Write to new spreadsheet each time condition is met.

Hi guys, I am currently in the final stage of the project thanks to those who helped me along the way, but i have one more "riddle" to solve...
I am currently writing all the data collected into the spreadsheet by using write to spreadsheet, but i would like to actually have a different spreadsheet file each time a certain condition is met, is it possible to do it?
Thanks in advance.
i have attached my VI below for a clearer view.
Attachments:
SERIAL AND TCP DATA RECEIVING FINAL.vi ‏257 KB

Hi Simmy,
you could use a counter and if the condition is true you can increase it.
Mike
Message Edited by MikeS81 on 05-27-2008 08:46 AM
Attachments:
Unbenannt1.PNG ‏10 KB

Similar Messages

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Write to spreadsheet without prompting each time through a loop

So my goal is to take measurements every 5 minutes (or whatever the time delay is, currently 15 seconds until it is ready to use) for several days. My biggest issue is that it asks me after each run where to save to. Is there an easy fix so that once a location is chosen I would be able to walk away and just let it keep running for days and it would keep appending data into that file after each delay?
My other thought was data logging. The issue I get with trying to log the data is having it be usable. When I choose a blank excel file to log into I get "The data in the VI's log file is incompatible with the VI's front panel." Why is this incompatibile if I have it going ot a spreadsheet that can be saved as a .xls? Any help or suggestions would be appreciated. I attached my program that I have set up. I understand you dont have the Keithley device so you can't run it, but any help would still be greatly appreciated.
Solved!
Go to Solution.
Attachments:
Keithley 6514 Meas Voltage Example.vi ‏44 KB

altenbach wrote:
Dan Stewart wrote:
Is there an easy fix so that once a location is chosen I would be able to walk away and just let it keep running for days and it would keep appending data into that file after each delay?
Connect the new path output back to the path input via a globally initialized feedback node.
What is considered the new path output? I tried attaching the right side of the feedback node to the data as well as the spreadsheet vi. Neither worked. I also tried keeping the left side blank as well as attaching it to the spreadsheet with the right side to the data. I am not familiar with the feedback node and the help section didn't do a ton for helping me. All of the various combinations I have tried connecting the data or write to spreadsheet have all resulted in prompting me for a file each time through the loop still. I attached the most basic thing I tried, but if you would like other combinations I have tried I can re wire and attach those as well.
Attachments:
Keithley 6514 Meas Voltage Example.vi ‏44 KB

JDev10G - Preventing OC4J Server opening a new browser window each time?

Hi,
Does anyone know how to prevent the embedded OC4J server in JDev 10g from opening a new web browser window each time I run my project i.e. I'd like the server to re-use the same IE window.
JDev 9i opened the launch page in the same IE window.
There's nothing obvious in the OC4J settings.
Could this be a client browser setting?
Not a big deal just thought I'd see if anyone has worked this out.
Thanks
David

David,
There is a browser setting for both IE and Firefox to indicate whether launching re-uses the same window/tab or opens a new one. Absolutely nothing to do with OC4J.
John

New page opens each time I click on a link instead of staying imbedded on the current page

Each time I click on a link or delve further into a sight, instead of staying within that sight Firefox opens an entirely new page. At the end of just a few minutes of browsing, the page indicator along the bottom of my screen has dozens of open pages. I can't hit the 'back' button to go back in a sight because Firefox has already opened a new page instead.
What is up with this and how do I get it to stop?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] If possible please also try to rule out hardware / mouse settings issues.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

New PDF created each time I open a link

Hi,
I have an app that lists a bunch of PDFs that are located on device. Each time I select a PDF, it is opened with Reader and a NEW revision of the PDF appears to be created.
So, if the original PDF was TEST.PDF, Adobe Reader creates TEST(1).PDF, TEST(2).PDF each time the PDF is opened from an external app.
This means that the original annotations exist in the first document and cannot be combined unless this is manully opened from within Reader.
The reverse is true for the way Adobe Reader operates on Android. The original file (TEST.PDF) is opened each time and so you are only ever working with a single version of the file.
Is there any solution to this?
Thanks, Donal

Hi,
We understand your concern. But this is how Apple OS supports viewing of documents across different apps. Whenever you open pdf file in Adobe Reader from Dropbox or any other app, a local copy will be saved in the Adobe Reader area. So making any changes in Adobe Reader will not reflected back to file present in dropbox or any other app. This is an OS limitation.
For a workaround what you can do is, update the pdf file in Adobe Reader and then mail it/ open it in any other app.
Thanks,
Ankit

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

My iPod is a nano from 2006 the computer that had my original iTunes ones long gone, is there away to load my iPod to a new iTunes. Each time I try it wants to erase my iPod? Help please

I havean iPod nano "2006" model,the computer that had my original iTunes is long gone is there away to load my songs a from my iPod on to a new itune account? Each time itryitwants to rewrite my nano? Help!

The "bar" at the bottom does not say anything about all of your songs being on the iPod. It just shows you how much of its storage capacity is being used, based on what is on the iPod.
If you see "On This iPod," that means the iTunes sidebar (along left side of window) is not visible. This is easier to describe with the sidebar visible, so from the iTunes menu bar, under View, select Show Sidebar.
Select the iPod in the sidebar, under DEVICES. There is a bar of buttons near the top, starting with Summary. Click on Music next to Summary. This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. You can choose to sync Entire music library, if (?) your iTunes music library fits on the iPod. With this setting, your entire iTunes music library syncs to the iPod, and new songs get synced automatically. A 7th gen iPod nano is 16GB, so your iTunes music library would have to be less than 16GB (not counting non-music content on the iPod). Otherwise, you can choose to sync Selected playlists, artists, albums, and genres. Then, select (checkmark) the playlists, artists, albums, and/or genres you want on the iPod from the lists below. If you want newly added songs to sync to the iPod, they must be part of your selection. For example, you can add them to a playlist that you have selected for syncing to the iPod.
When you click Apply, the songs from your selection sync to the iPod. Going forward, changes to your iTunes library (based on your settings on the iPod's Music screen) sync automatically to the iPod, the next time it is connected (or when you click Sync).

I had to restrore my IPad 1 after loading 5.0.1 as it crashed whilst trying to re-sync. Now I have re-synced 4 times. ITunes just creates a new backup version each time but won't move on. It keeps prompting me to restore from backup

This is the problem I have and what it looks like. Everytime I hit continue I restore from a back up, create a new back up (as time stamped) and then end up back at the same starting point

Having tried various things (backing up to a different Mac, restoring the iPad to its original settings - thus wiping all content from the iPad-, trying to restore from an older backup predating the problem etc), all to no avail, I took the plunge and chose "Set Up as a new iPad".
This seems to have fixed the problem and turned out to be a fairly minor pain:
all GoodReader documents, recent photos/videos taken with the iPad and app groups were reinstated following a USB-cable sync with my main Mac.
but I had to re-select which music, photos, podcasts.
Now everything seems to be back to normal.
Good luck!

HT201413 I have a family itunes account- i purchased a new itouch and each time i try to purchase an app - the itouch asks me to confirm security questions that I never set.

I have a family itunes account with several devices attached... I can make purchases on all except the newest one.... each time I try to make a puchase it asks me to confirm security questions that I have never set

The reset link will only show if you have a rescue email address already set up on your account - if you don't have one then you won't get the reset option, and you won't be able to add one until you can answer 2 of your questions, you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

Re-occuring new Stickies notes each time I open

Hopefully someone has the knowledge to tackle this one: every time I restart my computer, stickies opens with a new blank note. Now, I don't mind that stickies opens with my computer, but those blank notes (if not deleted) become irritating. Could you tell me how I could get rid of that problem?
(PS- I've already deleted the "StickiesDatabase" file from Library and re-created my old stickies... problem still occurs)

Hi Brian,
As long as you have Stickies in your startup folder it will put a fresh note window on your dektop at startup.
If that is annoying, you could do this:
With Stickies open, click on its icon in the dock and select
"keep in dock". Then open System Preferences, select "Accounts" and under startup items, delete Stickies. Then Stickies will no longer load at startup, but you'll have it handy in the dock when you need it.
Hope this helps.

New email generated each time my computer wakes up

I sent along a spammy email i received to [email protected] and now my computer generates a new empty email to that address every time it wakes up from sleeping. I tried rebuilding my mailbox and deleting the spoof@paypal address from my address book. no luck. suggestions??

It appears the issue has to do with having wi-fi and ethernet connected at the same time for networking. I shut off Wi-fi and it seems to be find.
Thanks for the quick reply.
TAK

When I hit my home button, firefox opens a new tab window each time along with the homw page that it takes me to. How do I stop this extra tab from opening?

The above question says it all. I get an extra blank window opened every time I go to my home page using the Home button.

Do you have a '''|''' following the web address that you set for your Home Page in Options > General?
That vertical bar symbol is used to separate tabs URL's when multiple homepages are set as the "Home Page", and if only that vertical bar symbol is there, a blank tab will be opened.

Brand new w701ds crashes each time open second monitor

Hello. Just got my new w701ds in the mail today, and everytime I open the second monitor (or boot with it open), I get the blue screen of death and it crashes. Of course, it can't be more disapointed then to buy a product for a specific feature, and then that feature does not work. Is this known? Is it a dud? Any ideas before I send it back?
Solved!
Go to Solution.

1. Try to update all the hardware drivers and BIOS. For GPU and others, use drivers on Lenovo website to isolate the problems and check whether any 3rd party or oem driver causes this.
2. If it doesn't work, you can call Lenovo Service Center and report a case and they will resolve the problems for you. If still unsatisfied after repair or something, you can consider to get a full refund according to Lenovo. (Within 30 days after purchase)
I am not too sure how well is the service of Lenovo Customer Service at your region. Hopefully they can provide you an satisfactory services and fix your w701ds. AFAIK, W701ds is an flagship and awesome machine and Lenovo being the only one making a dual-screen mobile workstations, I don't think there will be other manufacturers making dual-screen mobile workstations.
Best Regards
Peter

Separators appear mysteriously in bookmarks toolbar, I can delete them but a new one appears each time I re-open Firefox

I have a bookmarks toolbar that I've customized. I know how to insert and remove separators. Recently every time I re-start Firefox it adds a separator at the end of the bookmarks tool bar. If don't delete them, the eventually take over the whole toolbar and I can only see my saved bookmarks through the drop down (overflow) menu. In other words the 100 or so separators run my book marks off the toolbar.
I have more plug ins than i thought based on what the "educated guesses" come up with - are any of them the problem?

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Write to new spreadshee​t each time condition is met.

Similar Messages

Maybe you are looking for

Write to new spreadsheet each time condition is met.