WSUS 3.0 SP2 on Server 2k8 R2 getting Error 364 and 10032

This is a FRESH installation of Server 2008 R2, installed with SP1 (no updates applied from Windows Update - I want this to happen via WSUS)
WSUS 3.0 SP2 FRESH installation from standalone installer.
Installed KB2720211 to correct the issue of clients being unable to communicate with WSUS server.
WSUS installs fine, synchronizes fine, but a number of updates showing "The Microsoft Software License Terms for this update failed to download"
Many other updates report the download failed with REASON: HTTP 404 The requested URL does not exist on the server.
Throughout the last 2 days of researching and investigating these particular errors, I have performed the following steps:
Verify correct permissions for the drive and folders - no change
wsusutil reset - no change
wsusutil checkhealth - Reports WSUS working correctly
Uninstalled and reinstalled WSUS 3.0 in full
Removed server from any and all firewall and ISA devices, turned off the internal Windows Firewall completely - no change
Reinstalled Server 2008R2 again from scratch, installed WSUS again from scratch - no change
WSUS and Server 2008R2 configurations are identical to a previous installation that was working perfectly, and is NOT using a proxy.

In my research on this issue I have encountered a number of posts mentioning this, although none of them specified v3.2.
Given that the patch only applies to WSUS v3.2, to do so would be notably redundant. :-)
Is the KB2734608 applicable to WSUS 3.0 as well?
You seem to be confused by nomenclature.
"WSUS 3.0" == WSUS v3 RTM (released Spring 2007)
"WSUS 3.1" == WSUS v3 SP1 (released Summer 2008)
"WSUS 3.2" == WSUS v3 SP2 (released October 2009)
Nonetheless, the patch only applies to WSUS v3 with Service Pack 2, aka WSUS v3.2.
I am hesitant to say that maybe an upgrade to 3.2 may fix the issue
Since you can only install WSUS v3.2 on a Windows Server 2008 R2 server, this is really a non-issue.
I added the WSUS role within the server manager rather than from the standalone installer.
This was probably a key differentiator. I'm curious why you used the standalone installer to begin with.
I should mention, during the server installation, I also did a full factory reset on the router, and reconfigured it accordingly.
I'm still inclined to believe this had the most significant impact on your download failures.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Yea, in looking around further I figured out that the 3.2 was a reference to 3.0 SP2. I went ahead and added that patch and lost the ability to synchronize period. At that point I just wiped everything again and am back up and running.
I used the standalone installer as the server role had originally failed and was unusable in the original installation. I stayed with the standalone installer as I had thought it may have been updated from the version included in the 2k8 R2. I now know otherwise.
I was still able to use the wizard to start with, which allowed the server manager to add the necessary required roles and services, but would ultimately fail in installing the WSUS role. This time it all worked like a charm, so I went with it.
As for the router, it may have been the culprit, although prior to the initial server reformat, the previous WSUS installation was working perfectly, about an hour prior to the completion of the the format and the installation and configuration of the WSUS
server.
Either way, thanks for the help and the clarifications on some of the items for me.

Similar Messages

WSUS 3.0 SP2 master server cross-forest migration impacts

    Hello to all, I'm preparing a cross-forest migration and have one WSUS 3.0 SP2 master on source forest placed in root domain. This master has 16 replicas scattered among child source domains. As I plan do migrate member servers using MS
tool named ADMT 3.2 and considering that I will firstly migrate just root domain member servers to target forest, I need to know:
   1- Will WSUS 3.0 SP2 master server work after it's migrated from source to target forest? I mean: can all its replicas still access and donwload the necessary patches from it? Will its configuration be in place (groups, schedules, etc) ?
   2- Should I need to change source domain clients WSUS GPOs to point to the just migrated master server (new FQDN name)?
   3- Is possible to change my just migrated WSUS 3.0 SP2 to be replica from a master server already present on target forest? How this move could affect its existing replicas still present on source forest?
   Suggestion and attention points will be appreciated.
   Regards, EEOC.

1- Will WSUS 3.0 SP2 master server work after it's migrated from source to target forest? I mean: can all its replicas still access and donwload the necessary patches from it? Will its configuration be in place (groups, schedules, etc) ?
Fundamentally yes, as long as the downstream servers are updated to use the new hostname and DNS properly resolves that hostname. NOTE: You cannot "migrate" the WSUS role using ADMT. What is your plan for "migrating" the WSUS upstream server?
2- Should I need to change source domain clients WSUS GPOs to point to the just migrated master server (new FQDN name)?
Probably. Presumably the hostname and IP Address of the server are going to change.
3- Is possible to change my just migrated WSUS 3.0 SP2 to be replica from a master server already present on target forest?
Yes, but that's kind of a cart-before-the-horse move... which brings us back to the original question: How do you plan to "migrate" the upstream server?
How this move could affect its existing replicas still present on source forest?
Well.. it will introduce a three-tier replication hierarchy for starters, which will slow everything down by one or two days. But, really, I wouldn't worry about that because there's no real need to do this.
Suggestion and attention points will be appreciated.
Install a *NEW* WSUS server in the target forest.
Configure it as a replica of the existing master in the source forest.
Replicate.
When the replication is complete, reconfigure it as an Upstream Server and RESET the Product Category and Update Classifications to what they should be.
Synchronize with Microsoft.
When that sync is successful, enabled regular synchronizations.
Configure clients and downstream servers to sync from the new upstream server in the target forest.
When all clients and downstream servers are working with the new server, turn off the old one.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

WSUS 3.0 SP2 on Server 2008 R2 not working (no console or other access)

Hi,
In a brand new network with all 2008 R2 servers I setup WSUS. Initially I could not install the role from the Roles tool in Windows and had to install it from a downloaded file from Microsoft (which I later read is due to 2008 R2).
This ran fine for about 2 weeks, I had all the clients and workstations in groups, approving updates and installing them.. all tickety boo and then one day the console wont connect and I have not been able to get back into WSUS to do anything. I tried removing
and re-installing WSUS (both keeping the local database and then deleting it the second time) but nothing helps. My event log reports the following every 6 hours:
Event ID 13042 - Self-update is not working
Event ID 12002 - The reporting web service is not working
Event ID 12012 - The API Remoting Web Service is not working
Event ID 12032 - The Server Synchronization Web Service is not working
Event ID 12022 - The Client Web Service is not working
Event ID 12042 - The SimpleAuth Web Service is not working
Event ID 12052 - The DSS Authentication Web Service is not working
Some extra points based on what I have read:
The server DOES have .net 4.0 installed
WSUS has been removed and re-installed
All servers are 2008 R2
The server also runs Remote Desktop Services.. but aside from this is just a file and print server
Because this server (and the whole network) are brand new, standard practice is to run WSUS against the Microsoft update site and install all critical and optional updates and patches and etc..
While it was working, I can't recall installing anything that may have broken it, however typically Windows patches do not cause problems on our machines, so I do not pay too close attention to what gets installed.. Perhaps one of these updates broke WSUS?
Can anyone offer some suggestions for how to troubleshoot this and try get things moving again?
Thanks!

Hi,
> then one day the console wont connect and I have not been able to get back into WSUS to do anything.
Any error message when you launch WSUS console?
You mentioned you have Kaspersky Endpoint Security software installed on WSUS server, have you configured antivirus software to exclude WSUS content directory?
If you cannot access the WSUS console and a timeout error message appears, the CPU of the WSUS server may be at, or very close to, maximum utilization, which causes the database software to time out. If the database software times out, the WSUS console cannot
be displayed.
One way of inadvertently overtaxing your WSUS server is to have antivirus software monitor the WSUS content directory. During synchronization, the antivirus software can overload the CPU.
Please ignore WSUS content in your antivirus software and check the result.
For more information please refer to following MS articles:
Issues with the WSUS 3.0 SP2 Administration Console
http://technet.microsoft.com/en-us/library/dd939877(v=WS.10).aspx
The DSS Authentication Web Service is not working.
http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/c901eb7b-7c20-4fb8-87dd-93f128ec8703
WSUS web services not working
http://social.technet.microsoft.com/Forums/en/winserverwsus/thread/5b443a1c-01eb-4b73-ad06-03700032bec2
Lawrence
TechNet Community Support

SCCM 2012 on Server 2012 and WSUS 3.0 SP2 on Server 2008

We are installing SCCM 2012 SP1 fresh into our development environment - the primary site server and the database (SQL 2012) are both being installed on Server 2012.
We have an existing WSUS box on a Windows 2008 (not R2) server - the WSUS server version is 3.2.7600.256. We have set this up as the software update point.
For the purposes of this discussion, these are the server names (obviously obfuscated):
Primary site server: sccm.domain.local
Database server: sccmdb.domain.local
WSUS server: wsus.domain.local
On the primary SCCM server, I've installed the WSUS user interface (Install-WindowsFeature -Name UpdateServices-UI), in order to work with the remote WSUS server.
Updates synchronization appears to be working fine, but when I try to setup client distribution via SUP, I'm getting the following error in the Application event log:
Log Name:      Application
Source:        SMS Server
Date:          8/6/2013 11:03:11 AM
Event ID:      6613
Task Category: SMS_WSUS_CONFIGURATION_MANAGER
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      sccm.domain.local
Description:
On 8/6/2013 11:03:11 AM, component SMS_WSUS_CONFIGURATION_MANAGER on computer sccm.domain.local reported: WSUS Configuration Manager failed to publish client boot-strapper package "9D5353E5-DA80-48C3-97DE-C9C528F73A2D" with version "5.00.7804.1000"
to the Software Updates Point.
As well as this in the WMC.log:
PublishApplication(9D5353E5-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013
11:03:11.787+240><thread=3704 (0xE78)>
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013 11:03:11.803+240><thread=3704 (0xE78)>
It would seem obvious that this is because of a mismatch in versions between the WSUS server version on wsus.domain.local, compared to the UpdateServices UI on sccm.domain.local.
Is there a way around this, without having to upgrade the WSUS server to Server 2012?
Thanks for any thoughts you may have!

Not really. As mentioned though, even the separate WSUS server is probably overkill. In ConfigMgr, WSUS is used to handle the update catalog and that's it. Clients do *not* report status to the WSUS instance and do *not* download updates from the WSUS instance.
No management is ever done in WSUS.
So, in reality, once a month, clients connect to WSUS to download the delta update catalog (delta compared to what they currently have) which usually comes out to about a few hundred KB (yes KB, not MB) -- this download is done via BITS. The server also
syncs the catalog from the WSUS instance, via the SUP, in a similar fashion. If you are using SCEP, the frequency will be greater, but the deltas will be much smaller.
EULAs, as needed, are also stored in WSUS and accessed by clients -- these are also quite small only a select few updates requires them.
That's it. Standing up a dedicated WSUS instance means having a server sitting there doing almost nothing else.
If you are concerned about load on the site server, then you should create a separate site system that contains the MP, SUP (and WSUS instance), and DP. Then, for HA purposes, you can simply build a second site system with these three roles also and HA will
essentially be automatic (from a client functionality perspective).
Jason | http://blog.configmgrftw.com

Upgrading to CS6 on Mac Mini Server. Keep getting errors.

My computer
Mac mini Server - Mid 2011
Software Mac OS X Server Lion 10.7.3 (11D50b)
Processor 2 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
I keep getting errors when I tried to upgrade to CS6 from CS3 extended.
Error report says:
Exit Code: 15
0 Fatal errors, 2 errors, 0 warnings
error: ASU has quit unexpectedly.
error: Media DB error : 18
Please help.
I even uninstall original CS4, install CS3 extended and try to upgrade. still getting errors.
HELP HELP HELP. SOS

How do you go to safe mode in mac? I created a new user and tried to instal but it still doesn't work. Anyone encountered such a problem?

I cant access my bank account since having firfox always get error message and it now says retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 does anyone know what i need to change thanks

i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation

Installing Exchange 2010 on Server 2008 R2 Get error with Hub Transport Role

Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
        " was run: "Installing product D:\Program Files\Microsoft SQL Server\Microsoft\Exchange Server\V14\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.".
Installing product D:\Program Files\Microsoft SQL Server\Microsoft\Exchange Server\V14\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
Fatal error during installation
Elapsed Time: 00:00:01
Client Access Role
Cancelled

Hi,
From the description, I recommend you copy the Exchange installation files to the local machine, or download a fresh copy of Exchange 2010 and then reinstall it.
Besides, please ensure that you install Exchange 2010 on 64-bit edition of Windows Server 2008 R2 Standard with SP1 or Windows Server 2008 R2 Enterprise with SP1.
If the issue persists, please refer to the following KB further troubleshooting.
You receive error 1603 when you try to install the Exchange Server 2010 RU1
https://support.microsoft.com/kb/981474
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

There was a problem connecting to the server. - Keeps getting error message.

Eversince I updated my iMac to 10.7.3 I get this message every 5 minutes.
"There was a problem connecting to the server.
That server was gone for almost 1 month now.
I have checked Login items, launchdaemons, startup items pretty much gone to every website and I cannot get this error message go away.
Please help..

That server was Microsoft Server 2003.
My users used that server and to access our resources files and folers.
But, I retired that server 1 month ago and all of the sudden her iMac just trying wanted to connect to that server.
I have also clear her history of server by just going to command+k and clear history servers.

Cannot save Premiere Pro CS6 project to our server. Keep getting error message.

We have just replaced/renewed all of our workstations and server. PC. Started using the Adobe Creative Cloud subscription service. Absolutely love the software BUT we have one rather big problem I can't figure out...When we create a new project in Premiere it keeps popping up with this error message: "Could not open the project file with write access. The file may be locked or you may not have permission to write to this location. Select 'Save As' from the File menu to save the project to a new location". Our IT consultant has double checked and made sure that all of our workstations have full write access to the server. At this stage, Premiere is only letting us save our projects to an external hard drive or on the workstation hard disk. This is not satisfactory. We need to be able to save to the server. Has anyone come across this problem? Thanks in advance to anyone who can help me out.

As far as I know, you can't do what you want
No current version of Premiere works properly, if at all, over a network
-see #3 http://forums.adobe.com/thread/771151
-you may NOT "map" your My Documents folder to a network drive
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-#5 Server 2008 is UNsupported http://forums.adobe.com/thread/851602
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
http://www.adobe.com/aboutadobe/pressroom/pressreleases/201304/040413AdobeAnywhere.html
-launched at NAB 2013... final availability expected some time in 2013

Ical responds with "The server responded with an error." and crashes. How can I fix it?

The messages continues to send info to Apple. Ical will not stay open long enough and will not allow me to make any changes. My password on google has changed but I do not know how to change it in Ical. Is this just something I will never be able to use again?

Sorry, no help there. Ical does not stay open long enough to do anything with. All it does is crash and apologise and say it will notify Apple.
Guess I will just delete it altogether and use google calendar.

WSUS 3.0 SP2 not installing on Server 2008

Hi
I'm trying to install WSUS 3.0 SP2 on Server 2008 SP2.
During the install I am told that IIS and the required roles must be installed before set up can continue. I have confirmed that all of the pre-requisites listed below are installed on this server;
Microsoft Internet Information Services (IIS) 7.0. Ensure that the following components are enabled:
Windows Authentication
ASP.NET
6.0 Management Compatibility
IIS Metabase Compatibility
The installer still tells me that IIS or it's required components are not installed properly.
Is there anything else that I need to check in relation to this error message?
Thanks in advance.

> Is there anything else that I need to check in relation to this error message?
Perhaps the WSUS 3.0 SP2 Deployment Guide, in the section Configure IIS?
I don't see "Static Content", "ISAPI Extensions", or "ISAPI Feature" listed in the citation you provided, and I'm not sure what it is you're citing to get that list of components for IIS 7.0, but it doesn't match anything that's ever been officially documented for WSUS v3 in the Deployment Guide.
In the Select Role Services window, make sure that the following services are selected:
Common HTTP Features (including Static Content)
ASP.NET, ISAPI Extensions, and ISAPI Features (under Application Development)
Windows Authentication (under Security)
IIS Metabase Compatibility (under Management Tools, expand IIS 6 Management Compatibility)
Lawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com

WSUS 3.2 SP2 with KB2720211 and later KB2734608 rebuilt as WSUS 6.3.9600.16384. Will clients connect back OK after initial Sync to parent server?

Hello all, after many iteration of trying to fix 11 DSS running Windows 2008 R2 WSUS 3.2 SP2 sync issues with parent USS, we have decided to gradually move towards WSUS 6.3.9600.16384 on Windows 2012 R2.
I have already built a Windows 2012 R2 WSUS server (which will eventually replace the current 2008 R2 WSUS 3.2 SP2 master server) The sync is OK. There was no error on the data base side or anything.
The idea now is to gradually pick one DSS, rebuild it with Windows 2012 R2 WSUS service, and sync it with newly built and to be main primary server. The fact that I actually picked up a working WSUS 3.2 and rebuilt it with WSUS 6.3, will the clients still
talk back and connect? Or this version uses totally different update engine..in that case, how is it all going to work?
Shahidul

The fact that I actually picked up a working WSUS 3.2 and rebuilt it with WSUS 6.3, will the clients still talk back and connect?
Theoretically, yes; but in practicality, probably not.
Almost certainly your original WSUS v3 server was installed to the Default Web Site (port 80). WSUS v6 servers default to their own v-root on port 8530, so at a minimum you will need to reconfigure the GPO that tells the clients where to find their WSUS
Server. However, once you do that, the clients will register automatically.
The second part of this question relates to target groups.
If you're using Client-Side Targeting and you've created the groups on the new WSUS Server, the clients will automatically register in their policy-assigned groups.
If you're using Server-Side Targeting, you'll have to use the console to reassign the clients from "Unassigned Computers" to their correct target group(s).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Getting error while starting Managed Server

Hi All,
I configured Custered environment in Weblogic 9.2 to use in ALSB.
While starting managed server i am getting error :
<Critical> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666363188> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:941)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000365> <Server state changed to FAILED>
####<Feb 3, 2009 6:36:04 PM IST> <Error> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364234> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Feb 3, 2009 6:36:04 PM IST> <Notice> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364594> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Feb 3, 2009 6:36:04 PM IST> <Info> <WebLogicServer> <punitp46462d> <new_ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1233666364891> <BEA-000236> <Stopping execute threads.>
Can anybody pls guide me to solve this erro.
Thanks,
Kartheek

This statement should be prominently displayed in this and all similar forums, but the best advice I can give anyone here is that if you're struggling with a problem for several DAYS, not to mention weeks, and the only resource you've used is this forum, you should file a support request with Oracle right now. That is one of the most important skills you will need to use WebLogic effectively.

WSUS 3.0 SP2 on Server 2k8 R2 getting Error 364 and 10032

Similar Messages

Maybe you are looking for