WRT610N only operates in B mode

I have all wireless G or N devices on my network.  However, my Alienware Laptop with a wireless N card will only connect in B mode.  My desktop, which also uses a wireless N card only connects at 1mb a second.  Am i doing something wrong?  I set it up in mixed mode because my PS3 and Tivo can only connect with G.  What should my setting look like to connect at a better rate?

You need to do some changes in the router ...
Radio Band -- 20 Mhz
Wide Channel -- 6
Standard Channel - 11

Similar Messages

  • Airport Time Capsule will only operate in Bridge mode

    Im a Verizon dsl customer and am trying to configure an Airport Time Capsule with a Westell 2200 modem.  The only workable configuration I can come up with is bridge mode.  Every other configuration has some sort of conflict with the modem.  I have tried to set the modem in bridge mode, with DHCP service both on and off, and connect with the Airport Time Capsule, but was unable to get an internet connection ( I used the password and login for my main email account - perhaps I should have used the vzid but I don't know the password - in the modem I see it says "set by verizon").  
    I never had this problem with any other router I have used.
    Any ideas?  Thanks, Klaus
    Solved!
    Go to Solution.

    klaus57 wrote:
    Very sorry if this is a stupid question, but if I don't get the dns service from the westell 2200, where will I get it from?  The routher asks for this address during the PPPoE setup.
    Thanks,
    Klaus
    DNS should come from the PPPoE connection itself automatically. If you have to, define servers such as 8.8.8.8 and 8.8.4.4. If you have about a half an hour of time where you can leave your machine idle, I would recommend running the DNS Benchmark program from Gibson Research to choose the best (fastest) servers for you.
    https://www.grc.com/dns/benchmark.htm
    Pick the two consistently fast servers. The program will give you some general recommendations when it completes. I recommend setting up the Custom nameserver list when theprogram asks for that.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Screen go's black after windows 7 welcome, only operates in safe mode plz help ty.

    tried reboot, virus scan ,was adjusting screen rez when this happened,tried restore,scan for problems all says ok

    Hello stevelaura,
    The problem is with your video driver if the problem exists only after booting into Windows.
    1. Boot into safe mode
    2. Click start and type "Device Manager" without the quotes in the search box.
    3. Launch Device manager and expand the Display Adapter section.
    4. Right click on your display driver and tell it to uninstall
    5. Press the Win key on your keyboard then the right arrow twice. Then the letter R.
    Once the system reboots allow it to go into Windows as normal. Windows will automatically attempt to install a new video card driver for the system.
    If that doesn't help resolve the issue please respond and include the make and model of the system you are using.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • New OS 3gs wiped out contacts now only operate in Emergency Call mode

    HELP!!! I installed the new OS on my 3gs last night. This morning I noticed all contacts wiped out. So I tried to do a restore and now I'm getting error messages in iTunes and my phone will ONLY operate in Emergency call mode. I need help PLEASE!!
    thanks!

    Unfortunately that's where the problem started I keep getting and unknown error everytime I try to Sync up. This keeps happening after I did the restore in iTunes. I've turned off the phone, logged out of itunes and I keep getting the same error about error -9812

  • What are the settings to remain only in the 5MHz mode?

    I would like to remain only in the 5MHz mode ond skipp the 2.4 MHz ode in my wireless net: What ate te setting 802.11 a/n - 802.11 b/g/n ans what do tey mean?
    Hans

    The Time Capsule and AirPort Extreme are simultaneous dual band wireless routers. This means that they broadcast both a 2.4 GHz and 5 GHz signal at the same time.
    It is not possible to turn off one band and leave the other active. Either both bands are "on", or both bands are "off".
    The setting of 802.11a/n  ---  802.11 b/g/n is the default setting for the Time Capsule and AirPort Extreme.
    802.11a/n are 5 GHz wireless modes. The other side of the ---- (dash) 802.11 b/g/n are 2.4 GHz modes.
    Note that "n" wireless can operate at both 2.4 GHz and 5 GHz settings.
    By default, both the 2.4 GHz and 5 GHz bands use the same wireless network name.
    It is possible using Wireless Options in AirPort Utility to assign a separate name to the 5 GHz band if you wish, but this will not turn off 2.4 GHz.

  • 2011 MBP only boots in safe mode after yosemite update

    After attempting to update to yosemite, 2011 MBP (16GB Ram, 1TB HD) will only boot into safe mode. If I reboot without holding the shift key, I get the Apple logo and progress bar ......... that never goes away, just hangs about half way through. Any help?
    Dan

    Hey there Danielrbjo,
    It sounds like you are unable to boot your mac without using Safe Boot. I would use the other troubleshooting from the following article, named:
    Mac OS X: Gray screen appears during startup
    Disconnect, test peripheral devices and network cables
    Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
    Disconnect any Ethernet cables.
    Start up your Mac.
    If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable). 
    Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
    If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
    If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
    Reset the NVRAM / PRAM
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Reset the NVRAM / PRAM.
    If the gray screen issue persists, go to the next section.
     Remove third-party RAM and internal hardware
    Remove any non-Apple RAM or other third-party hardware upgrades (such as expansion cards or third-party optical drives or hard drives, if present) to help isolate the issue. This is necessary to get as close as possible to the original factory hardware configuration of your Mac.
    If you are not sure which RAM modules or other hardware is Apple or third-party, or if you are not comfortable performing these steps, or if you have a Mac mini, consider contacting an Apple Authorized Service Provider for assistance. Otherwise, perform these steps before going to the next section.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Open your Mac to access the memory slots. Refer to the User Guide that came with your Mac, or search Apple Support Manuals for a PDF copy of your Mac's User Guide.
    Remove any third-party RAM that has been installed.
    Reinstall the Apple RAM that came with the computer if available. Note that Mac OS X 10.5 requires 512 MB or more of RAM; Mac OS X 10.4 requires 256 MB or more of RAM.
    If your Mac starts up with only Apple RAM installed, contact the vendor of your third-party RAM.
    If you have installed a third-party drive, ensure it is running the latest firmware. Otherwise, reinstall the Apple drive that came with the computer if available. 
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

    I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

    Demons1 in the future please only migrate your documents and settings.
    Please use the uninstallers to remove your current installation.  They are located in the Applications/Utilities/Adobe Installers folder.  Once the uninstall is complete you will also want to run the CC Cleaner Tool.  You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

  • IMac mid 2010 21.5' can only run in safe mode

    My iMac (mid 2010) cannot reboot recently. It can only be boot in safe mode by pressing 'shift' when turning on. If boot normally, it will stuck on the grey apple logo screen. I tried re-install os, clean os installation, restore os using Time Machine etc, but none of these works.
    If I turn off the computer for a whole night, it will then turn on the next morning. But, after a few minutes of watching video in YouTube, the screen gets frozen and I have to restart it manually, then only safe boot can work ... Now, even if I don't touch it for 24 hours, it can't start normally but safe boot.
    I run the 'apple hardware test' by pressing D when reboot, the AHT did not detect any hardware problem. But I guess there is hardware problem with the logic board or graphic card.
    The operation system is 10.9.4. I restored it to 10.9.2 using Time Machine, but the same symptom.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr \, \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Help! MacBook Pro only boots in Safe Mode and runs extremely slow (bonus: happened in Brazil and there are no Apple stores here - I need you guys!)

    It's a MBP mid 2010. Last year it had some problems and an Apple authorised shop changed the HD and upgraded the OS from Snow Leopard to Lion. After that it seemed fine. Recently it started getting very slow and apps (e.g. Chrome, Flash) would crash. At some point it seemed stuck so I gave it a hard shutdown - bad idea. After that it would only boot in Safe Mode. I ran repar disk and repair permissions from the Disk Utility and it booted normally again but extremely slow. I upgraded to OS X 10.8.2, but didn't solve it. I tried booting with Command D to have a hardware diagnostic - it wouldn't boot and now it only boots in Safe Mode.
    All data is backed and I have an external HD (but not an OS X Disc). Ready to anything. Help please!
    Utility Disk Logs
    Repairing permissions for “Macintosh HD”
    Group differs on “Library/Java”; should be 0; group is 80.
    Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .
    Repaired “Library/Java”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
    Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
    Repaired “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”
    Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Resources”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
    Repaired “System/Library/Frameworks/CoreGraphics.framework/Resources”
    Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
    Repaired “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”
    Permissions repair complete
    Verifying volume “Macintosh HD”
    Checking file systemPerforming live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.
    Verifying and repairing partition map for “ST9500325AS Media”
    Checking prerequisites
    Checking the partition list
    Adjusting partition map to fit whole disk as required
    Checking for an EFI system partition
    Checking the EFI system partition’s size
    Checking the EFI system partition’s file system
    Checking all HFS data partition loader spaces
    Reviewing boot support loaders
    Checking Core Storage Physical Volume partitions
    Updating Windows boot.ini files as required
    The partition map appears to be OK

    See this for incompatible log in items
    https://support.apple.com/kb/TS4348
    Also you can perform #1 and #2 as these occur before Safe Mode, so you just reboot again with Shift key if you need to enter Safe Mode again.
    At this point it sounds like your hard drive is dying or some sort of other hardware issue which I can only advise this.
    Try to install OS X on a external drive and boot from it, if it's fine then you know your internal boot drive is dying.
    Create a data recovery/undelete external boot drive
    You can replace your internal drive yourself.
    OtherWorld Computing is pretty good about providing drives and tool kits to perform that function yourself.
    Install/upgrade RAM or storage drive in Mac's

  • My macbook pro will only boot in safe mode

    Hey,
    I have a macbook pro 15-inch, Early 2011 running osx 10.9.4. I have a SSD hard drive that i installed myself a year ago and hasn't shown any defects. Its a 120 gb OCZ-AGILITY3.
    My problem:
    My macbook will only boot in safe mode nowadays. I have done a complete erasion of my hard drive and installed osx mavericks twice already. After the installation the computer will safely go to the desktop. But if i then do a reboot it won't get further than after the first apple logo, sometime the turning wheel will pop up, before turning off and trying again. i have tried resetting PRAM, I have tried resetting SMC, i have tried avoiding SMC (with big fan rate), but all with no success.
    I have done a complete hardware test (the longer one) and it showed "no troubles found".
    My guess is that the problem is with the battery. My computer won't run anymore without the adapter, when i pull the adapter out it either stays on for a while before just turning off. Without having it plugged in it won't start. Is it possible that during normal start up there is some kind of communication with the battery that can cause this?
    I ran a diagnostic shown in this thread (Will only boot in safe mode) and included it in this post.
    Hope someone can help me out.
    Thanks,
    Bram
    Start time: 17:07:42 08/25/14
    Model Identifier: MacBookPro8,2
    System Version: OS X 10.9.4 (13E28)
    Kernel Version: Darwin 13.3.0
    Boot Mode: Safe
    Time since boot: 10 minutes
    Battery
      Condition: Replace Now
    Diagnostic reports
      2014-08-25 UserEventAgent crash
    Log
      Aug 26 00:41:52 Previous Shutdown Cause: -128
      Aug 25 16:23:38 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:24:05 process rpcsvchost[94] thread 917 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 100.014147 seconds, (82.533432 user, 17.480715 system) ledger info: balance: 90006319931 credit: 100003230498 debit: 9996910567 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90079246240
      Aug 25 16:25:50 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
      Aug 25 16:58:05 jnl: b(1, 3): examining extra transactions starting @ 9773056 / 0x952000
      Aug 25 16:58:05 jnl: b(1, 3): txn starting at 9773056 (9773056) @ index  80 bnum 2696544 (8192) with disk cksum != blhdr cksum (0x93b69228 0xc647562)
      Aug 25 16:58:05 jnl: 0x662b0000 0x451b0000 0x2a0001ff 0x40000000  0xd7330300 0x46001d00 0x6c006f00 0x65006400
      Aug 25 16:58:05 jnl: b(1, 3): restarting journal replay (9340928 - 9773056)!
      Aug 25 16:58:05 jnl: b(1, 3): replay_journal: from: 9340928 to: 9773056 (joffset 0x37a000)
      Aug 25 16:58:05 jnl: b(1, 3): journal replay done.
      Aug 25 16:58:06 Previous Shutdown Cause: -128
      Aug 25 16:59:26 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
      Aug 25 16:59:59 smb1_treeconnect_internal: Malformed tree connect with a bad word count! wc= 2
    Activity
      CPU: user 17%, system 4%
    CPU per process: WindowServer (UID 0) is using 30.5  %
    launchd
      /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist
      - com.apple.AirPortBaseStationAgent
    Contents of /System/Library/LaunchAgents/com.apple.AirPortBaseStationAgent.plist (XML  document text)
      <?xml version="1.0" encoding="UTF-8"?>
      <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
      <plist version="1.0">
      <dict>
      <key>Label</key>
      <string>com.apple.AirPortBaseStationAgent</string>
      <key>EnableTransactions</key>
      <true/>
      <key>LowPriorityIO</key>
      <true/>
      <key>LimitLoadToSessionType</key>
      <string>Aqua</string>
      <key>POSIXSpawnType</key>
      <string>Background</string>
      <key>LaunchEvents</key>
      <dict>
      <key>com.apple.distnoted.matching</key>
      <dict>
      <key>com.apple.airport.agent.prefschanged</key>
      <dict>
      <key>Name</key>
      <string>com.apple.airport.agent</string>
      </dict>
      </dict>
      <key>com.apple.bonjour.events</key>
      ...and 21 more line(s)
    Spotlight: Indexing and searching disabled
    Font issues: 11
    Wi-Fi
      link auth: wpa-psk
    Restricted files: 1
    Elapsed time (s): 278

    Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

  • Mavericks can only boot in safe mode

    In can only boot my Imac 27' (end of 2009) in safe mode.
    The problem started in Lion, when the computer suddenly froze.
    I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
    My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
    Even with all this, I can only start in safe mode.
    Here is a copy of the log. If anyone can help, I would be grateful !
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
    03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
    03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
    03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
    03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
    03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
    03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
    03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
    03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
    03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
    03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
    03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
    03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
    03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
    03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
    03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
    03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
    03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
    03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
    03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
    03.05.14 11:48:37.000 kernel[0]: 2.300782:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
    03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
    03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
    03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
    03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
    03.05.14 11:48:37.000 kernel[0]: init
    03.05.14 11:48:37.000 kernel[0]: probe
    03.05.14 11:48:37.000 kernel[0]: start
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
    03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
    03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
    03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
    03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (502 27 1097)
    03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
    03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
    03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    03.05.14 11:48:37.642 kdc[78]: label: default
    03.05.14 11:48:37.642 kdc[78]:     dbname: od:/Local/Default
    03.05.14 11:48:37.642 kdc[78]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:37.642 kdc[78]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
    03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
    03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
    03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
    03.05.14 11:48:43.092 configd[56]: network changed.
    03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
    03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
    03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
    03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
    03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    03.05.14 11:48:46.813 digest-service[67]: label: default
    03.05.14 11:48:46.813 digest-service[67]:     dbname: od:/Local/Default
    03.05.14 11:48:46.813 digest-service[67]:     mkey_file: /var/db/krb5kdc/m-key
    03.05.14 11:48:46.814 digest-service[67]:     acl_file: /var/db/krb5kdc/kadmind.acl
    03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
    03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
    03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
    03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
    03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
    03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
    03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
    03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
    03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
    03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
    03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
    03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
    03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
    03.05.14 11:48:50.554 configd[56]: network changed: DNS*
    03.05.14 11:48:50.556 configd[56]: network changed: DNS*
    03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
    03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
    03.05.14 11:48:50.561 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
    03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    03.05.14 11:48:51.199 kdc[78]: KDC started
    03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
    03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume.  destroying old logs. (157 8 1095)
    03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
    03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
    03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
    03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume.  destroying old logs. (155 10 1095)
    03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
    03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
    03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
    03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
    03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
    03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
    03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
    03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
    03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
    03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
    03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
    03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
    03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
    03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
    03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
    03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
    03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
    03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
    03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
    03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
    03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
    03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
    03.05.14 11:51:07.187 distnoted[172]: # distnote server agent  absolute time: 177.064182367   civil time: Sat May  3 11:51:07 2014   pid: 172 uid: 502  root: no
    03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
    03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
    03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
    03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802

    I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
    I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
    I am posting the latest system log (on this one, I forgot to unplug the printer)
    Please help !!!
    May  4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.appstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.authd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.bookstore" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.eventmonitor" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.install" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.iokit.power" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.mail" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.MessageTracer" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.performance" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:44 localhost syslogd[19]: Configuration Notice:
        ASL Module "com.apple.securityd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
    May  4 20:38:45 --- last message repeated 6 times ---
    May  4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
    May  4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    May  4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
    May  4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    May  4 20:38:44 localhost kernel[0]: zone leak detection enabled
    May  4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
    May  4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
    May  4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
    May  4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    May  4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
    May  4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    May  4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May  4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    May  4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
    May  4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    May  4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
    May  4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    May  4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    May  4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
    May  4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
    May  4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
    May  4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
    May  4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    May  4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
    May  4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
    May  4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    May  4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    May  4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    May  4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
    May  4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
    May  4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
    May  4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
    May  4 20:38:44 localhost kernel[0]: USBF:    1.518    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
    May  4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
    May  4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
    May  4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
    May  4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
    May  4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
    May  4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
    May  4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
    May  4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
    May  4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
    May  4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
    May  4 20:38:44 localhost kernel[0]: 2.261691:   pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    May  4 20:38:44 localhost kernel[0]: USBF:    4.521    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    5.362    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    8.760    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: USBF:    9.587    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 3 of Hub at 0xfd140000)
    May  4 20:38:44 localhost kernel[0]: USBF:    10.418    The IOUSBFamily was not able to enumerate a device.
    May  4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
    May  4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
    May  4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    May  4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    May  4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    May  4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    May  4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
    May  4 20:38:45 localhost distnoted[65]: # distnote server daemon  absolute time: 28.917725827   civil time: Sun May  4 20:38:33 2014   pid: 65 uid: 0  root: yes
    May  4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
    May  4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
    May  4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
    May  4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    May  4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    May  4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
    May  4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
    May  4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
    May  4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
    May  4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: init
    May  4 20:38:49 localhost kernel[0]: probe
    May  4 20:38:49 localhost kernel[0]: start
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
    May  4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    May  4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    May  4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
    May  4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    May  4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    May  4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
    May  4 20:38:49 localhost kernel[0]: DSMOS has arrived
    May  4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
    May  4 20:38:51 localhost kdc[79]: label: default
    May  4 20:38:51 localhost kdc[79]:     dbname: od:/Local/Default
    May  4 20:38:51 localhost kdc[79]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:51 localhost kdc[79]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost digest-service[66]: label: default
    May  4 20:38:52 localhost digest-service[66]:     dbname: od:/Local/Default
    May  4 20:38:52 localhost digest-service[66]:     mkey_file: /var/db/krb5kdc/m-key
    May  4 20:38:52 localhost digest-service[66]:     acl_file: /var/db/krb5kdc/kadmind.acl
    May  4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    May  4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
    May  4 20:38:52 localhost configd[55]: network changed.
    May  4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
    May  4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
    May  4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    May  4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    May  4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
    May  4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
    May  4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
    May  4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
    May  4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
    May  4 20:38:58 --- last message repeated 1 time ---
    May  4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
    May  4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    May  4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
    May  4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
    May  4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
    May  4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
    May  4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    May  4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
    May  4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    May  4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
    May  4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
    May  4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
    May  4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
    May  4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    May  4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    May  4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
    May  4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
            "00-22-41-ce-73-b2",
            "7c-d1-c3-bc-ed-9b",
            "04-f1-3e-e9-76-f5",
            "d4-88-90-f0-2d-96",
            "90-27-e4-f2-fd-53"
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
    May  4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    May  4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
    May  4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
    May  4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
    May  4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
    May  4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
    May  4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
    May  4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
    May  4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    May  4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
    May  4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
    May  4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
    May  4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
    May  4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
    May  4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
    May  4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
    May  4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
    May  4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
    May  4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
    May  4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
    May  4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
    May  4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
    May  4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
    May  4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
    May  4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
    May  4 20:39:43 --- last message repeated 1 time ---
    May  4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
    May  4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
    May  4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
    May  4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
    May  4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    May  4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA  101069000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID  307029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3  100059000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA  200009000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4  404029000 is in exception list, allowing to load
    May  4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC  304089000 is in exception list, allowing to load
    May  4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx  300029000 is in exception list, allowing to load
    May  4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
    May  4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent  absolute time: 252.755084619   civil time: Sun May  4 20:42:17 2014   pid: 161 uid: 502  root: no
    May  4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
    May  4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent  absolute time: 272.385323107   civil time: Sun May  4 20:42:37 2014   pid: 169 uid: 89  root: no
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
    May  4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
    May  4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
    May  4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0

  • How can I transfer files from a 27" iMac which will only boot in safe mode?

    My late 2009 27" imac is having issues and will only boot in safe mode. I have tried to transfer files to a new Imac using migration assistant but it wont let me. If I try booting the old Imac normally I just get a grey screen, I believe it is the video card failed and am waiting for a fix, but I would like to transfer files before the fix in case something goes wrong and I lose everything.
    Any help would be great

    Hello Myles, likely it is a Hardware problem.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Installed itunes 10.5.2 on my laptop and now it only runs in safe mode HELLLLP!!!

    I installed itunes 10.5.2 on my laptop and when it rebooted after it said that it could not connect to my ipod because of something to do with "apple mobile device" I tried unsuccessfully to find an answer and whilst trying to find an anwer my laptop froze and crashed and everything said it was not responding that was when it actually opened anything.
    I've found the solution to get it to connect to the mobile devices however my laptop will only run in safe mode and i cant fix the problem in safe mode!!
    My question is if I uninstall and reinstall itunes will i lose all my playlists? or does anyone have a solution to fix my itunes????????

    The Apple launch issues article suggests pulling 3rd-party plug-ins if the problem doesn't happen in Safe Mode.
    Here's the article that will walk you through the process -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

    I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

    > So now my question is, how can i fix this problem?
    Use the Toshiba recovery disk or the Toshiba HDD recovery option.
    If you dont have the Toshiba Recovery disk try the HDD recovery:
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    This works only if the recovery image files from Toshiba are still on the HDD:
    If you installed the system using another disk as Toshiba recovery disk, this recovery option will not work.

  • HELP!! My player only starts in safe mode and won't do anything!

    <FONT face="Comic Sans MS" size=3>I dropped my nomad zen xtra (which i have to say has happened before), but this time it locked up - i couldn't shut it down or do anything else. Now when I start it, it only starts in safe mode, but it won't do anything in safe mode. It tells me "hard disk problems". It won't allow me to reformat even. What do I do?

    Sounds like the player is broken. You can either return it to Creative for a paid repair, or try and fix it yourself by replacing the hard dri've (assuming that's what's broken). There's a guide here on hard disk replacement, but it's not for the faint hearted

Maybe you are looking for

  • Convert different types of files and merged them into one pdf

    Hi, everyone. I'm girl from China. There is folder containing severl files of different types, like doc, msg, jpeg etc.   And I want to convert and merge them into one pdf following a certain order. I know that PDFmaker can do that nicely, but the pr

  • Problem with creation of Return Delivery

    Hi gurus, I have created a return sales order without reference. But when I click on PGR, following error is shown 1) Item 10, mtl staging data 10.03.08 replaced by current date 2) Outbound delivery is on backorder.(check shipping deadline). Please l

  • Remittance email  in ECC 6.0

    Hi Experts, Using Remittance email  (Report ZFFOGB_T) in Ecc 6.0 we cannot send email. Allthough same program works fine in 4.6 C . Does anyone know where can be the problem. Thanks and Regards Neha Kapoor

  • Hi, can anyone help with the following?:

    I recently upgraded from an iPhone 4 to a 4s & the 4 was fully backed up to the iCloud prior to the exchange. Unfortunately the 4s then got damaged & had to be exchanged for a new one - a back up had taken place during this time so what I would like

  • New iPad Covers and Protection

    Just thoughts would start a discussion about which covers people are using to protect their new iPad (3rd Gen). I am using an Apple Smart Cover coupled with a Knomo slim sleeve.  I roll the smart cover back and rest it on the leather Knomo slim to pr