WRT54G connectivity issues (ram problem?)

I've done everything I can to try and figure out what is wrong, but unfortunately, all I've been able to do is narrow down the problem with something internal with the router.
WRT54G v3.1 Firmware Version: v4.21.1
RCA Cable Modem
TimeWarner Road Runner Cable Service ~6mbps
This is at my parents house, so I'm not actually around all the time, but it happened earlier this afternoon. The router will respond to pings, wireless signal is ok, the router pages load, I can change all settings. But from any computer behind the router, I cannot access anything outside, nothing makes it past the router. Unfortunately, I don't have anything I could put between the router and modem to sniff what kinda traffic is going between the two.
The same things happen regardless of wired or wireless.
I've tried sniffing traffic, doing pings and nslookup and tracert and such, and the router responds, but nothing after that. If I go into the router diagnostics page, I can do tracerts and pings from there, and everything seems to respond fine (gateway, dns servers, google.com, etc).
Power cycling the router doesn't work, and neither does resetting the modem (and any combination thereof). The only thing that seems to work is resetting the router completely with the button on the back (which of course resets all settings and I have to change them back, which is a pain, and has thus caused my family to leave the router wide open with factory default settings.
I'm considering custom firmware... I know my way around linux, I'd say my level is intermediate, so I'm not too concerned about that, but my family doesn't, so I'm not really sure what firmware I should use.
Thanks for reading my long post, hope someone can help!
Edit: Reason I suggest problems with RAM because I've read in various places that the router keeps connection history for a long time, and the router tends to die when my family runs torrents, when the most number of connections are made. When it died today, no torrents were running, but there had been a larger than usual number of wireless clients because of thanksgiving break, and having guests over.
Message Edited by coreno on 11-23-2007 04:48 PM

Your WRT54G has 16 MB of RAM. Many of the newer WRT54G's have only 8 MB of RAM, and they seem to be more prone to the "torrents" problem, although it appears that any Linksys router can potentially have a torrents problem.
Obviously, the router should not work in the way you described. Perhaps the firmware has become corrupted. I would suggest that you re-download and reinstall the latest firmware for your router. After reinstalling the firmware, you will need to reset the router to factory defaults. If you saved a router configuration file, DO NOT use it.
After resetting the router to factory defaults, I would suggest that you simply connect it to your cable modem and see if the problem recurs while using all default settings. Also, during this test period, do not let anyone use "torrents" or any other P2P programs. Assuming that this corrects the problem, the next step would be to begin using torrents, and see if that alone will cause the problem.
Hope this helps.

Similar Messages

WRT54GS Connection issue

I have been using a WRT54GS without issue for the last 3 years. Two weeks ago a problem arose which stopped the router from opening new connections after some arbitrary amount of time. Thinking it was just an age issue i quickly went out and purchased the identical router only to hook it up and find an identical issue. The problem causes both wired and wireless connections to lose the ability to create new connections to the internet any old connections opened, for example an online radio station or an online game continue to work if they were opened before the issue arose, I can not however open new connections. After the second router proved useless i figured it must be my internet connection so i bypassed the router and hooked up my connection directly to the back of my computer, no issues. I have already updated the firmware of both devices to no avail, any advice or suggestions would be greatly appreciated after already wasting the $50 on the second WRT54GS and losing the receipt to return it i would prefer to avoid spending more money on a new router if possible, thanks.

Hard reset your router to factory settings and then re-configure it...To reset the linksys router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

WRT54G Connection Issues *Odd!*

Hey All,
Before I begin, I'll just say now that I do have some networking experience and have tried both 'Googling' and searching for an answer on my own. Ok, on to the problem.
Host Computer (Desktop): Windows XP 32-bit
Wireless PC (Desktop): Windows 7 32-bit
Router: WRT54G Firmware Version 8.00.8 build 001
ISP: Optimum Online (Cable)
Router to Wireless PC distance: approximately 15-20 feet, same floor. 2 Wooden doors between them.
Issue: The wireless PC (running a Netgear WPN311 Rangemax Adaptor) is having frequent connection drops and latency issues. I've upgraded the firmware, hard rebooted, changed the wireless channel, moved any objects emitting a frequency away, and reset all settings to scratch. I've deleted all wireless profiles off my PC (then added the correct one) and made sure to change the settings so it does NOT connect to a stronger signal network.
Now here's the odd part. About 80% of the time I get a drop or extremely low signal I notice the wireless PC picks up a phantom network with the name "linksys". The network has a poor, unsecured connection. Is it possible my router is emitting 2 SSID's?? I'm pretty frustrated with the drops as it (of course!) happens when I'm in a game or watching some online videos using significant bandwidth.
Any help would be appreciated..Thanks!

Set your SSID to something unique. Lower down the MTU. Increase the Beacon Interval found in Advanced Wireless sub-tab.

Camera raw issues - RAM problem?

Hi
Im using Photoshop 6 with when using ACR i find that the ability too zoom in and out in camera raw disappears if i apply any noise reduction (ie: luminance amount above 0). When this happens i also get "stuttering" when moving the image around in the window, with the bottom or top section of the image remainingand being replicated above or below while the middle of the moves.
Often i process a RAw image and it opens as a TIFF in photoshop and all seems fine, then if go back to ACR and try and process another RAW i find that the ACR page opens minus the image. In other words the ACR page is visible but the window where the image should be shows PS underneath. The only way to clear this is to close PS and reopen the program and the RAW file. I often get an error message when i try converting a RAW file to a developed tiff that says "not enough RAM".
My PC has 4GB of RAM and in the photoshop preferences (performance) the "ideal range" on my PC is around 900 - 1150MB. Is my PC too dated to run PS & ACR and do you think the issues ive explained are all to do with the limited RAM?
Mark

I am seeing this problem too. I have a similar specd PC to mjones1978 above : core i7 860, ATI Radeon HD4350, 32bit win 7 pro, 4GB RAM (2.96GB usable). I am opening RAW files from Mini Bridge to Camera Raw and I can get 2 sequential images loaded processed and then imported to PS6 as 16 bit saved and closed with no problem. I come to the 3rd RAW file, and as soon as it opens in Camera Raw, there is no working preview. When this happens, even if I just hit 'Open' to open it in PS6, it wont open. I can change the sliders in Camera Raw or clsoe file but nothing else.
The only way I can get around this is to completely close PS6/CR/BR down and re-open again.
I suspect that it may be something to do with memory and I have done a system monitor to see what's going on -
Available
RAM
Memory
1.8GB     - I have a few programes open before PS6
1.65GB   - PS+mini BR open
1.28GB   - PS+MBr+CR open
1.07GB   - PS+MBr+16BIT image file open in PS
1.07GB   - 16 BIT image file closed but PS and MB open
0.74GB   - PS+MBr+CR file open
0.98GB   - File Closed
0.77GB   - PS+MBr+CR file open { CR preview disappears and file is not openable in PS from CR)
Now it would appear that PS6 is hanging onto 1.65GB-0.98GB = 0.67GB of RAM memory that it never coughs up again. which on a 4GB 32 bit system is a sizable chunk.
I have tried playing around with giving PS6 more memory in preferences, purging PS6 cache (there is never anything highlighted to purge other than video cache after a file is closed), and also tried giving CR 10GB of cache disk space.
None of these options work.
For now it just leaves me closing PS6 all the time and then reopening every 2 images which is a bit frustrating.
This happens more suddenly with big (42MB) RAW files, but smaller ones (20MB) create the same problem too, but I maybe get a few more files processed before it does..
Very frustrating. I don't think PS6+CR is optimised for 32 bit windows system, but I don't see why it wont work given I still see 0.74GB of free RAM at the very least. Maybe its Camera Raw that has the issue rather than PS6?

Wrt54g connectivity issue

I have a wrt54g, it will only let two computers connect wirelessly at a time...Anyone got any ideas? Thanks in advance

It should allow 32 wireless computers to connect wirelessly...What is the problem you are facing on the other wireless computer while trying to connect wirelessly...If you are using the network name as "linksys"(default) then,try to change it to some unique name...Make sure that you are typing the correct Security/Network Key while connecting to the wireless network.

WRT54G Connection Issue

I am trying to set up a WRT54G in a school classroom. I can connect the computer direct to the wall ethernet jack and everything works fine. When I connect the wall jack to the WRT54G and then to the computer, I can access some websites but not others. Any suggestions?

Who is your Internet Service Provider...?
Are you able to open all the website when computer is connected to the Modem..?
Are you getting the problem on the wired computers only or on the wireless computer as well..?
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.
On the setup page of the router,under Security tab,uncheck "Block Anonymous Internet Requests" and click on Save Settings.Now check.

WRT54G Connection Issues XP

I have a WRT54G Wireless router, WPSM54G Printer Server, a Tivo, a Wii, and two Toshiba laptops (one XP, and one Vista). I originally had both laptops connect wirelessly with the router and my Tivo wired to the back of the router. I was using WPA encryption with this setup and had no problems whatsoever for several months. I then bought the printserver and re-setup the network from scratch. I also changed encryption from WPA to WEP and connected my Nintendo Wii (as the Wii does not support WPA). So my setup is now is as follows: Wireless: 1 XP Laptop 1 Vista Laptop 1 Nintendo Wii 1 WPSM54G Printserver Wired: Tivo My XP laptop gets frequent disconnects (that cannot be repaired) and only works sparingly and randomly. The Vista Laptop works fine. I've updated to firmware version 1.02.2 and the problem persists. I'm thankful to any insight you can provide.

swmason03 wrote:
I have a WRT54G Wireless router, WPSM54G Printer Server, a Tivo, a Wii, and two Toshiba laptops (one XP, and one Vista). I originally had both laptops connect wirelessly with the router and my Tivo wired to the back of the router. I was using WPA encryption with this setup and had no problems whatsoever for several months. I then bought the printserver and re-setup the network from scratch. I also changed encryption from WPA to WEP and connected my Nintendo Wii (as the Wii does not support WPA). So my setup is now is as follows: Wireless: 1 XP Laptop 1 Vista Laptop 1 Nintendo Wii 1 WPSM54G Printserver Wired: Tivo My XP laptop gets frequent disconnects (that cannot be repaired) and only works sparingly and randomly. The Vista Laptop works fine. I've updated to firmware version 1.02.2 and the problem persists. I'm thankful to any insight you can provide.
Hows the reception on the xp machine that keeps dropping the connection? I'm not sure if the WRT54G supports QOS or not (i'd have to login and check mine) but it seems like there is a lot of traffic on your little home network there QOS can be set to let one device have priority over other devices using the router, and in a crowded situation such as yours, it can make a lot of difference.
[OMGIRC.com]

Can anyone help with a WRT54G connection issue - it just stopped working

I have a Dell running Windows XP. I have a DSL connection with a Westell 6100 modem connected to a Linksys WRT54G router connected to my main computer. I use the router for a wireless connection to my laptop. This setup worked fine for years - until a few days ago. I no longer have internet access on my laptop and main computer.
If I connect from the modem directly to the main computer, I have internet access. But as soon as I put the router back in - I have no access.
All the appropriate lights on the modem and router are lit. When I do try to access the internet I get the dreaded PAGE CANNOT BE DISPLAYED. When I run the diagnostic, the error log shows: "Not all base service provider entries could be found in the winsock catalog. A reset is needed". I don’t know if this is a standard catch-all error or not?
Everything was fine until a few days ago when I just lost access. Do I need a new router? I hate to buy one and then find out something was corrupted on my computer instead. :-(
Thanks!

When connected from modem to PC directly (no router) and I type in ip[config /all (don't know if this is what i should do) -- I get:
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.168.1.1
DNS Servers 192.168.1.1
Does this mean I should try to change the LinkSys Router?
I will go look there next.

WRT54G connection issues with cable

My router was working fine after few months back, 1 thing I suspect is that I upgraded to the latest firmware of v.2.
The problem is the access to the out world stops working, I can login into the router wireless and access all the UI but if I PING from inside the router to an external site it just doesn't work.
The only way to fix this is by resetting to the default settings (in the administration tab) or hard reset (power button from the back), after this it works but I need to configure again the security, after a while may be a day or some times 4 days after it stops working again and I need to repeat the same steps.
What I believe is that for some reason something gets renewed in the router and messes up with the routing table so nothing can go outside the router itself.
I called Linksys and they didn't help is there somebody with the same issue ? How can I fix it?

Hi gerardo8a ,
Welcome to the Cisco Home Community forums. We are glad that you are one of our members now.
Please check our Terms and Conditions and this link and see if any procedure will help your problem.
We also have lots of experts here who are skilled and are willing to help and have been a member of this forums since the beginning.
Cheers!
OnnagokorO

WRT54G connection issues

Hello,
I just bought this router for my apartment this past tuesday. I set it up initially myself. I changed the SSID and stopped broadcasting it. I also set up a WEP security thing. I also set up MAC address filtering. I got my computer to connect to it just fine. I use a cable modem for internet. It has been running perfectly untill this morning. I tried to get on the internet this morning, and all of a sudden, i could not find the router on the network. My computer found another router in my building that was not secure ( very low signal strength but, my computer kept trying to connect to it). It didnt even see my router.
i initially changed the IP to something like 192.168.28.1 just to try to keep others from logging on if they are in range as an additional security measure ( Not sure if it really helps or not). I have been able to log in to the web based utility just fine through that IP. After several hours of trying to find it, I ended up moving the router and modem and hard wiring it to my computer. I managed to connect that way, and it seemd fine, but if i tried to go wireless again, it freaks out.
I reset the router several times, and it didnt help. I ended up calling tech support, didnt tell me anything i didnt really already know, but had me do a few things different. I upgraded the firmware to the latest version, and cloned my computers MAC address. i dont have everything else set back up again, but, now i can connect and seems just fine.
Any idea why it just stopped working for no apparent reason? Will this happen again?

Thank you for the rating.
If you want to make it as hard as possible, don't use WEP. Use WPA2 or WPA with a strong passphrase.
With SSID broadcast all it takes is a single transmitted packet through the wireless and anyone can pick the SSID up with a wireless card in monitor mode. The SSID is always transmitted unencrypted.
WEP can be broken within a few minutes.
The MAC addresses are also always transmitted unencrypted. You can clone any MAC address you want in the driver of your wireless card. Thus, all you have to do is to pick up a MAC address for your LAN and you are in.
If you don't want to check the settings as I have suggested then I cannot help you any further. You wrote that your computer tried to connect to a different network. The computer should not try to connect to any other wireless network except those on the preferred list unless configured to do differently.

Connectivity issue to database.

DB Version :10.2.0.2
OS:Sloaris 5.8
Yesterday the application server couldn't able to connect to the production database for 30 min .When i checked in the alert log ,i got primary unable to ping the standby database
LGWR: I/O error 3113 archiving log 3 to '*********'
ORA-01034: ORACLE not available
PING[ARC1]: Heartbeat failed to connect to standby '*********'. Error is 1034.
Error 1034 received logging on to the standby
WARNING: inbound connection timed out (ORA-3136)
In AWR report it showing log file sync as top wait event
My production database is in max performance mode
log_archive_dest_2 = service=********* lgwr async noaffirm net_timeout=10
The application team told me that at that time some stored procedure was running which used to do some bulk DML . But this stored procedure runs at the same time every day .
Is this issue is due to primary and standby database connectivity issue causing problem due to wihich the the lgwr of primary unable to write on standby and causing the log file sync to go high.and when i compared it with day before yesterday AWR report same procedure and sql's were executed with out issue at that time.
iF we change to ARCH will it help.
log_archive_dest_2 = service=********* ARCH noaffirm net_timeout=10

user8850066 wrote:
No it was not down at that time. will Standby DB cause any performance problem to primary if it is down and the primary is in max performance mode.
As per my knowledge it shouldn't in max performance mode. But not sure what will happen if the lgwr async in max performance.Now your standby database can receive logs from primary?
Post there your standby and primary database alert.log according this time.

Airport time capsule Extreme dropping connection issue i have already upgraded new firmware 7.7.3 but problem is still in wifi connectivity drop please solve this issue i have expanded my money in tc drive

time capsule drop wifi connection issue .I have already upgraded new firmware 7.7.3 but problem in not solve i am very confuse to resolving this issue.also i attached my log here.
May 15 11:37:43
5
Initialized (firmware 7.7.3).
May 15 11:37:50
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 11:37:50
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 11:37:50
5
Rotated TKIP group key.
May 15 11:37:51
5
Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
May 15 11:37:54
5
Associated with station b8:e8:56:1f:2c:98
May 15 11:37:54
5
Installed unicast CCMP key for supplicant b8:e8:56:1f:2c:98
May 15 11:38:27
5
Associated with station 78:a3:e4:ba:90:42
May 15 11:38:27
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 11:39:14
5
Connection accepted from [::ffff:192.168.1.170]:49439.
May 15 11:40:49
5
SMB/CIFS login OK from [email protected].
May 15 11:43:14
5
Connection accepted from [::ffff:192.168.1.170]:49452.
May 15 11:43:19
5
Connection accepted from [::ffff:192.168.1.170]:49454.
May 15 11:43:20
5
Connection accepted from [::ffff:192.168.1.170]:49456.
May 15 11:43:42
5
Disassociated with station b8:e8:56:1f:2c:98
May 15 11:43:43
5
Rotated TKIP group key.
May 15 11:44:20
5
Connection accepted from [::ffff:192.168.1.170]:49460.
May 15 11:45:21
5
SMB/CIFS login OK from [email protected].
May 15 11:47:33
5
Associated with station b8:e8:56:1f:2c:98
May 15 11:47:33
5
Installed unicast CCMP key for supplicant b8:e8:56:1f:2c:98
May 15 11:47:34
5
Disassociated with station b8:e8:56:1f:2c:98
May 15 11:47:35
5
Rotated TKIP group key.
May 15 11:47:57
5
Associated with station e4:92:fb:dc:02:0b
May 15 11:47:57
5
Installed unicast CCMP key for supplicant e4:92:fb:dc:02:0b
May 15 11:49:25
5
SMB/CIFS login OK from [email protected].
May 15 11:50:37
5
Connection accepted from [::ffff:192.168.1.170]:49472.
May 15 11:50:42
5
Connection accepted from [::ffff:192.168.1.170]:49474.
May 15 11:50:44
5
Connection accepted from [::ffff:192.168.1.170]:49476.
May 15 11:51:18
5
SMB/CIFS login OK from [email protected].
May 15 11:51:25
5
SMB/CIFS login OK from [email protected].
May 15 11:51:53
5
Connection accepted from [::ffff:192.168.1.170]:49478.
May 15 11:53:07
5
Idle timeout for station e4:92:fb:dc:02:0b
May 15 11:53:07
5
Disassociating with station e4:92:fb:dc:02:0b (reserved 4).
May 15 11:53:07
5
Disassociated with station e4:92:fb:dc:02:0b
May 15 11:53:07
5
Rotated TKIP group key.
May 15 11:54:45
5
Connection accepted from [::ffff:192.168.1.170]:49497.
May 15 11:54:52
5
Connection accepted from [::ffff:192.168.1.170]:49499.
May 15 11:54:57
5
Connection accepted from [::ffff:192.168.1.170]:49502.
May 15 11:55:15
5
Connection accepted from [::ffff:192.168.1.170]:49504.
May 15 11:55:24
5
Connection accepted from [::ffff:192.168.1.170]:49506.
May 15 11:55:45
5
Connection accepted from [::ffff:192.168.1.170]:49508.
May 15 12:05:39
5
SMB/CIFS login OK from [email protected].
May 15 12:05:40
5
unloading current configuration.
May 15 12:05:55
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 12:05:55
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 12:05:55
5
Rotated TKIP group key.
May 15 12:05:56
5
Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
May 15 12:06:00
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:06:00
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:06:45
5
Disassociated with station 78:a3:e4:ba:90:42
May 15 12:06:45
5
Rotated TKIP group key.
May 15 12:07:19
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:07:19
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:09:15
5
Connection accepted from [::ffff:192.168.1.170]:49576.
May 15 12:09:35
5
Connection accepted from [::ffff:192.168.1.170]:49578.
May 15 12:09:49
5
Connection accepted from [::ffff:192.168.1.170]:49580.
May 15 12:25:40
5
Connection accepted from [::ffff:192.168.1.170]:49709.
May 15 12:25:51
5
Connection accepted from [::ffff:192.168.1.170]:49711.
May 15 12:26:12
5
Connection accepted from [::ffff:192.168.1.170]:49717.
May 15 12:27:40
5
Connection accepted from [::ffff:192.168.1.170]:49723.
May 15 12:27:41
5
unloading current configuration.
May 15 12:27:56
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 12:27:56
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 12:27:56
5
Rotated TKIP group key.
May 15 12:28:00
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:28:00
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:29:23
5
SMB/CIFS login OK from [email protected].
May 15 12:29:31
5
Connection accepted from [::ffff:192.168.1.170]:49730.
May 15 12:29:31
5
Connection accepted from [::ffff:192.168.1.170]:49732.
May 15 12:34:15
5
Connection accepted from [::ffff:192.168.1.170]:49739.
May 15 12:34:16
5
unloading current configuration.
May 15 12:34:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 12:34:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 12:34:31
5
Rotated TKIP group key.
May 15 12:34:49
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:34:50
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:36:07
5
Connection accepted from [::ffff:192.168.1.170]:49745.
May 15 12:36:08
5
Connection accepted from [::ffff:192.168.1.170]:49747.
May 15 12:40:40
5
Associated with station 10:68:3f:46:d2:69
May 15 12:40:41
1
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
May 15 12:40:41
5
Deauthenticating with station 10:68:3f:46:d2:69 (reserved 2).
May 15 12:40:41
5
Disassociated with station 10:68:3f:46:d2:69
May 15 12:41:48
5
Disassociated with station 10:68:3f:46:d2:69
May 15 12:42:12
5
Connection accepted from [::ffff:192.168.1.170]:49759.
May 15 12:42:13
5
unloading current configuration.
May 15 12:42:28
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 12:42:28
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 12:42:28
5
Rotated TKIP group key.
May 15 12:42:32
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:42:32
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:44:04
5
Connection accepted from [::ffff:192.168.1.170]:49768.
May 15 12:44:10
5
Connection accepted from [::ffff:192.168.1.170]:49771.
May 15 12:45:03
5
Connection accepted from [::ffff:192.168.1.170]:49773.
May 15 12:45:03
5
unloading current configuration.
May 15 12:45:18
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 12:45:18
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 12:45:18
5
Rotated TKIP group key.
May 15 12:45:23
5
Associated with station 78:a3:e4:ba:90:42
May 15 12:45:23
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 12:46:23
5
Associated with station e4:92:fb:dc:02:0b
May 15 12:46:24
5
Installed unicast CCMP key for supplicant e4:92:fb:dc:02:0b
May 15 12:46:43
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:46:43
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:46:58
5
Connection accepted from [::ffff:192.168.1.170]:49780.
May 15 12:47:02
5
Connection accepted from [::ffff:192.168.1.170]:49782.
May 15 12:47:05
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:47:05
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:47:13
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:47:14
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:47:27
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:47:30
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:47:39
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:47:40
5
Rotated TKIP group key.
May 15 12:47:44
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:47:44
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:49:07
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:49:07
5
Rotated TKIP group key.
May 15 12:49:13
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:49:13
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:51:19
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:20
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:20
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:51:26
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:30
5
Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
May 15 12:51:30
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:51:31
5
Rotated TKIP group key.
May 15 12:51:31
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:31
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:51:34
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:38
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:40
5
Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
May 15 12:51:40
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:51:40
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:41
5
Rotated TKIP group key.
May 15 12:51:42
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:42
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:51:47
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:49
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:49
5
Installed unicast CCMP key for supplicant 24:fd:52:d0:3c:50
May 15 12:51:55
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:57
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:51:59
5
Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
May 15 12:51:59
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:51:59
5
Rotated TKIP group key.
May 15 12:52:05
5
Associated with station 24:fd:52:d0:3c:50
May 15 12:52:09
5
Deauthenticating with station 24:fd:52:d0:3c:50 (reserved 2).
May 15 12:52:09
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:52:20
5
Disassociated with station 24:fd:52:d0:3c:50
May 15 12:59:22
5
Connection accepted from [::ffff:192.168.1.170]:49810.
May 15 12:59:22
5
Connection accepted from [::ffff:192.168.1.170]:49812.
May 15 13:00:07
5
Connection accepted from [::ffff:192.168.1.170]:49817.
May 15 13:00:07
5
unloading current configuration.
May 15 13:00:22
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 13:00:22
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 13:00:22
5
Rotated TKIP group key.
May 15 13:00:35
5
Associated with station 78:a3:e4:ba:90:42
May 15 13:00:35
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 13:02:00
5
Connection accepted from [::ffff:192.168.1.170]:49826.
May 15 13:02:00
5
Connection accepted from [::ffff:192.168.1.170]:49828.
May 15 13:03:14
5
Connection accepted from [::ffff:192.168.1.170]:49832.
May 15 13:03:15
5
unloading current configuration.
May 15 13:03:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 13:03:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 13:03:31
5
Rotated TKIP group key.
May 15 13:04:03
5
Associated with station 78:a3:e4:ba:90:42
May 15 13:04:03
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 13:05:07
5
Connection accepted from [::ffff:192.168.1.170]:49843.
May 15 13:05:07
5
Connection accepted from [::ffff:192.168.1.170]:49845.
May 15 13:06:15
5
Connection accepted from [::ffff:192.168.1.170]:49848.
May 15 13:06:16
5
unloading current configuration.
May 15 13:06:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
May 15 13:06:31
5
Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
May 15 13:06:31
5
Rotated TKIP group key.
May 15 13:07:04
5
Associated with station 78:a3:e4:ba:90:42
May 15 13:07:04
5
Installed unicast CCMP key for supplicant 78:a3:e4:ba:90:42
May 15 13:08:08
5
Connection accepted from [::ffff:192.168.1.170]:49854.
May 15 13:08:09
5
Connection accepted from [::ffff:192.168.1.170]:49856.
May 15 13:08:20
5
Connection accepted from [::ffff:192.168.1.170]:49858.
May 15 13:12:31
5
unloading current configuration.
May 15 13:32:36
1
WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
May 15 13:32:57
1
WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
May 15 13:33:09
1
WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
May 15 13:33:22
1
WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
May 15 13:33:33
1
WPA handshake failed with STA 1c:7b:21:9c:20:fd likely due to bad password from client
May 15 15:21:21
1
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
May 15 15:21:26
1
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
May 15 15:21:41
1
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client

It says you have the wrong password.
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
Reset the TC to factory and start again.
But do not be surprised if the v5 utility no longer works to do the setup.

TS1398 My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

WRT54G connected to my Bell HSE Sympatico SpeedStream Modem.

I have my WRT54G connected to my Bell HSE Sympatico SpeedStream Modem. It all worked fine until I tried to set the WRT54G to forward some ports so that I can get to one of the PCs from outside via the NET. I am running Windows XP pro on the PC After I set the post forwarding I still could not see the router from the Net. It seems that the Bell Modem is “blocking” something> I would appreciate some insight to solve this issue.

There should not be a problem if you are using either the speedstream 4200 or 5300 as they are standard modems. The 6300 and the 6520 are modem/routers so you may have to change a setting. You can also post on the Bell Forum.
Greetings from Northern Ontario, Canada

WRT610N v1 connection issues, media center and internet

Good evening. I am having a connection issue with my wireless/wired connection and am wondering if anyone else has had the issue.
I am running the following
WRT610N V1
Firmware Version: 1.00.03 B15
Windows 7 Enterprise Edition
I have an Xfxforce 780i motherboard with onboard dual 1gb nics plugged into the router.
I am also using an Xbox 360 Wireless N device.
The issue i have been having recently are two, both seem to be router related. Sometimes while gaming or on the web I will losing connection to my gateway. I have both of my nic mac addressed reserved in the router. On my windows 7 machine the internet connection will stop working and I will have to repair the connection.
The issue i have been experiencing with my Xbox 360 is sever choppiness while streaming recorded tv shows over my network
For the most part while I am streaming the video's i am doing nothing else, it should be noted that i can watch the vidoes on the PC without an issue so the issue shouldn't be pc related. I initally though maybe resource related but the vidoes run fine on the pc. Restarting has no effect.
I did do a hard reset on my router but that did not solve the issue. The issue is semi random but the frequence is fairly higher. Sometimes I will get through a full show or two and sometimes the quality of the steam will be horried. Where pausing and restarting won't do anything.
I have used a direct wired connection and I still get the video degredation so I believe the issue is my access point.
For the price that i paid for this unit, $200 - yes i did say 200 as it is a V1 model and i got it when they came out, this is one of the worst issue I have ever had.
I am going to test a netgear 54g tomorrow night to see what experience I get.
I did some poking on the forum here and I noticed others have had some degredation issue but nothing seem to solve it even though their threads are marked as solved. I have tried turning off windows 7 firewall and disabling my AV to make sure those weren't the issue, which they aren't.
It should be noticed that my machine is the following and I am fairly sure the issue isn't pc hardware related.
win7 pro
xfx force 780i
intel e8500 dc 3.16
evga nvida 9800 gtx ssc
seagate dual 250gb raid 0 hard drive
4gb g.skill pc8500 ram.
I am adding more ram later this weekend to take it to 8gb and a new 1tb drive to transfer my media center data too. I do not believe this will fix my issue since the only issue I can see is the Linksys router.
thoughts?

Try these things, in this order:
1. Disable Home Defender.
If that does not work, try
2. Reducing MTU to 1300 (recommended by someone else on here for a throughput issue). This may not be relevant to you, but it doesn't hurt to try. MTU settings don't generally apply to in-network connections. But who knows what's what when it comes to this router.
3. Disable Upnp. Some people, like myself find this setting necessary - but you may want to just go ahead and disable to see if that helps.
4. You need to remove the name of the competing product (that router) from your post. I got banned from the forum for a few days for mentioning that I was using so and so router for the time being. Do it before the post is deleted or you're banned.
Good Luck. Let us know if anything here fixes your problem.
Remember that you'll need to give the router 'time' with each fix separately. Don't do all 3 things. Do 1 at a time and give the router a few days, to feel out if the solution works or not.
Good Luck.

WRT54G connectivity issues (ram problem?)

Similar Messages

Maybe you are looking for