Xrpcc : Help, Warning ignoring the operation.

Hi,
I built wsdl file and tried to compile it to generate stub and ties.
After few corrections, the compile went thru with a warning:
warning: ignoring RPC-style operation "GetLastTradePrice": parameters are not encoded
I will appreciate any help.
Regards,
Sam
below is the WSDL file:
----------------------------------<?xml version="1.0"?>
<definitions
name="stockquote"
targetNamespace="http://quote.com/stockquote.wsdl"
<types>
<xsd1:schema targetNamespace="http://quote.com/stockquote.xsd"
xmlns:xsd1="http://www.w3.org/2001/XMLSchema">
<xsd1:element name="TradePriceRequest" type="Request">
<xsd1:complexType name="Request">
<xsd1:all>
<xsd1:element name="tickerSymbol" type="xsd:string"/>
</xsd1:all>
</xsd1:complexType>
</xsd1:element>
<xsd1:element name="TradePrice" type="Response">
<xsd1:complexType name="Response">
<xsd1:all>
<xsd1:element name="price" type="xsd:float"/>
</xsd1:all>
</xsd1:complexType>
</xsd1:element>
</xsd1:schema>
</types>
<message name="GetLastTradePriceInput">
<part name="body" element="xsd1:TradePriceRequest"/>
</message>
<message name="GetLastTradePriceOutput">
<part name="body" element="xsd1:TradePrice"/>
</message>
<portType name="stockquotePortType">
<operation name="GetLastTradePrice">
<input message="tns:GetLastTradePriceInput"/>
<output message="tns:GetLastTradePriceOutput"/>
</operation>
</portType>
<binding name="stockquoteSoapBinding" type="tns:stockquotePortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetLastTradePrice">
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<soap:operation soapAction="http://quote.com/GetLastTradePrice"/>
</operation>
</binding>
<service name="stockquoteService">
<documentation>My first service</documentation>
<port name="stockquotePort" binding="tns:stockquoteSoapBinding">
<soap:address location="http://localhost:8080/stockquote"/>
</port>
</service>
</definitions>

With RPC encoding style, you must use SOAP section 5 encoded parameters.
try
<soap:body use="encoded"/>
instead of
<soap:body use="literal"/>

Similar Messages

  • Help me please (THE operation could not be completed )

    hi. i tried to watch a live channel by safari. if i use normal pc i can see it but when i use mac book pro i can't.i am a new user of mac book so not enough idea. i installed flip 4 mac as-well to convert the window media file for mac. but still its not working. when ever i tried it to open . it opened by quick time player and then few seconds that msg appears.so help me to solve that problem please.
    thanks

    hi
    @ sig accutually that site is a foreign news channel.both link in below:
    http://www.somoynews.tv/
    or
    http://www.somoynews.tv/ltv.php
    @ds  not working. i installed perian but still same. do i need to do any thing with the quick time ?

  • WINRM error : The WinRM client cannot complete the operation within the time spe cified

    Dear All
    Please find
    We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
    In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
    But this error on specific sles host will halt the executing workflow .
    This workflow will working successfully after couple of intervals and again the error coming up.
    Although the workflow is halting by the mentioned error a  task that used the same module is working fine without any error on that host and
    This workflow is running on other instances of the discovered class correctly
    (on SLES hosts sles11 and sles10 64bit) .
    Error :
     The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and  firewall
    exception for Windows Remote Management service is enabled. Error number:  -2144108250 
    The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
    service is enabled.
     Linux host :
    SLES 10 32 bit
    SP2

    Hi,
    Any error or warning for the operation manager log under event viewer?
    Based on my research,
    Possible Causes for this issue:
    The host is unreachable due to incorrect name resolution, network outage, or
    host outage
    A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
    Resolutions
    Verify that Management Server can ping the agent host by Fully-Qualified
    Domain Name
    Verify that no network firewalls or host firewall is blocking TCP port 1270
    In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
    OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
    http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • You can ignore the battery warning

    This is half an implied question and half a PSA.
    For more than 5 years my MacBook Pro has been giving me a warning in the menu bar that says "Condition: Replace Soon".
    When it first started the battery life was still OK. Now after 5+ years it's less than perfect but still quite good. I called Apple when it first happened as well and they got some data (about battery cycles) and wouldn't replace the battery.
    Clearly, the warning is a bug in Mac OS X and I wanted to help the community by suggesting that if someone has this issue they should first ignore it for, say, 4 or 5 years. Of course I'd try Apple first in case it's under warranty.
    In short, don't sweat the "Replace Soon" warning on your battery.

    Both times, when mine gave that warning, the battery quite soon swelled up enough to cause problems with the trackpad operation. A quick search will find a number of cases where permanent damage was caused.
    It's great that yours has been OK, but that's not always the case.

  • I can no longer access Safari on my ipad. I get the error:the operation couldn't be completed. Cannot allocate memory. Help please!

    I am not able to access Safari on my ipad. I get the error message: The operation couldn't be completed. Cannot allocate memory. Can anyone help please??

    Try this first.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work, reboot the iPad - or quit all apps and restart.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.

  • Ignore errors in the Operator steps

    Hi
    Is there a way to ignore errors in an Operator task step without checking "Ignore Errors" box located on the Definition tab of that step? So far the only way I can run it is to check that box and execute the interface by right clicking the Operator task and selecting rerun, but that way I can't schedule it.. Thanks for you help..

    Hi,
    In your interface,go to Control tab give 100% in Maximum number error allowed.
    I am not sure whether this is what you are looking for.
    Thanks,
    Guru

  • [svn:fx-4.0.0] 13468: (commit on behalf of Hans): The following ASyncListView methods now ignore IPEs thrown when the operation is delegated : 'get length()', addItem(), addItemAt(), setItemAt().

    Revision: 13468
    Revision: 13468
    Author:   [email protected]
    Date:     2010-01-12 15:59:25 -0800 (Tue, 12 Jan 2010)
    Log Message:
    (commit on behalf of Hans): The following ASyncListView methods now ignore IPEs thrown when the operation is delegated: 'get length()', addItem(), addItemAt(), setItemAt().
    QE notes:
    Doc notes:
    Bugs: sdk-24975
    Reviewer: Alex
    Tests run:
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/sdk-24975
    Modified Paths:
        flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/collections/AsyncListView.as

    Dear Pallavi,
    Very useful post!
    I am looking for similar accelerators for
    Software Inventory Accelerator
    Hardware Inventory Accelerator
    Interfaces Inventory
    Customization Assessment Accelerator
    Sizing Tool
    Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
    Request help on such accelerators... Any clues?
    Any reply, help is highly appreciated.
    Regards
    Manish Madhav

  • Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

    Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

    Maybe some help here:
    http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • HT201210 i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Can't find any discussions on this.  Suddenly cannot stream video in Safari or Chrome on my iPad 2.  The error is "The operation could not be completed."  Rebooted cable modem and router, no luck.  No problem with my PC.  Help!

    Suddenly I cannot stream video on my iPad 2.  I get the error, "The operation cannot be completed."  The browser (Safari or Chrome) continues to try to load the video with no result.  I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem.  I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck.  (How do you do a "hard reset", I forgot?)  Frustrating since I don't own a TV and am an Al Jazeera addict!  Help!

    Suddenly I cannot stream video on my iPad 2.  I get the error, "The operation cannot be completed."  The browser (Safari or Chrome) continues to try to load the video with no result.  I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem.  I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck.  (How do you do a "hard reset", I forgot?)  Frustrating since I don't own a TV and am an Al Jazeera addict!  Help!

  • Error help- "the operation could not be performed ...file... doesn't exist"?

    Hi,
    I am experiencing some probmels with ICE and can't find a reason for why.  I was able to edit the pages on the site through ICE about a month ago, but the client just let me know they can't do anything for any page.  I also can't do anything for any pages I was able to previously edit.  Basicall, I get this error message after being able to log in, edit page, and click save draft/ changes I get the following error:
    "The operation could not be performed because the file can't be accessed or doesn't exist..."
    I have looked extensively at these threads: http://forums.adobe.com/thread/444356?tstart=60
    and http://forums.adobe.com/thread/432559?tstart=0
    From that I have tried the following:
    Made sure passive FTP was working properly
    Verified FTP Dreamweaver connection with same FTP account: all is good and i can change and put the pages in question on the server.
    Verified tags in page (I think I have most pages correct.- although I know some are still not div tagged correct, but don't think thee issues are related.)
    verified that the directory settings on the adobe account (which is the root) is only "/"
    Tried editing in both Safari and FF and the client tried in IE and FF (all most recent versions I think)
    No progress has been made.  Actually now my adobe account for managing my sites is not allowing me to manage "settings" for this site either.  The tab is there but doesn't have the word settings on it and therefore I can't click it anymore
    Here is the site: www.extremecommunitymakeover.org.  I know for sure I WAS able to edit the index, get involved, and contact us pages a moth ago and now I get the error.
    Also- another maybe related problem is that I can't actually duplicate or create new pages via ICE.  Everything I try to name the new page gets kicked back and the dialog box says error says the "file extension is invalid".
    So- I seem to have a couple problems possibly all related to each other and your help would be much appreciated.
    Thanks,
    Sean

    Here's the setup on the two machines in particular...
    Machine #1:
    XP Pro
    Was IE7, now latest FF
    No antivirus
    Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
    Machine #2:
    XP Pro
    IE7
    Again, No AV… had Kaspersky… but uninstalled it
    Windows Firewall
    Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
    ....STUMPED!!!   

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Maybe you are looking for