WSUS 3.2 on Server 2008 R2 with SQL 2012 STD

Hi
I have a Windows 2008 Server R2 with SQL server 2012 STD on it, his is a VM(hyper v) and not connected to the internet machine.
I want to install the WSUS Role on it an it fails every time..
When installing the Role it fails with this error:
"he update could not be found. there may be a network connection issue."
I tried installing it using the installation .exe from Microsoft website
and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again.Internet Information Services (IIS) or additional IIS role service
must be installed.
please refer to windows server update services 3.0 sp2 release notes for more information about prerequisites"
I must point that IIS IS INSTALLED and running on this server.
Does anyone knows how to solve this problem?
Thank you!!

I want to install the WSUS Role on it an it fails every time..
While not directly related to your situation, it's important to note that SQL2012 is
not a supported platform for WSUS v3.2. Be sure to install with the Windows Internal Database instead.
When installing the Role it fails with this error:
"The update could not be found. there may be a network connection issue."
The key here is in understanding HOW the WSUS role gets installed on a Server 2008 R2 system. The binaries used to install the role are NOT present on the OS image, they must be either downloaded from the Internet or obtained from another WSUS server with
the Dynamic Installer approved.
My guess would be that this system does not have Internet access. If you don't have another operational WSUS server, then this system will need to have Internet access to download the required binaries from MU, or else you'll need to download the standalone
installer and install it manually.
I tried installing it using the installation .exe from Microsoft website and also faild with this message:
"Windows server upate services 3.0 sp2 setup cannot continue. please resolve the following issues, and the run the setup again. Internet Information Services (IIS)
or additional IIS role service must be installed.
I must point that IIS IS INSTALLED and running on this server.
Ahhh.. was it previously installed for some other application. Have you *verified* that it is installed in a configuration that is compatible with WSUS?
HINT: WSUS is, fundamentally, an IIS6/ASP.NET v2 application. My first guess would be that your existing installation of IIS7.5 does not have the IIS6 components enabled.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

SQL 2000 LINKED SERVER ERROR 7303 WITH SQL 2012 ON WINDOWS SERVER 2012 R2

Hi all,
I have a problem with SQL Server 2012 and a linked server for SQL 2000 database.
System specification:
Windows server 2012 64 bit
SQL SERVER 2012 64 bit
REMOTE SERVER SQL 2000 32 bit
I've installed sql native client 32bit,create a SYSTEM DSN odbc connection with "SQL Server" driver named "MYSERVER".
Create a linked server with the query below in SQL 2012:
EXEC master.dbo.sp_addlinkedserver @server =N'MYSERVER', @srvproduct=N'MYSERVER', @provider=N'MSDASQL', @datasrc =N'MYSERVER', @location=N'System';
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'MySERVER',@useself=N'True',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL
GO
but when i browse the linked server i receved error 7303.

You need 64-bit MSDASQL. It is the bitness of the server you are connecting from that matters. 64-bit executables cannot hook into 32-bit DLL.
However, I suspect that you will not get things to work anyway. At least I have not seen anyone this far who has been able to set up a linked server from SQL 2012 to SQL 2000. I know that when I tried this, the following providers had this result:
SQLNCLI11 - does not support connections to SQL 2000.
SQLNCLI10 - failed with some obscure message that I don't recall.
SQLNCLI - Don't recall that the problem was here.
SQLOLEDB - SQLOLEDB is always replaced with the most recent version of SQLNCLI, so this fails because of lack of support.
I don't think I got through all version of the ODBC drivers, though.
Erland Sommarskog, SQL Server MVP, [email protected]

Mouse not working in Virtual machine (win2k3 32 and 64 bit) on Windows Server 2008 RC1 With Hyper-V Technologies

I have installed two virtual machines(win2k3 32bit and win2k3 64bit ) on Windows Server 2008 RC1 With Hyper-V Technologies (Beta) enterprise. Mouse is getting lost inside VM (using CTRL+ ATL + LEFT ARROW comes mouse control control in host OS).
Is there any setting to make mouse works? Insert Integration Serice setup Disk operation succeeds.

all credits for mike_something
The problem is that the old mousedriver is hooked to the mouse device class.
To remove this dependency, go into the registry and navigate to the key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E96F-E325-11CE-BFC1-08002BE10318}
Remove the value msvmmouf from the UpperFilters Regvalue.
Reboot....
tadaaa!!
If you wish you can take out the drivers completely by deleting these registry hives completely :
The driver:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\msvmmouf
The Service:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\VPCMap
The CopyHook Shell Extension: ( for folder access )
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{30C14BA C-122C-42ED-B319-1139DBF48EB8}\InProcServer32
HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandle rs\VPCCopyHook
After a reboot you can delete the "Virtual Machine Additions" folder from program files...
Good Luck!

[Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
Analysis
Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report:
Figure 1.
In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
Produces
You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
1. Upgrade to Windows Server 2012 with a GUI mode
1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
2) Select the operating system you want to install with a GUI mode.
We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
Figure 2.
Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
Figure 3.
After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
Figure 4.
2. Switch the GUI mode to Server Core
Method 1: Using Server Manager
1) Open Server Manager, click
Manger and select “Remove Roles and Features” to start the
Remove Roles and Features Wizard.
2) In Features,
uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
Figure 5.
Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
Figure 6.
Method 2: Using Windows PowerShell
There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
“Import-Module ServerManager”
“Uninstall-Windowsfeature Server-Gui-Shell –Restart”
or
“Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
Figure 7.
More information:
Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
Windows Server Installation and Upgrade
http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
More information:
Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=7887
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

Hi all,
I got some problems with update deployments these days.
I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
I did a deployment on this collection using this new Software Update Group.
I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
But there is no updates installed or displayed in Sofwtare Center.
Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
Thanks for your help.

Hi,
Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is DTS supported in SQL server 2008 R2 with Compatibility level 100?

We have a DTS package which executes one stored procedure.
We have recently switched SQL server compatibility level from 80 to 100.
On Compatibility level 80 it was working fine.
When i switched the level to 100, and executes DTS it shows successfully executed but stored procedure doenot really executed.
When i execute stored procedure in query analyzer it executed successfully and results were as expected.
Please let me know Is DTS supported in SQL server 2008 R2 with Compatibility level 100?

We have just implemented DTS packages on SQL2008R2 using the Backward Compatibility Tools (serarch for SQLServer2005_BC.msi)
You need the files:
SQLServer2005_BC.msi or SQLServer2005_BC_x64.msi
and SQLServer2005_DTS.msi
After you install these, perform the following -
1) To integrate DTS Designer with SSMS:
Copy the files SEMSFC.DLL, SQLGUI.DLL, and SQLSVC.DLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn
to %ProgramFiles%\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE
Copy the files SEMSFC.RLL, SQLGUI.RLL, and SQLSVC.RLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn\Resources\1033
to %ProgramFiles%\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Resources\1033
2) To integrate DTS Designer with BIDS:
Copy the files SEMSFC.DLL, SQLGUI.DLL, and SQLSVC.DLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn
to %ProgramFiles%\Microsoft Visual Studio 9.0\Common7\IDE
Copy the files SEMSFC.RLL, SQLGUI.RLL, and SQLSVC.RLL
from %ProgramFiles%\Microsoft SQL Server\80\Tools\Binn\Resources\1033
to %ProgramFiles%\Microsoft Visual Studio 9.0\Common7\IDE\Resources\1033
T

Unable to install Forfront TMG 2010 on Server 2008 R2 with Service Pack1

Hi I am Installing TMG 2010 on Server 2008R2 with service pack 1 ... then I am getting the error as below snapshot...kindly help me out
and I 've check event log then please find below snapshot :

Hi,
It seems that you have created an similar thread below:
Unable to install Forfront TMG 2010 on Server 2008 R2 with SP1
Since you have installed Service Pack 1 for Windows Server 2008 R2, please refer to the KB below:
Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2
If the solutions in the thread above are not helpful, please feel free to contact us.
Best regards,
Susie

Crystal Report Server 2008 integration with java application

Hi All,
Any of you having complete document about Crystal Report Server 2008 integration with java application....like source code and what are all the jar files needed? Or tell me that the implementation is same as Crystal Report Server XI R2?
Thanks

Have you looked at the BusinessObjects Enterprise XI 3.x Java Developer Guide?
[http://www.sdn.sap.com/irj/boc/sdklibrary]
Sincerely,
Ted Ueda

SQL Server 2008 R2 with Tools Evaluation Copy

Hello,
Is the SQL Server 2008 R2 software (SSMS, BIDS) still available for evaluation download? I was only able to find the Express edition, but I cannot open my solutions using Express. I tried to upgrade Express to Evaluation, but I get the below
error.
Rule Check Result
Rule "SQL Server 2008 R2 edition upgrade" failed.
The selected SQL Server instance does not meet upgrade matrix requirements.
OK
Thank you - Brett

Hello,
SQL Server 2008 R2 Evaluation Edition seems no longer available on Microsoft Download as you can see on the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=8158
However, if you are a MSDN subscriber you can download the full media of any paid edition of SQL Server 2008 R2, run SQL Server setup and choose Evaluation Edition
on the “Product Key” page of SQL Server setup.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to upgrade SQL Server 2008 R2 to SQL Server 2012 SP1

I'm encountering error after error, after successfully installing the upgrade advisor (which took some doing) and running it with essentially no warnings/errors (the one warning was on the connection strings, as I recall -- and all of the warnings had a
"fix after" status.
First failure involved SSRS and the inability to create the "managed account". Backed out the upgrade using http://sqldbanotes.blogspot.com/2013/10/how-to-fix-failed-in-place.html
Now the failure involves SSAS and unable to connect to analysis services with name MSSQLServerOLAPService. That is the logical name for the service, although it shows up as just MSSQLServer when looking at it in the services list. I tried
setting the service account to a local account as well as to Local System -- did not make a difference, the upgrade couldn't apparently find it regardless.
Has anybody successfully done an in place upgrade from SQL Server 2008 R2 to SQL Server 2012?

Hi Bob，
Thanks for your post and I am glad to hear that the issue is resolved. Thanks for you posting a reply to share your solution and I had marked it as answer. That way, other community members could benefit from your sharing.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

How to restore SQL Server 2008 database to SQL Server Express 2012

How to restore SQL Server 2008 database to SQL Server Express 2012.
I BACKED UP a SQL Server 2008 database from work, which runs the enterprise version of 2008, and I tried to RESTORE it to my new 64-Bit home PC which is running the new SQL Server Express 2012 64-Bit (Advanced Edition).
But if fails. I get the following message text.
Can anyone help me please. I thought restoring a 2008 database to the later version 2012 would be possible.
Here is the error message. Thanks.
TITLE: Microsoft SQL Server Management Studio
Restore of database failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the backup, or use a
backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)

ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the
backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)
Are you sure your database is SQL server 2008 from error message it seems your SQL server version is 2000.I guess you have multiple versions of SQL server.
AFAIK you cannot restore backup of SQL server 2000 to 2012 directly .Restore it first to SQL 2008/2008R2 or 2005 then take backup again of new database created and then you would be able to restore it on 2012.Its kind of intermediate way
Also make sure your DB size is less than 10 G as max DB size supported by Express edition is 10 G and if your DB size is more than 10 G restore will fail.
You are also trying to restore enterprise DB backup on express edition so you will loose enterprise features on express edition
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

XL Reporter in Sap 8.8 PL 16running On Server 2008 R2 and SQL 2008 R2

Within the above environment (XL Reporter in Sap 8.8 PL 16 running On Server 2008 R2 and SQL 2008 R2)
Xl reporter is loading and appears to work fine until you look at the spreadsheet result
It is completely blank except for the titles
Yet Excel Macros and the attachment paths are defined correctly
As can be seen when we export any report to Excel successfully
I've had another consultant look at my setup carefully just to be sure
He can't figure out why
Anyone with similar results
I would appreciate any comments
Georges Ostiguy

Even something as simple as a list of BP 's and phone number gives a blank report
When my friend who knows xl reporter much more than I do tried, he managed to get the
BP numbers but nothing further
I then brought him to another server with the same configuration , same result
He then tried it on one of his own servers with similar config = same result
Server 2008 Standard R2 64bit
MSSQL 2008 R2
SAP 8.8 PL 16
Sample demo database
I don't get it

Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!

Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

File opening throws RBS exception after migrating to a new farm with sql 2012

We have successfully migrated the SP 2010 -sql 2008 r2 wss_content to a new sp2010 farm with sql 2012. The old and new farms are configured for RBS - FIlestream.
In the new farm when tried opening a document we see the below exceptions in event viewer. The documents open fine for admin users and fail for others. I have verified all the permissions on the blob store file location and it looks good. Users have no
issue uploading new files over and below the set the file size limit.
Any suggestions on how to debug this would be great, do we need to rerun the .migrate() to realign any of the blob file references, we played around setting the max file size couple of times.
Event vwr on DB server -
FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to FILESTREAM data file ID 0x10001 does not exist or cannot be opened.
Event vwr on Front end -
Message ID:20, Level:ERR , Process:10580, Thread:36
Blob store <FilestreamProvider_1> threw this exception:
Operation: Unknown
BlobStoreId: 1
Log Time: 5/5/2014 8:00:49 PM
Exception: Microsoft.Data.SqlRemoteBlobs.BlobStoreException: There was a generic database error. For more information, see the included exception. ---> System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from
the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByteArray(Byte[] buff, Int32 offset, Int32 len)
   at System.Data.SqlClient.TdsParserStateObject.ReadInt64()
   at System.Data.SqlClient.TdsParserStateObject.ReadPlpLength(Boolean returnPlpNullIfNull)
   at System.Data.SqlClient.TdsParser.ProcessColumnHeader(SqlMetaDataPriv col, TdsParserStateObject stateObj, Boolean& isNull)
   at System.Data.SqlClient.SqlDataReader.ReadColumnHeader(Int32 i)
   at System.Data.SqlClient.SqlDataReader.GetBytesInternal(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at System.Data.SqlClient.SqlDataReader.GetBytes(Int32 i, Int64 dataIndex, Byte[] buffer, Int32 bufferIndex, Int32 length)
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   --- End of inner exception stack trace ---
   at Microsoft.Data.BlobStores.FilestreamBlobStore.FilestreamStoreLibraryBase.ReadBlob(Byte[] storePoolId, Byte[] storeBlobId)
   at Microsoft.Data.BlobStores.BlobStore.ReadBlobInternal(Request request)
BlobStoreException Code: OperationFailedAuthoritative
-Mash "http://sharepointxperiments.wordpress.com"

Migration - its a content db backup/restore/mount to new farm with sql 2012 from sql 2008 r2
Okie here are the results after we tried to narrow down the issue to few steps-
This issue happens on documents that are already existed in the content db prior to migration. we picked two docs from one library. DOC A and DOC B of close to same size..
DOC A - file size 64k, rbs max size set to 1mb.
Regular User and SPAdmin both can open fine, check out n check in successfully.
no entries made in event vwr of front end and DB server
DOC B - file size 64k, rbs max size set to 1mb
SPAdmin - can check out n open fine, but cannot check in back - file not available error
Regular User - cannot open the file - file not avialable at the url
          Both users can view doc properties at lib level..
Errors found in event vwr of DB server -
"FILESTREAM file named with GUID '00311100-0000-51eb-f3a8-0b387bc5c5ce' that belongs to
FILESTREAM data file ID 0x10001 does not exist or cannot be opened."
and
"The operating system returned the error '2(The system cannot find the file specified.)' while attempting 'FsDoHandler::CreateFile' on 'H:\Blob_Store\a06953ae-6f49-43b1-9c2d-fefb13bda9fe\1c581a4a-b450-4143-bc3d-8d419b49b0fb\0000eb20-000066ff-0002'
at 'fstrman.cpp'(2075)."
I incline to believe that the references for documents in blob store could have been corrupted for some documents during the migration. Any new docs uploaded to content or to blob are all accessible fine.
I'm not sure running .migrate() will re align the blob file references? Any ideas on how to effectively get this resolved..
-Mash "http://sharepointxperiments.wordpress.com"

Migrating SQL 2008 DB to SQL 2012 for SharePoint Farm

Our SharePoint 2013 Farm runs on ISCSI Disk on Windows 20008 R2 Standard SP1 Platform with SQL 2008 R2 Standard SP2.
Now we are planning to move this ISCSI Disk to another SQL 2012 Standard Platform and then upgrade the SQL 2008 Databse to SQL 2012. Can some one please let me know what challenges we might face during this implementation.

http://technet.microsoft.com/en-us/library/cc512723(v=office.14).aspx
It depends if you want to move all, or just some, of your databases to the new server. If you need to move all of them that link describes the process but in short;
Backup and restore all databases to the new server
Configure the server roles and logins for the SharePoint accounts on SQL
Create (or modify) your SQL alias to point to the new server

WSUS 3.2 on Server 2008 R2 with SQL 2012 STD

Similar Messages

Maybe you are looking for