Wrong Tax Code in Quotation
Hi All,
SAP uses condition type ( MWVS -input tax) as the basis of a calculation procedure- TAXAT, which enables integration between the MM and FI module.
Step 1:
Step Control CType Description From To
100 0 BASB Base Amount 0 0
110 0 MWAS Output Tax 100 0 MWS
120 0 MWVS Input tax 100 0 VST
125 0 YWVS Foreign Input tax 100 0 YST
140 0 MWVN Non-deduct.Input Tax 100 0 NAV
150 0 MWVZ Non-deduct.Input Tax 100 0 NVV
200 0 NLXA Acquisition Tax Cred 100 0 ESA
210 0 NLXV Acquisition Tax Deb. 100 0 ESE
Step 2:
Condition Record is created for Condition Type -MWVS Input tax based on Country/Tax Code .
Here we have different tax codes maintained for AT country.
Step 3:
Create RFQ(ME41) :
Create Quotation( ME47): Tax code is appearing automatically here.
This tax code is wrong and I would like to know from where does the tax code appear in Quotation .
Thanks In advance
Regards,
Payal Saxena
Hi,
Is the condition MWVS is maintained in both pricing and tax procedures?
For the tax code how you have maintained the condition record?Is it by transaction FTXP / FV11 or by MEK1?
I think you have maintained the condtion by MEK1 for the tax code instead of FTXP / FV11.
Remember it is a tax condition and should be defined in tax procedure.
This condtion record contains the tax code which is getting defaulted to RFQ.
Delete the condition record for MEK1.
Cheers,
Satish Purandare
Similar Messages
-
Hello Experts,
Whenever i create A/R Credit Memo from A/R Sales Invoice the tax code of A/R Sales Invoice gets wrongly copied to A/R Credit Memo always as Exempt tax code
Ex A/R Sales InVoice - Tax Code VAT 12.5
Copy to
A/R Credit Memo Tax Code Exempt
Version SAP B1 2007B PL14
Please Suggest
Quick reply will be helpfulHello Manish...
You are absolutely correct in that the AR Invoice Copy To Credit Memo function should be carrying all the information from the AR Invoice to the Credit Memo.
I suggest you write an SQL query to see how many incorrect AR Invoice and Credit Memo tax combinations you have and then contact your SAP Support for them to look...
Regards - Zal -
F.05 tagged to wrong tax code
Hi Gurus,
While running F.05, system posted tax code in one of the balance sheet acct is wrong. We're expecting the system to post tax code for revaluation on ac 5304xxxx as G8 or S8 . Pls advise where to make the changes?
Regards
CLHi,
The tax catergory is * (all tax types allowed).
Regards -
BP Download from R/3 with wrong Tax Codes
Dear Experts,
actually I face a problem, that during the Business Partner download from R/3 the BDoc runs on an error,because of the Tax_number_check. In oure R/3 they deactivated the Tax_number_check for BPs.
Now my question is,where can I change the message type of the Tax_number_check in CRM, so that the download will go on with a wrong TAX number,and just raise a message, not an exeption.
Can anybody please help me?
Thanks a lot
ChristianJR,
If I understood your question correctly, I have filters setup on the Customer_Main Object on the KNVV and KNVP tables on the CRM side. On the KNVP and KNVV tables I have filters set on VKORG and VTWEG fields as MSLI and 10. Could this be causing it..
Faz -
AP Credit Note picking wrong tax code
Dear All,
When I copy a AP credit memo from an AP Invoice, it is not picking the tax code of the invoice. The tax code column is not active as well. i suspect it is picking the suppliers tax group instead of the invoice from which it is copied. Please advice on how i can resolve this so that it picks the tax code of the invoice.
Kind Regards,
Monil.Hi Monil.....
Have you define the Tax Code Determination?
Or have you created any FMS into the credit note which leads to change the tax code?
Check once please.......
Regards,
Rahul -
Condition type maintained with wrong tax code
Hi,
Is there any possibility to change Tax code for a condition type,Invoice is created but no accounting document generated.
PradeepHi,
As accounting document is not generated during Invoice creation,on checking through VFX3 we get message as below,
No taxes on sales/purch.are allowed for account 701031 3750, SJ is not allowed.
Once we get into FS00,for the company code 3750 and for the G/L 701031,we make tax category as " * ".
Now accounting document gets generated.
As this is not tax condition type and why should i maintain tax caegory as " * " for that G/l.
Pradeep -
Regarding Error in Tax Codes after Creation of Excise Invoice.
Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul KeshavThis query is now resolved
-
Error in Tax Code after Creation of Excise Invoice
Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul KeshavHi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS -
Tax code update in info record?
Hi, Gurus
a question, somebody knows if it is posible to update the tax code in info record update indicator?.
Info record was created automatically and the tax code was updated as in PO, by setting info update indicator in PO but every time when we enter the tax code in PO, It was not updating in info record.
Thanks in advance
RZThe Tax code in Info record gets created/ stored, only when the PIR is created very first time by the system. This field does not get updated even when the Update PIR has been checked in any subsequent PO.
The Tax-code field is set at the P.Org level, & is not at the plant level.
Hence it will create the issue,
if the plant considered in very 1st order is in different county (US) than the plant (country- Germeny) considered for the subsequent PO for the same material , vendor & P Org. As it will default the wrong tax code. Hence it is advisible NOT to maintain the tax code at PIR level.
Regards,
Samip Patil. -
Restrict changing the tax code in purchase order after goods receipt.
Hi,
Po is created with tax code x1.
Gr is done for partial quantity.
IR is still pending.
User has changed the tax code to x2.
This case we want to restrict the tax code change in PO after goods receipt.
Please advice.
Regards
Ravi KumarHi Sumit,
Po created with wrong tax code x1.
Stores person has done the receipt and consumed the stock.
Now user has suddenly realised that tax code is wrong and changed the tax code in PO.
In IR we will use correct tax code and post the accounting entry.
Stock values will be adjusted properly. to stock ac if stock is there and to price diff ac if stock is consumed.
Point is user's are asking that how system is allowing to change the tax code after receipt.
Point to be attended is restrict the change of tax code by any means after Gr has happened.
what are the possibilities to restrict the change of tax code.
Regards
Ravi Kumar -
Business Place - Tax Code Combination
Hi,
I need to get tax code automatically when i enter the Business Place in FB70 transaction code. Is it possible thru Substitution?
If not possible can i get it done thru validation atleast to prevent wrong tax code for business place combination?
Please advise me by giving some logic..
Thanks
YadayyaHi,
in OBBH you will find exit like U300 which call the program RGGBS000
Copy RGGBS000 to ZGGBS002 and change the relevant entry in TABLE T80D to ZGGBS002.
Take the help of ABAP Consultant for creating the Z of it.
Regards,
Shayam -
Wrong Vendor Invoice Posting Due To Wrong Excise Tax Code
Hi:
We have created a Purchase Order as per below:
Qty 10
Price 100
Value 1000
Excsie 10% 0
Cess 0
SECess 0
Value+Excise 1000
VAT 5% 50
ValueExciseVAT 1050
(Please note that the PO was to be created in the following fashion as the Material was excisable)
Qty 10
Price 100
Value 1000
Excsie 10% 100
Cess 2
SECess 1
Value+Excise 1103
VAT 5% 55.15
ValueExciseVAT 1158.15
We did the Goods Receipt and the FI Document is as follows:
24340000 Paper Stock BSX 1,000.00
13110100 GR/IR-ext proc WRX 1,000.00-
We did the Vendor Invoice Posting as follows:
100183 SIEGWERK INDIA PVT LTD (SICPA) KBS 1,050.00-
13110100 GR/IR-ext proc WRX 1,000.00
24638100 VAT Recoverable JP5 50.00
The Material was issued to Cost Centre
Later at the time of Excise Invoice posting, we came to know that the Tax Code in the Purchase Order was wrong. Here in our case, we have created separate Tax Code based on Excise Percentage. For example, V1 for VAT 5%, E1 for VAT %+Excise 10.3%.
To post the excise invoice, we changed the Tax Code in the Purchase Order and did the Excise Posting as follows:
24820020 CENVAT Inp SHEcess 1.00
24820000 CENVAT Inp BED 100.00
24820010 CENVAT InpEcess 2.00
13113920 CENVAT clearing 103.00-
My Question:
a. Is this the correct way?
b. What about the following FI Entries which got generated when we do the MIRO with actual Tax Code:
100183 SIEGWERK INDIA PVT LTD (SICPA) KBS 1,158.15-
13110100 GR/IR-ext proc WRX 1,000.00
13113920 CENVAT clearing JI1 100.00
13113920 CENVAT clearing VS9 2.00
13113920 CENVAT clearing JI6 1.00
24638100 VAT Recoverable JP5 55.15
Please guide.
Regards,Thanks Sanjoo for the reply.
Here my worry is the all the postings have been made in SAP in Production Client.
The User has already done the postings for MIRO & J1IEX without informing to us, and the volume of transactions is huge.
We are in the back-log mode and at this stage, we can't go for any reversal . I am Just exploring the alternatives.
Our MM & FI Users are little bit smart, when ever they do some mistake, they simply say "we will pass a JV" and we are not able to educate them that the JV is not a Solution. Please guide.
Regards,
PK -
Wrong postings of TAX CODES FOR FI invoices
Dear Friends,
I need to create Both Input tax codes an Output Tax codes purely for FI transactions need to be posted in Cash Journal and via Fb60 and FB70 postings.
I have created new Tax codes Specifically for FI and assigned the same in Fv11 for respective Condition type, but when they are using the same systm calculates wrong amounts as below
Invoice amount = 10000.00, Created Output Tax Code "o1" with 2% then actual Tax amount should be 200, But where as my system calculates 196.08. when i find in the system calculates only 196.08, when i posted the same i have checked system calculates as below (Amount 10000.00 - Tax amount 196.08 = 9,803.92), Sytem calculates the taxes on 9803.92*2 % = 196.08.
We need the taxes should calculated should be 200 instead of 196.08.
Can any body guide me
Regards,
Sandeep JainHi Sandeep,
Go to FB00 and you will find an option to calculate taxes on net amount or gross amount. Select or remove the "tick" as the case might be.
Thanks and Regards
Anit -
Taxes display wrong in Tax Code while create PO
hi all
i m facing the problem while creating PO with 4 line items. out of 3 not having any exise duty in J1ID. the user is giving taxcode for all line items. But it is showing the values of taxes Eduty 16%, Ecess 3% and Vatt 4% for all items in PO not in the PRINT. can any give the solution.Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards, -
Tax code BW does not appear in any G/L account item
Hi Gurus,
I have a requirement with Brazil client, they have got two types of taxes (PIS and COFINS) For which I created 2 tax codes BW & BX (with 100% & 100%). I created two tax conditoins ZPIS & ZCOF with access sequence MWST. I assigned tax codes to each one of those condition types.
I processed the entire cycle right from quotation to commercial invoice. But while releasing document for accounting in VF02, I am getting the above error. I have checked all configuration settings in SD and also in FI. But I could not found the solutions anywhere. I checked in all postings but thats also fruitless.
Could anyone of you have got this error and if you know the solution, then your response to this post will be high appreciated.
Thanks in advance.
LaksNot sure why you have maintained 100% for both the tax codes. I am also not sure, where you have maintained this percent. Is it in FTXP ?? As you should be aware, all tax codes would be created in FTXP with respective tax percentage like 4% for one tax code and 12.50% for other tax code.
thanks
G. Lakshmipathi
Maybe you are looking for
-
Firefox hangs on startup in normal mode and safe mode, won't start in reset mode
using FF 26.0 using windows 7 home premium v 6.1 (latest) My problems started after loading FF 26.0. If I start FF in regular mode it hangs. Same thing happens when I start in safe mode. I can shut FF down (while it is hung) by clicking the X in the
-
Macbook Pro purchased December 2014.....was fine until update iOS to Yosemite 2 days ago. Now, when turned on my image with my name comes up on the screen...no place to put your password.....at the bottom...restart, but used cursor to click on the r
-
Mail merge in PAGES and NUMBERS has GONE!
A while ago I painstakingly moved data and documents from Microsoft Excel 2008 for Mac to Numbers and from Word to Pages. I have been using Numbers for data lists and Pages for Mailmerge documents successfully since 2011. With the latest "update" to
-
How can I boost WiFi reception of my iPod Touch?
I recently purchased an iPod Touch to use solely with the Square credit card app. Unfortunately, at the location where I need to use it the most, I can received a WiFi connection even though I know there are some. Is there any thing that will boost W
-
I would like to know how to sincronize my IPhone 4 with a new computer. Thank you