Wrt54g can't upload with l2tp
Hello,
I wish to report to linksys something I have found:
Using wrt54g, the European hardware version 7.0 with firmware 7.0.4, when using L2TP – none of the computers behind the router can upload files to the internet.
Minor activity like browsing the internet is fine, but trying to send out larger files (even just a few Megs), via email or ftp/http upload – is one of the two:
Not possible at all.
With email, sometimes the files are actually sent, but the SMTP connection is not closed at the end so the delivery as a transaction fails and the email remains in the outbox.
Please fix this ASAP.
Thanks.
Regards,
Eitan Caspi
Israel
Thanks, but it didn't help. I tried MTU (which is very low at 1420), and port forwarding is not relevant.
I did a simple test – I set the wrt54g to use DHCP with my cable company, and then used the windows XP l2tp dialer from my computers. They both started to work like charm! Without any changes of MTU or port forwarding…
Regards,
Eitan Caspi
Israel
Similar Messages
-
WRT54G can't communicate with DNS server
Hi there! So, I've got a strange and frustrating problem with my internet. We've got Comcast, and we have several computers connected through a linksys WRT54G router (through a motorola surfboard modem). Yesterday, our house briefly lost power. Upon regaining power, the internet wasn't working anymore. It was strange because both the modem and the router indicated that they were connected just fine, but, on all the computers, the network was listed as "local only" and couldn't connect. I tried directly connecting the modem to a computer, and that worked (but only after power cycling the modem once it was connected).
When attempting to diagnose/repair the connection when connected through the router, I get a "Could not communicate with the primary DNS server" message. Does anyone have any idea what could be causing this problem? Could the power getting knocked out have messed something up with the router? As of now, we can only have one computer connected at a time through the modem. The only way I'm connected right now on my computer is through tethering my phone.
Thanks in advance for your help!
oh, and I don't know if this is important or not, but we aren't actually using the wifi much at all. All the computers connect through ethernet cables. I did try wifi, though, and it still didn't work.The power interruption probably messed up your router settings. Happened to my WRT54G a lot of times.
Just reset and powercycle the router by holding the reset button for 30 seconds, waiting for another 30 seconds then unplug the power cord for 10 seconds before replugging it back. Try to access the admin page through http://192.168.1.1 and reconfigure from scratch. This should get you back online.
If that doesn't work, try upgrading / re-flashing the firmware then go through the same reset - cycle - reconfigure from scratch process as above. -
How can i upload with facebook using N2690
I want 2 upload to facebook using N2690
Hey Goldfishy86,
What kind of media files are you looking to upload onto facebook?
You could try log into the Facebook website on your device browser and log into your Facebook and view the original website not the mobile version, from there try to upload your media.
If it does not work and you are still looking to upload your videos to Facebook I suggest downloading Nokia PC Suite and transferring your videos to your PC and uploading it via your PC web browser.
I hope this helps, let me know if you manage to solve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
How many computers can I upgrade to Lion after purchase from the A store?
If you are referring to the USB Lion Flash installer or the App Store download, then you can install on all the computers you own.
-
Image upload with save to database
Quick question guys,
Can Image upload with save to database be added to an existing form in order to save other info as well as the file name to the database.
Thanks
Col FHi,
Not looking at any code you have an upload button for the video and an insert for the form. So both forms are independent of each other it looks like, thats why when you do one you only get that info and when you do the other you only get the other info. You should just make one form with the uploader included. Make one form with all the fields included (movie name, movie page, movie description, movie file) after the form is completed then select the file field and go to...
Server Behaivoirs, Developer Toolbox, File upload, upload file. Follow the widgets. -
I have the latest version 1.1 but i can't upload
I start my iBook with version 1.0 every thing is ok but now with 1.1 when i try to upload to iBookstore i see this message:
1 package(s) were not uploaded because they had problems:
/Volumes/Photo-Video/marocco/iBook/T_MAROCCO.itmsp - Error Messages:
Apple's web service operation was not successful
Unable to authenticate the package: T_MAROCCO.itmsp
ERROR ITMS-9000: "This book was created with iBooks Author 1.0. Multitouch books for iPad must be created with iBooks Author 1.1 or later in order to be submitted to the iBookstore. Update to the latest version of iBooks Author using the Mac App Store." at Book (MZItmspBookPackage)
I have the latest version 1.1 but i can't upload with iBook ProducerSave a new version of your book using iBooks Author 1.1 and try uploading it. Be sure to use the latest version of iTunes Producer (2.5.1) as well.
-
Can not upload my ipa with Apple Application Loader
After I published with success a new .ipa with DPS when I tried to upload with Application Loader, the system refused my app.
In the past I never had this problem since last week it is impossible until now.
When I asked help the Apple developer assistance, says:
The error you’re receiving now does make sense that it was caused by the Adobe DPS program. Sometimes when using 3rd party app builders it will cause a similar error when attempting to upload a new app or update.
Unfortunately Apple does not support 3rd party app builders, and I would suggest contacting the support group at Adobe in regards to DPS and what setting you need to adjust within the program to successfully upload the app.
When contacting them be sure to have the description of the error ready for them. I’ve seen this similar case with previous developers that have used the Adobe app builder, and have reached a resolution with contacting them.
What can I do?
Thank you in advance.
Silvia -
Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates < -
How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
-Mark -
How can you upload a movie to I tunes then sync with Ipad2?
how can you upload a movie to I tunes then sync with Ipad2?
There are several options to choose from its either you will buy directly from itunes which go directly to movie. Another option is that convert first your movie to mpeg4 by using any converter software, then after converted drga the file (movie) to itunes library. Next thing you will do is to click your account (your ipad device) then look movie tabs then check sync movies.
-
Want to travel only with my Ipad. Would like to easily upload, with one click, large 7GB folders of both Excel spreadsheets and Word documents to ICloud and then be able to view, change and create individual spreadsheets and documents using Numbers and Pages on my Ipad through the internet? Also, this would exceed the 5GB offered free, but someone said if I am only syncing and not backing up there would be no charge. Please explain.
You can't
Pages and Numbers can save to iCloud, Word and Excel can not. -
Can't upload photos to Flickr with Safari - Safari always crashes.
Help, I can't upload photos to Flickr with Safari. Safari always crashes and I recieve the following error message (and I've not included all of it just to keep it somewhat short):
Process: com.apple.WebKit.WebContent [673]
Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com. apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent
Identifier: com.apple.WebKit.WebContent
Version: 9537 (9537.74.9)
Build Info: WebKit2-7537074009000000~3
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Safari [155]
User ID: 501
Date/Time: 2014-03-17 22:17:24.605 -0500
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 782BB667-7908-403F-2F7A-8205C11B8B24
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008
VM Regions Near 0x8:
-->
__TEXT 000000010babf000-000000010bac0000 [ 4K] r-x/rwx SM=COW /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com. apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent
Application Specific Information:
Bundle controller class:
BrowserBundleController
Process Model:
Multiple Web Processes
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.WebKit2 0x00007fff922c9212 WebKit::SandboxExtension::consumePermanently() + 10
1 com.apple.WebKit2 0x00007fff92408c38 WebKit::WebPage::extendSandboxForFileFromOpenPanel(WebKit::SandboxExtension::Ha ndle const&) + 26
2 com.apple.WebKit2 0x00007fff9240da8b void CoreIPC::handleMessage<Messages::WebPage::ExtendSandboxForFileFromOpenPanel, WebKit::WebPage, void (WebKit::WebPage::*)(WebKit::SandboxExtension::Handle const&)>(CoreIPC::MessageDecoder&, WebKit::WebPage*, void (WebKit::WebPage::*)(WebKit::SandboxExtension::Handle const&)) + 80
3 com.apple.WebKit2 0x00007fff922db338 WebKit::WebPage::didReceiveWebPageMessage(CoreIPC::Connection*, CoreIPC::MessageDecoder&) + 6660
4 com.apple.WebKit2 0x00007fff922c3a6b CoreIPC::MessageReceiverMap::dispatchMessage(CoreIPC::Connection*, CoreIPC::MessageDecoder&) + 125
5 com.apple.WebKit2 0x00007fff922c3950 WebKit::WebProcess::didReceiveMessage(CoreIPC::Connection*, CoreIPC::MessageDecoder&) + 28
6 com.apple.WebKit2 0x00007fff922c38b9 CoreIPC::Connection::dispatchMessage(***::PassOwnPtr<CoreIPC::MessageDecoder>) + 101
7 com.apple.WebKit2 0x00007fff922c37e2 CoreIPC::Connection::dispatchOneMessage() + 106
8 com.apple.WebCore 0x00007fff8eefe34e WebCore::RunLoop::performWork() + 270
9 com.apple.WebCore 0x00007fff8eefe222 WebCore::RunLoop::performWork(void*) + 34
10 com.apple.CoreFoundation 0x00007fff8db9e731 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 17
11 com.apple.CoreFoundation 0x00007fff8db8fea2 __CFRunLoopDoSources0 + 242
12 com.apple.CoreFoundation 0x00007fff8db8f62f __CFRunLoopRun + 831
13 com.apple.CoreFoundation 0x00007fff8db8f0b5 CFRunLoopRunSpecific + 309
14 com.apple.HIToolbox 0x00007fff93de1a0d RunCurrentEventLoopInMode + 226
15 com.apple.HIToolbox 0x00007fff93de17b7 ReceiveNextEventCommon + 479
16 com.apple.HIToolbox 0x00007fff93de15bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
17 com.apple.AppKit 0x00007fff8b00b3de _DPSNextEvent + 1434
18 com.apple.AppKit 0x00007fff8b00aa2b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
19 com.apple.AppKit 0x00007fff8affeb2c -[NSApplication run] + 553
20 com.apple.AppKit 0x00007fff8afe9913 NSApplicationMain + 940
21 com.apple.XPCService 0x00007fff96086c0f _xpc_main + 385
22 libxpc.dylib 0x00007fff8c819bde xpc_main + 399
23 com.apple.WebKit.WebContent 0x000000010babfba0 0x10babf000 + 2976
24 libdyld.dylib 0x00007fff959895fd start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8c8c8662 kevent64 + 10
1 libdispatch.dylib 0x00007fff96fe643d _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff96fe6152 _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib 0x00007fff8c8c3a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8c8c2d18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8db90155 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8db8f779 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8db8f0b5 CFRunLoopRunSpecific + 309
5 com.apple.AppKit 0x00007fff8b1ab16e _NSEventThread + 144
6 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
7 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
8 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 3:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff8c8c3a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8c8c2d18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8db90155 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8db8f779 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8db8f0b5 CFRunLoopRunSpecific + 309
5 com.apple.Foundation 0x00007fff946b0967 +[NSURLConnection(Loader) _resourceLoadLoop:] + 348
6 com.apple.Foundation 0x00007fff946b076b __NSThread__main__ + 1318
7 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
8 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
9 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 4:: WebCore: Scrolling
0 libsystem_kernel.dylib 0x00007fff8c8c3a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8c8c2d18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8db90155 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8db8f779 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8db8f0b5 CFRunLoopRunSpecific + 309
5 com.apple.CoreFoundation 0x00007fff8dc44811 CFRunLoopRun + 97
6 com.apple.WebCore 0x00007fff8efaad44 WebCore::ScrollingThread::initializeRunLoop() + 244
7 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
8 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
9 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
10 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 5:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a8369c5 JSC::BlockAllocator::blockFreeingThreadMain() + 261
3 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
4 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
5 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
6 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 6:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 7:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 8:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 9:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 10:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 11:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 12:
0 libsystem_kernel.dylib 0x00007fff8c8c7e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff95c7ef08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff95c81fb9 start_wqthread + 13
Thread 13:
0 libsystem_kernel.dylib 0x00007fff8c8c7e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff95c7ef08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff95c81fb9 start_wqthread + 13
Thread 14:: WebCore: Worker
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a836ddd ***::ThreadCondition::timedWait(***::Mutex&, double) + 61
3 com.apple.WebCore 0x00007fff8fbbe2cb ***::PassOwnPtr<WebCore::WorkerRunLoop::Task> ***::MessageQueue<WebCore::WorkerRunLoop::Task>::waitForMessageFilteredWithTime out<WebCore::ModePredicate const>(***::MessageQueueWaitResult&, WebCore::ModePredicate const&, double) + 187
4 com.apple.WebCore 0x00007fff8fbbdcf6 WebCore::WorkerRunLoop::runInMode(WebCore::WorkerContext*, WebCore::ModePredicate const&, WebCore::WorkerRunLoop::WaitMode) + 102
5 com.apple.WebCore 0x00007fff8fbbdc50 WebCore::WorkerRunLoop::run(WebCore::WorkerContext*) + 80
6 com.apple.WebCore 0x00007fff8fbc0f50 WebCore::WorkerThread::workerThread() + 624
7 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
8 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
9 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
10 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 15:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a8369c5 JSC::BlockAllocator::blockFreeingThreadMain() + 261
3 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
4 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
5 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
6 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 16:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 17:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 18:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 19:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 20:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 21:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8c8c7716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff95c7fc3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8a837437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8a8372c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8a82bc5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff95c7d899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff95c7d72a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff95c81fc9 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00007fff5413ef78 rbx: 0x0000000000000000 rcx: 0x00007fe085a2dcb8 rdx: 0x00007fe085a2dcb8
rdi: 0x0000000000000000 rsi: 0x00007fff5413ef90 rbp: 0x00007fff5413ef60 rsp: 0x00007fff5413ef50
r8: 0x0000000000000000 r9: 0x0000000000000190 r10: 0xfffffffffffffe91 r11: 0x00007fff7be09db8
r12: 0x000000011100b8c0 r13: 0x00007fff5413ef90 r14: 0x00007fff92408c1e r15: 0x0000000000000000
rip: 0x00007fff922c9212 rfl: 0x0000000000010246 cr2: 0x0000000000000008
Logical CPU: 6
Error Code: 0x00000004
Trap Number: 14
Binary Images:This procedure is a diagnostic test. It will make no changes to your system, and therefore will not, in itself, solve your problem.
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
sudo opensnoop -e 2>&- | sed -En '/ m[dt]/d;s/(\/Users\/)[^/]+/\1-/p;/ReportC/q' | tail -50 | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning not to screw up. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Now take the action that causes the crash.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.
You can then quit Terminal.
Important: There is an obscure bug in some versions of OS X that may cause cursor movement to lag or stutter after running the above command. If you notice this behavior, simply restart the computer to clear it. -
is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?
iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
How to Recover Photos from iPad
http://www.ipubsoft.com/idevice-tips/recover-deleted-photos-on-ipad-mini.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
Jihosoft Mobile Recovery for iOS
http://www.fonerecovery.com/iphone-data-recovery.html
Cheers, Tom -
I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu
It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook? -
Can anyone help with uploading photos from iPad to Facebook. Thanks
Can anyone help with uploading photos fom iPad to Facebook? Thanks
What app are you to trying to use ? You can't upload photos to Facebook via Safari, but a number of the Facebook apps support it e.g. the 'official' app : http://itunes.apple.com/us/app/facebook/id284882215?mt=8 (thought it's optimised for the iPhone/iPod Touch it does support uploading photos), Friendly For Facebook (http://itunes.apple.com/us/app/friendly-for-facebook/id400169658?mt=8)
Maybe you are looking for
-
TCP Timeouts in Native Windows 7 64-bit (wired and wireless)
I am having some major headaches with this new laptop in regards to network stability. I have a W510 4318CTO with the Ultimate-N 6300 AGN adapter. Here is what I'm seeing: Prior to installing Virtual PC/XP Mode, whenever I am browsing the web or ac
-
And adobe core sync error message as well.
-
ESLL missinu00B4 fields in SAP ECC 6.0
Hi, friends! I have the following issue. Could anyone tell me why in SAP ECC 6.0 the table ESLL has less fields than in SAP ECC 5.0? The point is that, in SAP 6.0, there are function modules that references some of those missing fields and get dump a
-
hi everybody, i am working with the teststand API und C#, and i have following problem: i wrote a programm that automatically create a sequence , and insert a container as Parameter in this sequence. The problem is that i can't access the elements of
-
My Iphone 3GS can no longer get ESPN And CBS Sports Podcasts. They only let me place reviews of the podcasts. This happened a week ago. Does anyone know what happened and if there is anything I can do to fix it?