Wscompile warning ignoring port ... no SOAP address

Hi, all
I'm trying to run wscompile from wsdl file to get the client binding and getting the above message. The wsdl is too large to place here. All I can say is the SOAP address is specified for the PORT element with valid URL. Here is the fragment of it:
<service name="C3MortgageService">
- <port binding="tns:C3MortgageBinding" name="C3MortgagePort">
<soap:address location="http://tsta.net.na.abnamro.com:3001/CICS/CWBA/DFHWSDSH/ABNWSDSP" />
</port>
</service>
The error message is:
warning: ignoring port "C3MortgagePort": no SOAP address specified
warning: Service "C3MortgageService" does not contain any usable ports
Does anyone have any idea?
I'd appreciate any suggestions/comments/tips?
Thanks a lot.

I know you said the WSDL is large but could you try to prune it down to a point where it still generates the same error, then post it here in the forum. Thanks.

Similar Messages

Warning: ignoring port "AshHlcMemMntcSOAP": no SOAP address specified

I'm running wsimport from the Sun 1.6 jdk. I'm getting the following message and I don't know why.
Can anyone make some suggestions?
Thanks in advance,
F
[WARNING] ignoring port "AshHlcMemMntcSOAP": no SOAP address specified. try running wsimport with -extension switch.
line 181 of file:/C:/users/xxx/ATV/AshHlc-WS/10-10%20Jax-WS%20Working/AshHlcMemMntc.wsdl
[WARNING] Service "AshHlcMemMntc" does not contain any usable ports. try running wsimport with -extension switch.
line 178 of file:/C:/users/xxx/ATV/AshHlc-WS/10-10%20Jax-WS%20Working/AshHlcMemMntc.wsdl
Portion of file. First line is number 178:
<wsdl:service name="AshHlcMemMntc">
<wsdl:port
binding="tns:AshHlcMemMntcSOAP"
name="AshHlcMemMntcSOAP">
<soap:address
location="http://localhost:9080/mms/services/AshHlcMemMntc" />
</wsdl:port>
</wsdl:service>

I was able to solve my problem! I had a bad URL in my namespace definitions and that was messing everything up. I with the error message was more informative...
Bad: xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap"
Good: xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
Note the missing last slash. That was all...
F

Oracle Reports jax-ws webservice on https port shows soap address on http

- there is a Oracle Reports jax-ws webservice
- it is working fine on http port
- but on https port the wsdl show the soap address location still on http . Shouldnt it be https port ?
Is there anything end user / webservice developer can do to fix this. then we can contact Oracle Reports webservices developer with the suggestions
https://host:8890/reports/rwwebservice?wsdl
<soap:address location="http://host:8890/reports/rwwebservice"/> # http
TIA

- there is a Oracle Reports jax-ws webservice
- it is working fine on http port
- but on https port the wsdl show the soap address location still on http . Shouldnt it be https port ?
Is there anything end user / webservice developer can do to fix this. then we can contact Oracle Reports webservices developer with the suggestions
https://host:8890/reports/rwwebservice?wsdl
<soap:address location="http://host:8890/reports/rwwebservice"/> # http
TIA

Wscompile No SOAP address specified

I have seen this same post over and over again. I haven't seen a single real answer for it. SO here we go again.....
warning: ignoring port "HelloHttpGet": no SOAP address specified
warning: ignoring port "HelloHttpPost": no SOAP address specified
these are the errors. I read a bug article based on this, but it was in regards to a .Net project and not a java one.
I would assume that if those ports were ignored, my project won't work, so i really really need to figure this out.
here is my config.xml
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="Hello.wsdl"
packageName="com.c2bmc"/>
</configuration>
and here is my wsdl
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/" xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.openuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.openuri.org/">
<types>
<s:schema elementFormDefault="qualified" targetNamespace="http://www.openuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="getPlanList">
<s:complexType>
<s:sequence/>
</s:complexType>
</s:element>
<s:element name="getPlanListResponse">
<s:complexType>
<s:sequence>
<s:element name="getPlanListResult" type="s:string" minOccurs="0"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="string" nillable="true" type="s:string"/>
</s:schema>
</types>
<message name="getPlanListSoapIn">
<part name="parameters" element="s0:getPlanList"/>
</message>
<message name="getPlanListSoapOut">
<part name="parameters" element="s0:getPlanListResponse"/>
</message>
<message name="getPlanListHttpGetIn"/>
<message name="getPlanListHttpGetOut">
<part name="Body" element="s0:string"/>
</message>
<message name="getPlanListHttpPostIn"/>
<message name="getPlanListHttpPostOut">
<part name="Body" element="s0:string"/>
</message>
<portType name="HelloSoap">
<operation name="getPlanList">
<input message="s0:getPlanListSoapIn"/>
<output message="s0:getPlanListSoapOut"/>
</operation>
</portType>
<portType name="HelloHttpGet">
<operation name="getPlanList">
<input message="s0:getPlanListHttpGetIn"/>
<output message="s0:getPlanListHttpGetOut"/>
</operation>
</portType>
<portType name="HelloHttpPost">
<operation name="getPlanList">
<input message="s0:getPlanListHttpPostIn"/>
<output message="s0:getPlanListHttpPostOut"/>
</operation>
</portType>
<binding name="HelloSoap" type="s0:HelloSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="getPlanList">
<soap:operation soapAction="http://www.openuri.org/getPlanList" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<binding name="HelloHttpGet" type="s0:HelloHttpGet">
<http:binding verb="GET"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<http:urlEncoded/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<binding name="HelloHttpPost" type="s0:HelloHttpPost">
<http:binding verb="POST"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<mime:content type="application/x-www-form-urlencoded"/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<service name="Hello">
<port name="HelloSoap" binding="s0:HelloSoap">
<soap:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpGet" binding="s0:HelloHttpGet">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpPost" binding="s0:HelloHttpPost">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
</service>
</definitions>
Thanks for anyone who takes the time to help.
Jason

I have seen this same post over and over again. I haven't seen a single real answer for it. SO here we go again.....
warning: ignoring port "HelloHttpGet": no SOAP address specified
warning: ignoring port "HelloHttpPost": no SOAP address specified
these are the errors. I read a bug article based on this, but it was in regards to a .Net project and not a java one.
I would assume that if those ports were ignored, my project won't work, so i really really need to figure this out.
here is my config.xml
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="Hello.wsdl"
packageName="com.c2bmc"/>
</configuration>
and here is my wsdl
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/" xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.openuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.openuri.org/">
<types>
<s:schema elementFormDefault="qualified" targetNamespace="http://www.openuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="getPlanList">
<s:complexType>
<s:sequence/>
</s:complexType>
</s:element>
<s:element name="getPlanListResponse">
<s:complexType>
<s:sequence>
<s:element name="getPlanListResult" type="s:string" minOccurs="0"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="string" nillable="true" type="s:string"/>
</s:schema>
</types>
<message name="getPlanListSoapIn">
<part name="parameters" element="s0:getPlanList"/>
</message>
<message name="getPlanListSoapOut">
<part name="parameters" element="s0:getPlanListResponse"/>
</message>
<message name="getPlanListHttpGetIn"/>
<message name="getPlanListHttpGetOut">
<part name="Body" element="s0:string"/>
</message>
<message name="getPlanListHttpPostIn"/>
<message name="getPlanListHttpPostOut">
<part name="Body" element="s0:string"/>
</message>
<portType name="HelloSoap">
<operation name="getPlanList">
<input message="s0:getPlanListSoapIn"/>
<output message="s0:getPlanListSoapOut"/>
</operation>
</portType>
<portType name="HelloHttpGet">
<operation name="getPlanList">
<input message="s0:getPlanListHttpGetIn"/>
<output message="s0:getPlanListHttpGetOut"/>
</operation>
</portType>
<portType name="HelloHttpPost">
<operation name="getPlanList">
<input message="s0:getPlanListHttpPostIn"/>
<output message="s0:getPlanListHttpPostOut"/>
</operation>
</portType>
<binding name="HelloSoap" type="s0:HelloSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="getPlanList">
<soap:operation soapAction="http://www.openuri.org/getPlanList" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<binding name="HelloHttpGet" type="s0:HelloHttpGet">
<http:binding verb="GET"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<http:urlEncoded/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<binding name="HelloHttpPost" type="s0:HelloHttpPost">
<http:binding verb="POST"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<mime:content type="application/x-www-form-urlencoded"/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<service name="Hello">
<port name="HelloSoap" binding="s0:HelloSoap">
<soap:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpGet" binding="s0:HelloHttpGet">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpPost" binding="s0:HelloHttpPost">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
</service>
</definitions>
Thanks for anyone who takes the time to help.
Jason

How to configure the sort and port of a SOAP address dynamically

Hi All,
In the wsdl we have the SOAP Address defined but in practice we would like to configure the host and the port. As the server on which the service resides may/will change.
For example:
http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
We would like to configure the proxy to point to say:
http://<host>:<port>//sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
What we see in the Proxy Code is:
port.setSOAPAddress(new com.sap.flex.ws.runtime.SOAPAddress("http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003"));
How could this be achieved.
Please help.

Hi Sumit,
Thanks for the quick response. However, I do not want to change the host and the port in the wsdl. I want it to be so, that it will pick the host and port dynamically(as you have mentioned). However, in out case, the web service has the SOAP address hardcoded as <b>http://usciq74.wdf.sap.corp:50077</b>.
We would want to write something as http://host:port and then let it pick the host and port dynamically. How is that possible.
Best Regards,
Debashree.

Xrpcc : Help, Warning ignoring the operation.

Hi,
I built wsdl file and tried to compile it to generate stub and ties.
After few corrections, the compile went thru with a warning:
warning: ignoring RPC-style operation "GetLastTradePrice": parameters are not encoded
I will appreciate any help.
Regards,
Sam
below is the WSDL file:
----------------------------------<?xml version="1.0"?>
<definitions
name="stockquote"
targetNamespace="http://quote.com/stockquote.wsdl"
<types>
<xsd1:schema targetNamespace="http://quote.com/stockquote.xsd"
xmlns:xsd1="http://www.w3.org/2001/XMLSchema">
<xsd1:element name="TradePriceRequest" type="Request">
<xsd1:complexType name="Request">
<xsd1:all>
<xsd1:element name="tickerSymbol" type="xsd:string"/>
</xsd1:all>
</xsd1:complexType>
</xsd1:element>
<xsd1:element name="TradePrice" type="Response">
<xsd1:complexType name="Response">
<xsd1:all>
<xsd1:element name="price" type="xsd:float"/>
</xsd1:all>
</xsd1:complexType>
</xsd1:element>
</xsd1:schema>
</types>
<message name="GetLastTradePriceInput">
<part name="body" element="xsd1:TradePriceRequest"/>
</message>
<message name="GetLastTradePriceOutput">
<part name="body" element="xsd1:TradePrice"/>
</message>
<portType name="stockquotePortType">
<operation name="GetLastTradePrice">
<input message="tns:GetLastTradePriceInput"/>
<output message="tns:GetLastTradePriceOutput"/>
</operation>
</portType>
<binding name="stockquoteSoapBinding" type="tns:stockquotePortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetLastTradePrice">
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<soap:operation soapAction="http://quote.com/GetLastTradePrice"/>
</operation>
</binding>
<service name="stockquoteService">
<documentation>My first service</documentation>
<port name="stockquotePort" binding="tns:stockquoteSoapBinding">
<soap:address location="http://localhost:8080/stockquote"/>
</port>
</service>
</definitions>

With RPC encoding style, you must use SOAP section 5 encoded parameters.
try
<soap:body use="encoded"/>
instead of
<soap:body use="literal"/>

Changing location specified using soap:address

Hi there,
How can i change the webservice host address which is shown in wsdl file (in IE).
This tag is under <service name......
what i know is that the wsdl file is generated automatically then how to change that host address in <host address....
example :
<service name="Service">
<documentation>Interface. Version 2.0</documentation>
- <port name="Service" binding="tns:Service">
<soap:address location="http://mynet.tk.com:11001/webapp/webservices/mpp20" />
</port>
</service>
The question is from where it automatically forms the url like...
<soap:address location="http://mynet.tk.com:11001/webapp/webservices/mpp20" />
I am using bea Weblogic for deployment.
Thanks,

Hi all,
I have found now a bit tricky way to solve this after investigating in jax-ws and tomcat source code...
on external proxy server you have to use apache2 as a reverse proxy with the modules mod_proxy, mod_rewrite and mod_headers activated.
In your configuration for your virtual hosts (below only shown for Port 443) you have to set ProxyPreserveHost to On (to set external hostname in proxied request), further you have to modify request header to set the right port, external used:
for example with following directive "RequestHeader set Host externalhost:443".
HTTPS requests you have to route to internal server on second port 8082, HTTP requests you have to route, as usually, on port 8080, look at the directives ProxyPass and ProxyPassReverse as shown below.
On tomcat server you have to enable second port 8082 with "wrong" settings enabled: scheme="https" and secure="true"
the webservices are now able to show the right scheme, too, external used.
Possible configuration of apache2 virtualhosts:
<IfModule mod_ssl.c>
#NameVirtualHost *
<VirtualHost *:443>
        ServerName externalhost:443
        ServerAdmin webmaster@localhost
        Protocol https
        UseCanonicalName On
        DocumentRoot /var/www/
        ErrorLog /var/log/apache2/error-ssl.log
        SSLEngine On
         # Possible values include: debug, info, notice, warn, error, crit,
         # alert, emerg.
         LogLevel warn
         CustomLog /var/log/apache2/access-ssl.log combined
         ServerSignature On
         <IfModule mod_proxy.c>
            #turning ProxyRequests on and allowing proxying from all may allow
            #spammers to use your proxy to send email.
            ProxyRequests Off
            <Proxy *>
                  AddDefaultCharset off
                 Order deny,allow
                 #Deny from all
                 #Allow from .example.com
                 Allow from all
            </Proxy>
            # Enable/disable the handling of HTTP/1.1 "Via:" headers.
            # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
            # Set to one of: Off | On | Full | Block
            ProxyVia Off
            ProxyErrorOverride Off
            ProxyPreserveHost On
            <IfModule mod_headers.c>
               <Proxy *>
                  RequestHeader set Front-End-Https On
                  RequestHeader set Host externalhost:443
               </Proxy>
            </IfModule>
            ProxyPass                /ws-foo/ http://internalhost:8082/ws-foo/
            ProxyPassReverse /ws-foo/ https://externalhost:443/ws-foo/
         </IfModule>
</VirtualHost>
</IfModule> Configuration of tomcat: <tomcat-base>/conf/server.xml:
    
    <Connector URIEncoding="utf-8" acceptCount="100"
               connectionTimeout="20000"
               disableUploadTimeout="true" enableLookups="false"
               maxHttpHeaderSize="8192" maxSpareThreads="75" maxThreads="150"
               minSpareThreads="25" port="8080" redirectPort="8443"/>
    <Connector URIEncoding="utf-8" acceptCount="100"
               connectionTimeout="20000"
               disableUploadTimeout="true" enableLookups="false"
               maxHttpHeaderSize="8192" maxSpareThreads="75" maxThreads="150"
               minSpareThreads="25" scheme="https" secure="true"
               port="8082" redirectPort="8443"/>Hope, that helps you all - this had cost me a lot of time... ;-)
Regards.

Change SOAP Address Location in the WSDL

When deploying a BPEL service the SOAP Address location is automatically generated to have the
http://{SERVER}:{PORT} of the SOA server where you are deploying the service but i need to have a different address location.
I basically needs this because we have a load balancer and firewall restrictions for any external third party that want to invoke our service.
So the WSDL URL we give to the third party who want to invoke our service will be
https://loadbalancer/orabpel/default/TestService/1.0/TestService?wsdl
instead of
http://soasever:soaserveport/orabpel/default/TestService/1.0/TestService?wsdl
The loadbalancer will then strip of the https connection and send it as http request to the SOA server.
So the third party is now able to access the WSDL but he is having issues while invoking the service as the SOAP address location is still having our SOA server name
Any ideas?

This can be achieved through dynamic partner linking.
http://download.oracle.com/docs/cd/E19509-01/821-0017/cnfg_bpel-se-dynamic-ptnrlink_c/index.html
HTH
-ND

Invalid soap address, unknown protocol jms

Hi, All,
I try to create a web service project based on a WSDL which soap based on JMS as following:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="AsyncBusiness"
     targetNamespace="http://www.alsb.com/AsyncBusiness/"
     xmlns="http://schemas.xmlsoap.org/wsdl/"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
     xmlns:tns="http://www.alsb.com/AsyncBusiness/"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <types>
          <xsd:schema targetNamespace="http://www.alsb.com/AsyncBusiness/"
               xmlns:order="http://www.alsb.com/order/">
               <xsd:import namespace="http://www.alsb.com/order/"
                    schemaLocation="order.xsd" />
               <xsd:element name="submitOrder" type="order:Order" />
          </xsd:schema>
     </types>
     <message name="submitOrder">
          <part element="tns:submitOrder" name="submitOrder" />
     </message>
     <portType name="AsyncBusiness">
          <operation name="submitAsyncOrder">
               <input message="tns:submitOrder" />
          </operation>
     </portType>
     <binding name="AsyncBusinessSOAP" type="tns:AsyncBusiness">
          <soap:binding style="document"
               transport="http://www.openuri.org/2002/04/soap/jms" />
          <operation name="submitAsyncOrder">
               <soap:operation
                    soapAction="http://www.alsb.com/AsyncBusiness/submitOrder" />
               <input>
                    <soap:body parts="submitOrder" use="literal" />
               </input>
          </operation>
     </binding>
     <service name="AsyncBusiness">
          <port binding="tns:AsyncBusinessSOAP" name="AsyncBusiness">
               <soap:address
                    location="jms://192.168.48.1:7001/AsyncOrderSelf_WS/AsyncBusiness?URI=jms.WebServiceQueue" />
          </port>
     </service>
</definitions>
the problem is when I generate web service based on that, error found: invalid soap address, unknown protocol jms. How can I make it work?
I'm using workshop 10.3 for weblogic. Thanks in advance.
Best Regards,
Bill
Edited by: Bill Cao on May 20, 2009 11:13 AM

Bill,
Soap Address should always should be standard.
But you can change the action type under the wls binding part
for example I will provide one sample and it work perfectly at my end.



<wsdl:binding name="SampleJMSSoapBinding" type="invws:SamplePort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/jms" />
<wsdl:operation name="DeleteParty">
<soap:operation soapAction="http://xmlns.oracle.com/communications/webservice/DeleteParty" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
<wsdl:fault name="InventoryFault">
<soap:fault name="InventoryFault" use="literal" />
</wsdl:fault>
<wsdl:fault name="ValidationFault">
<soap:fault name="ValidationFault" use="literal" />
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>



<wsdl:service name="Sample">
<wsdl:port name="SampleHTTPPort" binding="invws:SampleHTTPSoapBinding">
<soap:address location="http://localhost:7001/Sample/SampleHTTP" />
</wsdl:port>
<wsdl:port name="SampleJMSPort" binding="invws:SampleJMSSoapBinding">
<soap:address location="jms://localhost:7001/Sample/SampleJMS?URI=inventoryWSQueue" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
let me know whether this will help any where.
Regards,
Kal.

Exception setting SOAP address to $CHANGE-WHEN-DEPLOY$:

Am trying to call the Credit Rating Service using the 10.1.2 version of BPEL engine using the JDeveloper Designer. Have no problems calling the Credit Rating Service through the console tester but when my BPEL process called SynchBPELProcess2 calls the credit rating service I get the following error:
Your test request generated the following exception/fault:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=exception setting SOAP address to $CHANGE-WHEN-DEPLOY$: no protocol: $CHANGE-WHEN-DEPLOY$; nested exception is:
     java.net.MalformedURLException: no protocol: $CHANGE-WHEN-DEPLOY$}}
Is there some additional configuration that needs to be done to get around this or am I missing a step somewhere. Ran into this while going step by step with the Order booking tutorial and so decided to try with a separate project.
BPEL File Attached below:

<process name="SynchBPELProcess2" targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:ns1="http://services.otn.com" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:client="http://xmlns.oracle.com/SynchBPELProcess2" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink name="client" partnerLinkType="client:SynchBPELProcess2" myRole="SynchBPELProcess2Provider"/>
<partnerLink name="CreditRatingService" partnerLinkType="ns1:CreditRatingService" partnerRole="CreditRatingServiceProvider"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:SynchBPELProcess2RequestMessage"/>
<variable name="outputVariable" messageType="client:SynchBPELProcess2ResponseMessage"/>
<variable name="invokeCR_process_InputVariable" messageType="ns1:CreditRatingServiceRequestMessage"/>
<variable name="invokeCR_process_OutputVariable" messageType="ns1:CreditRatingServiceResponseMessage"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="client" portType="client:SynchBPELProcess2" operation="process" variable="inputVariable" createInstance="yes"/>
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload" query="/client:SynchBPELProcess2ProcessRequest/client:input"/>
<to variable="invokeCR_process_InputVariable" part="payload" query="/ns1:ssn"/>
</copy>
</assign>
<invoke name="invokeCR" partnerLink="CreditRatingService" portType="ns1:CreditRatingService" operation="process" inputVariable="invokeCR_process_InputVariable" outputVariable="invokeCR_process_OutputVariable"/>
<reply name="replyOutput" partnerLink="client" portType="client:SynchBPELProcess2" operation="process" variable="outputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="invokeCR_process_OutputVariable" part="payload" query="/ns1:rating"/>
<to variable="outputVariable" part="payload" query="/client:SynchBPELProcess2ProcessResponse/client:result"/>
</copy>
</assign>
</sequence>
</process>
WSDL Attached below :
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="SynchBPELProcess2"
targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/SynchBPELProcess2"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema attributeFormDefault="qualified"
               elementFormDefault="qualified"
               targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2"
               xmlns="http://www.w3.org/2001/XMLSchema">
               <element name="SynchBPELProcess2ProcessRequest">
                    <complexType>
                         <sequence>
                              <element name="input" type="string"/>
                         </sequence>
                    </complexType>
               </element>
               <element name="SynchBPELProcess2ProcessResponse">
                    <complexType>
                         <sequence>
                              <element name="result" type="string"/>
                         </sequence>
                    </complexType>
               </element>
          </schema>
     </types>
     
     <message name="SynchBPELProcess2RequestMessage">
          <part name="payload" element="client:SynchBPELProcess2ProcessRequest"/>
     </message>
     <message name="SynchBPELProcess2ResponseMessage">
          <part name="payload" element="client:SynchBPELProcess2ProcessResponse"/>
     </message>
     
     
     <portType name="SynchBPELProcess2">
          <operation name="process">
               <input message="client:SynchBPELProcess2RequestMessage" />
               <output message="client:SynchBPELProcess2ResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="SynchBPELProcess2">
          <plnk:role name="SynchBPELProcess2Provider">
               <plnk:portType name="client:SynchBPELProcess2"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>

Lasts monday I downloaded a version (10.1.2 release, not preview/beta 3) which has the same filename and file size of the 10.1.2 GA release which is available right now.
I don't think the problem is in the PM, because i can run bpelc/obant to build my processes. however when i build them with the Eclipse plugin, it won't change the location of the wsdl (keep saying $CHANGE_WHEN_DEPLOY$).

JMS transport - weblogic changes soap:address location="jms:.. to http

Hi,
Please help me to configure web service to use only jms transport.
I try to create web service that uses JMS transport.
I started from WSDL where I placed two elements:
<soap:binding style="document"
transport="http://www.openuri.org/2002/04/soap/jms" />
and
<soap:address location="jms://host:7041/contextPathName/serviceUriName?URI=queueName" />
Then in web service implementation I placed following annotation:
@WLJmsTransport(contextPath = "contextPathName", serviceUri = "serviceUriName", portName = "portName", queue = "queueName", connectionFactory = "connectionFactoryName")
Deployment is successful but when I look at generated WSDL (Admin console) I see that weblogic has changed <soap:address location="jms:.. to <soap:address location="http....
And when I look at monitoring I see that port is using JMS transport.
When I try to test my service using Admin console Test client I see that the queue is not used (Admin console/monitoring/Messages total is still 0) and service uses (I suppose) http transport.

Hi,
Please change "http://www.openuri.org/2002/04/soap/jms" to http://www.openuri.org/2002/04/soap/jms/ for soap1.1 or http://www.openuri.org/2002/04/soap12/jms/ for soap1.2.
There must be some mismatch between edoc and implementation.
-LJ

How is wsdl generated? Wrong soap:address...

We're using Apache in front of WLS and when the WSDL is generated for the service (i.e. from http:/URL/Service.jws) is contains a soap:address with port=80 instead of port=443 as it should.
This is a workshop generated jws.
I'm wondering how this soap:address in the generated WSDL is constructed. It must be some combination of wlw-runtime-config.xml, frontend host, etc. So far we haven't been able to find the right combo to make it work.
Thanx,
Max

If the WSDL file is a workshop generated one, then the soap:address port number must be the same as your Apache/WLS development server's port number when the WSDL file was generated. You will need to update it during the production move to point to your production server port.
<service name="MyService">
<port name="MyserviceSoap" binding="s0:MyServiceSoap">
<soap:address location="http://localhost:80/ctx/MyService.jws"/>
</port>
</service>

[9.2] WebServices and soap:address - problem with exported EAR

I 've created a top-down web service from a wsdl file.
The soap address in the orginal wsdl file is
<soap:address location="https://localhost:7002/SITWebServices"/>
The soap address in the wsdl file that Workshop create in WebContent/wsdl is:
<soap:address location="http://localhost:10014/SITEmulator92/services/SITWebServicesPort"/>
Locally I can run test Web Services both here:
http://localhost:10014/SITEmulator92/services/SITWebServicesPort
and here:
http://localhost:7001/SITEmulator92/services/SITWebServicesPort
(port 10014 is another port which appears in Web Service Explorer)
and it works.
But when I export EAR file and deploy it on a server (ex: http://myserver.com ) I don't know what is the URL of the web service.
I tried:
http://myserver.com:10014/SITEmulator92/services/SITWebServicesPort
http://myserver.com:7001/SITEmulator92/services/SITWebServicesPort
and others... but there is no web service there.
Moreover, why the web service doesn't appear in the Web Service list under the deployed EAR (Weblogic console) ?
Thanks
Andrea
Edited by pacionet at 08/24/2007 5:31 AM

The problem was very silly: I forgot to include the libraries in the export options (Project -> Properties -> Java Build Path -> Check all the libraries).
The URLs now work.

Dynamically set the soap address for web services

Hi,
I am developing an Oracle J2ee1.3 web service for Oracle application server 10.1.2.
The web service needs to be deployed on to multiple servers. Hence the host and port for the soap:address needs to be changed for each server.
Eg: For the 1st server the soap:address is http://www.server1.com/test/MyWebService
For 2nd server the soap:address is http://www.server2.com/test/MyWebService
Is there any way to dynamically change this address based on the server the Web Service is deployed to?
Any help is highly appreciated.
Thanks,
Subashini

It helps to post a link to a thread when you refer to it. If you are trying to implement that solution though, you can look at the parameter of the corresponding method being called. The parameter has type 'SIMPLE' which means that it is compatible with all of the predefined elementary ABAP types. In this case, you should use 'STRING'.

Webservices soap address location url update

Hi,
Is there any way to change the soap address location in the wsdl?
I tried by changing the frontendport and host,But I don't have any option for updating the protocol(http/https) option in weblogic.
advance thanks

Thank you very much,
I followed the same document for updation of endpoint,these settings only updating the host and port ,not the frontend access protocol. End points are generated properly if both the proxy and internal app server mapping uses the same protocol.
Weblogic always using the application server protocol instead of proxy protocol.
Example:wsdl accessed from proxy with https and the internal mapping is http.
https://proxy:443/xxx/xxx?wsdl--->http://appserver:7001/xxx/xxx?wsdl--->web servies end point is http://proxy:80/xxx/xxx?wsdl but the expected endpoint is
https://proxy/xxx/xxx?wsdl.
thanks for providing any other advices

Wscompile warning ignoring port ... no SOAP address

Similar Messages

Maybe you are looking for