Ws security enabled in soap

Hi Everyone,
Am trying SOAP to RFC scenario where i want to send the SOAP request with ws security enabled. In the SOAP header of request am sending username and password
as below
" <soapenv:Header>
      <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
         <wsse:UsernameToken wsu:Id="UsernameToken-30094810" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
            <wsse:Username>username</wsse:Username>
            <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">password</wsse:Password>
         </wsse:UsernameToken>
      </wsse:Security>
   </soapenv:Header>    "
i want the specified username and password to be validated in XI.
Am getting "ERROR:java.net.SocketTimeoutException: Read timed out" error when i tried to send the request.
Can any one tell what configuration i need to do to make it work.
Thanks & Regards,
Sakthi

Have a look at SAP Note 856597
Q. Can I configure the timeout value of my receiver adapter?
U can increase the timeout parameter there
Regards,
Prateek

Similar Messages

Unable to call WSS (WS-Security) enabled Web Service using UTL_DBWS

We are attempting to call a WSS (WS-Security) enabled Web Service from PL/SQL using the UTL_DBWS package (see [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_dbws.htm#CHDIDGJH] ). We are doing this in similar fashion to [http://www.oracle-base.com/articles/10g/utl_dbws10g.php] with calls to utl_dbws.create_service, utl_dbws.create_call and utl_dbws.invoke.
Using this method we can successfully call an unsecured Web Service, but calls to WSS-enabled Web Services fail. We are currently using Oracle Database 10.2.0.3.
The failure we are getting is:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPolicy(S) ): No Security Header found;nested
exception is com.sun.xml.wss.XWSSecurityException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPlicy(S) ): No Security Header found
Apparently UTL_DBWS does not support calling WSS enabled services, although this doesn't appear to be an officially recognised position. Does anyone know if Oracle are planning to support this soon (if ever)? Looking at Re: Calling WS from PL/SQL using WS-security suggests that support has been considered before, but not yet realised.
Thanks,
Tom

Having raised a Service Request with Oracle support on this, I got the following response from Oracle Development (On unpublished bug [8542959|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=8542959]):
Development has confirmed that WS-Security is not supported through UTL_DBWS. They have also acknowledged that this is not documented and they will change the official Oracle documentation will reflect this fact. From what is being stated, it would appear that there is no plan to support the use of WS-Security through UTL_DBWS in any release in the near future.
So, in short, without developing your own home-grown SOAP request, there is no way to call a WSS enabled web service from within PL/SQL.
-Tom

How to connect my IPad to a security enabled wifi

how to connect my IPad to a security enabled wifi

iPad not connecting to a Secure Wi-Fi signal
Turn OFF your wifi hub so the network is not broadcasting (or go out of range) so the
iPad can no longer see the SSID
Choose another network
Type in the SSID (WiFi Network name)
Select the security type
Enter the password
At this point, you will not be able to join the network (it is not turned on or you walked out of range, remember?)
Turn ON your network hub and wait for the DSL or Internet to get connected, (30 secs to 1 minute in my case) or walk back in range
Then click the Join button on the iPad
Voila, as they say in Texas

Server errors result in blank pages with security enabled

I have been working to security-enable my ADF 11 application using JDeveloper 11.1.1.0.0. Users, roles and grants all appear to be working as expected. However, I have discovered that server errors no longer appear once I put security in place.
For example, take a simple JSPX page with one button, and attach an actionListener to the button. In the actionListener, throw an exception. When no ADF security is in place, this results in a 500 server error page, and the exception stack trace (or part of it) is written to the Weblogic console inside JDeveloper. Once ADF security is in place, the behavior changes. The result is a blank page (absolutely no content). Even worse, the exception stack trace is no longer written to the Weblogic console.
I have tried to work around this by setting an <error-page> in web.xml, but it doesn't seem to make a difference. I do know that my <error-page> configuration works in general, because I have a "not authorized" error page set up to catch the ADF AuthorizationException, and that is displayed properly. I have also seen the error page invoked for errors that happen earlier in the rendering process (for instance, if I forget to set a default page in my bounded task flow).
I don't have any idea where to start on this. Google hasn't been much help, possibly I don't know what I'm looking for.
Anyone have any suggestions?
Thanks,
KEN

We have found a solution to this problem, which we are going to go with until something better pops up.
In the main unbounded task flow (adfc-config), we added a method call marked as the error-handler. In the method call, we log the exception, something like this:
    public void handleException() {
        Exception e = ControllerContextImpl.getInstance().getCurrentViewPort().getExceptionData();
        e.printStackTrace(System.err);
    }Then, the method call forwards to a JSP to display the error:
<af:inputText label="Error" value="#{controllerContext.currentViewPort.exceptionData.message}"/>That gets us the equivalent of the old behavior.
I still find it kind of strange that errors aren't displayed once security is enabled, but at least there is a workaround.
KEN

Security in Receiver SOAP Adapter (Axis Framework)

Hi Experts,
I have one requirement regarding Security in Receiver SOAP adapter
My client wants UserNameToken security while sending synchrononus messages from SAP system to third party.
Is anyone knows how to achieve this in AXIS framework(Receiver SOAP adapter) of PI 7.0 ?
Thanks in advance.
Regards
Anku

This is described in SAP Note 1039369 FAQ XI 3.0/7.0 Axis Adapter

Airport Extreme- PC users cannot connect to security enabled Wifi

I have an Airport Express and have setup a security enabled Wifi network. It works perfectly for me, but my PC user roomates cannot access it. I don't know much about the difference between WPA and other settings, so maybe I need to change the security. Please help. Thanks!

DrVenture:
Thank you. Yes, this did indeed work. The MacBook now connects just fine. I had one moment of panic when the Vista laptop referred to it as a "security key" rather than a passphrase / password, but I tried it anyway and that worked just fine too. So I'm happy again.
Any idea why WEP doesn't work this time?
Thank you for your help.
Message was edited by: JTeagle

Connect to Azure SQL DB with Security Enabled Access required using SSMS

I'm looking to connect to an Azure SQL DB with Security Enabled Access required using SQL Server Management Studio 2014. I have tried checking off "Encrypt connection", but still errors out with "Cannot open database 'db name' on server 'hostname'
requested by the login. Access to the database is only allowed using a security-enabled connection string."
Thanks,
Scott

Hi Scott,
Sorry, I missunderstood your initial question and the documentation I referenced is not updated appropriately. You have to change the connection string to <server-name>.database.secure.windows.net when you enable the security/auditing features.
Documentation for this can be found
here
Thanks,
Jan

OWSM SAML Verify step problem: Missing Security Header in SOAP message

I'm having a problem with SAML steps. From gateway log:
2008-09-17 13:21:32,987 INFO [HTTPThreadGroup-58] saml.InsertSAMLSVStep - User attributes map set to generate the attribute assertions: null
2008-09-17 13:21:33,034 INFO [HTTPThreadGroup-60] saml.SAMLProcessor - Assertion Major Version :1 , Minor Version :1
2008-09-17 13:21:33,034 WARNING [HTTPThreadGroup-60] saml.SAMLProcessor - SAML Assertion verification error: An invalid token was provided
2008-09-17 13:21:33,034 WARNING [HTTPThreadGroup-60] saml.VerifySAMLStep - SAML Token verification failed:
2008-09-17 13:21:33,096 SEVERE [HTTPThreadGroup-58] wssecurity.OSDTWSSecurity - Missing Security Header in SOAP message
2008-09-17 13:21:33,096 WARNING [HTTPThreadGroup-58] wssecurity.SecurityBaseStep - Failure while applying XML Security
FAULT CODE: InvalidSecurity FAULT MESSAGE: Missing WS Security header in the SOAP message
at com.cfluent.policysteps.security.wssecurity.OSDTWSSecurity.decryptVerify(OSDTWSSecurity.java:369)
at com.cfluent.policysteps.security.wssecurity.DecryptStep.performXmlSecurity(DecryptStep.java:131)
at com.cfluent.policysteps.security.wssecurity.SecurityBaseStep.execute(SecurityBaseStep.java:238)
at com.cfluent.pipelineengine.container.DefaultPipeline.executeStep(DefaultPipeline.java:124)
but the wsse:Security header with SAML assertion IS confirmed in the incoming message log. Anybody seen this issue?

Below is the log of the incoming message just prior to the failing SAML Verify step:
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://exception.common.periop.gehc.com" xmlns:ns1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:ns2="http://www.patient.patientmanager.periop.gehc.com/service/" xmlns:ns3="http://entity.common.periop.gehc.com" xmlns:ns4="http://entity.patient.patientmanager.periop.gehc.com" xmlns:ns5="http://entity.allergy.patientmanager.periop.gehc.com" xmlns:ns6="http://pdo.domain.customizer.periop.gehc.com" xmlns:ns7="http://entity.cases.scheduler.periop.gehc.com" xmlns:ns8="http://entity.insurance.patientmanager.periop.gehc.com">
- <env:Header>
- <ns1:Security>
- <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="158RBY2QvCFPiTqdXYWh9A22" IssueInstant="2008-09-17T19:58:43Z" Issuer="GE" xmlns="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2008-09-17T19:58:13Z" NotOnOrAfter="2008-09-17T19:59:43Z" />
- <saml:AuthenticationStatement AuthenticationInstant="2008-09-17T19:58:43Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
- <saml:Subject>
<saml:NameIdentifier NameQualifier="www.ge.com" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">gowri</saml:NameIdentifier>
- <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</ns1:Security>
</env:Header>
- <env:Body>
- <ns2:getPatient>
<ns2:patientId>137115</ns2:patientId>
</ns2:getPatient>
</env:Body>
</env:Envelope>

Search itens with item level security enabled

Hi,
I have a page that "item level security" enabled.
I am doing a select to get itens...
How can I get only itens that current user have view permission?
select wv.title,
wvt.numbervalue,
wv.description,
'/pls/portal/url/ITEM/'||wv.guid link
from portal.wwv_things wv,
portal.wwv_thingattributes wvt
where wv.siteid = 271
and wv.itemtype = 'basefile'
and wv.subtype = 498194
and wv.active = 1
and wv.language = 'us'
and wv.id = wvt.masterthingid
and wv.siteid = wvt.siteid
and wvt.attributeid = 1354
and wvt.attribute_siteid = 0
and wvt.valuetype = 'number'
order by wv.title;

I found the view. Thanks
portal.WWSBR_ALL_ITEMS

Jdev11 unexpected severe error on graph preview when security enabled

Graphs on jdeveloper 11 are realy cool
The wizard to create them is very helpfull, especialy the preview tab that you can see the results
Yet when you are working on an application that is Security Enabled then when you click preview tab you always get:
An unexpected severe error has ocurred in Jdeveloper.
Anyone else using Graphs?
details:
[http://adfbugs.blogspot.com/2009/10/unexpected-error-on-graph-preview-when.html]

You didn't mention your JDev version.
But if you search Oracle support, you'll find an existing bug logged for this problem (for 11.1.1.5.0):
Search: NOT ABLE TO IMPORT SCHEMAS IN JDEVELOPER
in Oracle support...

A member was added or deleted to a security-enabled local group. (4732 and 4733)

Hi Team,
We are getting below alerts continuously. it is specifying that user is adding and removing from security group. But it is happening automatically and we've checked no one is performing such operation. And we read on some site it happened on domain controller
but also our share point farm server is not on domain controller. Please find the alert below and suggest what we should do so that we'll not get this alert again. Thanks in advance.
A member was added to a security-enabled local group.
Subject:
Security ID:
POSTEN\s-sharep_farm
Account Name:
S-ShareP_Farm
Account Domain:
POSTEN
Logon ID:
0x8a121
Member:
Security ID:
NETWORK SERVICE
Account Name:
Group:
Security ID:
BUILTIN\IIS_IUSRS
Group Name:
IIS_IUSRS
Group Domain:
Builtin
Additional Information:
Privileges

Hi Kamal,
Per my knowledge, SharePoint does not have the function to audit the changes in domain groups.
What is “From” email address of the alerts?
Please check if you have configured Windows System Resource Manager to send e-mail notifications when an event is logged firstly.
https://technet.microsoft.com/en-us/library/cc732728.aspx
And it seems that the System Center Operations Manager(SCOM) can set the alert for auditing the changes to the local group membership.
Please also check if you have installed SCOM and set rule to send the alerts in SCOM.
http://blogs.technet.com/b/nzdse/archive/2009/11/10/audit-alert-scenarios-system-center-operations-manager-opsmgr-2007-r2.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Security enabled distribution list in SharePoint

Hi All
How can we create a security enabled distribution list in ShrePoint 2010?
Does it means creating a SharePoint group with an Email ID and assign a permission to that group OR creating an Account in AD?.
If we assign an Email ID to that group in SharePoint whether that account will be created in AD automatically
Any Help on this would be highly appreciated
Regards
Mahesh

I got the answer for that,Here it is,
There is a distribution list you can see and use in outlook, but when you search for the same list in SharePoint it doesn’t show up in the people picker.
Chances are that the distribution list is not security enabled. This would need to be done by your domain administrator. He would need to change the ‘Group Type’ of the list from ‘distribution’ to ‘security’. Once this is done your SharePoint administrator
would need to run a profile import so SharePoint can pick up the change immediately (alternatively you can let SharePoint automatically pick it up during its scheduled AD crawl

Cannot Security Enable BEFW11S4 Router

I was given a cable modem and a router (BEFW11S4 vers 4) when I moved, as I was going to get cable wireless internet in my new place. I was able to set up the internet access with the cable modem and can set up wireless with the router as long as it's not security enabled. I can name the network, but as soon as I try to WEP encrypt (64 bit), I get kicked off of the connection and when I try to reconnect, I get a message that the network requires settings not present on my computer. I've had to reset the router about 4 times in 2 hours just to get wireless service in my apartment, but I would really like to have it secured. I called customer support, but was told that since the warranty expired on the router I'd have to pay to have them help me, so I'd like to try to fix this on my own if I can. I am currently able to send this because I am directly connected to my cable modem. I've tried to use the CD that came with the router to configure the router to the PC, but when I get to the part where you have to connect the PC to the router, it says that the router can't be found, and to make sure it's on or reset it. My computer uses Microsoft Vista operating system. Does anyone know how to handle something like this, or where to find instructions on how to handle it? Thanks

I think the first thing which you need to do is upgrade the firmware of your router. i think its a problem with the firmware of your Router. Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you re-configure all the settings on your Router then you can enable the security on your Router. I think this might solve the problem.

[svn] 1433: adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console , used when running on Websphere with administrative security enabled.

Revision: 1433
Author: [email protected]
Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
Log Message:
adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

Hi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu

What are all the dimensions that have security enabled by default?

Hi,
can any one tell - What are all the dimensions that have security enabled by default in planning application
Thanks,
Kumar

Accounts, Entity, Scenario, Version
Cheers
John
http://john-goodwin.blogspot.com/

Ws security enabled in soap

Similar Messages

Maybe you are looking for