Write phone number in the keypad while on call

Hi,
Suppose I call to my friend to get a phone number from him.
I am on my call and I do not want to save that number in my contacts, but I want to write it in my keypad, then to hang up the call and then to press call button to call that number I got from him.
It is not possible. The number that I have written is deleted while I hang up the call with my friend.
Is there any way to do it without saving that number to the contact list or calling that number while I am still speeking with my friend ?
Thanks a lot

Use the Notes app

Similar Messages

How to write a number on the keypad, when the service is shown?

Hi!
I develop idle service for 7941, everything works fine. But I have problem, users are accustomed to first dial the number on the keypad, then press the call. When the page is displayed on the screen, dial impossible. The keyboard is blocked. Can I hide a page of service, when the set of numbers?
Thanks.

Hmm.. there is something undocumented that you could try out.. if you look at the latest schema (for the 7.0 ip phone services developer guide) you there's an element called KeyItem which you can have for pretty much any CiscoIpPhone object (basically those that also can have SoftKeys).. the type is CiscoIPPhoneKeyType, you can have 0 - 32 such items, and there's an attribute that seems to indicate where the keys go.. keypadTarget can go to application (default), applicationCall or activeCall.. perhaps one of the latter two allows keys pressed to go to the telephony context and not the app context.
CiscoIPPhoneKeyType has a key (can be any of the physical keys.. you'll find a listing of what the values are in the schema file), then an url, and an urldown url.
So, either you manage to simply define those keys with some url (perhaps it can be empty? to be tested..) and manage to have them routed to the telephony context with the attribute I mentioned, or you could simply define a KeyItem for each key you want to be active, define an url for each and make this a notify url.. that way your app gets a notification about the key pressed, and you can do with it what you want.. this requires some additional logic on your end as you need to gather digits and decide when to initiate the call, but it still sounds doable.
If you go down that route, please let us know your findings because as I said, those things are only in the schema and there's no documentation that outlines the use - thus it would be useful for the rest of us if you could tell us your findings.

Typing a number in the keypad during a call

Hi,
Sometimes while you are in a call it happens you need to type a new phone number (provided by the person in the other side of the line for instance). So, I tap the keypad and type the phone number. But, once I finish the current call, the keypad goes off, and the number I typed just disappears. Does anyone know how I can keep that number I typed in the keypad? Tx.

Why not just type it in a note instead, then you just click on it to call the number.
The keypad is for entering dtmf tones during a call and is different to the dialling keypad so the number disappears when a call is ended

Why is it SOOO hard to find Adobe's support phone number on the website?

why is it SOOO hard to find Adobe's support phone number on the website?

Thanks for your reply. May I ask what makes you say I haven't applied all those updates you listed? To the best of my knowledge, I haven't skipped any that I've been alerted to, it just took me a while on some occasions to succeed.
This latest one is the only one I've taken such an extra long time to get, and if I'm behind on some, I don't understand why I'm still being alerted to "update"...?
My newest problem however is that when I shut Firefox down, and then try to clean out cache etc, I keep getting a message that says:
"You must close Firefox/Mozilla to allow the Internet Cache to be
cleaned.Otherwise this process will be skipped."
But there are no -- visible anyway -- browser windows open.
Can you help me with that please? ...and many thanks in advance.

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

My apple id account is setup with my dads cell phone number, so on my iMessages on my mac i get my dads texts messages, is there anyway to change it so my phone number is the one receiving messages on my mac?

Remove his phone number from your AppleID.
http://appleid.apple.com

How can i remove the phone number from the text messages that i receive in the notification center

how can i remove the phone number from the text messages that i receive in the notification center?

You choose whether to see text messages in Notification Center or not. If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
You can choose not to see them at Settings > Notification Center > Messages.

How can i remove my phone number rom the imsg server

How can i remove my phone number from the imsg server

You can disassociate your phone number with your iMessages/Apple ID by turning off iMessages. Go to Settings -> iMessages -> Turn off iMessages. Wait a couple of hour to fully have your number unregistered with iMessages.

I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

Graham,
For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc. For the iphone you should use it's phone number, but an e-mail could be used for it too. If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
http://support.apple.com/kb/HE68

I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

I just got the new Iphone 5 and when I send a message in a group text it keeps sending it as an email and as my phone number. The people in the group text are complaining that it is creating a new group message everytime I text. How do I fix this?

Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

Use the web chat:
Contact Customer Care
Mylenium

How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

Is this your issue > http://support.apple.com/kb/HT5818
If so...
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.

How can I reset the phone number under Imessage (iphone 4s unlocked tmobile ios 5.0.1)? The phone number from the person i purchased it from is grayed out and cannot be edited. Please help!

I bought this phone from someone and then I unlocked it using that gevey sim i think -- using it for T-mobile..
I can't get Imessage to work on my phone number because the old number is there and it is grayed out and cannot be edited.
I can use it but not with my phone number, only with email.
Can someone please tell me how to fix this so that I can send with my number?
Thanks so much

The advisor should not have told you this for legal reasons. There is no way of tracking the iPhones just of finding out which SIM cards were used to activate them and if they were activated at all. Court can authorize Apple to release this information to the count. There is no legal way without involving a judge.

I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Save a phone number without the input mask

Hi,
I actually have 2 related issues that I hope you might be able to help me with.
I have a form linked to an interactive report, so when I click a record, the form is populated with the record's data. I just started using the new text field masked input plugin to handle phone number formatting, etc., which Patrick recommended.
The plugin works nicely when a phone number being displayed from the source is 10 characters. The input mask I'm using is (999) 999-9999. However, I also have phone numbers in records that don't include the area code. When I select one of those records, the phone number field is blank. I would like it to display 999-9999, and be right justified. Is there an easy fix for that?
My next problem occurs when I try to save the record. The process tries to save the phone number, including the mask, (14 characters), to the table. I only want to save the number to the table, excluding the mask. I'm sure there is a way to do this but I haven't found it yet.
Thanks in advance for any help,
Gary

This is my solution to parsing the number only from the masked phone number:
1) Create a field, 'P1_PHONE_MASKED', with a phone number mask: (?***) 999-9999
2) Create a hidden Database Column like: 'P1_PHONE' It will initially hold the value of the record's phone column.
3) create a javascript function in the page's before header section, between the space tags, to strip out all non-numeric values and update the hidden field:
function remmask(src,tar){
var mystring = $x(src).value;
mystring = mystring.replace(/\D/g,'');
$x(tar).value = mystring;
4) Place the function call in the from in the HTML Form Elements Attributes of P1_PHONE_MASKED: onBlur="javascript:remmask('P1_PHONE_MASKED','P1_PHONE');"
Now, anytime you change the value in P1_PHONE_MASKED, P1_PHONE gets updated with just the number values from P1_PHONE_MASKED.
You can also add validation to the function to ensure that the length of the phone number is either 7, no area code, or 10, including area code. Normally, the mask should handle validation, but as you can see, to make this work, I had to make the mask more flexible, to allow for alpha numeric values in the first 3 positions and to allow for either 7 or 10 characters. Unfortunately, that means a user could enter something like XXX12 and the mask won't reject it.
Partial solution to displaying ( ) 999-9999 in the masked input field P1_PHONE_MASKED when initially selecting a record for display.
1) Make the Source Type for P1_PHONE_MASKED "SQL Query"
2) Insert a query similar to the one below into "Source Value or Expression"
SELECT
CASE
WHEN length(METAREPO.CONTACTS.CONTACT_PHONE) = 10
THEN
METAREPO.CONTACTS.CONTACT_PHONE
WHEN length(METAREPO.CONTACTS.CONTACT_PHONE) = 7
THEN
'___'||METAREPO.CONTACTS_2011.CONTACT_PHONE
END
FROM METAREPO.CONTACTS
WHERE METAREPO.CONTACTS.CONTACT_ID = :P1_CONTACT_ID
This will display 7 digit phone nubers as follows: (___) 999-9999 in the masked field: P1_PHONE_MASKED.
I wanted to use spaces between the () to make it perfect, but I'm unable to get this to work. I've tried things like:
' '||METAREPO.CONTACTS_2011.CONTACT_PHONE
LPAD(METAREPO.CONTACTS_2011.CONTACT_PHONE,3,' ')
Both of which work in PL/SQL Developer, but not in Apex. I believe this is because HTML collapses spaces by default.
I would like very much to resolve this last issue. Any suggestions?
Regards,
Gary

How to stop iphone 4s from putting a space after the second digit, when entering a text number from the keypad

How do I stop the iphone 4s from putting a space after the second digit, when entering a text number from the keypad. Entering a text number on the key pad like 61998 comes out on the screen as 61 998 and the sms fails to go.

The space (or lack thereof) should have no effect on whether or not the SMS goes through. The spacing is intended to make it easier for the human eye to comprehend the number. I'd start by resetting the network settings in General>Reset>Reset Network Settings.

Write phone number in the keypad while on call

Similar Messages

Maybe you are looking for