Wrapping of Text in the Table UIElement

Hi
Is it possible to wrap the text in the header of a Table UIElement.Whenever a column heading is created it keeps extending on one single line. Any suggestions.
ravi

Please give a try with one of the following options..
A similar post is also available at
Newline in WDTextView
Option 1
1.Set the layout property of the UI element container to be GridLayout or MatrixLayout.
2.Enable the "wrapping" property of Label or TextView to "true"
3.Set the "width" property of the UI Element's(label/TV) Layout data to <integer>px [eg: 100px]
3.Build and Deploy
Option 2
This option is only applicable for Labels. But for any Layout.
1.Set the "width" property of the UI Element(label/TV) to <integer>px [eg: 100px]
2.Enable the "wrapping" property of Label or TextView to "true"
3.Build and Deploy
Thanks and Regards,
Sam Mathew

Similar Messages

The text in the tables is hazy when printed in the new version of pages. How can I get this to the same clear text as before?

In the new version of Pages, the text in the tables are no long clear and sharp as before, they look embedded on all print outs. How can I change this.

You can do a check for corrupted fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

Append hyphen automatically after the wrapping of text in the dimension field

Post Author: Nita_here
CA Forum: WebIntelligence Reporting
I want to Append hyphen automatically after the wrapping of text in the dimension field.
e.g the text reads "I want to wrap this text". then if cell width exceeds after "I want to wrap" then it should be displayed like this "I want to wrap-" "this text".
Thanks in advance,
Nita

Post Author: Nita_here
CA Forum: WebIntelligence Reporting
Thanks for your input.
Let me tell you what I have understood. I will create a variable having the formula (which i have earlier written) in universe. Whenever i need to use the formula in infoview, I will call the variable instead. That's fine. But again, I will have the same problem. If I do any change in infoview level, the cell width is bound to change as it is not the free standing cell, its a column among othe one. e.g.
A B C
1 2 3
4 5 6
(you can think B as the column). Any change(addition, deletion of columns) will certainly change the cell width of B. So, again I need to calculate the things, which i dont want.
Nita_here: I manually calculated that after 12 characters, the cell wraps the text.
I wonder if there would be a way to do the things dynamically.
Thanks in advance,
Nita

It is possible to put an icon&text on the table�s header of JTabbedPane?

Hi
It is possible to put an icon&text on the table�s header of JTabbedPane?
Tx
D

its not what i'm looking for.
maybe its a JTabbedPane at all. if yuo know the Emule interface,it seems like all the comnents Connect,Servers,Transffers,etc they all like a combination of a jTogglebuttn and a JTabbedpane.
can it be a JToolBar and JToggle buttons in it,that has an event that changh the content of the JFrame?
Tx
D

How to search text in the table?

Suppose, I've selected some fragment in my document, and I need to find and replace some text in it. Everything is ok, untill I select a part of a table with this text. Does anyone has idea, how to search through the selected cells in the table? Or, just how to iterate them?
Thanks!

var doc = app.ActiveDoc;
var tbl = doc.SelectedTbl;
// Navigate to the first selected row.
var row = tbl.FirstRowInTbl;
while (row.ObjectValid() === 1) {
 if (row.id === tbl.TopRowSelection.id) {
 break;
 row = row.NextRowInTbl;
// Process the selected rows.
while (row.ObjectValid() ===1) {
 cell = row.FirstCellInRow;
 while (cell.ObjectValid() === 1) {
 if ((cell.CellColNum >= tbl.LeftColNum) && (cell.CellColNum <= tbl.RightColNum)) {
 // Do something here...
 cell = cell.NextCellInRow;
 if (row.id === tbl.BottomRowSelection.id) {
 break;
 row = row.NextRowInTbl;
This should do what you want.
Rick

Vertically-aligned tables shift down when entering/editing text within the table.

Hi all,
We have a sudden problem that is occurring, and I've done a lot of searching without finding anything close to this happening elsewhere.
If there is ever a table that is aligned vertically within a text frame, you cannot edit the text without having it shift down one line break for every letter you type, until it's bottom-aligned within the frame. You can then click "align center", and it will re-align itself. Then, if/when you need to change even one letter again inside the table, it will shift down one line.
We've tested it with two different docs on both Mac and PC, with the same problem. I've cleared my prefs on the Mac to see if that would make a difference, and it hasn't done anything.
Any thoughts here? I can't recall anything that would have changed since this started happening, but it won't leave us alone now!
Thanks!!

Very interesting. I do lots of tables but don't vertically justify so I have never run into this. However I can confirm this behavior on a new clean test page I made, using InDesign CS5 (7.0.3) on Mac OS 10.6.6. I have no other problems with InDesign; it is running flawlessly. And no weird plug-ins or system hack software.
My test file uses my default font (Adobe Minion Pro) and the default table (Insert > Table).
It also shifts down when I delete a character in a cell. And the shift for me is more than one carriage return. I can get it back to center-aligned by top aligning and then choosing center align again.

ADOBE: How to print a table only on uneven pages and a text on the back?

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but the table should only appear on Odd pages. The even pages should be skipped. On the even (back) pages we need to print "Terms and Conditions". Is that possible? Can it be done without scripting?
We are using ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
One page was created for the table, totals etc.:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage", so there is always one page with the text. And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
What should happen is that on the front pages the item table is printed. If there are too many lines then it should continue on page number 3 then 5 etc. All the even pages should display text only.
What actually happens is that the item table also gets printed in the content area for the Condition text...
The best I could achieve is to decrease the contenta area of the back page. To force pagination. But still it prints one table record in the (very small) content area of the back page before paginating to the next page (front page again). If it only would not do that, it would be fine.
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

How to get only partial text of a paragraph into the table of content?

Hi guys,
currently I'm working on a manuscript based on the publication manual of the American Psychological Association.
Unfortunately, there is some sort of heading that's placed right in front of further text. Here an example:
+This is my heading.+ Now ordinary text formatted differently should follow.
Does anyone here know, how to get the text of the heading (but not the following text) into the table of content? For as far as I know I can't format the heading as a different paragraph than the following text.
By the way, I use pages'08.
Thanks for your help

Hi Dennis,
thanks for your suggestion, unfortunately I already tried that and it didn't work. I have created several unique styles. Problem is, I need two diferent styles in *one paragraph* - one style for the "heading", which is consistent to the APA manual not an own paragraph (sorry, not my idea...), and another style for the following text. As my example above shows, the heading is followed by usual text and I may not press return after the heading and switch to a new paragraph..
It has to look exactly like this:
+heading in italics.+ Now heading is followed by usual text without changing the paragraph or starting a new line. Blurb blurb blurb whatsoever blurb blurb. The text goes on an on and an on you see.
I can't format the heading differently than the text (because if I try, the whole paragraph is formatted this way) and so I can't add just the heading to the TOC. Do you see what my problem is? Got any other suggestion?

Issue in wrapping of text in TextEdit control

Hi,
I'm developing an occasionally connected application using NetWeaver Mobile 7.1. In one of the view, I use TextEdit control to display the address information where the address is a multiline text data. During testing of the application in the simulator, the wrapping of text in the TextEdit control is not working properly. The wrapping property of TextEdit control is set to "soft" but the text is not getting wrapped. Even I tried the other option "hard" wrapping but it throws some error while building of the application.
Please suggest a solution to do wrapping of text using TextEdit control.
Thanks in advance.
Regards,
DVR.

Hi Nipun,
The rows and cols properties are already set and also the data is multiline but the text is not wrapping.
Say the properties of a TextEdit control rows is "4" and cols is "30" was set. The data is also a multiline text say each line has more than 30 characters. During wrapping of text with in TextEdit control the first row should have only 30 characters and rest should be wrapped off to the next row and so on.
But during execution what happens is the text is not getting wrapped instead the first row itself has all the characters of first line of the text and second row has next line of text and so on. The text in a row can be scrolled through using horizontal scrollbar.
My need is the horizontal scroll bar should not come and the text need to the wrapped off with number of cols specified.
Regards,
DVR

How to add the Row count(number of rows in table) in the table header?

Hi,
I'm having a table. This table is viewed when i click on a search button.
On the table header it should dynamically display the number of rows in the table, i.e., the row count.
How to do this? could any one explain me with the detailed procedure to achieve this.
Thanks & Regards,
Suresh

If you want to show a localized text in the table header, you should use the Message Pool to create a (parameterized) message "tableHeaderText" like "There are table entries".
Next, create a context attribute "tableHeaderText" of type "string" and bind the "text" property of the table header Caption UI element to this attribute.
Whenever the table data has changed (e.g. at the end of the supply function for the table's data source node), update the header text:
int numRows = wdContext.node<TableDataSourceNode>().size();
String text = wdComponentAPI.getTextAccessor().getText
IMessage<ComponentName>.TABLE_HEADER_TEXT,
new Object[] { String.valueOf(numRows) }
wdContext.currentContextElement().setTableHeaderText(text);
Maybe you want to provide a separate message for the case that there are no entries.
Alternatively, you can make the attribute calculated and return the header text in the attribute getter.
Armin

How to delete the record in the table without using lead selection?

hi,
I have added the separate column "delete" to the table uielement and so for each record or row of the table the appropriate "delete" link to action will be there................the code below works when the particular row is selected through lead selection only.......
help me how to delete without using lead selection.....
DATA:
NODE_MODULE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE TYPE IF_V_MODULE=>ELEMENT_MODULE .
 data itab TYPE TABLE OF zac_modules.
navigate from <CONTEXT> to <MODULE> via lead selection
NODE_MODULE = WD_CONTEXT->GET_CHILD_NODE( NAME = `MODULE` ).
get element via lead selection
ELEM_MODULE = NODE_MODULE->GET_ELEMENT( ).
get all declared attributes
ELEM_MODULE->GET_STATIC_ATTRIBUTES(
 IMPORTING
 STATIC_ATTRIBUTES = STRU_MODULE ).
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
 IMPORTING
 TABLE = itab )
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id.
CALL METHOD NODE_MODULE->BIND_TABLE
 EXPORTING
 NEW_ITEMS = itab
 SET_INITIAL_ELEMENTS = ABAP_TRUE
 INDEX =
ENDMETHOD.

Hi ,
The onclick event provides you with a standard paramater "CONTEXT_ELEMENT" which has the element from which the event is triggered.
so you can declare this in the handler(if it is not there) and use it as follows.
CONTEXT_ELEMENT TYPE REF TO IF_WD_CONTEXT_ELEMENT an importing paramater.
DATA:
NODE_MODULE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE TYPE IF_V_MODULE=>ELEMENT_MODULE .
data itab TYPE TABLE OF zac_modules.
CONTEXT_ELEMENT->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_MODULE ). "Using the context_element paramater to get the static attributes.
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
IMPORTING
TABLE = itab ) "getting all the data.
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id. "deleting the particular row from the table and binding it.
CALL METHOD NODE_MODULE->BIND_TABLE
EXPORTING
NEW_ITEMS = itab
* SET_INITIAL_ELEMENTS = ABAP_TRUE
* INDEX =
thanks,
Aditya.

Can no longer edit text in my table on pages

I just finished a mammoth report in Pages for which I used a table format for all the verbiage. I am now going back to edit some of the text in the table but when you click on the cell where the existing text is, it goes "white", and you can't edit what's there (because it's now invisible) and you can't add anything else. You click away elsewhere on the page and the previous text fortunately comes back, but it is still unedited :-( Help! Thanks

Doing an entire report in a table is such a bad idea and really unnecessary.
Sounds like you need to update both Pages and your user tag.
Are you actually on OSX 10.6.8 and what version of Pages are you using?
Menu > Pages > About Pages
Peter

[CS3 JS] Replacing/Adding text in a table

Hello professionals....
I am currently wanting to replace text within a table.
The Table has 4 simple colums. All text in the table has the same character style.
b The situation is
i Here is a short 'cut-out' of the scripting I have done:
I read in the text bthat needs to be modified from the table with this script:
> app.findTextPreferences.appliedCharacterStyle = myRevIndexListCharStyleName;
f = myDoc.findText();
var myCurrentResponsiblePerson = f[2].contents;
var myCurrentComments = f[3].contents;
New text is set to another variable:
> var myResponsiblePersonField = textEditboxes.add({editContents:myCurrentResponsiblePerson, minWidth:myTextBoxWidth});
var myCommentField = textEditboxes.add({editContents:myCurrentComments, minWidth:myTextBoxWidth});
var myCourseRevIndexPerson = myResponsiblePersonField.editContents;
var myCourseRevIndexComment = myCommentField.editContents;
I then proceeded to to make a new 'replacement' string:
> var myCourseRevIndexList = myRevIndex+"\t"+myCourseRevIndexDate+"\t"+myCourseRevIndexPerson+"\t"+myCourseRevIndexCom ment;
return[myCourseRevIndexList]
Then I try to 'Change' the text by this:
> app.findTextPreferences.appliedCharacterStyle = myRevIndexListCharStyleName;
app.changeTextPreferences.changeTo = oneResult[0];
oneDoc.changeText();
Result - InDesign Crashes...!
What am I doing wrong?
I know it has something to do with the:
> app.findTextPreferences.appliedCharacterStyle = myRevIndexListCharStyleName;
app.changeTextPreferences.changeTo = oneResult[0];
Because when I deactivate this part - InDesign does
b not
crash!
Would it be better to
i somehow
replace the individual text 'cells'?
If so - how do I do that?
I have treid to read up, but have had no luck!
Help / insights would be greatly welcomed.
Thanks in advance.
Lee

Hello,
:) Sorry - I should have explained a little more!
btw - the linked 'pdf' file is blocked for me! Our IT department are very fussy!!! :(
b What is your main idea?
We have a 3 sided document (Title page, Content page, Release page) to present our product - Training Courses.
On each side of the document there are certain informations that are the same. To make life easy for the people editing these documents, it was decided to make a script to automate the input and changing of these informations.
Character Sytles were generated to define each field of information, so to aid in the find/Change of the scripting.
On the Title page there is the 'Course Title', 'Course Reference No.' and 'Document No.' information.
On the Content page there is the 'Course Title', 'Course Sub-Title', 'Reference No.' and 'Document No.' informations (naturally there is all the course info too, but that's a 'one-time-entry' only).
On the Release page there is all the above and a
b table
that contains the latest revision index information. i.e. Revsion Index, Date of Changes, Responsible Person, Comments to changes made.
This row of information has a Character Style and is read in.
I then searched the string and replaced each Array position with the previously entered text.
It seems to work OK for when you are creating the
b first document
My problem what I see coming is the fact that when it is needed to enter a revision - how would I
b add
another row
b and
then select only the last row of - then to be 'blank' information?
Did this help?
If it might help - here is the InDesign 'template' file that they start with:
http://www.freetimecorner.ch/joomla2/images/allsorts/course_description_end.txt
b NOTE
Change the 'txt' for 'indt'
In the script you'll have to change the address when he goes to open this file (
i in the top few lines

Style sheet changing when applied to text within a table

Hi everyone,
I'm using ID CS2.
I've defined a paragraph style sheet with the regular weight of a certain typeface, however when I apply this style to text within a table, the typeface changes to the bold version of the font even though the regular version is specified in the style.
Does anyone know if this is a known issue with styles being applied to tables or is it a sign of a corrupt file or something? Is there a fix?
Thanks

Is there a character style applied to the table or text in the table. I had many issues with this over-riding my paragraph style.

How to change heder text font of table

Hi
i want to change font and color of header text of the table can you please tell how to do it.
Thanks
Rahul

Hi Rahul,
There is no such option available.
But you can use images as a workaround.
create the image of your header texts and use them as a Header.
it will surely help you.
regards
Narendra Singh

Wrapping of Text in the Table UIElement

Similar Messages

Maybe you are looking for