Write file error 8

Once the file is created subsequent writes show Error code 8 out of the "Write File" VI LV6. (Cannot upgrade the code at this time). I'm using open/create/Replace File VI along with the Write File VI. Creating the file run OK, once I go back and rerun for a write the "Write File" reports Error code 8. How do I fix this issue.... using LV6.

The file created by the open/create/Replace VI attributes are NOT set to READ ONLY. See the pic below. If the LV creates the file it should be able to subsequently write to the same file. Once again this is LV version 6. It didn't work this way before... I took a look at a few things in the code and noticed this anomaly.
BTW, there are root or branch level folder showing the Read Only attribute is inherited from parent folder... but my whole C drive is this way... but LV should be able to write to the file regardless....
Message Edited by richjoh on 12-22-2009 03:53 PM

Similar Messages

  • Load blob to file. error: file write error

    Hi,
    I used procedure witch load blob to file. It's working at Oracle 10g, but its does't work on oracle 11g. Why?
    create or replace PROCEDURE load_blob_to_bfile (p_file_id IN VARCHAR2, p_directory IN VARCHAR2, p_ident in varchar2 default NULL)
    IS
    v_blob BLOB;
    v_start NUMBER := 1;
    v_bytelen NUMBER := 2000;
    v_len NUMBER;
    v_raw RAW (2000);
    v_x NUMBER;
    v_output UTL_FILE.file_type;
    v_file_name VARCHAR2 (200);
    BEGIN
    -- get length of blob
    SELECT DBMS_LOB.getlength (blob_content), filename
    INTO v_len, v_file_name
    FROM wwv_flow_files
    WHERE filename = p_file_id;
    -- define output directory
    v_output := UTL_FILE.fopen (p_directory, p_ident||'_'||v_file_name, 'wb', 32760);
    -- save blob length
    v_x := v_len;
    -- select blob into variable
    SELECT blob_content
    INTO v_blob
    FROM wwv_flow_files
    WHERE filename = p_file_id;
    v_start := 1;
    WHILE v_start < v_len AND v_bytelen > 0
    LOOP
    DBMS_LOB.READ (v_blob, v_bytelen, v_start, v_raw);
    UTL_FILE.put_raw (v_output, v_raw);
    UTL_FILE.fflush (v_output);
    /* Text only could be: UTL_RAW.cast_to_varchar2 (v_raw);*/
    -- set the start position for the next cut
    v_start := v_start + v_bytelen;
    -- set the end position if less than 32000 bytes
    v_x := v_x - v_bytelen;
    IF v_x < 2000
    THEN
    v_bytelen := v_x;
    END IF;
    END LOOP;
    UTL_FILE.fclose (v_output);
    END;
    directories is creaited and granted for read and write. It looks like file is created, but application rise the write file error, and files in directory is emty.
    TomasB

    So, I'm copying the file in a temp. BLOB with this function:
    FUNCTION get_remote_binary_data (p_conn IN OUT NOCOPY UTL_TCP.connection,
    p_file IN VARCHAR2)
    RETURN BLOB IS
    l_conn UTL_TCP.connection;
    l_amount PLS_INTEGER;
    l_buffer RAW(32767);
    l_data BLOB;
    BEGIN
    DBMS_LOB.createtemporary (lob_loc => l_data,
    CACHE => TRUE,
    dur => DBMS_LOB.CALL);
    l_conn := get_passive(p_conn); //get a passive connection
    send_command(p_conn, 'RETR ' || p_file, TRUE); //send Retrieve command to server
    BEGIN
    LOOP
    l_amount := UTL_TCP.read_raw (l_conn, l_buffer, 32767);
    DBMS_LOB.writeappend(l_data, l_amount, l_buffer);
    END LOOP;
    EXCEPTION
    WHEN UTL_TCP.END_OF_INPUT THEN
    NULL;
    WHEN OTHERS THEN
    NULL;
    END;
    UTL_TCP.close_connection(l_conn);
    get_reply(p_conn);
    RETURN l_data;
    END;
    Then I'm writing it into a local file:
    PROCEDURE put_local_binary_data (p_data IN BLOB,
    p_dir IN VARCHAR2,
    p_file IN VARCHAR2) IS
    l_out_file UTL_FILE.FILE_TYPE;
    l_buffer RAW(32767);
    l_amount BINARY_INTEGER;
    l_pos INTEGER := 1;
    l_blob_len INTEGER;
    BEGIN
    l_blob_len := DBMS_LOB.getlength(p_data);
    l_amount := DBMS_LOB.GETCHUNKSIZE(p_data);
    IF (l_amount >= 32767) THEN
    l_amount := 32767;
    END IF;
    l_out_file := UTL_FILE.FOPEN(p_dir, p_file, 'w', 32767);
    WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ (p_data, l_amount, l_pos, l_buffer);
    UTL_FILE.put_raw(l_out_file, l_buffer, FALSE);     
    l_pos := l_pos + l_amount;
    END LOOP;
    UTL_FILE.FCLOSE(l_out_file);
    EXCEPTION
    WHEN OTHERS THEN
    IF UTL_FILE.IS_OPEN(l_out_file) THEN
    UTL_FILE.FCLOSE(l_out_file);
    END IF;
    RAISE;
    END;
    I've checked the blob before I'we wrote it ito the file (UTL_FILE.put_raw(l_out_file, l_buffer, FALSE)), and it contains no carriage-return.

  • Corrupt file error while writting a file in compress mode

    Hello,
    I have a scenario where i am writting data in a file in appending mode with filter 'compress' addition using open dataset, on Al11 for the first set of records it works fine but if this file is accessed again for writting data in next select statement ( its between select endselect),the file is getting corrupted, if i try to open this file corrupt file error come. can someone help.
    Thanks and Regards,
    Gunjan

    Hi Gunjan,
    Unfortunately, you can't do in that way. The behaviour of that OPEN and FILTER 'compress' clause is to create a compacted file, to be read later, but it can be appended... all your writes go to a pipe and when you close the file this is sent to 'compress' program or other filter and than a compacted file is created.
    You can't go back and start inserting again after close it.
    Follow documentation:
    http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm
    The addition FILTER must not be used together with the addition AT POSITION or for the access type FOR UPDATE.
    Regards, Fernando Da Ró

  • Error while relocating (Can't write file (no space)) - Help please

    I have been having trouble relocating master files since upgrading to Leopard. The problem doesn't seem to affect only Aperture. I can happen when using Finder or another application to move files from one drive to another. Other types of files don't seem to be affected, just my library of image files.
    The copy operation runs for a while then hangs up. The application doing the copy reports an error that that's the end. Aperture gives this error message: Error while relocating (Can’t write file (no space)). The Finder reports plenty of available space on the destination drive!
    I remember seeing a thread--but can't find it now--about a problem with certain xmp metatdata embedded into files causing problems with file operations.
    Hoping for a solution!
    Message was edited by: thomas80205

    It's possible that you might have a corrupt file. Have you tried to copy different files on to the destination drive? If those files copy fine, then narrow down the offending file by copying less images at a time.

  • Error Log entry Unable to write file with XML Saver

    Hi all,
    I have just encountered the following problem. I am saving a XML file using the XML Saver. Another BLT reads the file, changes something, and saves it again with the same name.
    The file is saved, but the NetWeaver SAP Log gives the error
    "Unable to write file /usr/sap/<SID>/JC00/j2ee/cluster/server0/apps/sap.com/xappsxmiiear/servlet_jsp/XMII/root/CM/<folder>/file.xml"
    Is it a problem with the new storage mechanism in MII 12? Even if I delete the file first and then save it again with the same name, the error is displayed (though the file is saved).
    Michael

    Hi Mike,
    no, the Debug only says "Begin Action XML Saver" and "End Action XML Saver".
    The action however writes the file, the contents has changed after the BLT has run.
    Well, I have just tried the Text Saver with the same file (name and contents). It also gives the error. I now wanted to delete the folder. The folder disappered from the workbench view, and the Netweaver log says "Unable to process service message".
    I then clicked "publish" on the parent folder and tried to create the folder again, but although the folder was not displayed, the workbench said "the folder already exists". When I start my BLT, it could write the file into the folder which then reappeared in the workbench.
    Hm, maybe our installation has some problems? Feels like missing authorizations...
    Michael

  • FileAdapter Write file with empty payload always error

    Hi All ,
    I run on 10.1.3.3.1 with patch Patch 7375080 only esb not have bpel.I have to use webservice for verify data.
    and response with set of objects.
    I have 2 important questions about write file with FileAdapter.
    1. I want to not create file if not have error from validate data but
    with this xsl tranform if I uncomment when value of condition is 'N' that will error cause single line payload.
    <xsl:for-each select="/tns:populateYFRIResponseElement/tns:result/tns:wrongLines">
    <!--<xsl:choose>
    <xsl:when test="../tns:isHaveWrongLines = 'Y'">-->
    <imp1:Child-Element>
    <imp1:FrameNo>
    <xsl:value-of select="concat('&quot;',tns:frameNo,'&quot;')"/>
    </imp1:FrameNo>
    <imp1:EngineNo>
    <xsl:value-of select="concat('&quot;',tns:engineNo,'&quot;')"/>
    </imp1:EngineNo>
    </imp1:Child-Element>
    <!-- </xsl:when>
    </xsl:choose>-->
    </xsl:for-each>
    but if I comment if condition 'Y' FileAdapter create csv files with empty like "","" .
    2.
    I must write log file with FileAdapter . I want to append file so I add attribute Append=true
    to wsdl
    <jca:operation
    LogicalDirectory="outgoingfile"
    InteractionSpec="oracle.tip.adapter.file.outbound.FileInteractionSpec"
    FileNamingConvention="YFRI%yyMMdd%.log"
    NumberMessages="1"
    Append = "true"
    >
    but when run that throws errors cause properties append not found.
    I view class FileInteractionSpec that have append properties .I very confuse.
    Any help would be appreciated.
    Regards,
    Weerawat

    Hi
    Thank for good answer.I am newbies in esb so I don't know that have routing expression before.
    I'm so glad your answer very helpful before routing but same question 1 if I have detail must not write data like below
    ,import file name YFRI20090616165654.DAT at Tue Jun 16 16:59:26 GMT+07:00 2009 with number of data is 2 correct line is 2
    "D",0,0,
    ,import file name YFRI20090616170202.DAT at Tue Jun 16 17:04:40 GMT+07:00 2009 with number of data is 12 correct line is 12
    "D",0,0,
    YFRI.txt,import file name YFRI.txt at Tue Jun 16 19:53:48 GMT+07:00 2009 with number of data is 2 error line is 2
    "D",1,3,MTOCCode:ZE8839LZ SAA is not have in DB
    "D",2,3,MTOCCode:ZE8839LZ SAA is not have in DB
    with
    <xsd:element name="LogFile">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="FileName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="Desc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="Detail" nxsd:startsWith="&quot;D&quot;," maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence nxsd:style="array" nxsd:arrayTerminatedBy="${eol}">
    <xsd:element name="line" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;"/>
    <xsd:element name="column" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;"/>
    <xsd:element name="desc" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;"/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    ESB will display error payload If import not have verify error detail so I have to write 'D',0,0 (Detail,Line,Column).
    In this situation how am I to do ?
    In question 2 .Now I can append with
    <jca:operation
    LogicalDirectory="outgoingfile"
    InteractionSpec="oracle.tip.adapter.file.outbound.FileInteractionSpec"
    FileNamingConvention="YFRI%yyMMdd%.log"
    NumberMessages="1"
    OpaqueSchema="false"
    Append="true"
    >
    </jca:operation>
    Thank you
    Weerawat

  • Re: Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

    hi. my error message is very close to this except it says 10,243,7 cannot read file instead of write file. i tried all the fixes listed here in this forum as well as just about everything else everyone else on here has listed on the net and even called canon and tried all their fixes as well to no avail. any ideas?
    [open window, place pc at edge gently tip and OOPS! crash! ]
    is anyone else getting this error message and if so; how'd you get around it?
    fixes tried:
    uninstalling
    reinstalling
    [several times]
    deleting all folders canon
    ccleaner-both the sweep and registry options with backups of course.
    sfc /scannow
    chkdsk
    thanks,
    pf

    Hi, pf!
    So that the Community can help you better, we will need to know exactly which operating system is running on your computer. That, and any other details you'd like to give will help the Community better understand your issue!
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

    I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32).  Can anyone please help me solve this problem? Thank you.  

    Hello. Please try the following adjustment to see if we can resolve this issue: 1.  Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2.  Click Settings.3.  On the left, choose the Auto Scan tab.4.  Click the Defaults button on the lower right.5.  Continue this process with each tab on the left.6.  Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

  • Ebook error message: "Fail to write destination file error"

    I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
    I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

    I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full.  I had no idea this was even possible!  But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook.  Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties.  This should show you a pie chart of used/free space on your Nook.  If this is the case, you need to remove some files from your Nook.  For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books.  If it's booked you've purchased, perhaps you need to archive some books.  Hope this helps!

  • Capture error message and write the error message to file

    Anyone know that how to caputre the error message which is generated in a scope catch? and then write the error message to file?
    Thanks a lot!!

    Hi,
    Please try the following:
    1. Double click on the newly created catch activity (denoted by an ‘!’ symbol
    on it)
    2. In the General Tab, Click on the ‘Browse Faults’ icon (denoted by a torch
    symbol)
    3. A fault chooser window opens, (Eg. Expand partner links->CreditRatingService
    -> CreditRatingService -> FaultNegativeCredit)
    4. Create a variable (Eg. Fault1_NegativeCredit) in the Fault chooser window to store this value.
    5. Create a partner link, configured as a file adapter. (Specify your output file in this file adapter wizard)
    6. Invoke this partner link and pass the 'Fault1_NegativeCredit' variable to that partner link
    I hope you are aware of the terms I used, the steps are just guide lines. practically, u need to do a few more steps. Please refer the BPEL tutorials on exception handling and file adapters. that will help you...
    best regards
    Message was edited by:
    hem chand

  • 10.1 upgrade install error message: "error cannot write file"

    I have just installed a clean copy of os 9.2 onto my powerbook g4. When I try to upgrade with the included cd mac os x 10.1 it errors out about half way through the install. I get the error message : "installition could not continue due to errors" " error cannot write file". I am mainly a pc guy, but want to be fluent with macs to. Has anyone seen this error before and/or know a resolution? Thanks. All help is greatly appreciated!

    Hi Again atadams77!
    Tiger is available for purchase at The Apple Store (U.S.).
    Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
    If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Panther is only on CDs, not DVDs.
    Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade on them.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    As has been posted, your Mac meets the Tiger System Requirements.
    If you install that, use the PPC 10.4.9 Combo Update, to upgrade to the current version.
    Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
    AppleRescue, sells a Tiger installation set on CD
    Shop Carefully, Examine All Documentation, And Good Luck!
    ali b

  • Weird error: "Cannot write file summary in a read-only environment"

    Disclaimer: We are using an old version of bdb - 3.2.76 but are not able to easily upgrade.
    We see this occasionally in production. From looking at the code it looks like critical eviction is happening since more memory is used then the limit we set then eviction is happening but then failing since the env is read only. I'm just wondering how it got to this point. we set the max size (je.maxMemory) to 1572864 bytes.
    This is not urgent but is adding noise to logs so any suggestions would be welcome...
    <application specific exception>
    …causedBy com.sleepycat.je.DatabaseException: (JE 3.2.76) Cannot write file summary in a read-only environment
    at com.sleepycat.je.cleaner.UtilizationProfile.putFileSummary(UtilizationProfile.java:720)
    at com.sleepycat.je.cleaner.UtilizationProfile.flushFileSummary(UtilizationProfile.java:708)
    at com.sleepycat.je.cleaner.UtilizationTracker.evictMemory(UtilizationTracker.java:120)
    at com.sleepycat.je.evictor.Evictor.evictBatch(Evictor.java:314)
    at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:253)
    at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:279)
    at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:690)
    at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:660)
    at com.sleepycat.je.Cursor.endRead(Cursor.java:1820)
    at com.sleepycat.je.Cursor.retrieveNextAllowPhantoms(Cursor.java:1616)
    at com.sleepycat.je.Cursor.retrieveNext(Cursor.java:1397)
    at com.sleepycat.je.Cursor.getNext(Cursor.java:456)
    ...

    Hi Nick,
    It is strange to me also that this is happening in a read-only env. Looking at the code, we don't prevent this sort of eviction in the 3.2 release or later releases. Yet we've never seen this problem before.
    This sort of eviction only happens when writing is occurring. Of course, in a read-only env there is no writing. The only way I can think of for this to occur in a read-only env is when there is a very large recovery interval -- the amount of log between the last checkpoint start and the end of the log. This can occur if you didn't close the env cleaning when you last wrote to it, or if the last checkpoint just happened to be very large.
    So one thing you could try is to ensure that you have a small checkpoint when you write to the log, before opening it in read-only mode. To do this, just before you call Environment.close, call Environment.checkpoint(new CheckpointConfig().setForce(true)). This will do one checkpoint before closing the env, and then another during the close. The last checkpoint should be small.
    If you can't do this, or it isn't sufficient, you could increase the je.cleaner.detailMaxMemoryPercentage env config property. This is the max amount of memory (% of total cache) used for the information that is being evicted. Since nothing can really be evicted in read-only mode, there is no harm in setting this to a much higher value than the default (2). I would try 10. This doesn't reserve or waste any memory, it just prevents this sort of eviction from occurring until a larger part of the cache is used. This is probably the simplest solution.
    A third approach is to simply accept that this sort of eviction will be attempted, but try to prevent the exception. If you're willing to rebuild JE (and you're not a supported Oracle customer -- please contact us if you are), then you could simply replace the 'throws' statement with a 'return null' in src/com/sleepycat/je/cleaner/UtilizationProfile.java:
        private synchronized PackedOffsets putFileSummary(TrackedFileSummary tfs)
            throws DatabaseException {
            if (env.isReadOnly()) {
                throw new DatabaseException
                    ("Cannot write file summary in a read-only environment");
            }--mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • " Can not interpret the data in file " error while uploading the data in DB

    Dear All ,
    After running the below report I am getting the " Can not interpret the data in file " error.
    Need to upload the data in DB through excel or .txt file.
    Kindly advise to resolve the issue.
    REPORT  ZTEST_4.
    data : it like ZPRINT_LOC occurs 0 with header line,
    FILETABLE type table of FILE_TABLE,
    wa_filetable like line of filetable,
    wa_filename type string,
    rc type i.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    CHANGING
    FILE_TABLE = filetable
    RC = rc.
    IF SY-SUBRC = 0.
    read table filetable into wa_filetable index 1.
    move wa_filetable-FILENAME to wa_filename.
    Else.
    Write: / 'HI'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    start-of-selection.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    FILENAME = wa_filename
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = 'X'
    TABLES
    DATA_TAB = it.
    IF SY-SUBRC = 0.
    Write: / 'HI'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    insert ZPRINT_LOC from table it.
    if sy-subrc = 0.
    commit work.
    else.
    rollback work.
    endif.
    Regards
    Machindra Patade
    Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

    Dear dedeepya reddy,
    Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
    REPORT  ZTEST_3.
             internal table declaration
    DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
          wa LIKE LINE OF itab,
          wa1 like line of itab.
                       variable  declaration
    DATA: v_excel_string(2000) TYPE c,
           v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv',  " name of the file
            delimiter TYPE c VALUE ' '.         " delimiter with default value space
         read the file from the application server
      OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc NE 0.
    write:/ 'error opening file'.
      ELSE.
        WHILE ( sy-subrc EQ 0 ).
          READ DATASET v_file INTO wa.
          IF NOT wa IS INITIAL.
            append wa TO itab.
          ENDIF.
          CLEAR wa.
        ENDWHILE.
      ENDIF.
    CLOSE DATASET v_file.
    EXEC SQL.
         TRUNCATE TABLE "ZPRINT_LOC"
    ENDEXEC.
    *------display the data from the internal table
    LOOP AT itab into wa1.
    WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
    ENDLOOP.
    insert ZPRINT_LOC from table itab.

  • Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

    We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
    The app is being deployed on many different servers. We sometimes got the error below when generating report:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
    Problem is, this seems to be  a pretty generic exception. It could be caused by many different reasons.
    e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
    Each time we could only guess what's wrong.
    We are running into it again, and this time everything seems correctly configured so far.
    We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

    Prithviraj Shekhawat wrote:
    Hi Henry,
    I believe you are using RAS SDKs to export the reports to PDF.
    Apply trace on RAS server and check what you find in RAS logs.
    Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
    Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
    Thanks,
    Prithvi
    >>I believe you are using RAS SDKs to export the reports to PDF.
    Yes
    >>Apply trace on RAS server and check what you find in RAS logs.
    >>Check whether you can see timeout error is RAS logs.
    How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
    >>Also, does the account that runs RAS have permissions to create
    >>a file in RAS's default temp directory?
    Pretty sure yes.
    >> Are you getting any out of memory or out of disk space exceptions
    >>on App server or RAS, tracing RAS server is the way to move forward.
    Not on App server.
    For RAS, that's the problem, I am not sure where to look.......

  • Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

    Hello,
    While exporting Export reporting from BI4 getting exception
    Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
    In Trace Log I am getting
    com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
      at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
      at java.util.ResourceBundle.getString(ResourceBundle.java:334)
    I tried following solution according to the all forums but still issue exist.
    Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
              <JVMMaxHeap>64000000</JVMMaxHeap>          <JVMMinHeap>32000000</JVMMinHeap>
    Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
    Check for temporary read write permission on server
    Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
    Can you please let me know is there anything missing.

    Hi,
    We face the same problem with some BI4 reports.
    The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
    This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
    Hope it can help.
    Ludovic.

Maybe you are looking for