WSA - Changing ip and gateway

Hi, did anyone try this changes?
WSA will have its ip changed including gateway.
Did anyone make it work without reloading the config or restore to factory default?
What will happened if im going to edit the config then replace only the ip address..
just asking

Kira,
As long as your client configuring the WSA and the WSA are on the same subnet, you can change the default gateway and then the WSA IP and you should have no problems, if you do it in that order.
You can also modify the config XML and load it back in, but this is an unsupported process.

Similar Messages

  • RDS and Gateway issues: Cannot get remoteapps to run without opening port 3389 on firewall

    I am testing the setup of a small RDweb server to host QuickBooks for some remote sales users (4 users). For the most part, I have everything installed on one virtual server (using 2012r2 "Quick Start" session host deployment with the additional
    Licensing and Gateway server roles added to the same server).
    Everything works excellent with one exception. External clients cannot launch published apps without having port 3389 open on the firewall, even with the gateway role installed and the 'Deployment Properties' set to use the gateway. They can properly connect
    to the RDweb site and view the published apps. The only way it works is open the firewall port (at which time I can disable the gateway or leave it configured and it works either way). Internally, everything works accordingly. I have followed the steps outlined
    on many sites and have combed though the forum here to no avail.
    Error received (summarized but is a well documented error):
    remote desktop can't connect to the remote computer: 1- Your user account is not listed (it actually is) or 2- You might have specified the remote computer in NetBios format . . etc.
    This is an existing SBS 2011 environment with additional virtual servers setup to host QuickBooks as outlined below:
    Current setup:
    Used Quick Start to install Remote Desktop Services in hosted sessions mode
    Installed the additional roles for Licensing and Gateway server on same server
    Configured wild card public certificates on all four services (Connection Broker(2), Web Access and Gateway)
    Configured internal DNS to properly lookup our external FQDN of this server (ex. quickbooks.contoso.com points to quickbooks.contoso.local
    One thing I noticed (just now) when I launch a published app and the firewall has port 3389 closed, a dialog box pops up directly after launching the app that warns about running a RemoteApp program and mentions the Remote Computer and the Gateway Server
    as both the same (which it is); however, I would have assumed one would have listed the internal server's name while, instead, both are listed as the external FQDN. Either way, internal DNS should still allow it to properly route . . no? I don't know . . I'm
    sure I am just missing something in a routing configurations somewhere. The gateway service is not properly looking up the RDweb service and then seeming not routing the encapsulated RDP session through HTTPS. . .. is my guess . .
    I was reading about the "set published name" commandlet; however, I am not experiencing a certificate name mismatch; however, the certificate name does show up as *.contoso.com versus the actual name. I may just be grasping as straws now . . :)

    Ok, while I was in the server and looking over the BPA scans: "The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name." This may be due to it showing up as *.companyname.com
    versus quickbooks.companyname.com. Anyhow. .. on to the list of actions above:
    Changed RD RAP from "Select Active Directory" group to "Allow any network resource" and tested with port 3389 closed on firewall:
    Worked. Initially it did not as I had used a custom shortcut created from earlier; however, after logging into the RDweb site again, the application loaded fine now (after the RD RAP change)
    No error message appeared; however, I did notice that for a split second, the word Error did appear in the browser's tab title, but only very shortly. The app launch does take a bit longer too now (about 10-15 seconds, up from about 4 seconds with the port
    open). This, I could care less about so long as we are properly forwarding the traffic through the gateway.
    As for log entries, I had spend quite a bit of time in there and only had minor issues with loading user profile setting taking too long and policy settings preventing the redirection of USB devices. Looking again, no issues still. Just a bunch of informational
    entries where I would connect before (and disconnect) but only with the port on the firewall open; otherwise, there was not an entry corrolating to when I would receive an error before. Now though, I am connecting after the RD RAP change and logs are showing
    connections even with the port closed. These are in "operational", the "admin" log only shows the update to the RD RAP configuration.
    Yes, the LAN's DNS server does relay the lookup information for my public FQDN as the local LAN address. No need for a local host record.
    I have now added a new rule in our firewall to allow and forward UDP port 3391 traffic to the internal server hosting remote services
    Thank you very much for your assistance on this matter. The RD RAP rule was default built during the creation of this services. Why is the resource not cross-referencing AD security groups? I could have sworn I created a group for that . . .

  • Weird DNS and GATEWAY IP Address

    iPad 1 and iPad 2, join wireless network, pulls 192.168.1.199 for a DNS and GATEWAY address, force a STATIC (manual) of 192.168.1.1 works, revert back to DHCP, keeps 192.168.1.1 until offsite and attempt to reconnect.
    Tried Renew Lease, still pulls 192.168.1.199, have to always force 1.1 and revert back to DHCP afterwards.
    Router has static IP (Cablevision), 255.255.255.248 Subnet with OPEN-DNS (208.67.222.222 and 208.67.220.220) Even if I use Cablevision, Google, Verizon DNS, always pulls a 1.199 IP for GW and DNS.
    Tried 3 different routers, still weird.
    Any ideas?

    I�ve recently installed Solaris v10 X86 and have two
    questions. The system is a Dell E521 with 4GB RAM
    and 1GB SysKonnect NIC, and internet is provided via
    a cable modem, that�s plugged into a Netgear router,
    and the Solaris 10 box is plugged into the Netgear
    router via a CAT5 ethernet cable.
    1. I can connect to my router login page using the
    following URL:
    http://192.168.1.1/start.htm and I can also connect
    to various web pages such as yahoo, if I first "ping
    yahoo.com" (on another machine that�s internet
    enabled) and then plug the web site�s ip address into
    the Solaris/Mozilla browser. So it appears that I
    haven�t been successful at pointing the Solaris x86
    at a DNS server to resolve the DNS name.You can either copy nsswitch.dns to nsswitch.conf, or you can modify nsswitch.conf so that 'dns' is used for hostname lookups.
    2. I've purchased a commercially available software
    package and it requires a static ip address for this
    Solaris x86 server. If the ip address changes, it�ll
    stop working by design and require that I reacquire
    the license file. When connecting through this
    Netgear router, how do I lock this Solaris v10 x86
    server into a specific ip address? (the ip address
    floats presently when cycling my PC�s on/off)
    presently, and assume the Solaris box will too,
    usually through an ip range of 192.168.1.<1 through
    5>One method is setting the router so that the server's MAC address is tied to a specific IP.
    Otherwise you can edit /etc/hostname.<interface> and place a static address there, forgoing DHCP services from the router. You may want the address to appear outside the router's DHCP range.
    Darren

  • Transports and gateway

    What is the relation between transports and gateway? We had an issue with STMS today. The import queue wont show up and the process would hang forever. redistributing TMS also didnt work. but when we killed the gateway process(unix level) on some systems it worked.
    I dont understand the relation though.
    Can someone help.
    Thanks
    Cyrus

    Hi Cyrus,
    A transport domain consists of all the SAP systems that
    have certain same system configuration settings.
    Now there exists a reference configuration on the
    transport domain controller, which is one SAP system with
    all the other systems in the domain taking copies of this
    reference configuration. Each time change is made in this
    reference configuration, it has to be distributed to all
    the other SAP systems in the domain, in the form of transports.
    A SAP Gateway acts as a bridge between the SAP system and
    external program/system, useful for data communication.
    Hence we can conclude that for distribution of the
    reference configuration from the controller to other SAP
    systems, we need a SAP Gateway for communicating between
    the systems. That should be the relation between gateway and transport.
    For more info:
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/94fc3f8fc2c542e10000000a1550b0/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/bb/9f13dc4b9b11d189750000e8322d00/frameset.htm
    Hope it helps..
    Regards
    Srikishan

  • Webinar: Change Management and Transport in the Enterprise Portal

    <b>SAP NetWeaver Know-How Network Webinar: 
    Change Management and Transport in the Enterprise Portal
    Wednesday 21 July 2004
    11 a.m. EDT</b>
    On Wednesday 21 July, Scott Jones hosts the webinar titled <b>Change Management and Transport in the Enterprise Portal</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
    Here’s how Scott describes his webinar presentation:
    “Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments.  This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting.   We'll also look forward to Change Management enhancements coming with Netweaver 04.”
    SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
    <b>How to Participate</b>
    (Please go to the SDN Events page to see the article and download the PDF presentation)
    Dial-in Information:
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Within the U.S., call: +1.888.428.4473
    Outside the U.S., call: +1.651.291.0618
    Password: NetWeaver04
    WebEx Information:
    Topic: SAP NetWeaver Know-How Network
    Date: Wednesday 21 July 2004
    Time: 11 a.m. EDT
    Meeting Number: 742391500
    Meeting Password: netweaver04 (lowercase)
    WebEx Link: sap.webex.com
    Replay Information:
    A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
    Toll-free: +1.800.475.6701
    International: +1.320.365.3844
    <b>About the SAP NetWeaver Know-How Webinar Series</b>
    The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
    <b>Disclaimer</b>
    SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

    Hello,
    In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
    SAPnote 727180 - Version of PAR File in Manifest File
    denies this.
    Can you clear this out?
    Kind Regards
    Koen Van Loocke

  • How to change header and footer in login page in oracle apps r12

    Hi all,
    how to change header and footer in login page in oracle apps r12 and login button background color, please help me
    thanks
    saran

    how to change header and footer in login page in oracle apps r12 and login button background color, please help meTips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
    How to Personalize Login page in R12? [ID 579917.1]
    R12 Login Page: How to Personalize the Logo ? [ID 849752.1]
    Thanks,
    Hussein

  • Change header and footer in one jsp impact on all jsps

    If i change header and footer in one jsp page it show reflect the changes in all jsps can any one help me .

    Manually i shd not change in all jsp pages.Once if
    i change in particular page then all pages shd be
    e reflected with the changesyes, my previous reply does the same way you want.
    You have to include (use include directive) your header & footer jsp file in other jsp pages where you wanted them. And once you do any change in header & footer jsp it will automatically effect other jsp.
    Follow the link if you dont know how to use include directive
    http://javaalmanac.com/egs/javax.servlet.jsp/include.jsp.html?l=new

  • Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto

    Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto.   I get the following error message:  
    Some import operations were not performed.
    The following files were not imported because they could not be read  [followed by a list of the files I wanted to import]
    Thumbnails show up.  LR just will not import them.
    Any idea what is going wrong?

    If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
    So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
    Click on All Photographs in the Catalog Panel on the left of the Library Module
    Turn off all Filters (Ctrl-L or Cmd-L once or twice)
    Expand all stacks: Photo->Stacking->Expand All Stacks
    Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

  • How do I change font and colors back to default?

    I have changed the font and color of the text through the tools button and the options button and the content tab. I find nothing telling me how to change the font and colors back to default font and colors. Can you advise me? I'm using Windows 7 Home Premium OS. Thanks.

    Hi Brenda19605,
    You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a&s=font&r=0&as=s
    The default settings for the font are in this article:
    https://support.mozilla.org/en-US/kb/Some%20text%20shows%20up%20bold%20after%20upgrade
    Unfortunately for the default colors has no good reference. But for text it is black (most lower left) color, background is white (most upper left color). Unvisited links is blue (column 8, row 5) and visited link is purple (column 9, row 5).
    Let me know if you need anymore help!
    Lordfreak

  • My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID.  If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Want to change payer and update credit limit data with out delete documents

    Hi Expert,
    I have a problem that user feed 50-60 documents ( Sale order & delivery ) with wrong payer. Now we want to change payer and shift credit limit data ( open sale order , open delivery ) from old payer to new payer is any option for this.
    Thanks in advance
    Regards
    Suresh Kumar

    Hi
    Ideally in your case, you may have to delete the delivery documents and then recreate the deliveries after updating the payer in the sales order. This is because the source for the partner function in Delivery will be mostly updated as "from sales order" and hence it is not possible to change the payer in the delivery document.
    In this case, you have to first find out the relevant delivery documents and delete them
    Then you can change the partners in the sales order
    Finally you can recreate the delivery documents.
    However I would request you to do the following test before following this.
    In the SO, change the payer without deleting the delivery. If the partner in delivery gets changed automatically then it is fine. You can ensure this by checking the delivery in DISPLAY mode.
    If payer is not changing automatically then go to delivery in CHANGE mode and now check it. If the payer changes automatically now, you are spared with the pain of deleting and recreating deliveries once again.
    If both of them fails, then the only way is to delete deliveries first, change payer in SO and then recreate deliveries.
    This is applicable only if PGI is not yet done.

  • My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    Hi hectorness12!
    Thanks for using the Apple Support Communities! I have found an article that can help you with troubleshooting your iMessage issue. The article can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks,
    Braden

  • I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

    I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
    Why after 6 year's this has changed?
    I would like to open PDF's straight from Window Mail.

    Good day Jeff.
    I am running most current Adobe Reader X.
    Tks Mark

  • Before every time I use to open a new tab it comes as top site. Now not anymore and instead is an automatically website calle Only Search. I went to Safari preference I change everything and when I quit Safari all the changes are gone.

    Every time I used to open a new tab it comes as top site. Now not anymore , instead it open in a website called Only Search, I went to safari preferences and made all changes but after I quit Safari and open again all changes are gone. I can not change anything and new tab comes by it self with other website.

    There is no need to download anything to solve this problem.
    You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the support article, you may also need to remove this item in the same way:
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • On my windows Itunes I changed computers and ended up with two of every song. How do I delete the duplicates without doing it one at a time?

    I have duplicates of all the songs on my windows 7 computer.  I changed computers and ended up with duplicates of all of my songs. How can I delete them all without having to do it one at a time? thanks!

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

Maybe you are looking for