Writing Select statement for JDBC Adapter

Dear frndz,
Please guide me, i have to pick record form the Oracle D/B,
and this has to be updated in the Sap Table. For this scenario, tell me where i have to write the select statements to fetch the particular record.I was asked to use the jdbc adapter for this d/b link.
Thanks in advance
Karthikeyan

Hi karthikeyan,
You have to use a sender JDBC adapter.
Just follow the instructions in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Previously, you must install Oracle drivers so that JDBC works properly.
Regards,
Carlos

Similar Messages

DYnamic select statement in JDBC adapter?

Hi guys,
Is it possible so send dynamic select statement in jdbc adapter?
XIer

Aamir,
The poster did not specify whether this was sender or receiver channel, but it would only make sense that a "dynamic query" must be on the receiver communication channel since if it was on the sender channel, the channel would have to intelligently determine how to do dynamic queries.
Also, the poster asked if there was a way to "send a dynamic query" to the channel. This seems to imply that the channel is receiving information from somewhere to determine the query, which could only mean it is a receiver channel.
If you would like more information on the JDBC sender communication channel, please open a new thread.

Select statement for JDBC receiver synch scenario for capturing random value from ECC portal

Dear Experts,
I am working on ECC <----> SAP-PO 7.31 <----> JDBC synchronous scenario. I am clear about the config part except the Select statement. I will be
capturing 2 random values from the portal i.e. VendId and VendName in ECC to get the vendor details like Vendor Country, Vendor Status, Vendor Contact , Vendor Address etc from JDBC vendor table/view VENDETAIL.
What would be the select statement to capture the random values for ECC portal? My select statement would look some thing like this..
Select f1,f2,f3,f4 from table VENDETAIL where key1 = "VendId" and "VendName"
Please suggest if the above select statement works for the above scenario...
Regards
Rebecca

Hi Rebecca,
Your statement should work fine.
Please see the statement we use below.
SELECT eT_cashier, eT_proc_yn, eT_proc_date FROM eTest WHERE eb_proc_yn = 'N'
Just remember to update the change indicator so that you dont duplicate your records.
UPDATE eTest SET eb_proc_yn = 'Y' WHERE eb_proc_yn = 'N'.
Regards,
Jannus Botha

About 2 questions for jdbc adapter.

1.
    which transaction isolation level should i set for jdbc sender adapter to guarantee data to be selected correctly?
    not error occurs.
2.
    how to reslove time_out error for jdbc adapter. especially sync query in volume data case.

Hi,
If you want to maintain the sequence and data consistency, then use isolation level "serializable" and QoS as EOIO.
Set / Increase the time_out parameter in the adapter module.
Regards,
Neetesh

"Recordsets per Message" for jdbc adapter

Hi all,
is "Recordsets per Message" kind of option is available for JDBC adapter.
Any help will be appriciated
Thanks
-Kulwant

Hi Kulwant,
its not available.
You can a stored procedure whick picks only certain number of records per each call.
Regards
Inder

How to write Select statement for this codition

I need to check whether SGTXT contains BELNR value.
SGTXT is a text field and It should be matched with BELNR
How to write select statement for this.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT should have the given BELNR Value.
Plz note : Here I cannot give as SGTXT = BELNR as coz BELNR have only 10 digits.

Hi,
data temp(12).
concatenate '%' belnr '%' into temp.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT like temp.
If belnr is having multiple values,just create a internal table as follows.
types : begin of ty,
        belnr....
        temp(12),
        end of ty.
data itab_ type standard table of ty.
data wa type ty.
loop at itab into wa.
concatenate '%' wa-belnr '%' into wa-temp.
modify itab from wa index sy-tabix transporting temp.
endloop.
Change your select statement accordingly.
Kindly reward poits if it helps.

Select statement for summing values in column?

How to write a select statement for sap standard table which contains data as given below
col1        col2
A     10
A     20
A     30
B     50
B     60
C     70
Need the output of select in internal table as given below
A     60
B     110
C     70
Regards,
Rachel

Thanks for all the valuable input.
Below I have used sum in select statement(check case 2"),but i am not getting required o/p.
Kindly guide me.
case1 :
select aebeln aebelp bpackno bmenge
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
order by aebeln aebelp b~packno .
O/p for the above .
ebeln                       ebelp         packno                             menge
6000000100     00010     0000001025              6.000
6000000100     00010     0000001025               5.000
6000000100     00010     0000001025              2.000
6000000100     00010     0000001025              1.000
6000000100     00010     0000001025              2.000
case2:
select aebeln aebelp bpackno sum( bmenge )
into corresponding fields of table itab
from ( eslh as a inner join esll as b
on bpackno = apackno )
where a~ebeln = 6000000100
and a~ebelp = 00010
and a~packno = '0000001025'
group by aebeln aebelp b~packno
order by aebeln aebelp b~packno .
6000000100     00010     0000001025     0.000
Edited by: Rachel on Nov 25, 2008 11:45 AM
Edited by: Rachel on Nov 25, 2008 11:46 AM

DISTINCT in SELECT statements for Entities / Views - Oracle JDeveloper 11G

Hi Steve,
i have a question about using DISTINCT in SELECT statements for
Entities / Views. On Oracle JDeveloper 11G ADF / BC4J
--- This is unique---
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
from "grp_courses" GC
--- This is NOT unique, but ROWID seems to be mandatory as PrimaryKey---
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
rowid
from "grp_courses" GC
How to use this query;
SELECT
distinct(GC."course_title"),
GC.SEC_GRP_PARENT_ID,
from "grp_courses" GC
and yet still be able to use it in View / Entity without a Primary Key or some equivalent solution.
Thanks & Regards,

Hi, OK - I got it to work...
Some notes:
1) The View wizard cannot be initiated from the Entity Object.
2) During the View wizard process - do not associate with Entity
3) Selected columns must be mapped as expressions
4) Using non-distinct columns will override the distinct function

Where to see generated SQL statement from jdbc adapter?

Hi everybody,
where can I see the generated SQL statement from JDBC adapter?
Regards Mario

Yes and True lterally means the same, but alas XI does not understand literature..
Just checked the note as well, as you are correct!
Regards
Bhavesh

How to increase the thread count for JDBC adapter

Hi ALL,
Could someone advice me on how to increase the thread count for JDBC Adapter in Visual Admin:
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 5
I need to increase them to 10.
Regards,
Xier

hi check the below links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a
admin manual:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fdb09490-0201-0010-e09e-a76388646ad0
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Regarding select statement for this requirement

Hi................
good evening
here is a requirement.
i want to retrieve data from the following table.but how to join these table is my dought.
tables fields
t001w--werks " plant id
t001w--name1 " pl;ant name
t001w--regio " plant address
ekko--ebeln " purchase order
ekko-erdat : creation date
ekko-ernam "name of the person
ekpo-ebelp " item
ekpo-bstyp "purchase order type
eket-erdat " delivery date
mara-matnr " material number
these are the tables and fields.now we want to retrive data from these tables
how we have to code select statement.
selection-screen is
plant id
order type
delivery date
please provide select statement for this requirement.
thanks and regards.
k.swaminath reddy.

Is this what you are looking for?
SQL> CREATE OR REPLACE FUNCTION f_team
2 RETURN VARCHAR2
3 IS
4    s_return VARCHAR2(500);
5 BEGIN
6    FOR i IN ( select team from t_team order by 1) LOOP
7      s_return := s_return || i.team || ', ';
8    END LOOP;
9
10    RETURN substr(s_return, 1, length(s_return) - 2);
11 END;
12 /
Function created.
SQL> SELECT f_team FROM dual;
F_TEAM
Australia, Bangladesh, England, India, Kenya, Pakistan, South Africa, UAE, USA, West Indies, Zimbabwe
SQL>

Need Select statement for fetch the details

Hi
i want to fetch particular customer wise sales orderds and that sales order No and date of sales order was created.. and that sales order related PO No and Materials ..
for this.. how can i write an executable programm.. is it needed to define seperate internal tables or single internal table is enough ?
what is the select statement for fetching all these details..
any help will be appriciated
Thanks
Bbau

custmer master table is KNA1 knb1 knbk
sales data tables r VBAK VBAP VBEP
Material data MARA, MARAC, MARD
PO RELATED ekko ekpo eket
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:04 PM

Equivalent select statement for complex selection

HI,
What is the equivalent select statement for below mentioned condition.
SELECT-OPTIONS : SALEDOCU FOR VBAK-VBELN OBLIGATORY,
                 DATE     FOR VBAK-ERDAT OBLIGATORY,
                 CHANEEL FOR VBAK-VTWEG,
                 SALETYPE FOR VBAK-AUART OBLIGATORY DEFAULT 'QT'
                 NO INTERVALS NO-EXTENSION.
Regards,
John.

hi,
you can use following code.
tables vbak.
data : begin of t_vbak occurs 0.
         include structure vbak.
data : end of t_vbak.
select * from vbak into table t_vbak where
                        vbeln in saledocu and
                        erdat in date and
                        vtweg in chaneel and
                        auart in saletype.
Hope this helps.
Regards,
Shashank

Select statement for retrieving infotype 1005 values w,r,t payscale

Hi All,
could you pls help me for the below requirement
"select statement for retrieving infotype 1005 values with respect to the pay scale level.
because pay scale level is having range of values in the infotype"
Thanks in advance
Prasad
Please try it yourself first.
Edited by: Suresh Datti on Aug 9, 2009 4:52 PM

Hi,
Code which you have written is correct when the R_DATE is having LOW and HIGH values, if the R_DATE is having only LOW value then this will be wrong, becuse if the R_DATE is having only LOW then OPTION value is not BT is should be EQ
Regards
Sudheer

Update statement problem for jdbc adapter

Hi all
In the jdbc sender adapter, I configured as follows:
Query statement
select * from pickdiff where tid is null
Update statement
delete from pickdiff where tid is null
I got following error message:
Database-level error reported by JDBC driver while executing statement 'delete from pickdiff where tid is null'. The JDBC driver returned the following error message: 'java.sql.SQLException: [SQLServer 2000 Driver for JDBC][SQLServer]Die Unterabfrage gab mehr als einen Wert zurück. Das ist ungültig, wenn die Unterabfrage auf =, !=, <, <= , >, >= folgt oder als Ausdruck verwendet wird.'. For details, contact your database server vendor.
If I change the Update statement to
update pickdiff set tid = 'sapxi' where tid is null
Then everything is ok.
Doese any one have some idea about this problem?
Regards
Hui

Hi,
The below statements are from SAP help...
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm
The UPDATE statement must alter exactly those data records that have been selected by the SELECT statement. You can ensure this is the case by using an identical WHERE clause. (See Processing Parameters, SQL Statement for Query, and SQL Statement for Update below).
● Processing can only be performed correctly when the isolation level for transaction is set to repeatable_read or serializable.
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = 1 WHERE processed = 0;
processed is the indicator in the database.
please see if setting the isolation level would help....Also are you getting this error always or is it intermitent ?
Thanks,
Renjith

Writing Select statement for JDBC Adapter

Similar Messages

Maybe you are looking for