Writing to the spool the ouput
Hi All,
The alv which i have displayed as output should be sent to the spool in the same program of report.
Reagrds
kumar
Hi,
Just run the report in Background mode.
It will be written into a spool file.
Please reward points if this explanation is useful.
Regards,
Siva
Similar Messages
-
Eliminate page heading in the spool of ALV report
Hi,
We are running the ALV report in the background, and when we view the spool
the page heading and the column heading is displayed for all the pages, Is there some way to
eliminate this.
The download from the on-line exec is fine,but the download from the spool includes the column
headings for each page. Is there some way to check if the ALV report is run in the batch mode
and to disable the heading from Page 2 to N.
Appreciate any input.
Thank you
LalithaHi,
I need to avoid the column headings also, I need the heading in the first page, but not on the subsequent pages.
Is there any setting in the ALV function modules to prevent this ?
So wanted to know if there is some setting to accomplish that.
Thank you
Lalitha -
What is the spool, what is its role in background job scheduling
Hi,
I want to know what is meant by Spool request and spool number generated.
Tell about transaction SP01.
How it is linked to Background job scheduling.
thanks.
sam.Hi,
Refer this link.
https://www.sdn.sap.com/irj/sdn/inf?rid=/library/uuid/7a5f4061-0a01-0010-c9bc-a4e4cb100438
About SP01.
Printing does not work in SAP. There is a printer definition for your local printer, but it does not work. Presuming that you use the program SAPLPD on your computer.
Boot your computer and start only the SAPLogon and the SAPLpd program.
Delete all of your old print jobs in the SAP system (Transaction SP01).Generate only one new print job.
Check that there is enough resource in your computer. Check the free memory (Win 3.1x) and the free disk space (The lists are temporarily saved on your disk).
Open the SAPLPD and read the print log in the window. The printer definition must correspond with the parameters shown here.
Check that the standard printer is on the same lpt (Win 3.1: Control panel, Printer) as defined for the printer (usually lpt1).
In Transaction SP01 read the protocol of your print job. Do not generate new print jobs! Wait till the SAP system changes the status of the print job.
If you can not find the print job in SP01 anymore, then the print job was successfully printed out. If it didn't come out on your printer and the SAPLpd didn't indicate an incoming print job, then the connection was realised with another PC. Then SAP printer definition you used, does not correspond with your computer.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to u201CSend to SAP spooler Only for nowu201D
b. Name u2013 abbreviated name to identify the job output
c. Title u2013 free form description for the report output
d. Authorization u2013 a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department u2013 set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period u2013 set to u201CDo not deleteu201D if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobu2019s output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks u201CParametersu201D button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
u201CScheduling background jobsu201D section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of u201CScheduling background jobsu201D section).
Access to reportu2019s output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking u201CFurther selection
criteriau2026u201D button (e.g. to bring u201CSpool request name (suffix 2)u201D field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobu2019s outputs)
a. Spool request name (suffix 2) u2013 corresponds to a spool name in p. 3.b in
u201CScheduling background jobsu201D section above).
b. Date created u2013 to find an output of a job that ran within a certain date range.
c. Title u2013 corresponds to spool Title in p. 3.c in u201CScheduling background jobsu201D
section above).
d. Department - corresponds to spool Department in p. 3.e in u201CScheduling
background jobsu201D section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the u201CPrint with changed attributedu201D button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the u201CDisplay contentsu201D button to preview the spool request contents. A
Print and Download functions are available from the preview mode.
Exporting the Contents of a Spool Request
Use
You want to export the contents of a spool request as a text file to the SAP GUI working directory or to a directory of your choice. The content of the spool request is downloaded as plain text without, for example, graphics, images, or specific fonts.
The following procedures are irrelevant for the PDF-based form printing integrated as of SAP Web Application Server 6.40, since the print data can be opened and stored as a PDF. See also Displaying and Printing PDF-Based Forms.
Procedure
Exporting to the SAP GUI Working Directory:
Choose Spool Request ® Forward® Export as Text.
The entire text is stored in your SAP GUI working directory in ASCII format.
A file of this type is named using the following pattern:
.txt
Example: ABC0000004327.txt
You require appropriate authorization for this function.
Exporting to a Directory of Your Choice:
With this method of exporting a spool request, the content of the spool request is first displayed and you then download the screen list as a text file to the directory of your choice.
1. Select the spool request to be exported and choose Display Contents.
2. In the case of SAPScript/Smart Forms documents, activate list display by choosing Goto.
3. Choose System ® List ® Save ® Local File.
4. Choose one of the available formats and confirm your choice.
5. Choose a directory and save the spool request.
By default, only the first 10 pages of a spool request are saved in a file. You can increase the number of pages to be saved by choosing Goto ® Display Requests ® Settings and making the desired entries in the Display Area group box. -
Create, write, and close the Spool
Hello everybody,
I have a problem with the spool in one program i have to develop.
In the same program I have to create different lists and transform them into pdf to send by mail. The issue I am facing is to create different entries in the spool with the different lists. I read something about the function Get_print_parameters, but what I need is to open the spool, then write into this spool and close it, because afterwards I will send the email with this attachement. i have to do this several times.
Does anybody know how to do this opening writing and closing??
Regards, and thanks very much
CaletrioYou may use these FMs
RSPO_OPEN_SPOOLREQUEST
RSPO_WRITE_SPOOLREQUEST
RSPO_CLOSE_SPOOLREQUEST
P.S. Please search the forum before posting the query. -
How to get the number of rows written to the header of the spool file.
Hi
I need to create a header line for the spool file .
the header line should include fixed length values .
The header should include the number of records found in the table with a maximum begin date (begin_date is the column of the table)
To get the header in the spool file , i wrote a select query has :-
--SPOOL 'C:\Documents and Settings\abc\Desktop\output.TXT'
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000') ||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) ||
rpad(' ',76,' ')
from dad.school
group by sysdate;
SPOOL OFF
which gets me all the rows in the table , but i only want the rows with the latest school_begin_date .
how can i achieve that ...
I know that a subquery should be written in the from clause to get the number of rows found with a maximum school_begin_date.
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000') ||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) ||
rpad(' ',76,' ')
from dad.school where
select rownum from dad.school
where school_begin_date = max(school_begin_date) ;
the error i get is
ORA-00934: group function is not allowed here
I NEED HELP ..IN GETTING THE ROWNUM JUST FOR THE LATEST BEGIN_DATE ?
PLS HELP ME IN WRITING THE QUERY .
THANKS IN ADVANCE .Try this:
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000')||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) || rpad(' ',76,' ')
from dad.school
where school_begin_date = (select max(school_begin_date)
from dad.school); -
How to spool the output of mod pl/sql ?
I am trying to generate a HTML (will be static after I generate) web page from Oracle PL/SQL package. Moment I execute the package/procedure call, it should generate a HTML file and we will be publishing the file over the web.
create or replace procedure display_hello
IS
begin
htp.htmlOpen;
htp.print('Hello World');
htp.htmlClose;
end display_hello;
If I execute the above procedure using PL/SQL Developer, I am able to see the output in the neat HTML fashion. I would like to spool the HTML file used to display that and store it in a file so that i can publish it.
Any thoughts ?vaibhav468 wrote:
Because we dont want to spoil the performance. Assume our data is not going to change frequently. Say its going to change only once in three days. I dont want people to query the data from the database each time when they open the page. I would like them to just use the static content which i have generated. But the moment the data in my tables are going to get changed, I would run a process and regenerate the page. Not a bad idea ?You can use page caching in mod_psql - have not used it myself, but recall discussions on comp.databases.oracle.server some years ago.
APEX also sports a cache feature - this is also worthwhile investigating.
What is a horrible idea though IMO, is to try and roll your own caching - but having PL/SQL code writing physical files to disk for the web server to serve up and at other times creating and streaming content dynamically from PL/SQL code.
You also need to ask yourself about the actual benefits you will get from caching - and whether that is worthwhile the saving in resources.
PL/SQL and SQL can be very fast.. with minimal overheads. And this is typically the code that you want to deploy for a web server (as web users expect fast response - a web page should be generated in around 2 secs). In which case it does not matter whether PL/SQL dynamically creates the web page or whether it is provided from a cache - where there is also the overheads of cache logic to consider. -
Problem printing more than 255 characters in report output and in the spool
Hi Guys,
I am trying to print one file in the report output and in the spool but it's priting till 255 characters only. If I try the samething while writing in application server and in peresentation server it is printing full content. I am giving the line size in the REPORT statement as more than 255 like 300 but even it is not printing. How can i print the full contents. Whether it is any basis related issue or in any settings can we do that. please advice.
Thanks in advance.If it is not showing in Spool, Basis people has to do some setting in SPAD Transaction.
-
hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck! -
To avoid writing database code in the front end
Hello,
I am working on a database application using 10g database as backend and dotnet as front end. I wish to execute only oracle stored procedure for all the select (to avoid hard parse and use of bind variable), DDL and DML operations; just to avoid writing database code in the front end. Can anyone please give me a little examples of :
1.Select query's output to be return as resultset by stored procedure.
2.DML example by stored procedure.
3.Any DDL example by stored procedure.
using scott.emp, so that i would just call the stored procedure, rather than giving select,DML and/or DDL commands in the front end. Even though i have read in the documentation, but a clear cut examples will help me to get into clear concept as well.
Thanks & Regards
Girish SharmaHi...
-->Select example
create or replace procedure get_emp(rc out sys_refcursor)
is
begin
open rc for select * from emp;
end;
-->DML example
create or replace procedure do_dml_emp(pempid in number,
pempname varchar2,
result out number)
is
begin
insert into emp(empid,empname) values(pempid,pempname) returning empid into result;
exception
when others then
result:=-1;
end;
-->DDL example
create or replace procedure ddl_emp(colname varchar2,
coltype varchar2,
result out number)
is
begin
result:=-1;
execute immediate 'alter table emp add column ' || colname || ' ' || coltype ;
result:=1;
end; -
Convert the spool to xls format and email through attachment to the user
Hi all,
When I execute a report in background, I get spool. I need to convert the spool to xls format and email through attachment to the user.The xls file should not be saved on local system.
If I use the Spool Recepient tab in SM37 it mails the spool list as .txt file to the mail receipient. But I need to send it as an .xls file.
Can any one help me on thisDid you get the solution? i have the same problem.
-
Print the job from the spool in batch mode
hi team,
i need a program that would accept the spool nmae and a printer destination......
so my user want the report to print on two different printers....Hi,
If the domain of these fields are of type SYTIME, then adding the fields like a numeric value should suffice. -
Print the job from the spool in abtch mode
I want to be able to print a job from the spool in batch mode. In other words a job currently exists that creates a report that currently goes to a printer.
The user wants the report to print on two different printers. This extra printer cannot be placed in the job, since SAP only allows one printer per output. What I would like is to find a SAP program that would accept a spool name and a printer destination. It necessary we can write a program that might execute a SAP function to do the same.
SP01, the spool transaction, does not easily adapt itself to batch execution. I donu2019t want to create a bdc session using it.Hi,
If the domain of these fields are of type SYTIME, then adding the fields like a numeric value should suffice. -
Not able to generate the spool from transaction cv02n .Kindly help,urgent..
Hi ALL,
I have a problem in transaction CV02N. Actually i am an ABAPER, but i need some help of PP Guys.
The requirement is as follows:-
The client says that they have uploaded a '.PS' file into the transaction cv02n.Here in the first screen they give doc, doc type,doc part, doc version. when clicked on enter it take us to second screen , where they enter the '.PS' file path under 'originals' , in the tab 'document data'. Later they goto transaction CO01 and release an order at the operation level and save it.
Then it generates a spool. Now if we goto SP01 and check the spool with the number generated during saving CO01. We will be getting the scripts and the '.PS' file separately in a different spool in the production system in 4.6. But in my new upgraded system(6.0), i am not able to view the '.PS' file in the output spool.It seems to me that, it is not getting generated. Pls suggest me, as it is a very urgent issue. Need to close it by today at 1.00pm.
Regards,
Manasa.Sdear friend,
there would be several reasons for that.
first, check out your Output Device (your user in SU01) - goto to tab Defaults and look at Spool Control.
did you tick the 'output immediately' checkbox?
Fix it if nessesary. Just in case run SPAD to check out your device.
second, check out the 'output' config for Document Management (because you use t-code CV02N).
also make sure that relevant output condition exists.
third, ask someone to do the same - another user with another output device. does he/she have the same problem?
and the last, try to find out the functional guy or documentation.
also ask your basis guy regarding the lost transports or any other issues...
do not worry, life is good.
good luck! -
Trying to generate the spool from at user command...
Hi Gurus,
The spool is not getting created in the foreground, I think I am missing something here, the code is below.
AT USER-COMMAND.
CASE sy-ucomm .
WHEN 'SEND'.
PERFORM get_cust_emails.
LOOP AT i_output.
READ TABLE i_mail INTO wa_mail WITH KEY kunnr = i_output-rcvprn. " rcvprn is customer number,
IF sy-subrc IS INITIAL.
IF wa_mail-smtp_addr IS NOT INITIAL. if the customer has an email then create the entry in i_output_mail.
i_output_mail = i_output.
APPEND i_output_mail.
CLEAR: i_output_mail.
DELETE i_output.
CLEAR: i_output.
ENDIF.
ENDIF.
ENDLOOP.
Setting the Print Parameter's for Portrait
PERFORM f_print_report. " form is below
SORT i_output_mail BY rcvprn belnr. "rcvprn is the customer number
PERFORM f_prepare_mail. " form is below
MESSAGE i307.
LEAVE LIST-PROCESSING.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
Subroutines provided below:
FORM f_print_report .
*Program name
DATA : l_prog_name TYPE sy-repid,
i_print TYPE slis_print_alv.
Local Constants
CONSTANTS: lc_vline TYPE c VALUE '|'.
l_prog_name = sy-repid.
CLEAR: i_events[], wa_events.
wa_events-name = c_top. "'TOP_OF_PAGE'.
wa_events-form = c_top.
APPEND wa_events TO i_events.
CONSTANTS: lc_prtr TYPE sypdest VALUE 'LP01',
lc_layout TYPE sypaart VALUE 'X_90_120',
lc_layout1 TYPE sypaart VALUE 'X_65_255',
lc_lines TYPE sylinsz VALUE '-120',
lc_lines1 TYPE sylinsz VALUE '-185',
lc_mode TYPE sycallr VALUE 'CURRENT'.
Get the print paramters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
destination = lc_prtr
immediately = space
new_list_id = c_x
layout = lc_layout
line_size = lc_lines
mode = lc_mode
no_dialog = c_x
report = sy-repid
user = sy-uname
suppress_shading = c_x
IMPORTING
out_parameters = i_pr_param
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
CLEAR: g_heading_completed."Indicator for print header
ENDFORM. "f_print_report
FORM f_prepare_mail .
LOOP AT i_output_mail.
l_flag_mail = 'X'.
CLEAR: l_flag.
WRITE: /08(1) c_vline, 10(09) i_output_mail-stapa1, 20(1) c_vline,21(10) i_output_mail-datum,
31(1) c_vline, 32(10) i_output_mail-belnr, 42(1) c_vline,43(15) i_output_mail-total,
58(1) c_vline, 59(15) i_output_mail-surcrg, 74(1) c_vline,75(05) i_output_mail-kperc,
80(1) c_vline, 81(15) i_output_mail-betrg, 96(1) c_vline,97(19) i_output_mail-summe,
116(1) c_vline,117(03) i_output_mail-curcy, 120(1) c_vline.
AT END OF rcvprn.
SUM.
ULINE /8(113).
WRITE: /8(1) c_vline.
FORMAT COLOR 3.
WRITE: 10(09) text-064, 20(01) c_vline, 21(10) space,
31(1) c_vline, 32(10) space, 42(01) c_vline, 43(15) i_output_mail-total,
58(1) c_vline, 59(15) i_output_mail-surcrg, 74(1) c_vline, 75(05) space,
80(1) c_vline, 81(15) i_output_mail-betrg, 96(1) c_vline, 97(19) i_output_mail-summe,
116(1) c_vline,117(03) space, 120(01) c_vline.
FORMAT COLOR OFF.
ULINE /8(113).
NEW-PAGE.
ENDAT.
AT END OF rcvprn.
i_pr_param-linsz = 1000.
NEW-PAGE PRINT ON PARAMETERS i_pr_param NO DIALOG.
NEW-PAGE PRINT OFF.
If spool number is obtained, generate PDF
IF sy-spono IS NOT INITIAL.
PERFORM f_generate_pdf.
*Send the PDF as mail attachement
PERFORM f_send_email.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " SEND_MAIL
Please check the code and suggest some changes.
Thanks,
Sukumar.Hi,
The data is getting printed incorrectly, I have coded as you have instructed. But the report output (not emailing) is getting printed ok. The code for that is as below.
FORM f_list_display .
LOOP AT i_output.
g_flag = c_x.
CLEAR: g_flag_mail.
WRITE: /08(1) c_vline, 10(09) i_output-stapa1, 20(1) c_vline,21(10) i_output-datum,
31(1) c_vline, 32(10) i_output-belnr, 42(1) c_vline,43(15) i_output-total,
58(1) c_vline, 59(15) i_output-surcrg, 74(1) c_vline,75(05) i_output-kperc,
80(1) c_vline, 81(15) i_output-betrg, 96(1) c_vline,97(19) i_output-summe,
116(1) c_vline,117(03) i_output-curcy, 120(1) c_vline,121(10) i_output-rcvprn.
AT END OF rcvprn.
SUM.
ULINE /8(113).
WRITE: /8(1) c_vline.
FORMAT COLOR 3.
WRITE: 10(09) text-064, 20(01) c_vline, 21(10) space,
31(1) c_vline, 32(10) space, 42(01) c_vline, 43(15) i_output-total,
58(1) c_vline, 59(15) i_output-surcrg, 74(1) c_vline, 75(05) space,
80(1) c_vline, 81(15) i_output-betrg, 96(1) c_vline, 97(19) i_output-summe,
116(1) c_vline,117(03) space, 120(01) c_vline.
FORMAT COLOR OFF.
ULINE /8(113).
NEW-PAGE.
ENDAT.
ENDLOOP.
ENDFORM. " F_LIST_DISPLAY
The code which you gave should work as the above code. The above code is for report output and our code is for sending mails to the customers separately, thus we are creating separate spools customer-wise.
Our code for emailing to customers seperately is below.
FORM f_prepare_mail .
LOOP AT i_output_mail.
At new rcvprn.
NEW-PAGE PRINT ON PARAMETERS i_pr_param NO DIALOG.
endat.
l_flag_mail = 'X'.
CLEAR: l_flag.
WRITE: /08(1) c_vline, 10(09) i_output_mail-stapa1, 20(1) c_vline,21(10) i_output_mail-datum,
31(1) c_vline, 32(10) i_output_mail-belnr, 42(1) c_vline,43(15) i_output_mail-total,
58(1) c_vline, 59(15) i_output_mail-surcrg, 74(1) c_vline,75(05) i_output_mail-kperc,
80(1) c_vline, 81(15) i_output_mail-betrg, 96(1) c_vline,97(19) i_output_mail-summe,
116(1) c_vline,117(03) i_output_mail-curcy, 120(1) c_vline.
AT END OF rcvprn.
SUM.
ULINE /8(113).
WRITE: /8(1) c_vline.
FORMAT COLOR 3.
WRITE: 10(09) text-064, 20(01) c_vline, 21(10) space,
31(1) c_vline, 32(10) space, 42(01) c_vline, 43(15) i_output_mail-total,
58(1) c_vline, 59(15) i_output_mail-surcrg, 74(1) c_vline, 75(05) space,
80(1) c_vline, 81(15) i_output_mail-betrg, 96(1) c_vline, 97(19) i_output_mail-summe,
116(1) c_vline,117(03) space, 120(01) c_vline.
FORMAT COLOR OFF.
ULINE /8(113).
NEW-PAGE.
ENDAT.
AT END OF rcvprn.
i_pr_param-linsz = 1000.
NEW-PAGE PRINT OFF.
If spool number is obtained, generate PDF
IF sy-spono IS NOT INITIAL.
PERFORM f_generate_pdf.
*Send the PDF as mail attachement
PERFORM f_send_email.
ENDIF.
ENDAT.
ENDLOOP.
ENDFORM. " SEND_MAIL
Let me know, what could be the error in our code which generates separate spools for customers.
Thanks in advance for the help.
Sukumar. -
How to Spool the Output of a Cursor to a Flat File?
I have a SQL script that contains a cursor in it. I'm having trouble with spooling the output of the cursor. Does anyone know of a way to do this?
Please post the error or problem that you are facing. SQL Script itself would be handy.
Maybe you are looking for
-
How do I get my widgets icon back on the dock?
Help. All of a sudden my icon for widgets (speedometer) disappeared from the dock. I can still get to it by pressing F12 but I can't find a way to get it back on the dock. Does anyone have a solution?
-
I have a late 2009 27in iMac with i7 processor getting colored dots on display
started getting colored dots on desktop could it be bad vidio card
-
Using Case statement to insert,update,delete the tables
Hi All, I have to check the databse , if it is developement then insert/update/delete values in tables; if it staging then insert/update/delete values in tables; if it is production then insert/update/delete values in tables; thers is function availa
-
"full acrobat search" issue....
When I do an "full acrobat search" from within Acrobat, I select a folder to search in that contains thousands of PDF OCRed files. When it completes my search, I get the message "search has skipped 313 files because they are corrupt" -- how do I know
-
Trial version, windows 7 user account control box comes up
Downloaded trial version of InDesign CS4 on Windows 7 64 bit OS system. I've also downloaded the most current update. Initial problem during installation of the program was that it wouldn't allow me to dowload all components, I think when I followed