3 are linked together so that the icons for the MircroNet and the old Mac mini are shown on the New Mac mini desktop.
    I’ve kept the New MM as is for apps, moved most of the files and folders to the MNet, and have done a reinstall on the old MM, getting rid of almost everthing that was on it originally except the OSX and apps.
    I’m thinking about using the old MM to set up a recording studio. This would involve the new MBox 2 Mini with ProTools LE. For details, just Google it. It comes 2 ways, configured for the G4 MM or for the new Intel MM. I’d rather not clutter up the new MM with this, as sometimes the Digidesign Pro Tools apps can be a bit toxic.
    If I get the MBox 2 Mini and run it on the old MM, will this work? Has anyone tried this? Do I have enough processing power and speed, ram and hard drive space?
    Thanks!
    Larry Miller
    Cambridge MA
    MAC MINI 1.66 Intel Core Duo, Mac mini 1.25GHz MicroNet 150 GB external hard drive.   Mac OS X (10.4.8)  

    Hi Larry,
    I just purchased a Mbox 2 Mini. I am running it flawlessly with my Core Duo 1.66Ghz Mac mini w/2GB RAM.
    I have not seen the two versions for Intel and PPC Macs as you described. Digidesign only produces one box...compatible with Mac or PC.
    The Digidesign site states that the Mbox 2 Mini is compatible with your 1.25GHz mini, but Pro Tools LE 7.3.x requires Mac OS X Tiger 10.4.x, not Panther 10.3.x.
    You would get far better perfomance using the Intel mini over the PPC. And, you would get better perfomance by maxing the RAM out as well.
    C

  • I have a Cinema Display M8149. Will this work with the Mac mini?

    I have the first generation of Cinema Display M8149 and it is still working beautifully! I need to upgrade now my first gen G4 and I am wondering if I buy a mini will the display work with it? If yes, do I need to buy the newest mini or could I buy a used or refurbished older mini and have the monitor still work. What adapter would I need? Thank you!

    This
    http://en.wikipedia.org/wiki/Apple_Cinema_Display
    says the M8149 has the ACD connector (Apple Display Connector)
    The ACD looks like:
    http://en.wikipedia.org/wiki/Apple_Display_Connector

  • What is a good WebCam to work with the Mac mini operating system 10.8.2

    I have a new Mac Mini with an operating system 10.8.2 and I'm trying to find a WebCam that would be compatible with this system have been looking at the c920 and the c 615   have heard all sorts of conflicting reports, if anyone has any ideas or experiences it would be greatly appreciated thank you.

    Using the c615 now.....no need to install the Logitech software......works perfectly with FaceTime.......plug it in and use it....

  • What processors work with the Mac mini?

    Hello everyone!
    I've got the previous gen mini, and unless it is too expensive, I'd like to get a 7200 rpm HDD and a new processor. I can't seem to find what socket the mini uses or what processors will work.
    Any insight is appreciated!
    On a completely unrelated note, how do I clean out the trackball on my Mighty Mouse?

    You're looking for an Intel Core 2 Duo "Merom" in the T7000 series which is a Socket P. If I am not mistake, the highest chip you can find that works is the T7700. It's pricey: $300+.
    Upgrade processor information:
    http://www.xlr8yourmac.com/systems/macmini_core_2_duoswaps.html#storytop
    Clean your Mouse:
    http://support.apple.com/kb/HT1537

  • Will the 20" work with a Mac Mini?

    I've heard that the apple cinema monitors only work on PowerMac G4's and G5's. Is a Mac Mini a powermac g4. or will the monitor work with a mac mini?
    mike

    Yes, all the latest Cinema displays work with the mini except for the 30".

  • How do I get the camera on my Dell Monitor to work with my Mac Mini?

    ow do I get the camera on my Dell Monitor to work with my Mac Mini?

    If the camera registers itself as a standard UVC compliant Cameras (UVC = USB Video Class) then the Mac will recognise and use it with nothing else needed as the Mac has a built-in UVC driver. If it does not act as a UVC type device then you could look at the following third-party drivers.
    http://webcam-osx.sourceforge.net/
    http://www.ioxperts.com/dcam.html
    I have seen some reports suggesting that at least some Dell monitor models will act as UVC compatible webcams and should 'just work'.

  • What type of monitors can I use with the Mac Mini?

    Hello,
    I was thinking on purchasing a Mac Mini. I was not sure if the monitor I have at work with function with the Mac Mini. It is a: 20" ViewSonic Professional Series P815...
    Does anyone know if this monitor will work with any Mac Mini? Is there an adapter for it?
    Thanks.

    It would be fine for them all - all minis have come with DVI video connectors and adapters to convert that to VGA, so aside from the possibility that the Viewsonic might suffer the greyish or dull screen problem that affected a small(ish) proportion of displays with the first generation mini, it should connect up using the adapter just fine, and be correctly recognized by the system.

  • Will Most Windows Peripherals work with the MAC Pro?

    Im considering getting a MAC Pro... Unfortunately, I just invested on 2 PCI-E graphics cards (256 MB each)... will they work with the MAC Pro? Will apple sell me a MAC Pro with little options?

    Only PCIe cards with EFI type BIOS, so no. They will work in Windows just fine, just not in OS X.
    The stock configuration is fine and probably ideal anyway with the Nvidia 7300 GT, though most would recommend Radeon X1900 XT
    There is only one 16x lane slot.
    you might want to wait until Apple 'refreshes' the one year old Mac Pro line, either in the fall or wait until January MacWorld SF show. (eventually AMDs and Nvidia's latest offerings due later this year have a 99.999% chance of being adopted in some form).

  • What monitors are compatible with the Mac mini?

    What monitors are compatible with the Mac mini?

    Is this the new Mini?
    Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    512 MB*
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

  • What larger monitors work with the 15" vga G4 iMac

    What larger monitors work with the 15" vga G4 iMac?

    It is not so much how large but rather a question of resolution and how it would look on a larger monitor than the original.
    All iMac G4 15-inchers supported: 640x480; 800x600; and 1024x768 at a fixed 4:3 ratio--no provision for widescreen. The old rule of thumb for decent clarity for 4:3 ratio CRT monitors was:
    15-inch monitor supports 640x480
    17-inch supports 800-x600
    19 to 20 inch supports 1024x768
    I believe you would find the same issues with an older 4:3 flat-panel monitor.
    Also the iMacs can only mirror the resolution set on the built-in monitor so you can't have the external one set differently nor use it for extended desktop. If you set the built-in to 640x480 (would look nice at 15 inches) you are going to get 640x480 on the external regardless of how big it is. On a 19-20 incher, 640x480 could start to look pixelated.

Maybe you are looking for