Writing data to a column

I cant figure this out. I havent used labview in a little while and now I have to use these things you people call "arrays" and I'm confused.
Anyway, I want to dynamically write data to a column and/or a row depending on where in the program I am.
I'm having an issue writing to a column, please help me. What am i doing wrong
Attachments:
labview3.JPG ‏22 KB

The term "array" is a pretty common term in computer programming, so if you aren't familiar with it, then you probably will have lots of problems. I suggest you start with some online LabVIEW tutorials
LabVIEW Introduction Course - Three Hours
LabVIEW Introduction Course - Six Hours
You are using Insert into Array. It looks like you are inserting into column 2. Are you sure you don't want "Replace Array Subset"?
It is hard to debug a screenshot. A copy of your VI would be better. Is your 2-d string array going into the initializer terminal of the feedback node an empty array? You can't insert new data into an array in an area past the end of an array. (i.e. if column 0 is blank, you can't insert data into column 2, what would column 1 get?)

Similar Messages

Get frequent data for each column of a table

What is the best way to get the most frequent data in each column of a table.
we have around 25 tables and each table has around 20 columns , so rather than writing group by for each column of table , is there any easy way to find this?
example we have table
Column A       Column B         Column C
Apple             Monday             Red
orange            Tuesday            Green
Apple              Monday            Red
Lemon            Wednesday       Green
Apple               Thursday         Red
in this table, column A's frequnt data is Apple , column B's frequent data is Monday , Column C's frequnt data is Red
Apple 3          Monday 2                  Red 3
Orange 2        Tuesday 1                 Green 2
Lemon 1          Wednesday 1
                      Thursday 1
Group by kind of query will give this result, but with 20 tables each having 20 - 30 columns if we need similar kind of result .. is there any way to get this data.

Hi,
GROUP BY (using aggregate functions) is the best way to do what you described.
PIVOT and UNPIVOT are probably what you'd want in this case. The phrase "GROUP BY" may not actually appear in your code, but you'll essentially be doing a GROUP BY.
Analytic functions (rather than aggregate functions) can do the job, too, but they'll be less efficient. Analytic functions get you results about the groups, without losing each row's identify, but in this case, losing each row's identity is eactly what you want to do. You only want 'Apple' to appear 1 time, not 3 times.
The fact that you need to do the same query on 20 different tables suggests that there's something wrong with your table design. Wouldn't it be better to have 1 big table, with a new column that has 20 unique values instead?
I hope this answers your question.
If not, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. For example, instead of posting a problem with 20 tables, each having 25 columns, post a similar problem involving, say, 2 tables, each with 3 columns.
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Error writing data in a flat file using UTL_FILE feature

Hi All,
I have written a package which fetches data from four different cursors and inserts into a temporary table.
Now this temporary table is used to write data in a file using the UTL_FILE feature.
fhandler :=
UTL_FILE.fopen (l_path,'Demand_Transactions_'
|| TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
|| '.txt',
'w',
max_linesize => 32767
This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.
Any help in this would be highly appreciated.
Regards,
Shruti

891330 wrote:
Hi All,
I have written a package which fetches data from four different cursors and inserts into a temporary table.
Now this temporary table is used to write data in a file using the UTL_FILE feature.
fhandler :=
UTL_FILE.fopen (l_path,'Demand_Transactions_'
|| TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
|| '.txt',
'w',
max_linesize => 32767
This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.Max linesize is the number of characters in a line before a newline has to be issued, not the number of rows written.
The error would indicate that you have a character to number conversion going on somewhere but the characters are not numeric so it's failing that conversion.
This doesn't sound like a UTL_FILE issue, but more to do with how you are building up your strings to output to the file.
You would need to show us your code that builds up the lines you are writing out, with details of the datatypes of any of the columns/variables included in that.

Input needed for writing data back into BW/ECC data

Hello Everyone,
Can anyone please let me know an example or process you have used for writing data back into BW (DSO/Cubes) or ECC systems.
We do not have integrated planning in our current system configuration currently.
So, any sample code for using any of the BAPI/RFC for writing data would be appreciated.
Also, I am trying to find out if there is any way to schedule the models developed in VC 7.1 in background to automate certain type of data processing which goes across multiple systems.
Any help would be appreciated.
Thanks.

Hello,
Can anyone please help me out on this one....
I am aware of few BAPI's such as RSDRI_ODSO_INSERT_RFC but I am not aware of what action has to be used to transfer the data from the table within VC to this BAPI and how to define the parameters as the one's available for the BAPI I mentioned do not fit into the data I have in the table within VC.
The following are the columns I have in the table within VC,
1. GL Account
2. Credit Amount
3. Debit Amount
4. Sales Amount
I have defined the DSO with the same where G/L Account is the keyfield and the rest being data fields.
Any help would be really appreciated.
Thanks.

Writing colums and reading columns

when i am writing values in the controls (VI attached).in the column headers i write deliberately
CYCLES header after giving space after TIME header.this is because when i see the corresponding text file in notepad.the headers looks fine but in the Table CYCLE header look moved to other column.in
the wordpad all headers looked moved. why it is like this? why cannot same time in table, notepad and wordpad i dont see the header on its appropriate column.
The other issue is when i am reading the same text file that i already wrote.i am getting zeros in first row,first column and last column. i am just deleting the first row and first column.i am also deleting the last column zeros. but i am not sure whether this meth
od of just deleting zeros is correct or wrong.whether i am deleting some important data or not?(VI attached).
Thanks for your help
Attachments:
save_values.vi ‏143 KB
readfilemaketable.vi ‏32 KB

You won't ever get the same look in notepad or wordpad that you would see in a table. The table automatically lines up the data in rows and columns. In notepad or wordpad, all it sees is data, space, data, space, etc. There is no mechanism to line up into columns. You could force the line up if you inserted a tab character between each data value. then you would have data, tab, data, tab,... Notepad would see the tab and move to the next tab mark, thereby lining up the columns. However, if one of the data fields or headers have more characters than the next tab mark, a misalignment could take place. If you want to see things lined up, use a spreadsheet instead of notepad.
On your second issue, the first column (column 0) and first row (row 0) are he
ader information, like "Block 1" and "Amplitude". When reading the file, these values cannot be converted to a number, so you will see a 0 in all columns of the first row and all rows of the first column. When you delete the first row and first column, you are eliminating the headers and get the correct data. Column 6 has zeros because there is no data in column 6. There is a column 6 becasue you wrote the file with a space before CYCLE. This created a column header with no data in that column. Your data for Cycle fell under the column with a space for a header. You do not need that space before CYCLE. Take it out. (Don't worry about it not lining up in a text file, it won't) Then you won't need to delete column 6 because there won't be any column 6. After deleting column 0 (Block#), you will be left with columns 1 through 6 shifting to occupy columns 0 through 5 to fill in for the deleted column.
- tbob
Inventor of the WORM Global

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

Not able to display data in different columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

OAF Export button fetching data in one column - view object using union all

Dear All,
Export button showing data in one column from view object,
View object is based on mulitple queries with union all ,
Please let me know the solution for this issue.
Thanks
Maheswara Raju

Maheswara Raju,
As per my understanding you are not able to export all the View Attribute using export Button. Only the attribute which is used with the item/region will get exported.
There are few work around in case if you want to export the column without showing on OAF Page. Let me know.
Cheers
Gyan

Need to Convert Comma separated data in a column into individual rows from

Hi,
I need to Convert Comma separated data in a column into individual rows from a table.
Eg: JOB1 SMITH,ALLEN,WARD,JONES
OUTPUT required ;-
JOB1 SMITH
JOB1 ALLEN
JOB1 WARD
JOB1 JONES
Got a solution using Oracle provided regexp_substr function, which comes handy for this scenario.
But I need to use a database independent solution
Thanks in advance for your valuable inputs.
George

Go for ETL solution. There are couple of ways to implement.
If helps mark

Insert/update japanese langunage data in a column of datatype varchar2(..)

Hello,
I am using ORACLE DATABASE 11g (EE) and RHEL 5.
I want to insert/update japanese language data in a column which has the datatype as varchar2(256).
I tried to change the NLS_LANGUAGE and NLS_TERRITORY parameters with 'ALTER SESSION set ...' command but no effect.
I tried to bounce back ( shutdown and startup ) the DB but still no effect.
I tried to inset the NLS_LANGUAGE and NLS_TERRITORY in init.ora file but still no use.
If anybody knows the detail steps which i have mentioned above .... let me know. Might be that i am wrong in my method.
Can you please guide me how to change the language of DB for a perticular session to japanese ???
Thanks in advance...
Edited by: VJ4 on May 9, 2011 6:21 PM

VJ4 wrote:
Thanks for the info.
Yes i tried with UNISTR function and was able to insert the data successfully.
but the point is that we can't remember unicode for each of the letter. It's their any method that we can directly insert japanese character using an insert.
As you said :-
Note that changing database character set is something complicated that requires many steps.
Can you please provide me some links or some stuffs to study about the detail steps of chaining database character set.
I have gone through the Oracle online documentation.. if you can pin point any good link in it you can else provide me some other stuff.
Thanks .You will need to convert your database characterset to AL32UTF8. This is not a trivial exercise if your database already has data in it. See these MOS Docs
Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode) (Doc ID 260192.1)
AL32UTF8 / UTF8 (Unicode) Database Character Set Implications (Doc ID 788156.1)
http://download.oracle.com/docs/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#g1011430
HTH
Srini

How to show current date in a column of dimension table in ssas

Hi,
I have 2 dimension tables (ALLWORK and YOURWORK) and 1 measure table (STATS). In ALLWORK dim table, I have 4 columns, one of them is END_DATE. Based on END_DATE and current date I want to create a named calculation field. To achieve this, I
want to show the current date in 5th column (of ALLWORK dim table) as calculated member (as named calculation wont show me correct date).
Problem is, I am not able to create the column in the dimension table. While creating the calculated member, I am not able to select the ALLWORK dimension table, it always selects MEASURE by default. Please help.
thanks
Tarique
thanks and regards Tarique Aslam

Hi Tarique,
According to your description, you want to add a column to your dimension to show the current date, right?
In data source view, we can add named calculation to your table. A named calculation is a SQL expression represented as a calculated column. This expression appears and behaves as a column in the table. A named calculation lets you extend the relational
schema of existing tables or views in a data source view without modifying the tables or views in the underlying data source.
Reference
http://msdn.microsoft.com/en-in/library/ms174859.aspx
http://devmau5.wordpress.com/2010/03/25/the-getdate-of-mdx/
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support

Sharepoint: Syncing dates in excel columns with Project calendar.

Hi
I am two questions if you have some time to answer:
First question: I am trying to create a detailed workflow for a Document App. I basically want to sync dates from certain columns from a number of SharePoint excel spreadsheets
with the calendar on SharePoint for my project. The dates in the excel spreadsheet will continually change depending on the progress of the project due to cell formulas therefore
i need those dates to change also in theproject calendar. I am not sure if this can be generated in a workflow (?) or indeed if this is possible at all???
I have tried to use the "Add a Workflow" link to try the above but it does not go into enough detail for me. I have SharePoint Designer installed but i am unsure of how to go about doing this.
Second question: Is there a way to generate a workflow to sync tasks in the Tasks App assigned with "to be completed by" dates with the Project calendar? I would like to be able to create a task, assign it to someone with a due date and then
have that task appear in the project calendar.
I would very much appreciate any help you could provide me with this.
Thank you
Ray

Does anyone have any ideas on how to complete my task above??? I'd be grateful for any suggestions.
Ray

Calculation Field to be mapped to different data object's column name in Oracle BAM 12c

Hi,
I am having a challenge to enable drill down to 2nd level report by passing calculation field as parameter.
As an alternative, I am thinking to point calculation field to another data object’s column name and generate report so that I would be able to pass that as parameter to drilling report view.
Is there any way to map calculation field to different Data object’s column name? Thanks in advance.
Regards
Amik Basu

1. Yes, you can.
SQL> create table ÜÝÞ( ßàá number(10));
Table created.
SQL> insert into ÜÝÞ values (10);
1 row created.1.1 and 1.2 and 2. You can choose UTF as your default character set. It allows the user of non-English characters in VARCHAR columns in your whole database. It is not per tablespace.
SQL> create table ÜÝÞ( ßàá varchar2(100));
Table created.
SQL> insert into ÜÝÞ values ('âãäçìé');
1 row created.

Return data from all columns apart from a certain data type.

Bit stuck on something, hope somebody here can help:
I want to do a 'select * from ' a table, to return all columns except ones of a certain datatype. ie. I want to return data from all columns, excluding columns of datatype 'SDO_GEOMETRY'.
This gives me the list of columns:
SELECT COLUMN_NAME
FROM   USER_TAB_COLUMNS
WHERE TABLE_NAME = 'ORDER_ITEM'
AND   DATA_TYPE <> 'SDO_GEOMETRY'; But I can't seem to take it any further...
Now if I knew the columns beforehand, then of course I could just list them, excluding the geometry column, but this is to be used for a plug-in for MS Word, where a user can pick database columns to dynamically fill a report from - but I don't want the geometry columns as these can't be handled in this way.

Hi Reggie,
> connects to the database and presents a list of tables
My guess is that this macro is written so it selects from all_tab_cols.
Change that plugin and let it select from a view like the one above. That way, the users won't be able to see/pick anything that you are not able/willing to present for them.
Edit:
You could even tease your users, and let them see the columns, but not being able to pick them.
create or replace view available_tab_columns
as
   select decode(pickable.data_type, null, 0, 1) pickable
         ,atc.* -- narrow down yourself
     from all_tab_cols atc -- or maybe user_tab_cols
         ,(select 'CHAR' data_type from dual union all
           select 'DATE' from dual union all
        select 'NUMBER' from dual
           -- complete positive list, yourself
          ) pickable
    where atc.data_type = pickable.data_type(+);Regards
Peter
Message was edited by:
Peter Gjelstrup

Writing data to a column

Similar Messages

Maybe you are looking for