Wrong business area assigned to the company code

Hi All ,
I am getting error " Wrong business area assigned to the company code  " while posting a document in F- 02
please advise

Dear Balasubramaniyan,
You can supress the field Business area field in Field status Groups.
For this follow the following steps
Please check TCode OBC4 for field status variants
> Goto G001 (General) Field status group
>Additional Account Assignment
> Click supress in front of business area.
In that case, F-02 will not even ask for business area.
Also check whether Business area FS is ticked in front of your company code in TCode OB65
You may also refer to the following thread
How to assign business area to company code?
I hope this solves your query.
Thanks & Regards
Saurabh
Edited by: Saurabh Khandelwal on Nov 8, 2011 1:53 PM

Similar Messages

  • Invalid Business Area in combination with company code

    Dear Expert,
    I have just created a new business area, however, when doing a posting against the new business area I got prompted an error message "Invalid Business Area 7000 with combination of company code 0001". Could anyone tell me what setting did I miss?
    Thank you

    Hi...
    As per your issue..i think your company is using validation for your   business area avoiding miss usage.
    In this case once created new business area you have to update new business area in GGB0 T.code at company code level
    So go to GGB0 and click on Financial accounting -> line item -> here select your company code and click on business area here enter your new business area and save it after that come back one step and select your company code go to Validation at menu bar select transport.
    I hope it will helps you and let me know if you have any doubts
    Regards
    vamsi

  • Reset the company code before changing chart of accounts

    i have created a new chart of accounts.
    when i m trying to assign to company code i m getting this error.
    i tried with OBR1 tcode also but still getting the error.
    how to solve this issue..
    thanks in advance.

    If you are just starting the company code, you may want to delete the company code and recreate it. Then give the new COA.  This may take some time, because if when you just create company code there are numerous tables that get updated. You may also want to check the company code.

  • The company code OMPL does not exist or has not been fully maintained

    hi friends i did in obyc setting also fi posting are happens but the think is mm posting are not happen and not able work on transation code-mmo1i seen  transation code:omsy but company code is not mantain properly this is happen in mm module please give hints where to customization please help friends i am on client please
    ok
    The company code OMPL does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code OMPL or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    u2022     Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    u2022     Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    u2022     Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.

    hi
    Try to maintain the settings in OMSY
    and check the posting periods for your company
    regards

  • SC ERROR : Enter the company code

    Hi,
    I am using ECC6 and SRM 7, Ext. Classic
    At the time of creation Shopping Cart with FREE TEXT an error comes that is Enter the company code .
    With Product ID all process runs fine.
    And in ECC6.0 all process runs fine.
    Please help me
    Sumit

    Hi Sumit ,
    ERROR : Enter the company code
    u2022     Go to PPOMA_BBP and look for Company which user in question is assigned;
    u2022     Check the "Function" tab and see the logical systems maintained there. You can have more than one;
    u2022     Now, check the affected user and go to "Extended Attributes" tab. Here, ensure that logical systems maintained in "Product Category" attribute are the same ones assigned to the company code (step 2).
    If this is correctly maintained, check the following steps:
    u2022     Go to SPRO transaction -> SAP Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category;
    u2022      you have to maintain entries for Product Category, Source System and Target System.
    Source and Target Systems should be maintained as local SRM system only if you have local scenario. If you have Classic or Extended Classic Scenarios, you have to maintain the ECC system ID in both fields (Source and Target).
    Logical system maintained in "Define Backend System for Product Category" should be the same as defined in Company Function tab in PPOMA_BBP.
    Thanks & Regards
    Pradeep Kumar Dondeti

  • Update BSEG with alternative G/L account after assigning it at company code

    Hello,
    I'm facing an issue concerning the update of BSEG and other tables.
    We have started to work in Production from January 2010 without alternative chart of accounts. So many posting till now.
    Now the company wants to set up the local chart of account for some legal requirement. I know that once we have put an alternative chart of account, we can not change the local G/L account before balance at 0.
    But in my case, the local chart of account was not assigned to the company code. So I can put what I want in the group G/L account as alternative account.
    The idea is to create a local chart of account, after all local G/L accounts related to the local chart of account and after assign the local chart of account to the company code.
    The problem is that for all historical items (january 2010 to June 2010) I don't have the local G/L account in BSEG and other tables (FI)...and I need it for reporting.
    Thanks for your help
    Edited by: Oneforh on Jun 18, 2010 10:15 AM

    Dear,
    Check: http://sap.ittoolbox.com/groups/technical-functional/sap-acct/copy-chart-of-accountsgl-accounts-1530253
    Re: change alternative chart of account
    Change of Chart of Accounts
    changing chart of accounts
    I prefer to create new GL with new chart of accounts and copy the old GL balances.. but practically I didnt come across these situation.
    Check.
    Regards,
    Syed Hussain.

  • The company code TEST does not exist or has not been fully maintained

    Dear Experts,
    I received the following message when I tried to create a material master from Plant Maintenance module (select view based on general plant data / storage 1).
    "The company code TEST does not exist or has not been fully maintained
    Message no. M3150
    Diagnosis
    You have entered either the company code TEST or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
    Procedure
    Ask your system administrator to configure the company code.
    Procedure for System Administration
    Carry out the following activities as required:
    Create the company code if it does not already exist.
    You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
    Make sure that a fiscal year variant is assigned to the company code.
    You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
    Configure the company code for materials management.
    You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.
    However, I've done all the above instructions, yet the message still appear.  what else should I check?
    regards,
    Abraham

    Hi,
    I've done that earlier..
    However, I've chosen the default plant 0001 instead of my own created plant, it works.  Then I tried to do it again, with my own plant, it works also..
    Anyway, thanks a lot.
    regards,
    Abraham

  • Can one business area be assigned to several company codes? how to do it?

    Can one business area be assigned to several company codes?
    what are the configurations?
    thanks

    Dear Humility,
    If, I am not wrong, Business Area is assigned to Company Code via Finance (i.e. NO Direct assignment, but can be used across company code). You can assign a business area to an org. object through the account assignment tab.
    Business areas are generally company-code independent. You can post to them from any company code. The Business area field shows up as an additional account assignment when posting to an account as long as the field is turned on in configuration. The field can be made a required entry during posting.
    If certain company codes are not active in specific business areas, you can use a validation to prevent postings to this business area from the company codes specified.
    Important Transactions, related to Business Area Configuration:
    OX03     Create Business Area
    OMJ7     assign Business Area to Plant / Valuation Area and Division
    OVF2     Org Unit: Sales Area - Business Area Determination rule
    OVF0     Org Unit: Business Area Determination rule
    OVF1     Sales Area - Business Area Determination rule Slsorg/DstCh
    Best Regards,
    Amit
    Note: Some Relevant Links:
    [Business Area|http://www.sap-img.com/zf003.htm]
    [SAP Business Area|http://www.saptechies.com/configure-the-sap-business-area/]
    [Validation of Business Area for Company Code|Re: Validation of Business Area for Company code;

  • "Check Business Area of the company code" error while posting stock

    Hi Experts,
    While posting stock to a storage location of a plant , the system is giving me the following error message :
    "Check Business Area of the company code" .
    Would highly appreciate if I could get some info for this error message and how to resolve the same.
    Thanks & regards
    Vikas Hali

    hi
    i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
    then post the stock
    regards
    vijay

  • Why is business area assignment to co.code, not required

    why is business area assignment to co.code, not required

    Hi
    You can define a business area in <b>OX03</b> (SPRO>Enterprise>Definition-->FI)
    And now if you want to assign this business area to your company code, you can do so in configuring the global parameters <b>OBY6</b>
    It all depends on how you want to assign your business area. You can also assign all the balance sheet accounts and P&L accounts to a business area.
    Well, in the configuration, business area field would have been optional in the field status group; thats why you might think that its not required.
    Hope you got a picture what I am trying to say; if not, explain us your exact problem, will be forwarding the right answer.
    Regards,
    NareN.

  • Wrong business area at the time of ML81n and Miro

    Hi exeprt
    In service PO, i have taken cost center 3000, in KS02 for 3000, business area is 3000.when i have did the Sevice sheet Acceptence(ML81) business area (1000) is picking wrong for the  GR/IR g/l. when i did the miro, in business area field i have given 3000, but when i am doing Miro simulation, against the G/R g/L business area (1000).
    check the same scenario in development is coming properly and patched is also the same on ll the cleint.
    I have check business area assignment in enterprise structure, okb9,
    Kinldy suggest what are the area to check.
    Regard
    Nabil

    Hi expert
    Thnx for the advisable suggestion, but i would like to know, y system will not  pick the business area of the cost center which is assign.
    Regard

  • Delete the Company Code assigned to Collection Segment

    Hi All
    I have accidentally assigned Company Code to wrong Collection Segment, I need to delete the Company Code from the segment.  System throws error -  Deletion of company codes not possible in released segment
    I had search in the forum and could not find the exact solution for that. Could anyone pls help to provide the solution for this?
    Thanks in advance
    Chandu

    Hi Mark,
    Though I completely agree with your point, what I wanted to say is that in case a company code has been wrongly assigned to a segment and the segment released, then we can no longer delete that company code from that segment.  Then in that case we have to create a new segment and then assign this company code in that segment.  In the collection profile, then we have to assign the new segment and remove the old segment.
    Actually this is kind of perplexing for me.  If we have been using the segment for some time and then later we add a company code by mistake to a wrong segment.  Then there should be a provision to delete the company code at least before any data is transferred from FI to collections management.  I am not aware of any other solution for this problem.  Your valuable comments please.
    Regards,
    Ravi

  • Std report T.Code to view the Employees those are assigned to the Project

    Dear Guru's,
                          We are assigning Employeeu2019s in u201CActivityu201D  u201CPersonal assignment Tabu201D, for these employees we are booking the u201CTime sheetu201D against u201CNetwork activityu201D. 
                   Are there is any standard report is available to view the Employees those are assigned to the Project. If it is available please provide the Transaction Code.
    Regards,
    Bhanu Prathap

    Hi
    Nitin is correct if there is no HR then it is difficult to set up resource planning based on workforce. Nitin is also correct in poinitng out that yu do not have to implement HR fully, just set up the personeel master data (HR Mini Master) with a basic set of data infotypes.
    If however you do not plan to set up HR ot the personnel master then you need to do creative thinking -  e.g. set up all your people as individual work centres and assign to activites - the work centre description can be the name of the person and the workcentre number can be the employee number - restrcitcions is the field length, etc - however the down side of all this is that standard reports with personnel number number will not suffice and you will have to do some work for your reporting - not major as the data is stored in SAP tables

  • How to Assigning the company code to the billing units from ecc to crm

    Hi,
    Iam doing the roll out project , i require the help.
    can any one suggest me how to assign the company code to the billing units from ecc to crm.
    Thanks
    Mustafa

    Hi Mustafa
    You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
    Best Regards
    Gavin

  • Change the company code in a sales-order

    Our client is working only with one sales org 1000 assigned to one company code 1000 but having 14 other company codes and also having different plants which are individually assinged to different company codes at the clients requirment and to only one sales organisation.
    While creating sales order in sales area (1000/10/10) system have picked 1000 company code in the sales order header table VBAK, based on this combination there are several SO's created in which  the company code picked is wrong. We need to update the sale order correctly with corresponding company code as per business requirment.
    Please suggest with a report or the process of update\ion of sales orders.
    Thank you in advence.
    Shravan.

    Shravan.
    This is not a SAP standard practice.
    So, you need to create a program to create another sales order (and choose a correct sales area).
    Leonardo Rocha

Maybe you are looking for