Writing MDX query in outline??????
Hi All,
I have to write one MDX query for account member.
Hierarchy:
Accounts
---acm1
---acm2
---acm3
Time
---2011
------Jan, 2011
------Feb, 2011
---2010
------Jan, 2010
------Feb, 2010
Division
---East
------A
---------a
------B
---------b
---West
---North
---South
Now i need to calculate AVG for acm1 which is in accounts dimension based on Year and Division.
I have written
Sum(([Accounts].[TotalCreationToInvoiceDayNumber],[TimeMonth].CurrentMember.LastChild):([Accounts].[TotalCreationToInvoiceDayNumber],[TimeMonth].CurrentMember.LastChild.LastChild.Lag(11)))
Count(CrossJoin({[Accounts].[TotalCreationToInvoiceDayNumber]},{({[TimeMonth].CurrentMember.LastChild.LastChild:[TimeMonth].CurrentMember.LastChild.LastChild.Lag(11)})}
But it is not working, Can you please help me to complete this query????
Thanks,
Prathap
This will give you some idea
Re: Writing formula in Outline??????
Regards,
RSG
Similar Messages
-
Writing MDX query???
Hi All,
I have to write one MDX query for the below general formula.
For Year = 2011
If TotalPolicyCount > 0 Then
(TotalePolicyCount / TotalPolicyCount) * 100
Else
0
For Year = 2010
If TotalPolicyCount > 0 Then
Avg (TotalePolicyCount / TotalPolicyCount) * 100
Else
0
For Year = 2009
0
Can you please let me know how to write MDX.
Thanks,
PrathapThis will give you some idea
Re: Writing formula in Outline??????
Regards,
RSG -
ASO MDX query in outline??????
Trying to write a MDX query for the Account member
Hierarchy:
Account
A001
A002
A003
A008
Scenario
AG00
AG01
AG06
AG08
AG09
Organization
ETCE
E023
E024
E070
I need to caluculate for the Account AG08 the value should be derived from AG07 and for the same account AG08 for the Organization member "E070" the value should be same as AG09 ( i.e AG09 = AG08 )
I writen below query at the level "0" retrival query is good but when i use the Top level query "ETCE" parent level the value in "E070" is eliminating . Query writen below
NONEMPTYMEMBER [A001],[A007]
CASE
WHEN (IS([Organization].CurrentMember, [E070])) THEN
([A009])
WHEN (IS([Scenario].CurrentMember, [AG00])) THEN
(([A007] * -1)/100)
WHEN (IS([Scenario].CurrentMember, [AG01])) THEN
(([A007] * -1)/100)
WHEN (IS([Scenario].CurrentMember, [AG02])) THEN
(([A007] * -3)/100)
WHEN (IS([Scenario].CurrentMember, [AG03])) THEN
(([A007] * -10)/100)
WHEN (IS([Scenario].CurrentMember, [AG04])) THEN
(([A007] * -20)/100)
WHEN (IS([Scenario].CurrentMember, [AG05])) THEN
(([A007] * -80)/100)
WHEN (IS([Scenario].CurrentMember, [AG06])) THEN
([A007])
ELSE
Missing
END
At Bottom level "0" results are coming as expected but Its not working at the top level Organization ETCE level Please help ????
Thanks
Venu
Edited by: user13351102 on Oct 28, 2011 5:19 PM
Edited by: user13351102 on Oct 28, 2011 6:31 PMGuru's any help on this ASO Member formula query ??
-
Date parameters using MDX query
Hello experts,
Not sure if this question falls under SSAS or SSRS but I'm writing it here for now and hopefully get the answer.
I'm using SSAS cube to develop a report using SSRS and this is the first time I'm doing it. I want to filter records based on date range and did some research online. My report contains two datasets:
1. dsMain dataset -> it contains all the field which I want to use in the report and added a parameter thru query designed with following settings:
Dimension : Dates
Hierachary : Date
Operator : Range (Inclusive)
Parameters : checked
it created two parameters called FromDatesDate and toDatesDate
2. I created another dataset called dsDate and wrote a custom query (found at following link) and changed FromDatesDate and ToDatesDate using this date dataset
https://jsimonbi.wordpress.com/2011/03/22/using-a-date-parameter-in-ssrs-with-mdx/
Query for dsDate
WITH
MEMBER DateValue
AS
[Dates].[Date].CurrentMember.UniqueName
MEMBER DateLabel
AS
[Dates].[Date].CurrentMember.Name
SELECT
[Measures].[DateValue],
[Measures].[DateLabel]
} ON 0,
[Dates].[Date].[Date]
} ON 1
FROM [myCube]
Here is the value returned by dsDate dataset (above query)
DateValue DateLabel
06/04/1980 [Dates].[Date].&[29375]
06/04/1980
06/05/1980 [Dates].[Date].&[29376]
06/05/1980
06/06/1980 [Dates].[Date].&[29377]
06/06/1980
06/07/1980 [Dates].[Date].&[29378]
06/07/1980
06/08/1980 [Dates].[Date].&[29379]
06/08/1980
06/09/1980 [Dates].[Date].&[29380]
06/09/1980
06/10/1980 [Dates].[Date].&[29381]
06/10/1980
06/11/1980 [Dates].[Date].&[29382]
06/11/1980
06/12/1980 [Dates].[Date].&[29383]
06/12/1980
06/13/1980 [Dates].[Date].&[29384]
06/13/1980
Here is what I changed in FromDatesDate and ToDatesDate parmeter:
Under Available Values tab:
Dataset : dsDate
Value Field : DateValue
Label Field : DateLabel
Here are my questions:
1. I want to use date/time parameter so that user doesn't have to scroll thru whole date dimension.
2. I changed the FromDatesDate and ToDatesDate to date/time parameter, removed the values from Available values tab and made the following changes on Parmaeters expression under dsMain dataset
=”[Dates].[Date].&[” + Format(CDate(Parameters!FromDatesDate.Value),”MM/dd/yyyy”)
+ “T00:00:00]”
=”[Dates].[Date].&[” + Format(CDate(Parameters!ToDatesDate.Value),”MM/dd/yyyy”)
+ “T00:00:00]”
Now when I run the report I get following error:
Query (1, 55) The restrictions imposed by the CONSTRAINED flag in the STRTOMEMBER function are violated.
I think the reason is by changing parameter to date/time, now I cannot get "DateValue" which is required for the query.
1. What is the best way to work with date parameters?
Hope it is all clear and look forward to hear from experts.
Thanks,
P
mark it as answer if it answered your question :)Hi Parry2k,
In Analysis Services, a member can be referenced by either its member name or by its member key. The member key is used by the dimension to specifically identify a given member. The ampersand (&) character is used in MDX to differentiate
a member key from a member name. In this scenario, the datetime is member name, not the member key. So you should not add "&".
Reference:
Member Names and Keys
Simon Hou
TechNet Community Support -
MDX query for parent-child combination display
Hi guys..
I am really new to the Essbase technology.
Could you please help me out with this one:
is it possible to extract the data(for example the metadata of a outline)..eg:-
The outline structure is as follows :
A1
A11
A12
A2
A21
A22
I want a MDX query to display it as :
A1 A11
A1 A12
A2 A21
A2 A22
I have tried various ways but couldnt come up with a query for this.
Thanks in advance for all your help.Unfortunately MDX cannot do this. If you think about what you are asking for, you are essentially saying that you want to see members of the same dimension on different axis. Multi-dimensional queries can't do that (think about trying to do it with addin).
A further limiation is that MDX is not robust enough to allow you to work the results into a single axis using a concatenation function because while there is a string-to-member function, there is no member-to-string function and concat requires a string as input.
Other approaches would require MDX to support joins or subqueries, which it does not.
As others have mentioned, to do what you want to do, you need outline extractor or something like that.
*Fun fact - if you have OBIEE 11g, it can do reporting in Essbase with hierarchy members in hierarchy format or column format, which will give you the results you need. That alone is good reason to start using OBIEE. -
hi,
Need a help regarding the Initialization block which connects to a Essbase and fetches the results using a MDX query.
I need to get the Max of the month cube column and put in a variable.
The cube time hierarchy contains the column at the 5th physical level with values as 2008 August, 2008 December, 2009 January and 1994 March etc.
Now I want to get the Max of the value i.e. 2009 January.
I saw another Init block with the query. This query gave result as 1994 March.
select
{} on columns,
{ClosingPeriod([DEPMTI01].Generations(5))} on rows
from [XXX.YYY]
Now when I modified the query to below and run it throws an syntax error.
select
{} on columns,
{Max([DEPMTI01].Generations(5))} on rows
from [XXX.YYY]
Please help me out with the correct way on writing the MDX so as I can fetch my desired result of 2009 January.
Regards,
BhavikHi Manas,
As u would know ParForEach i sused if u have parallel processing branches,
The max u can have is 999.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/frameset.htm
Hope it helps!!!!!!!!!!!
Reward points if u found it useful -
MDX Query Editable in BO 3.0?
Hello, everyone,
We are building BObj Universes in Version 3.0 against SAP BEx Queries. We have installed the "flattening error" service packs on the BW side, and have read and worked through the forum posts. Our issue is creating objects in the Universe, with the guidelines outlined by Didier in "OLAP universes best practices" document.
We can create simple objects in the Universe, but when we try to add the MDX functions to perform a rolling aggregate across time (the last 12 fiscal periods) or to find the corresponding value for the same period for one year ago, we get an error in the report.
So, we have a couple of questions:
1. Is there anyplace to see / edit the MDX query, like can be done in a relational universe?
2. Where exactly in the Universe does the syntax outlined in Didier's Best Practice document go? We have tried in the Universe object definition, but cannot see anywhere else to place the syntax.
Thanks for any assistance!
Regards,
JudyHi Judy,
Here is an example of YTD on previous member:
<EXPRESSION> SUM(YTD([0CALMONTH].PrevMember), [Measures].[4OHSNHMBZDWBV5J6NOYCWXZXV]) </EXPRESSION>
You can also use MDX expression such as PERIOSDTODATE or PARALLELPERIOD for returning the value of a n previous member at a given level.
Example, measure for the 3rd previous member at any level:
<EXPRESSION> ( [Measures].[4OHSNHMBZDWBV5J6NOYCWXZXV], PARALLELPERIOD( [0CALMONTH].currentmember.level, 3, [0CALMONTH].currentmember) ) </EXPRESSION>
Example, YTD with parallelperiod:
<EXPRESSION> SUM(YTD( PARALLELPERIOD( [0CALMONTH].currentmember.level, 1, [0CALMONTH].currentmember) ), [Measures].[4OHSNHMBZDWBV5J6NOYCWXZXV]) </EXPRESSION>
Please have a look on the Microsoft documentation for parallelperiod:[http://technet.microsoft.com/en-us/library/ms145500.aspx]
Best regards
Didier -
MDX Query: Equivalent of SQL's "IN" clause
Hi,
In SQL, we have an option of viewing data of multiple members by specifying IN as follows:
SELECT column1 from TABLE WHERE
column2 in ('value1','value2');
Is there any equivalent of that in MDX?
Let's say my outline is like this:
--Products (Standard Dimension)
|_____Computers (+)
|_____ Televisions (+)
|_____Others (+)
--Regions (Standard Dimension)
|_____North(+)
|_____ South (+)
|_____East(+)
|_____West(+)
--Measures (Accounts Dimension)
|_____Estimate Sales
|_____Actual Sales
I would like to answer this question:
What is the actual sales and estimate sales of each product in "North" and "East" regions?
If the region constraint is not there, the MDX query would be:
SELECT Products.Members on Rows
{[Estimate Sales], [Actual Sales]} on Columns
from appName.dbName
How do I modify this query to include only North and East regions, and still selecting product on rows?
Thanks in advance.
Regards,
Vivek GanesanJust add a where condition:
WHERE
({[Regions].[North], [Regions].[East})
for more info:
Member range specification:
http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/mdx_memberrange.htm
Slicer specification:
http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/mdx_slicer_spec.htm
Hope this helps -
Converting MDX query into SQL Server 2008
We have MDX query based OLAP CUbes.
To reduce MDX based dependenies, we have to convert MDX based cube to sql server 2008 based queries.
For this I need expert advise to convert below query to sql server 2008 based query :
CREATE MEMBER CURRENTCUBE.Measures.[Ack Lost]
AS 'Sum(PeriodsToDate([Time].[Year], [Time].CurrentMember ), [Measures].[Lost])',
FORMAT_STRING = "#,#",
VISIBLE = 1;Hi Sachin,
According to your description, you need to convert the MDX query to T-SQL query, right?
Your MDX query is calculated measure that return the total value from the first sibling and ending with the given member. In T-SQL query we can use the query as Yogisha provided to achieve the same requirement. Now you need to a tool to convert all the MDX
related SSAS cube queries to MS SQL Server 2008 based queries.
Although MDX has some similarities with T-SQL these languages are in many ways different. Beginning to learn and comprehend SQL Server Analysis Services (SSAS) MDX queries can be difficult after one has spent years writing queries in T-SQL. Currently, there
is no such a tool to convert a MDX query to T-SQL query since the structure difference between MDX and T-SQL. So you need to convert them manually, please refer to the links below to see the details.
http://www.mssqltips.com/sqlservertip/2916/comparison-of-queries-written-in-tsql-and-sql-server-mdx/
https://sqlmate.wordpress.com/2013/11/12/t-sql-vs-mdx-2/
http://technet.microsoft.com/en-us/library/aa216779(v=sql.80).aspx
Regards,
Charlie Liao
TechNet Community Support -
Filters not getting passed in MDX query while using SAP BW with OBIEE
Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
RockyHello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky -
Hi All
I am new to MDX language and need a MDX functions/query on the cube to get the required output, Given below is the scenario with the data.
I am maintaining the data in a table in dataMart with given structure. We have the data at day and weekly in a single table with granularity indicator and count is the measure group column. While loading the data in to mart table we are populaiting the week
Key from week table and Month key from month table and joining in the cube.
we need to calculate the inventory for a particular month. If a user selects a particular month the output would be count = 30 as a measure called Closed and count = 16 as a measure value called Open.
Need a MDX query to get output.
Granularity Count WeekKey MonthKey
Weekly 16
W1 M1
Weekly 17
W1 M1
Weekly 18
w1 M1
Weekly 19
W1 M1
Weekly 20
W1 M1
Weekly 21
W1 M1
Weekly 22
W1 M1
Weekly 23
w2 M1
Weekly 24
w2 M1
Weekly 25
w2 M1
Weekly 26
w2 M1
Weekly 27
w2 M1
Weekly 28
w2 M1
Weekly 29
w2 M1
Weekly 30
w2 M1
Weekly 16
w3 M1
Weekly 17
w3 M1
Weekly 18
w3 M1
Weekly 19
w3 M1
Weekly 20
w3 M1
Weekly 21
w3 M1
Weekly 22
w3 M1
Weekly 23
w4 M1
Weekly 24
w4 M1
Weekly 25
w4 M1
Weekly 26
w4 M1
Weekly 27
w4 M1
Weekly 28
w4 M1
Weekly 29
w4 M1
Weekly 30
w4 M1
Thanks in advanceHi Venkatesh,
According to your description, you need to count the members with conditions in a particular month, right?
In MDX, we can achieve the requirement by using Count and Filter function, I have tested it on AdventureWorks cube, the sample query below is for you reference.
with member [ConditionalCount]
as
count(filter([Date].[Calendar].[Month].&[2008]&[2].children,[Measures].[Internet Order Count]>50))
select {[Measures].[Internet Order Count],[ConditionalCount]} on 0,
[Date].[Calendar].[Date].members on 1
from
(select [Date].[Calendar].[Month].&[2008]&[2] on 0 from
[Adventure Works]
Reference
http://msdn.microsoft.com/en-us/library/ms144823.aspx
http://msdn.microsoft.com/en-us/library/ms146037.aspx
If this is not what you want, please elaborate your requirement, such as the detail structure of your cube, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
Hello everyone,
I created following calculated member in MDX query. I am using it in one of the report parameter in dataset (single select dropdown list as report parameter).
WITH MEMBER [Measures].[ParameterCaption] AS
CoalesceEmpty([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION,'None')
I would like to display 'None' text at the top of the dropdown list values. So that when user selects 'None' then this parameter will not considered in MDX query else the selected National Account Code will be considered to filter report data. But,
the above return blank/empty value for [Customer].[National Account Code].& member though I specified 'None' as text in CoalesceEmpty function. Any advice would be appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.htmlHi Ankit,
It seems that you issue had been solved in your another thread.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5a5becac-226f-428a-95b0-aaaa22733818/ssrs-report-with-tabular-model-create-a-dropdown-report-parameter-with-none-option-as-the-top?forum=sqlanalysisservices#0e51bf8c-a66c-4df5-a244-0147728fdfdb
iif([Customer].[National Account Code].CURRENTMEMBER.MEMBER_CAPTION="","None",[Customer].[National
Account Code].CURRENTMEMBER.MEMBER_CAPTION)
I marked this reply as answer, it will benefit to other members who have the similar issue.
Regards,
Charlie Liao
TechNet Community Support -
SSRS report with cube – MDX query how to get an extra row with value '0'.
Hello everyone,
I'm unable to write the MDX query to get '0' value as first row in output. Following is my MDX query:
WITH MEMBER [Measures].[Dummy] AS '0'
SELECT NON EMPTY Union( {[Measures].[Amount] },{[Measures].[Dummy]}) ON COLUMNS,
NON EMPTY { ([Customer].[Customer Nbr].[Customer Nbr].ALLMEMBERS * [Fiscal].[Year].[Year].ALLMEMBERS ) }
having [Measures].[Amount] > 5000
ON ROWS FROM [cube]
With above query, the output returns the value '0' as a separate column.
I would like to get it in form of first row for [Measures].[Amount]. Like,
Amount
0
500
200
100
What needs to be changed to achieve the above result? I'm planning to use the above value in line chart to start the line from 0th value as described in following URL. (Note: The below URL is using SQL query and not MDX expressions.)
http://spinerain.blogspot.in/2013/09/ssrs-line-chart-create-stacked-line-and.html
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.htmlThe round brackets in your expression are forcing an implicit crossjoin between the 3 lines. I would do the following which creates a set of the DummyYear plus the real year members and then crossjoin that with the customer set.
WITH MEMBER [Fiscal].[Year].DummyYear AS '0'
SELECT NON EMPTY {[Measures].[Amount]} ON COLUMNS,
NON EMPTY {[Fiscal].[Year].DummyYear,
[Fiscal].[Year].[Year].MEMBERS} *
[Customer].[Customer Nbr].[Customer Nbr].MEMBERS
having [Measures].[Amount] > 5000
ON ROWS FROM [cube]
http://darren.gosbell.com - please mark correct answers -
How to union results from 3 different dimensions in where clause with or - Mdx query
Hi
I have a MDX Query and i need to pass the variable values to it by dynamically.
Each time it will get any one attribute from three dimensions.
Select
{} ON Columns,
{} ON Rows
From
Cube
Where
[Dimension1].[Attribut].&[Value]
or
[Dimension2].[Attribut2].&[Value]
or
[Dimension3].[Attribut3].&[Value]
So It is working for two different values by using union and cross join.
Can you please provide the solution ..
Thanks in advanceHi Philip
Thanks for replying me.
I tried on that way, In my mdx query i am using one slice attribute (i.e [Customer].[Gender].allmembers) in rows so getting error "The Hierarchy already appears in Axis1".
SELECT
{[Measures].[Internet Sales Amount] } ON 0,
NON EMPTY
{[Customer].[Gender].allmembers } ON 1 -- Used
FROM
[Adventure Works]
WHERE
[Customer].[Gender].&[M]
,[Product].[Size Range].[(All)]
,[Customer].[Country].[All Customers]
[Customer].[Gender].[All Customers]
,[Product].[Size Range].&[XL]
,[Customer].[Country].[All Customers]
[Customer].[Gender].[All Customers]
,[Product].[Size Range].[(All)]
,[Customer].[Country].&[Australia]
Can you provide alternate ways to get resolved.
Thanks in advance -
How to get the child data in MDX query?
I have an MDX query that will return the data for an OLAP report. These report data include the parent_id, child_id and some dimensions data in it. How do I modify the MDX query to have a New member to show a dimension value of the child_id.
The child_is is actually the parent_id on another row. It is the "Pstpd Decision" I want to be included in a new column using the "Appeal Id". Thanks
WITH MEMBER [Measures].[Avg TA Time] AS [Measures].[Turn Around Time]/[Measures].[Number of Request]
SELECT NON EMPTY { [Measures].[Number of Request] } ON COLUMNS,
NON EMPTY { ([Request Date Time].[FY-AP].[Account Period].ALLMEMBERS *
[Request Drugs].[Drug Generic Name].[Drug Generic Name].ALLMEMBERS *
[Dispensary].[Dispensary Hierarchy].[Dispensary].ALLMEMBERS *
[Disease].[Tumour Group Site].[Tumour Group Site].ALLMEMBERS *
[Disease].[Tumour Group Sub Site].[Tumour Group Sub Site].ALLMEMBERS *
[Patient].[Patient Agency ID].[Patient Agency ID].ALLMEMBERS *
[Pstpd Decision].[Decision].[Decision].ALLMEMBERS *
[Request].[Request Id Key].[Request Id Key].ALLMEMBERS *
[Request].[Appeal Id].[Appeal Id].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM ( SELECT ( { [Appeal Yes No].[Status].&[Yes] } ) ON COLUMNS
FROM ( SELECT ( STRTOSET(@RequestDateTimeFiscalYear, CONSTRAINED) ) ON COLUMNS
FROM [CAP Request])) WHERE ( IIF( STRTOSET(@RequestDateTimeFiscalYear, CONSTRAINED).Count = 1, STRTOSET(@RequestDateTimeFiscalYear, CONSTRAINED), [Request Date Time].[Fiscal Year].currentmember ), [Appeal Yes No].[Status].&[Yes] ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
data.
KahluaI got it to work by adding the child_id's "decison' to the fact table as it is alot easier to get that data using Sql Script while creating the fact table and also there is already a "decsion" dimension setup. In the cube I can select the
parent_id's decision and/or child_id's decision. It is working on the report. Thanks.
Kahlua
Maybe you are looking for
-
Hard Drive Upgrade Issue TX1320us
Hi all, I'm trying to get some feedback on a hard drive issue that I have. I recently have been experiencing what I deemed "failing hard drive" so I took the plunge and bought a new one. The problem I am having is that the BIOS is not recognizing the
-
I have often been puzzled as to why a document name changes. E.g. In simple terms. I login to an account, navigate to a page, check a phone number on the screen is correct. It would seem simple wouldn't it.But if I login to one account the document n
-
I cannot open Firefox at all!!!
I really hope someone can help me with this it's driving me crazy to have to use Internet Explorer. All of a sudden yesterday when I booted the laptop up, I have been unable to open Firefox. I click on it, and just nothing happens whatsoever. I've tr
-
Hello, I am setting up a very simple scenario where I am making a sychronous RFC call to a BAPI in R/3 (Version 4.6c) from an XI Sandbox (Version 7.0). I have the RFC Communication channel properly configured, or so I think, and have verified e
-
Siebel Application 7.8 monitoring through Sitescope.
Hi, I need to monitor Siebel Application 7.8 through HP tool. As per the doc its mentioned "The Siebel Server Manager client must be installed only on the machine where tool is running". But as per my vendor,siebel 7.8 doesn't have the server manager