Wrong fileset size information on Oracle9i Database HP-UX Download?

Could it be, that there are wrong fileset size information at the HP-UX download page for Oracle 9i??
I found the information:
server_9201_hpunix64_disk1.cpio.gz (566,419,019 bytes)
server_9201_hpunix64_disk2.cpio.gz (648,282,885 bytes)
server_9201_hpunix64_disk3.cpio.gz (538,652,554 bytes)
server_9201_hpunix64_disk4.cpio.gz (37,595,939 bytes)
and my archives open but have different sizes.
regards,
Hans-Georg

HI
Yuo need ALL DISK to install
I installed this version and i didn't problems
good lock
mario

Similar Messages

Oracle Announces Oracle9i Database for IBM Linux/390

Hi Folks,
Check out the following URL for the announcement, which went out this morning (March 18, 2002 at 8:00am Eastern).
http://www.oracle.com/corporate/press/index.html?1270638.html
Also, we've had a report that the Oracle9i Database Developer's Release for Linux/390 works on TurboLinux. I'll post distribution version information when I've received it.
Barry

From reading the other messages in this forum I now know that I'm not alone.
I was lucky enough to get a valid download for 9.2 database for linux but it took
a number of tries. It would be helpful if there could be a number of published
mirror sites to try downloading from. Perhaps this is already implemented
transparently to the end user and it's just luck of the draw that you hit a mirror
that works...
However, I've been having problems downloading ora9ias for about 4 days now.
I'm probably making things worse for others because I've tried to download
disk 1 and 4 at least 3 times and keep getting files that are close to the stated
size but usually a few k bigger or smaller; then I get the invalid gzip file error
message from gunzip. I've tried downloading from IE 5.5, netscape (from both
windows and linux), trying various ways of downloading (holding shift, or right
clicking with save as) and still no luck.
I'll keep trying, but if anyone has any solutions please publish them to this forum.
thanks.

Wrong file size on Linux download page

Hello:
This is what the Linux Oracle 9iR2 server download page looks like:
Oracle9i Database Release 2 Enterprise/Standard Edition for Intel Linux <http://otn.oracle.com/images/white_spacer.gif> Download the Complete Files <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk1.cpio.gz (553,607,967 bytes) <--- WRONG!! <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk2.cpio.gz (588,817,480 bytes) <http://otn.oracle.com/images/bullets_and_symbols/red_arrow_bullet_35.gif> lnx_920_disk3.cpio.gz (442,135,815 bytes)
The problem has to do with the first file (lnx_920_disk1.cpio.gz).
The stated size (553,607,967 bytes) is WRONG.
I have downloaded those 3 files more than a dozen times, getting
files of varying sizes. After several weeks, I finally had 3 files
with consistent sizes. However, the file #1 produces an error
message from gunzip (unexpected end of file).
If Oracle Corporation claims to be a technology- and Internet-savvy
company, they should know that the best way to avoid problems like
the above is:
- offering an FTP (i.e. TCP-based) download option
- including the corresponding MD5SUM next to each file.
Everybody else (well, probably not Microsoft) is doing this.
Why not Oracle?
Thanks from a very frustrated sysadmin.
-Ramon F. Herrera

Hey mister Millaard,
I have problem because Premiere always use Mainconcept DV Pro codec when import file in my case.But I find solution:
From
C/Program Files/Adobe/Adobe Premiere Pro CS3/Plug-ins/en_US
I remove
ImporterMCDVCPRO file and now Premiere import avi files as MS-DV AVI.
Maybe this can help somebody else.
lestra

OC4J 9.0.3 (date 07/31) problem with the MDB-demo and Oracle9i-databases (v9.*)

Trying to get the supplied mdb-demo to work in the J2EE 1.3 certified version of OC4J 9.0.3 (from 07/31).
It works fine with the OJMS-provider in a Oracle 8i v8.1.7 database but not in a Oracle9i database.
I have now tried three possible versions of Oracle9i available from OTN and Metalink:
- v9.0.1.1
- v9.0.1.3.1
- v9.2.0.1
I have noted from the "known-issue-page" that the supported version is v9.0.1.3 with patch #2416054 applied. Unfortunately is that patch only available for Solaris as of today...
I all cases I get one and the same error message from the CartEJB - bean in OC4J:
CartEJB::send2Queue: begin; item=QueueqSNDQUE|Queue
CartEJB::send2Queue; Exception occurred: oracle.jms.AQjmsException: ORA-06550: l
ine 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'AQ$_JMS_ENQUEUE_BYTES_MESSAGE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
CartEJB::send2Queue: end
Is there some post-installation-step that I missed (e.g. copying som jar-fil from Oracle9i to OC4J...) or is there anything else I can do to get the supplied MDB demo working with Oracle9i?
Thanks in advance,
Magnus Larsson.

Ok...
Thanks for your help!
So I will stick with Oracle8i v8.1.7 until the patch is available on Windows...
Maybe I'll make a try with Linux also (thanks for noting me!), but probably will the Windows patch be available before I succeed with Oracle9i on Linux...
I will post a reply once I get the patch working on either Linux or Windows!
Regards,
Magnus.

How to connect to oracle9i database from Unix

Hi All,
How can i connect to remote oracle9i database(windows based) from Unix. I have following server information Server IP, Username , Userpassword , DataBase name.Do i need any other information to connect to server?
How can i connect database from Putty?
Do i need to install SQL on the Unix to connect to oracle server?
and which C/C++ API i have to use to access tables from the remote oracle server?
please help me i am new to oracle .
Thanks in advance.

Oracle generally uses a special set of software, commonly called the SQLNet or Oracle Networking, as a layer to provide a connection between the client and the database server.
In general terms,
- the client software (perhaps sqlplus, an application, ODBC) calls Oracle Networking on the client computer and says "please connect to database known as 'x'";
- Oracle Networking translates the request, often by looking up 'x' in the TNSNAMES.ORA file at the client side, to get the host name, the port the Oracle listener is waiting on, and the name of the database service to access;
- Oracle Networking contacts the computer on the required port. If the listener is there, the Oracle Networking client asks for a connection to the database service;
- The Listener (if it recognizes it) asks the database service for a 'server process';
- The database starts up a server process which grabs a network port and tells the listener which port was obtained;
- The listener tells Oracle Networking on the client which port to use;
- The client disconnects from the Listener, and reconnects at that port;
- The server process starts authentication and session initialization, after which we are good to go.
In answer to your questions:
1) How can i connect database from Putty?
That implies you want to telnet to the Windows box and run the client stuff locally on the Windows box. So that means you need to look at telnet or ssh documentation - this has nothing to do with Oracle.
2) Do i need to install SQL on the Unix to connect to oracle server?
Not really. It does mean you might want to install an Oracle CLIENT (see the download section of http://otn.oracle.com) which will initiate the sequence as above.
A different sort of client is SQL Developer, a Java-based GUI with it's own built-in Oracle Networking, that displays database stuff. That is also offered by Oracle at the same download page.
3) and which C/C++ API i have to use to access tables from the remote oracle server?
Oracle provides a C/C++ API as a pre-processor, called Pro*C. I suspect this si way beyond what you want right now.
4) please help me i am new to oracle .
Please, please, please, please, please ..... please .... purchase and read http://www.oreilly.com/catalog/oressentials3/

How to insert data type information to oracle database

Hi, there,
I want to insert date information to oracle database in a jsp page using JSTL. but always got wrong message:
javax.servlet.jsp.JspException:
INSERT INTO DATE_TEST
(date_default,date_short,date_medium)
values(?,?,?)
: Invalid column type
I don't know how to convert java date type to oracle date type or vice versa. the following is the source code(all the fields of DATE_DEFAULT,DATE_SHORT,DATE_MEDIUM are oracle date type. and even I want to insert d instead d1, I got the same wrong message)
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ page import="java.util.*" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
<%@ taglib prefix="fmt" uri="http://java.sun.com/jstl/fmt" %>
<%
Calendar now;
Calendar rightNow = Calendar.getInstance();
%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>
Hello World
</title>
</head>
<body>
<h2>
The current time is:
</h2>
<p>
<%= new java.util.Date() %></p>
<%
java.util.Date d=new java.util.Date();
java.sql.Date d1=new java.sql.Date(d.getYear(),d.getMonth(),d.getDate());
out.print(d1.toString());
%>
<sql:update>
INSERT INTO DATE_TEST
(DATE_DEFAULT,DATE_SHORT,DATE_MEDIUM)
VALUES(?,?,?)
<sql:dateParam value="${d}" type="date" />
<sql:dateParam value="${d}" type="date" />
<sql:dateParam value="${d}" type="date" />
</sql:update>
</body>
</html>
thank you very much for the great help!!

I don't have time to read thru all your code, but I hope this information will help you.
It depends on how the Oracle database was set up. Usually, the date format is something like this: '27-MAY-2003 22:10:00'. A quick check will be to run this SQL script in SQLPlus:
select sysdate from dual;
You have to convert the date from textbox or whatever to this exact Oracle format. Otherwise, Oracle will not accept it. It is very picky on that. I found the best way is to do the conversion inside the SQL statement. It makes life so much easier.
Hope this helps.

JSP and Sending User-entered information to MySQL Database

I am trying to send user information to my database that I created in MySQL. I made a DB java class, which basically handles my connection to the database, which I know works since I also use it to log into my site.
The problem is after I have entered my information that I want to add to one of my database tables, the site runs through, but never actually adds it to the database. It is probably my coding, but I'm not too sure.
Also, I want to display the information from my database on my site. I'm new at this so any information on how to do that would be great.
DB class
* DB.java
* Created on November 7, 2007
package guildbank;
import java.sql.*;
* @author citibob and alice
public class DB {
    public static final String url   = "jdbc:mysql://localhost/krichbank";
public static Connection
getDB()
throws SQLException
    try {
        Class.forName ("com.mysql.jdbc.Driver");
        System.out.println(" Loading the DB driver. ");
    } catch(Exception e) {
        e.printStackTrace(System.out);
        System.exit(-1);
    Connection con = DriverManager.getConnection( url, "katherine", "katherine");
    return con;
public static void
close(Connection con)
    try {
        con.close();
    } catch(Exception e) {}
public static String
getUserName(Connection con, Integer UserID)
    if (UserID == null) return "<null>";
    int userid = UserID.intValue();
        System.err.println(""+userid);
    PreparedStatement st = null;
    String ret = null;
    try {
        st = con.prepareStatement(
            " select name from users where userid = ?");
        st.setInt(1, userid);
        ResultSet rs = st.executeQuery();
        if (!rs.next()) ret = null;
        ret = rs.getString("name");
    } catch(SQLException e) {
    } finally {
        try { st.close(); } catch(SQLException e) {}
    return ret;
}Additem code
<%--
    Document   : addItem
    Created on : Dec 12, 2007, 6:41:38 AM
    Author     : Katherine
--%>
<%@ page import= "javax.servlet.http.*" %>
<%@ page import= "javax.servlet.*" %>
<%@ page import= "guildbank.*" %>
<%@ page import= "java.sql.*" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
        <title>Item Addition</title>
    </head>
        <body>
        <%
        Connection con = null;
        try {
            con = DB.getDB();
            PreparedStatement st = con.prepareStatement(
                "INSERT INTO items (i_type, i_name, i_quantity) values(\" + request.getParameter(\"itemType\") + \",\" + request.getParameter(\"itemName\"))");
            ResultSet rs = st.executeQuery();
        } catch (Exception e) { }
    finally { %>
        Item Added! Yay!
        [<a href="login.jsp">Log in</a>]
   <% }
        %>
    </body>
</html>
{code}

3: You are catching and ignoring any exceptions from running the SQL.
4: You are constructing a SQL string rather than using a prepared statement properly.
5: Your sql mentions three columns: type, name, quantity. You only supply type and name in the values section.
try {
            con = DB.getDB();
            // using prepared statement properly with ? instead of creating string values.
            PreparedStatement st = con.prepareStatement("INSERT INTO items (i_type, i_name, i_quantity) values(?,?,?)");
            // what happens if these parameters are not present?
            String itemType = request.getParameter("itemType");
            String itemName = request.getParameter("itemName");
            st.setString(1, itemType);
            st.setString(2, itemName);
            st.setString(3, ?????????);
            st.execute();
catch (Exception e) {
// Log or handle the exception
// this basic code write it to standard error
// should appear in the console, or in a log file somewhere
// helps a LOT when figuring out what is wrong
System.err.println("Error occurred " + e.getMessage());
e.printStackTrace();
}Cheers,
evnafets

Who can tell me how to install Oracle9i Database under redhat7.3

I want to install Oracle9i Database under redhat7.3,but fail,can you tell me how to install it.

You can set it at infopackage level.
Go to infopackage-> Scheduler menu-->Data S Default Size(something like this).
Inside this you have option to set size of datapackage.
Hope this helps.

Oracle9i Database Release 2 Enterprise for HP 9000 Series HP-UX

Is the "Oracle9i Database Release 2 Enterprise/Standard Edition for HP 9000 Series HP-UX" really
running only on HP-UX 64 bit. No chance on 32 bit?
Werner

Yes. Oracle's current platform strategy is:
Oracle Platform Roadmap:
Organizations are deploying Oracle's database, applications, application servers and development tools on a short list of systems that dominate the market. Beginning with the Oracle9i Database, Oracle9i Application Server, and E-Business Suite (Oracle Applications) 11i, the following operating systems will be supported:
HP Alpha OpenVMS(1)
HP Tru64 UNIX(2)
HP-UX(2)
IBM Linux/3901 & z/Linux(1)
IBM OS/3901 & z/OS(1)
IBM RS/6000 AIX(2)
Intel Based Server LINUX
Microsoft Windows 2000
Microsoft Windows NT for Intel
Solaris Operating System (SPARC)
(1) - For Oracle9i Database ONLY
(2) - 64-bit ONLY
Several Microsoft Windows clients are supported, including Microsoft Windows XP.
Oracle will continue to support the Oracle8i Database and current versions of all other products throughout their support life cycle on the operating systems where they were released, including 32-bit versions of Oracle running on HP-UX and IBM RS/6000 AIX systems. Additionally, Oracle will continue to provide 32-bit client library support through the life of the Oracle9i Database. In keeping with our normal product support life cycle process, customers will be informed of status changes to individual product versions currently supported.

Broken archive Oracle9i Database Release 2 Enterprise

Hi
I'm trying to install Oracle9 Release 2. So I downloaded all four files from http://otn.oracle.com/software/products/oracle9i/htdocs/hpsoft.html. Two of them are broken: server_9201_hpunix64_disk2.cpio.gz (648,282,885 bytes)and server_9201_hpunix64_disk3.cpio.gz (538,652,554 bytes).
Is it kind of early adoption feature?

Yes. Oracle's current platform strategy is:
Oracle Platform Roadmap:
Organizations are deploying Oracle's database, applications, application servers and development tools on a short list of systems that dominate the market. Beginning with the Oracle9i Database, Oracle9i Application Server, and E-Business Suite (Oracle Applications) 11i, the following operating systems will be supported:
HP Alpha OpenVMS(1)
HP Tru64 UNIX(2)
HP-UX(2)
IBM Linux/3901 & z/Linux(1)
IBM OS/3901 & z/OS(1)
IBM RS/6000 AIX(2)
Intel Based Server LINUX
Microsoft Windows 2000
Microsoft Windows NT for Intel
Solaris Operating System (SPARC)
(1) - For Oracle9i Database ONLY
(2) - 64-bit ONLY
Several Microsoft Windows clients are supported, including Microsoft Windows XP.
Oracle will continue to support the Oracle8i Database and current versions of all other products throughout their support life cycle on the operating systems where they were released, including 32-bit versions of Oracle running on HP-UX and IBM RS/6000 AIX systems. Additionally, Oracle will continue to provide 32-bit client library support through the life of the Oracle9i Database. In keeping with our normal product support life cycle process, customers will be informed of status changes to individual product versions currently supported.

Downloading Oracle9i Database Release 2 Enterprise/Standard/Personal Editio

Downloading Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP. I have Windows XP Media Edition on my home PC. The file sizes do not match the page and when I try to unzip I get the message it is not a valid archive.

If you read the Release notes for 9.2.0.3 for Win 2003, it says
"Releases prior to the 9.2.0.3.0 patch set are not certified on Windows Server 2003".
You'll avoid known and maybe some unknown problems with it, so just install 9.2.0.1 and then apply 9.2.0.3 patch set and be happy :)
9i downloads.

How to convert foxpro database to oracle9i database

hi,
i'm searching for solutions regarding to convert Foxpro database to oracle9i database.if it is possible pls give information regrading this topic.
hoping for help.
regrads
ramesh.

Hi Kashif
There is a tool which comes with Oracle 8.0.5 name "Microsft Access Tool Coverter to Oracle Database",
What u have to do simple 3 steps,
1-Just convert ur Foxpro dbfs to mdbs (Access Database) through "Microsft Access Tool Coverter to Oracle Database".
2-Then convert these mdbs (Access Database) to
Oracle datbase 8.0.5 through "Microsft Access Tool Coverter to Oracle Database".
3-Then Export ur users which is created automatically through the above tools during wizard and then import this user to Oracle 8i.
If u need further assistance then add me on MSN
[email protected]

Trying to display information already in database in a form

I am trying to get this to pull the current information in the database and display it in a form which can then be updated. The update function works fine, in fact everything works fine except it does not display the current information. It shows up as blank fields so to update all of the fields you have to type in the information for the fields you don't want to update also otherwise it clears what is in there.
<?php
$host=""; // Host name
$username=""; // Mysql username
$password=""; // Mysql password
$db_name=""; // Database name
$tbl_name=""; // Table name
// Connect to server and select databse.
mysql_connect("$host", "$username", "$password")or die("cannot connect");
mysql_select_db("$db_name")or die("cannot select DB");
if(isset($_POST['Submit'])){
$id=$_GET['client_contract_id'];
$query="SELECT client_name, client_address, client_city, client_state, client_zip_code, client_phone, contract_fee, contract_start_date, contract_end_date, contract_terms FROM client_contract WHERE client_contract_id='$id'";
$result=mysql_query($query);
$num=mysql_numrows($result);
$i=0;
while ($i < $num) {
$name=mysql_result($result,$i,"client_name");
$add=mysql_result($result,$i,"client_address");
$city=mysql_result($result,$i,"client_city");
$state=mysql_result($result,$i,"client_state");
$zipcode=mysql_result($result,$i,"client_zip_code");
$phone=mysql_result($result,$i,"client_phone");
$fee=mysql_result($result,$i,"contract_fee");
$start=mysql_result($result,$i,"contract_start_date");
$end=mysql_result($result,$i,"contract_end_date");
$terms=mysql_result($result,$i,"contract_terms");
++$i;
?>
    <form action="updateclient.php" method="post">
    <input type="hidden" name="u_client_contract_id" value="<? echo $id; ?>">
    <table>
    <tr><td>Name :</td>
    <td><input type="text" name="u_client_name" size="30" value='<?php echo ($name); ?>'></td></tr>
    <tr><td>Address :</td>
    <td><input type="text" name="u_client_address" size="30" value='<?php echo ($add); ?>'></td></tr>
    <tr><td>City :</td>
    <td><input type="text" name="u_client_city" size="30" value='<?php echo ($city); ?>'></td></tr>
    <tr><td>State :</td>
    <td><input type="text" name="u_client_state" size="30" value='<?php echo ($state); ?>'></td></tr>
    <tr><td>Zipcode :</td>
    <td><input type="text" name="u_client_zip_code" size="30" value='<?php echo ($zipcode); ?>'></td></tr>
    <tr><td>Phone :</td>
    <td><input type="text" name="u_client_phone" size="30" value='<?php echo ($phone); ?>'></td></tr>
    <tr><td>Contract Fee :</td>
    <td><input type="text" name="u_contract_fee" size="30" value='<?php echo ($fee); ?>' ></td></tr>
    <tr><td>Start Date :</td>
    <td><input type="date" name="u_contract_start_date" size="30" value='<?php echo ($start); ?>' ></td></tr>
    <tr><td>End Date :</td>
    <td><input type="date" name="u_contract_end_date" size="30" value='<?php echo ($end); ?>' ></td></tr>
    <tr><td>Terms :</td>
    <td><input type="text" name="u_contract_terms" size="50" value='<?php echo ($terms); ?>' ></td></tr></table>
    <p> <input type="Submit" value="Update"></html><html></form>

First your have:
$num=mysql_numrows($result);
When it should be:
$num=mysql_num_rows($result);
I dont understand the while loop if you are looking for one row? Why not just:
$row= mysql_fetch_assoc($query);
<td><input type="text" name="u_client_address" size="30" value='<?php echo(str_replace('"', '"', $row['city'])); ?>'></td></tr>
    <tr><td>City :</td>
Gary

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Report the size of all SharePoint Databases in a text file using PowerShell?

I am new to Powershell. please help me for following question with step by step process.
How to report the size of all SharePoint Databases in a text file using PowerShell?

Hi Paul,
Here is the changed script, which will also include the size for the Config DB.
Please let me know if it worked:
#Get SharePoint Content database sizes
Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$date = Get-Date -Format "dd-MM-yyyy"
#Variables that you can change to fit your environment
$TXTFile = "D:\Reports\SPContentDatabase_$date.txt"
$SMTPServer = "yourmailserver"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Content & Config Database size reports"
$emailBody = "Daily/Weekly/Monthly report on Content & Config databases"
$webapps = Get-SPWebApplication
$configDB = Get-SPDatabase | ?{$_.Name -eq ((Get-SPFarm).Name)}
$ConfigDBSize = [Math]::Round(($configDB.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "Config Database size: $($ConfigDBSize)GB"
Add-Content -Path $TXTFile -Value ""
foreach($webapp in $webapps)
$ContentDatabases = $webapp.ContentDatabases
Add-Content -Path $TXTFile -Value "Content databases for $($webapp.url)"
foreach($ContentDatabase in $ContentDatabases)
$ContentDatabaseSize = [Math]::Round(($ContentDatabase.disksizerequired/1GB),2)
Add-Content -Path $TXTFile -Value "- $($ContentDatabase.Name): $($ContentDatabaseSize)GB"
if(!($SMTPServer) -OR !($emailFrom) -OR !($emailTo))
Write-Host "No e-mail being sent, if you do want to send an e-mail, please enter the values for the following variables: $SMTPServer, $emailFrom and $emailTo."
else
Send-MailMessage -SmtpServer $SMTPServer -From $emailFrom -To $emailTo -Subject $subject -Body $emailBody -Attachment $TXTFile
Nico Martens - MCTS, MCITP
SharePoint 2010 Infrastructure Consultant / Trainer

Wrong fileset size information on Oracle9i Database HP-UX Download?

Similar Messages

Maybe you are looking for